Henry Single Shot Rifle, 350 Legend, H015-350 Price reduce from 759.99$ to 719.99$ Condition : new Tax rates shipping into your province NB, PEI, NS, NL, all pay 15% Ont, pays 13% Everybody else pays 5% GST only contact john at Doctor Deals 506-855-5377 e-transfer only Shipping through Canada Post, 18+ Signature Warranty available Specifications Barrel Length : 22″ Barrel Type : Round Blued Steel Rate of Twist : 1:16 Overall Length : 37.5″ Weight : 7.10 lbs. Receiver Finish : Blued Steel Rear Sight : Fully Adjustable Folding Leaf Front Sight : Brass Bead Scopeability : Drilled and Tapped Scope Mount Type : Weaver 82 Stock Material : American Walnut Buttplate/Pad : Black Solid Rubber Recoil Pad Length of Pull : 14″ Safety : Rebounding Hammer Best Uses :Target/Hunting/Large Game Embellishments/Extras : Swivel Studs

categories:Sporting GoodsGuns

5703 impressions

695 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Sporting GoodsGuns

2954 impressions

494 views

Brand new The M-LOK Extended Cantilever Scout Mount provides forward light positioning to minimize shadowing effects The extended cantilever design is low profile and optimized for Magpul MOE SL, Zhukov and MOE M-LOK Shotgun forends as well as compatible aluminum M-LOK handguards It fits Surefire, Scout Light and Streamlight and ProTac rail lights It directly mounts to M-LOK compatible systems and includes cammed t-nuts, recoil/impact mitigation lugs and has backwards MOE compatibility with optional adapters *Note: NOT compatible with SureFire DS00 Dual Activation Switch or M600DF Scout Light The Scout Mount will not properly fit Bushmaster ACR Hand Guards *The MOE Scout Mount is optimized for rifles with a factory A2 front sight base Rifles with a railed gas block and folding front sight may have clearance issues depending on the size/shape of the gas block, sight, and installed light Made in USA

categories:Sporting GoodsGuns

3654 impressions

429 views

Chiappa Double Badger Rifle 22LR/410.19" barrels, wood buttstock and for-end, double trigger.Each barrel is selectively fired by its own trigger and controlled by a top tang safety that is easy to use quickly and reliably. The Double Badger comes with a Williams Fiber Optic Ghost ring and front sight as well as a 3/8" dovetail rail for mounting optics. Designed for portability, pushing the trigger guard down allows the Double Badger to fold in half for a total overall length of 21.20" making storage and transport easy. Gun is in good condition. No trades and not taking offers. Local is preferred, but will ship at buyers expense. Further Lost insurance can be purchased by the buyer. Valid Pal a Must and will be verified for reference number. Please send message to: medal1958@gmail.com

categories:Sporting GoodsGuns

13732 impressions

949 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Sporting GoodsGuns

2743 impressions

407 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Sporting GoodsGuns

2775 impressions

492 views

Brand new The MBUS Rear Sight is adjustable for windage and fits 1913 Picatinny-railed weapons, specifically the AR15/M16 platform. Spring-loaded, folding back-up sight Same plane dual flip apertures Lightweight reinforced polymer construction All mounting hardware included Please note that MBUS sights are optimized for 5.56mm and 7.62mm NATO weapons. 9mm/45 and other pistol caliber weapons may not be fully compatible due to bullet drop at extended range.

categories:Guns

4912 impressions

379 views

Brand new The MBUS Rear Sight is a folding, spring-loaded flip-up sight. Constructed from impact resistant polymer, the MBUS sight is both lightweight and durable. It is compatible with all Picatinny rails, and, having been specifically tailored with the AR platform in mind, has the same height-over-bore as standard A2 iron sights. Two apertures are available for use, one large and one small, and both allow the sight to be folded in position. Can be adjusted for windage with a detent knob.

categories:Guns

2517 impressions

368 views

Brand new The Magpul Bipod for M-LOK offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”. An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Guns

4193 impressions

485 views

This is a great lightweight shotgun for cabin, boat, ATV, and hunting. Also, nice to have it as the backup gun in the bush. New and improved, comes with 3 chocks and a rifle sight. NON-RESTRICTED Calibre: 3"/ 76 mm GAUGE: .410 GA/ (12 GA separate also available) BARREL LENGTH: 13" STOCK: SYNTHETIC STOCK TYPE: HAMMER OUTSIDE OVERALL LENGTH: Folded 51/ Full Length 74 cm WEIGHT: 1.66 kg chokes

categories:Guns

19340 impressions

2163 views

Brand new in the box This is a great lightweight shotgun for cabin boats, ATVs, and hunting. Also nice to have it as a backup gun in the bush. New and improved, comes with 3 chocks and rifle sight. NON-RESTRICTED Caliber: 3"/ 76 mm GAUGE: 12 GA BARREL LENGTH: 13"/ 33 mm STOCK: SYNTHETIC STOCK TYPE: HAMMER OUTSIDE OVERALL LENGTH: Folded 51/ Full Length 74 cm WEIGHT : 2.2 kg Set of chokes and key included

categories:Guns

12503 impressions

1363 views

9mm, shoulder sling, Fold up rifle easily fits in small range bag or backpack. Firm on price. Not looking for any trades. Willing to meet in Calgary or can ship anywhere in Canada please contact me by number via text

categories:Guns

5061 impressions

527 views

It comes with 3 x 30 rounds magazines (blocked to 5), Aimpoint T1 (4 MOA), B&T short QD foregrip, backup folding sights, cleaning kit, single point rifle sling, carrying bag, owner's manuals (APC9 & Aimpoint T1) and trigger lock. Shipping available upon confirmation of Rpal

categories:Guns

6567 impressions

520 views

01.Caldwell XLA 9-13" Shooting Bipod-$50.00 02.Caldwell 9-13" Shooting Bipod-$50.00 03.Accumax Premium Carbon Fiber 6-9" Shooting Bipod-SOLD 04.6-8" Shooting Bipod-$50.00 05.7-11" Shooting Bipod-$50.00 06.Harris Engineering S-BR Hinged Base 6 - 9-Inch BiPod-$180.00 01.Barska FLX 260 Lumen Tactical Flashlight & Vertical Grip-$120.00 02.Cadex Defence Grip-$30.00 03.CAA MVG- Short Forearm Vertical Grip-$30.00 04.Tactical Push-On QR Vertical Forward Folding Foregrip Grip for Picatinny Rails-$45.00 05.Foregrip/BiPod for Picatinny Rails Mounts – Black-SOLD Please send message to:medal1958@gmail.com

categories:Sporting GoodsGuns

27547 impressions

2944 views

Little Badger 22 LR Single Shot Break Open Rifle 500.140 Condition : new Tax rates shipping into your province NB, PEI, NS, NL, all pay 15% Ont, pays 13% Everybody else pays 5% GST only contact john at Doctor Deals 506-855-5377 e-transfer only Shipping through Canada Post, 18+ Signature Warranty available The Little Badger is the ultimate packable survival gun. Available in .22lr or .22WMR and now 17HMR. This lightweight, ultra-compact, break-open rifle is designed to go anywhere at any time. When the action is opened and the gun folded, it measures a mere 17” overall length and stows neatly in an included pack/case. The wire frame stock keeps weight to a minimum and the integrated shell holder in the back holds twelve cartridges so ammo is always at the ready. The Little Badger comes equipped with an M1 Carbine style front and rear sight. Picatinny rails are mounted top, bottom and on both sides just forward of the receiver for mounting optics and accessories. An optional handle/cleaning kit combination accessory screws into the bottom of the receiver. Compact length and weighing only 2.9lbs, the Little Badger can truly be taken and ready for use just about anywhere! MAKE Chiappa MODEL Little Badger FIREARM CLASS Non-Restricted CALIBRE 22lr MAGAZINE CAPACITY single shot BARREL LENGTH 18.5"

categories:Sporting GoodsGuns

29083 impressions

2347 views

Brand new rifle...never been fired....paid $2600 for the rifle and scope. Make: Christensen Arms 14 Ridgeline Ultra Mag 1-10 300 ultra mag. Scope: 6-24 x50 Nikon BDC reticle. Includes: Factory muzzle brake Padded shoulder sling Adjustable folding bipods.

categories:Guns

6019 impressions

246 views

If you want to make better steady shots on your game from gophers,coyote,bear,deer,elk,Moose. Our tripod shooting rest is not only the only shooting rest that has 2 rests on one shooting rest.. designed by a Canadian from St Albert Alberta Buy direct from us. Or see us at 1 of the many gun shows we do in Alberta,Saskatchewan . You can set this one rest into 2 positions to use at any time while hunting or shooting for better shot placement.you can go from prone(laying dow) to all other positions ,kneeling position ,to a full standing position. Steady shooter tripods work for shooters from 4 ft tall to 6'6"+ Fully ajustable and suited for all applications to steady your rifle. Made of the best materials. Other stands out there being sold are not built as well as ours but you will pay from $180-$250.00 plus tax limited time price : Shipping included : Buy 1- TRIPOD = $135.00 Buy 2 -TRIPODS = $240.00 Buy 3 -TRIPODS = $350.00 Above prices INCLUDES shipping. BUY NOW AND SAVE. Call us and order a FEW TRIPODS SAVE $$$ and make better shots,also use them as a walking stick too. E-TRANFERS on all orders Thanks for buying the best made SHOOTING REST ,Tripod. STEADY SHOOTER TRIPODS. (They make a great gift for the hunter that has everything.) 306-221-9599 text or call More information on the shooting tripod you may want to read below. The SteadyShooter is the best portable shooting support on the market. Price is about the best price on the market.   The SteadyShooter is light-weight (approx. 985 grams or 2 pounds) and the legs fold together which makes it easy to carry with you at all times when hunting.   SteadyShooter has a fully-adjustable side rest which can be used to instantly shoot from a kneeling or sitting position. In my experiences this is a very useful feature as sometimes getting up for a standing shot can spook your animal away. To my knowledge, no other shooting rest on the market has this feature.   The above-mentioned side-rest  can also be used to allow shooting from the prone position.   The legs have two telescoping sections so they can be varied in length from 32" to 75".  However, using the side rest you can support your rifle at a height as low as 6" (ie. prone position).   The SteadyShooter sets up in seconds when a hunter carries it with the legs extended to his/her preferred length.   The V-yoke rotates 360 degrees and provides a very steady support for your rifle.   The V-yoke and side-rest are both nicely padded with soft rubber to protect your gun.   SteadyShooter folds into a small convenient package (3½" X 35") for transport and storage.   The legs are aluminum and the other parts are molded plastic and/or rubber.

categories:Sporting GoodsGuns

79840 impressions

7872 views