Looking for Savage 24 22/410 22/20 or Stevens 22/410 For parts or to repair Good to poor condition

categories:GunsSporting Goods

23219 impressions

1520 views

Selling some new take off accessories. Pistol grip- $25 Recoil Pad-$20 Trigger guard assembly with action screws- $30 Take it all for $60

categories:GunsSporting Goods

31447 impressions

1055 views

Please read entire ad! Prices below are not negotiable!  No trades or offers! Prices and quantities are as follows for parts: Bolt, Chinese Type 56, complete w/floating firing pin, extractor, etc - SOLD Bolt, Chinese Type 56, stripped - $35 Dust cover, Chinese unmarked - $40 (1 available) Long Recoil spring, complete - SOLD OUT Short spring - SOLD OUT Take down latch, Russian - $10 Magazine, internal 10rd pinned to 5, Chinese - $50 (2 available) Spike Bayonet, complete - $65 (3 available with spike, bolt, spring & handle – new condition). Ammo bandolero pouch, Chinese - $25 Cleaning rod, Russian - $25 Cleaning rod, Chinese/NcStar - $15 Front sight base w/bayonet lug (with sight pin & block, no mounting pins included for front sight) - $60 Gas tube handguard, black molded plastic (Tapco perhaps?) - $25 Gas port reamer (carbon) cleaner, gas chamber - $15 (3 available) Oil bottle, square green plastic - $3 Oil bottle, steel (round) - $6 (2 available) Oil bottle(steel), pouch - $4 Ammo pouch, Russian - $10 (2 available) 10rd stripper clips, Czech made - $3 ea (6 available) These are the only parts I have... I have no trigger groups, gas tubes, stocks, other springs, slings, barreled actions, recoil lug bolts, spring loaded bolts, rear sights or parts, muzzle brakes or bladed bayonets available. No parting out pieces of the magazines, bayonet units or receiver bolts...you purchase the whole unit. If it’s not listed above then it’s not available.  All of you know how hard it is to find SKS parts nowadays... this is it! Items and pictures will be removed once parts have been sold...items will not be “saved/on hold/held ” unless paid for in full, no exceptions! Items are sold on a first come basis w/ payment in full.  Please don’t ask about the certain serial numbers on the mags...they are either Chinese or Russian only. Shipping available – Items combined to ship / I ship within Canada only. Ship costs starts at $20 Payment by EMT (shipped) or cash (F2F pickup)

categories:GunsSporting Goods

34492 impressions

1175 views

Here’s a list of my airsoft gear for sale: - Trigger (grey): $20 - Green pouch bag: $20 - Gloves: $10 - ICS Airsoft Glock (includes HPA): $550 (offer: $500, no lower) - Flashlight mount: $80 (offer: $50) - Valken rentals: $5 - Hi Capa 5.1 aluminum frame: $80 (offer: $50) - TLR-1 HL light: $50 - Glass hold Glock: $10 - Folding red dot: $80 - M4 mags: $50 - BB 20g: $10 - Red helmet: $10 - Optics Valken: $40 - GP1799: $300 (offer: $250) - Mask: $20 (offer: $15) - Parts: $5 - Trigger (gold): $30 (offer: $20) - Long tracer blue: $50 (offer: $40) - Pouch Glock: $20 (offer: $10) - Pouch: $10 (offer: $5) - Big pouch: $10 (offer: $5) - Drum mag: $150 - Pouch: $5 I’m selling all my airsoft gear I no longer use. I recently bought a house. Location: Edmonton, northeast. Text me 780-729-0565 if you’re interested.

categories:GunsSporting Goods

2954 impressions

194 views

Parting out this Gevarm E1 due to a cracked receiver. Cycled 5 rounds through it. Works flawlessly. Contact for prices. Front and rear sight sold. Magazines SOLD. Bolt group sold.Trigger group $SOLD. Barrel $SOLD!!!! Both stocks with plastics $130. Receiver not for sale, but some parts in the receiver left to sell.

categories:GunsSporting Goods

28740 impressions

1638 views

12 gauge. Barrel stripped with no ejection parts, $60. .

categories:GunsSporting Goods

32107 impressions

1613 views

SMLE/No1 MK111 Lee Enfield Cocking Piece X 5. Bought from Sarco but they sent the wrong ones, so these are not needed. The grip section on middle one in the image is full of grease/grime - it's not worn out. I paid $10 USD each for these. $50 for the lot plus postage or collect from Summerland. Lots more SMLE parts available - check other listings or feel free to ask.

categories:GunsSporting Goods

19090 impressions

599 views

Lee Enfield SMLE trigger and trigger guards, earlier type with swivel mount - $35 each plus postage or $100 plus postage for all three. Lots of other SMLE parts available

categories:GunsSporting Goods

16613 impressions

457 views

Lee Enfield SMLE stock set comprising of Butt stock, Fore-end and the two upper hand guards. This set is cut for the volley sight hence being suitable for an early MK111. This set is made from Beech and originally cnc made by Prestigious wood Stocks in Alberta. I'm no longer doing any kind of restoration work on SMLE's and have many of the other parts needed for military spec restorations - see other listings or feel free to message Collection from Summerland or postage at buyers cost.

categories:GunsSporting Goods

21363 impressions

1207 views

This is a 1940 Ishapore made No 1 MK111 ( not a MK111*) with mag cutoff and period correct RFI stamped bayonet. The hardware and wood set is good to excellent condition ( for an 84 year old rifle) and as far as I can tell, completely original from the factory. Bolt, receiver, Barrel, rear sight and nose cap are all matching numbers. The magazine isn't matching numbers but is RFI stamped. The bayonet is the short 12 inch "Indian Pattern" which I believe is a 1943 made bayonet. There are some visible repairs to the butt stock, maybe field repairs or post military use - I don't know. I can't make out the markings on the underside of the butt stock but it doesn't appear to be English or Latin script, possibly Punjabi, Bengali or Burmese. The barrel is probably nearing the end of it's life but I have taken this rifle to the range numerous times and it shoots fine with pretty good accuracy at 100 yards. I didn't really want to sell this one as it's a great historical piece, but I need to reduce the amount of Rifles and spare parts I have. PAL required etc - let me know if you have any questions or want more photos. Collection from Summerland BC preferred but shipping/post can be arranged at buyers cost.

categories:GunsSporting Goods

31322 impressions

1648 views

This is a correct WW Suhler Consortium M98 rifle. It is my opinion this rifle was reworked by the German military for use in WWII given the original WWII German armorers replacement. It is in original condition with all parts visible numbers matching. No import mark is present. Triggergaurd is unnumnered however it shows an Imperial H woth crown on the magazine floorplate. The magazine follower is an original German armorer Wafdenampt stamped replacement part. Buttplate is correctly unnumbered. Rating Definition: Excellent. Rifle retains 90-95 % crisp original finish. Stock: The walnut stock is correct and serialized 4473 to the rifle in good condition with a crack on the front left side between the upper barrel band and rear barrel band. Note: Stock pictures in listing show what looks like a crack in the mid area of the buttstock however there is no evidence of this on either the pistol grip side of the buttplate side where the stock is cracked whatsoever. Additional pics can be taken to show this. I hypothesize that this is perhaps a shrinkage in the wood due to rifles age. Rifle shows typical handling marks. No evidence of sanding. Bore: Bore is good with very pronounced lands and grooves visible. Rifle shows a great crown and has a smooth chamber. Mechanically sound, the rifle is in excellent condition. The action functions as it should.

categories:GunsSporting Goods

1829 impressions

285 views

Up for grabs is a parts project Harrington and Richardson 12 Guage Shotgun barrel. Dated/Patented 1900/1901 (see photo). Mechanism all works....just need a stock! The gun itself shows its age and the barrel is pitted. Hopefully the photos speak for themselves. OPEN FOR ANY OFFER! Located in East Vancouver BC.

categories:GunsSporting Goods

1569 impressions

145 views

I offer a friendly and reliable 3D printing service for people who need custom gear add-ons, protective covers, organizers, replacement plastic parts, and other small accessories for their setups. If you have a piece of equipment that needs a custom fit or you broke a part that’s hard to replace, I can help you bring it back to life. I use quality printers and strong materials, so the final product feels solid and looks clean. You can send me your own file or just tell me what you need and I’ll help get it designed. Fast turnaround, fair pricing, and local pickup or shipping available. Message me with your idea or a file and I’ll send you a quick quote.

categories:GunsSporting Goods

4411 impressions

167 views

If you want to extend the magazine latch on your CZ 457/ 455 / 452 I’m able to make these extension parts, I am also able to do these in a variety of colors. So if you would like one let me know, if you would like one in a different color then specify which (I’ll let you know if I don’t have the color of choice) if not then it’ll be in the standard black. Can ship but at buyer expense

categories:GunsSporting Goods

22711 impressions

1134 views

Selling/trading an Enfield No. 1 Mk III Sporter .303. Overall it's in fair shape but should be considered a parts gun as it's missing parts. BSA 1918 dated. Has the early cocking mechanism on the bolt. Steel is in good shape, shows some light rust which would clean up with some elbow grease. Butt stock and small top wood are in good shape, missing forestock. Bore could use a good scrubbing but is in decent shape. Receiver is drilled. Missing magazine and trigger mechanism. Will be sold as is with no warranty or guarantees. Looking for $195 shipped. Insurance by request on buyer. Open to all trades. Can send more pictures upon request. Pm or text/call 204 795 2850 for more info.

categories:GunsSporting Goods

1333 impressions

113 views

Selling/trading an Enfield No. 4 Mk I Sporter in .303. US Property stamped. It's in fair shape but should be considered a parts gun as it's missing some parts. Barrel has been shortened to 22.5". Steel is in good shape, some light freckling in the finish. Bridge has a been shaved down where strippr clips would have been fed. Wood stocks are in nice shape, normal bumps and bruises. Missing the complete bolt assembly and the magazine. Bore is in good shape. Would make a good parts gun. Will be sold as is with no warranty or guarantees. Looking for $195 shipped. Insurance by request on buyer. Open to all trades. Can send more pictures upon request. Pm or text/call 204 795 2850 for more info.

categories:GunsSporting Goods

1350 impressions

116 views

Up for grabs is a "Parts Gun" unless you're talented enough to repair it. It's a Squires and Bingham "Squibman" 22 calibre rifle. Manufactured in the Philipines, it shoots 22 Long Rifle.It is missing the magazine and the bolt to cock the gun (see photos). That part is not threaded. Safety is a touch sticky, but still works. Rifle has the usual wear and tear for its age (see photos). OPEN FOR OFFERS. Located in East Vancouver,BC. AGAIN....OPEN FOR OFFERS.

categories:GunsSporting Goods

1455 impressions

119 views

Selling for an older gentleman that does not have internet M1garand 30-06 and very nice shape looking for someone local with amy clips and all parts to put back scope, not included will include scope mount

categories:GunsSporting Goods

1706 impressions

301 views

-Athlon Btr  10 - 40 X 56mm GEN2 Long Range Scope, Brand New in Box. SFP, with zero stop,  Non illumination reticle -Cadex Strike Nuke chassis Od green -Tactical Solutions comp -Anarchy outdoors Extended Mag release -5 - 10 round magazines -Anarchy Outdoors extended bolt handle -Anarchy Outdoors oversized     bolt knob -MDT 20 Moa rail -Cadex 9 slot picatinny mlok rail for bipod -Cadex bag rider And all original parts included (Including original stock) Extra Anarchy Outdoors Extended bolt arm for T1x (Stainless) Must have PAL Local sale prefered

categories:GunsSporting Goods

2635 impressions

244 views

Chineses SKS parts (New Condition) All the parts are in Condition : new Tax rates shipping into your province NB, PEI, NS, NL, all pay 15% Ont, pays 13% Everybody else pays 5% GST only contact john at Doctor Deals 506-855-5377 e-transfer only Shipping through Canada Post, 18+ Signature

categories:GunsSporting Goods

3139 impressions

188 views

CanuckMagNorth Glock Lower Parts Kit V1 V1 Specs. & Features • Compatible with G17 / G19 / G26 / G34 / G45 / G49 • O.E.M Glock dimensions & clearances • Available in Mirror Polished finish for smooth trigger pull • Available in factory standard finish Available for purchase at canuckmagnorth.ca If you have any questions, requests, or inquires, contact anytime via email. Email canuckmagnorth@gmail.com • • • Tags: Ruger pc9, Tnw aero jr, AR-9, Fx9, Spc9, Ghm9, Sub2k, Glocks, PSA Dagger, P80, G17, G19/19X, G26, G34, G45, G47, Glock Magazines, Glock Accessories, Firearm Magazines, Glock Firearms, Gun Enthusiast, Tactical Gear, Shooting Sports, Self Defense, Gun Culture, Pistol Magazines, Glock 19, Glock 17, Magazine Capacity, Range Day, Gun Safety, 2A Community, Firearm Training, Glock Life, Glock Family, Custom Magazines, Kriss Vector, Canik TP9, Palmetto State Armory Dagger, Glock Fanatics, Glock Tactics, Glock Mods, Glock Safety, Glock Nation, Glock Love, Glock Hobby, Glock Owners, Glock Customization, Glock Performance, Glock Addict, Glock Culture, Glock Fans, Glock Aficionado, Glock Shooter, Glock Pistol, Glock Magazine, Glock Sights, Glock Trigger, Glock Gear, Glock Competition, Glock Collectible, Glock Marketplace, Glock Range Day, Glock Features, Glock Reviews, Glock Tech

categories:GunsSporting Goods

27729 impressions

1814 views