Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:GunsSporting Goods

2465 impressions

357 views

Brand new Sealed in original package Description: 3 MOA Red-Dot with Adjustable Brightness MOTAC: Motion-Activated Illumination 1x Magnification/30mm Clear Aperture Fully Multi-Coated / Aspheric Lens 100 MOA Windage & Elevation / 1 MOA IPC CNC-Machined Magnesium Housing TruHold Lockless Zeroing System Waterproof, IPX7-Rated Picatinny & KeyMod Mounts Made in the USA Sig Sauer engineered the ROMEO1 1×30 Open Reflex Sight to enhance your firearm’s aiming capabilities. Its 3-MOA holographic illuminated reticle offers a brilliant red dot with adjustable brightness and Motion-Activated Illumination System (MOTAC). You will see your targets with clarity thanks to a specially-designed, aspherical lens that generates flat and distortion-free images. To enhance transmission of light and to eliminate glare, the lens is also treated with high-performance full multi-coatings. To account for wind and ballistics, the windage and elevation adjusters offer 100 MOA ranges with 1 MOA increments. Designed to endure the toughest battlefield conditions, this sight is packaged into a compact, durable, lightweight, and waterproof housing. To increase durability, the housing was CNC-machined from a single piece of magnesium. Another highlight of the construction is a TruHold twin-spring adjustment system. It is designed and endurance-tested to withstand handgun recoil, deliver lock-less zeroing performance, and to return to zero with impeccable repeatability. Reticle: Red-Dot reticle: 3 MOA 1 MOA impact point correction 100 MOA windage and elevation adjustment range MOTAC: Motion-Activated Illumination Optical Performance: Magnification: 1x Molded glass aspheric lens High-performance coatings Unlimited eye relief Mounting Compatibility: Picatinny rails KeyMod panels Construction: CNC-machined magnesium body TruHold twin adjustment springs ensure a lock-less zeroing and repeatability Waterproof and fogproof Shock-resistant $520 shipped Not interested in trade Thanks

categories:Guns

15297 impressions

1536 views

Brand new Description: This optic goes on the 320 M17 – 320 LDC – 320 LDC PRO – 320X5 and 320X5 Legion Designed for fast, responsive target acquisition and accuracy, the ROMEO1PRO miniature open-reflex red dot sight was engineered to withstand the punishment of harsh environments. With an upgraded emitter for superior brightness and outstanding battery life, the ROMEO1PRO is capable of mounting to any SIG SAUER pistol or any other pistol machined to accept the ROMEO2 / PRO reflex sight interface and mounting hole spacing using the included M4 mounting screws. – Molded glass aspheric lens with high performance coatings for superior light transmittance and zero distortion – 3 MOA red dot with multiple brightness settings for rapid target engagement under a full range of lighting conditions – TruHold Lockless Zeroing System that utilizes twin adjustment springs designed to endure handgun recoil and return to zero shot after shot – New point-source emitter provides exceptional brightness with 12 settings (10 Daytime/2 NV), and 20,000+ hours of runtime – MOTAC (Motion Activated Illumination System) that powers up when it senses motion and powers down when it does not – Aircraft grade CNC Aluminum housing ensures a lifetime of reliable service – Dependable waterproof (IPX-7 rated for complete water immersion up to 1 meter) and fogproof performance – Ruggedized protective steel shroud included for extreme durability – SIG SAUER Electro-Optics Infinite Guarantee and SIG SAUER Features: Color: Black Weather Resistance: Yes Objective Lens Diameter: 30mm Magnification: 1x Lens Material: Glass Fabric/Material: Aircraft Grade Aluminum Attachment/Mount Type: Picatinny Reticle: 3 MOA Dot Gun Model: Sig Sauer Length: 1.8″ Height: 1.1″ Adjustment Type: MOA Battery Type: CR1632 Weight: 0.06 lb Included Accessories: Mounting Screws Brightness Settings: 12 Water Resistance Level: IPX-7 Illumination Color: Red Width: 1.2″ Battery Life: 20000 hours Objective Window Size: 28x18mm

categories:Guns

8744 impressions

866 views

Brand new The Magpul Bipod for M-LOK offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”. An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Guns

3947 impressions

443 views

Brand new The MBUS Rear Sight is adjustable for windage and fits 1913 Picatinny-railed weapons, specifically the AR15/M16 platform. Spring-loaded, folding back-up sight Same plane dual flip apertures Lightweight reinforced polymer construction All mounting hardware included Please note that MBUS sights are optimized for 5.56mm and 7.62mm NATO weapons. 9mm/45 and other pistol caliber weapons may not be fully compatible due to bullet drop at extended range.

categories:Guns

4466 impressions

341 views

Brand new The MBUS Rear Sight is a folding, spring-loaded flip-up sight. Constructed from impact resistant polymer, the MBUS sight is both lightweight and durable. It is compatible with all Picatinny rails, and, having been specifically tailored with the AR platform in mind, has the same height-over-bore as standard A2 iron sights. Two apertures are available for use, one large and one small, and both allow the sight to be folded in position. Can be adjusted for windage with a detent knob.

categories:Guns

2347 impressions

331 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:GunsSporting Goods

2493 impressions

421 views

TACTI-COOL SHOTGUN WITH MAGAZINE. PRACTICAL, COOL LOOKING, AND FUN TO SHOOT. THE 13-INCH BARREL MAKES IT EASY TO STORE FOR YOUR HUNTING ADVENTURE OR TO HAVE IT AS CAMP GUN. ALSO, YOU CAN TAKE ON THE HIKE OR ATV RIDE AS IT IS ONLY 33 INCH LONG. NO CHOKES. GREAT PUMP ACTION MAG-FED SHOTGUN FOR GREAT PRICE. SPRING ASSISTED. ADDITIONAL PICTURE CAN BE PROVIDED UPON REQUEST. Shipping is included

categories:Guns

5673 impressions

672 views

Brand new Manufacturer: Savage Model: 20005 Caliber:  .22 Long Rifle/.17 Mach 2 Capacity:  10 Rounds  Body: Steel Spring: Heat Treated Spring Wire  Follower:  Polymer Finish: Blued Fits: Savage MKII Rifles chambered In .22 Long Rifle or .17 Mach 2 Made in Canada

categories:Guns

7641 impressions

517 views

$700 Shipped. 30" Full Choke (TRAP) and rare rib that apparently has a great barrel. Wood Stock that is solid with no cracks but could not be re-finished well so sprayed with black paint. Shot a round of trap today, Light loads does not eject rounds but does with regular shot loads. Action spring could be cut down if wanted for doubles in trap. Not chambered for magnums. Located near UofW, can take more photos on request. Lenght of pull is 14" (thin butt pad) pwc@rogers.com

categories:GunsSporting Goods

8854 impressions

981 views