Never fired, just need to make room. Price is firm, local only.

categories:Sporting GoodsGuns

6880 impressions

997 views

The TMAG 30/5 AR/M4 GEN M3 is a highly reliable, translucent, 30-round magazine for STANAG-compatible weapons chambered in 5.56×45 NATO/.223 Remington. Molded from a durable translucent material with an olive drab hue, it provides shooters the ability to visibly verify various ammunition types and the current round count. Featuring ribbed front and rear straps for improved purchase during magazine changes, the sides are left smooth to enhance visibility. Like the rest of the GEN M3 family of magazines, the TMAG incorporates similar internal geometry which translates into unmatched reliability when firing. The four-way, anti-tilt follower is paired with a durable USGI-spec, stainless-steel spring with a painted coil, which maintains the “gas gauge” capability from the “Window” magazine product line. The magazine body is clearly marked to show approximate round counts when inserted in a magazine well, and the paint-pen dot matrix allows for custom markings to be applied by the shooter. The TMAG’s low-profile floor plate also allows for compatibility with the full line of PMAG® AR/M4 GEN M3 floor-plate accessories. The TMAG is optimized for Colt-spec AR15/M4 platforms, but modified internal and external geometry also permits operation with a range of other weapons such as the WK180C, HK® 416/MR556A1/M27 IAR, FN® SCAR™ MK 16/16S, and others. Made in the USA. Available for shipping only. Taxes will be added.

categories:Sporting GoodsGuns

22816 impressions

637 views

Brand new take off from my ruger pc9

categories:Sporting GoodsGuns

20412 impressions

937 views

Like new condition.

categories:Sporting GoodsGuns

2129 impressions

459 views

Brand new Sling Mount Kit – TYPE 1 can be added to either side of the SGA®, MOE® Rifle, MOE® Fixed Carbine, MOE® AK, Zhukov-S, Hunter 700, and Hunter X-22 Stocks for use with push-button QD Sling Swivels or our own Magpul® QDM. Heavy-duty black phosphatized steel construction easily installs with provided hardware. Swivels not included. Made in the USA.

categories:Sporting GoodsGuns

3621 impressions

564 views

Next generation impact- and crush-resistant polymer construction • Paint-pen dot matrix panels allow identification marking • Self-lubricating follower increases reliability • Flared floorplate aids handling • Easy to disassemble for maintenance A larger-capacity version of the proven PMAG 5 7.62 AC. Magpul®’s PMAG 10-Round 7.62 AC Magazine uses next generation impact- and crush-resistant polymer construction to create this durable and extremely reliable polymer magazine for .308 Winchester-based family of cartridges. The self-lubricating follower increases reliability. Paint-pen dot matrix panels on the bottom of the body allow identification marking. Flared floorplate aids magazine handling and is super easy to disassemble for maintenance. Equipped with a long-lasting stainless steel spring. Compatible with short-action AICS-spec bottom metal and cartridges built on a 0.470" case head. Accepts cartridge lengths up to 2.86".

categories:Sporting GoodsGuns

10229 impressions

596 views

brand new, swapped out off gun when purchased for a different chassis. this one is grey in color. came off ruger american SA. text or email is best

categories:Sporting GoodsGuns

4414 impressions

362 views

Almost new savage 110 with 25 power scope

categories:Sporting GoodsGuns

13762 impressions

1166 views

*The PMAG 17 GL9 is compatible with all full-size, compact, and sub-compact double-stack Glock 9mm variants with some protrusion below the grip. *Made in U.S.A. * 35$ Each -------------------------------------------------------------------- Shipping with extra cost. Text or email please. You could also check my other ads, there might be something you like. Thanks!

categories:Sporting GoodsGuns

33517 impressions

2348 views

The Model 110 Hog Hunter. adjustable AccuTrigger™ provides a light, crisp pull. The rifle is built on Savage’s time-tested 110 platform but with a modern design and improved ergonomics. A rugged synthetic stock holds the 20-inch, medium contour, carbon steel barrel, which features iron sights and is threaded. Low round count and has a rail. Great shooting rifle. 403-805-38 six seven

categories:Sporting GoodsGuns

4448 impressions

671 views

Brand new Designed for use with all M-LOK compatible Hand Guards and Forends M-LOK Aluminum Rail Sections allow the attachment of various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc. Machined from milspec-anodized aluminum, M-LOK Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. 5 Slots Max overall length of 2.5″.

categories:Sporting GoodsGuns

1619 impressions

339 views

Brand new While both the UBR® and STR® come with TYPE 1 push-button QD swivel sockets pre-installed on the left side of the stock, this Sling Mount Kit– TYPE 2 can be installed on the opposite side to add additional push-button QD Sling Swivels or our own Magpul® QDM. Additionally, for running ambidextrous sling swivels on the SGA®, MOE® Rifle, MOE® Fixed Carbine, MOE® AK, Zhukov-S, Hunter 700, and Hunter X-22 Stocks, this TYPE 2 Kit must be utilized in conjunction with the optional TYPE 1 Kit. Heavy-duty black phosphatized steel construction easily installs with the UBR or STR's original hardware, or with the hardware included with the TYPE 1 Kit. Swivels not included. Made in USA

categories:Sporting GoodsGuns

2378 impressions

397 views

Brand new Compatible with short action AICS (Accuracy International Chassis Systems) pattern bottom metal and cartridges built on a 0.470" case head such as 7.62x51/.308 Winchester, 7mm-08 Remington, 6.5mm Creedmoor, .260 Remington, .243 Winchester, and others Accepts a cartridge overall length of up to 2.86" Next-generation impact and crush resistant polymer construction Self-lubricating follower for increased reliability Long life stainless steel spring Paint pen dot matrix panels on the bottom of the body to allow for identification marking Flared floorplate aids magazine handling and is easy to disassemble for maintenance NOTE:  Not compatible with smaller base diameter cartridges such as .220 Swift, .223 Remington, .300 AAC Blackout, etc. or larger short action magnums. In addition, due to the wide variety and potential combinations of aftermarket receivers, stocks, chassis, and bottom metal that accept AICS pattern mags, minor fitting may be required. Not compatible with Accuracy International AE rifles or semi-auto platforms utilizing SR25/M110 pattern magazines.

categories:Sporting GoodsGuns

33018 impressions

732 views

Brand new Designed for use with all M-LOK compatible Hand Guards and Forends M-LOK Aluminum Rail Sections allow the attachment of various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc. Machined from milspec-anodized aluminum, M-LOK Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. 7 Slots Max overall length of 3.3″.

categories:Sporting GoodsGuns

1534 impressions

319 views

Brand new XT™ Rail Panels offer low-profile 1913 Picatinny rail coverage. The semi-rubbery material offers improved control and rail protection. Easily cut for custom lengths, sections can mount next to each other to form a visually continuous cover. Each panel fits one side of a carbine-length rail.  One panel per package.

categories:Sporting GoodsGuns

1678 impressions

365 views

Brand new The Enhanced Trigger Guard is a black anodized aluminum drop in replacement for the AR15/M4 weapons platform. It features a shallow "V" shape for better use of gloves in tactical shooting or cold weather operations. The Enhanced Trigger Guard is non-folding, has rounded edges, and fills the annoying "gap" at the rear of the standard trigger guard. All mounting hardware included. Made in USA

categories:Sporting GoodsGuns

2261 impressions

375 views

Brand new Designed for use with all M-LOK compatible Hand Guards and Forends M-LOK Aluminum Rail Sections allow the attachment of various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc. Machined from milspec-anodized aluminum, M-LOK Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. 3 Slots Max overall length of 1.6″.

categories:Sporting GoodsGuns

1997 impressions

399 views

Brand new All steel construction Case hardened and finished with Melonite QPQ™ for extreme resistance to wear and corrosion Mounts on any MIL-STD-1913 Picatinny/STANAG 4694 rail Windage adjustable with low-profile knob – no tools required Positive detents in both the up and down positions Standard AR height over bore when deployed, 45 deg. offset right-hand side NOTE: Only compatible with MBUS Pro OFFSET Front sight MAG525.

categories:Guns

2611 impressions

370 views

Brand new All steel construction Steel, rectangular sight post selectable between Match and Standard widths   —.040” Match width for increased precision   —.060” Standard width for maximum visibility Case hardened and finished with Melonite QPQ™ for extreme resistance to wear and corrosion Mounts on any MIL-STD-1913 Picatinny/STANAG 4694 rail including receiver-height gas blocks Elevation adjustment knob – no tools required Positive detents in both the up and down positions as well as on the elevation knob Standard AR height over bore when deployed, 45 deg. offset right-hand side NOTE:  All MBUS Pro Front Sights now come factory-equipped with the Enhanced Front Sight Post. There is no need to order one separately unless you are retrofitting an older MBUS Pro front sight. Enhanced Front Site Posts are not compatible with standard MBUS polymer sights. Only compatible with MBUS Pro OFFSET Rear sight MAG526.

categories:Guns

2778 impressions

410 views

Brand new Designed for use with all M-LOK compatible hand guards and forends. The 11-slot M-LOK Polymer Rail Sections provide a cost effective method of attaching various 1913 Picatinny-Spec rail-mounted accessories such as lights, vertical grips, etc. Injection molded from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight. The M-LOK Polymer Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly to M-LOK slots on either aluminum or polymer hand guards and forends is included. 11 usable slots and a max overall length of 4.9". Mounts directly to M-LOK compatible systems. Multi-directional mounting Intermediate spacing option Lightweight reinforced polymer Cammed T-nuts Recoil / impact mitigation lugs Made in USA

categories:Guns

2692 impressions

367 views

Brand new Designed for use with all M-LOK compatible Hand Guards and Forends M-LOK Aluminum Rail Sections allow the attachment of various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc. Machined from milspec-anodized aluminum, M-LOK Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. 9 Slots Max overall length of 4.1″.

categories:Guns

2063 impressions

345 views