Brand new New Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts. The SCP-3001 is designed for use on Picatinny rails and features one classic ring and one interface ring, which can be rotated as to position the interface/accessory in either the 12-o'clock or 3-o'clock position. The SCP-series of mounts can also be rotated for left or right handed shooters, and feature two separate side clamps. 0 MIL/0 MOA Height: 30 mm/1.18” Clearance: 8 mm/.314" (from the bottom of the tube to bridge of the mount body) Length: 108 mm/4.25” Weight: 147 g/5.2 oz 10-degree wedge included Note: Will not fit the SAKO S20 or rifles with 2-piece rails

categories:GunsSporting Goods

9150 impressions

411 views

Brand new New Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts. The SCP-3000 is designed for use on Picatinny rails and features one classic ring and one interface ring, which can be rotated as to position the interface/accessory in either the 12-o'clock or 3-o'clock position. The SCP-series of mounts can also be rotated for left or right handed shooters, and feature two separate side clamps. 0 MIL/0 MOA Height: 24.5 mm/1” Clearance: 3.4 mm/.133" (from the bottom of the tube to bridge of the mount body) Length: 108 mm/4.25” Weight: 134 g/4.7 oz 10-degree wedge included Note: Will not fit the SAKO S20 or rifles with 2-piece rails

categories:GunsSporting Goods

8625 impressions

338 views

Brand new The M-LOK QD Sling Mount provides an alternate attachment point for the Magpul MS4 Sling and other push-button QD slings. Machined from Mil-Spec anodized aluminum, the low-profile M-LOK QD Sling Mount features beveled edges to reduce snagging and has an anti-rotation design that prevents swivels from spinning. Mounts to all M-LOK compatible hand guards and forends Accepts any push-button QD swivel as well as the Magpul QDM Machined from Mil-Spec annodized aluminum for durability and light weight Beveled edges reduce snagging Anti-rotation design prevents swivels from spinning

categories:Guns

2426 impressions

413 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:GunsSporting Goods

2465 impressions

357 views

Brand new The ROMEO3XL open reflex sight is the ideal sighting solution for MSR rifles, shotguns, carbines, submachine guns, and full-size handguns. The ROMEO3XL features a high transmittance red notch reflector for excellent brightness, light transmittance, and zero distortion. 3 MOA  red dot with multiple intensity settings ensure rapid target engagement under a full range of lighting conditions. The large 35mm lens offers an unparalleled field of view in an open reflex sight. High transmittance red notch reflector for excellent brightness, light transmittance, and zero distortion 3 MOA dot with multiple intensity settings for rapid target engagement under a full range of lighting conditions MOTAC (motion activated illumination system) powers up when it senses motion and powers down when it does not Side loading CR2032 battery Comes with a low-profile M1913 Picatinny mount Aircraft grade CNC alluminum housing Dependable waterproof (IPX-7) and fog proof performance Finish: Black Height: 1.4 Inches Length: 2.1 Inches Style: Reflex Weight: 1.5 Ounce Width: 1.3 Inches Magnification: 1 Adjustment Click Value: 1 MOA Warranty: Sig Sauer Electro Optics Infinite Guarantee Battery Type: CR2032 Reticle Color: Red Housing Material: Aluminum

categories:GunsSporting Goods

4868 impressions

422 views

Brand new Sealed in original package Description: 3 MOA Red-Dot with Adjustable Brightness MOTAC: Motion-Activated Illumination 1x Magnification/30mm Clear Aperture Fully Multi-Coated / Aspheric Lens 100 MOA Windage & Elevation / 1 MOA IPC CNC-Machined Magnesium Housing TruHold Lockless Zeroing System Waterproof, IPX7-Rated Picatinny & KeyMod Mounts Made in the USA Sig Sauer engineered the ROMEO1 1×30 Open Reflex Sight to enhance your firearm’s aiming capabilities. Its 3-MOA holographic illuminated reticle offers a brilliant red dot with adjustable brightness and Motion-Activated Illumination System (MOTAC). You will see your targets with clarity thanks to a specially-designed, aspherical lens that generates flat and distortion-free images. To enhance transmission of light and to eliminate glare, the lens is also treated with high-performance full multi-coatings. To account for wind and ballistics, the windage and elevation adjusters offer 100 MOA ranges with 1 MOA increments. Designed to endure the toughest battlefield conditions, this sight is packaged into a compact, durable, lightweight, and waterproof housing. To increase durability, the housing was CNC-machined from a single piece of magnesium. Another highlight of the construction is a TruHold twin-spring adjustment system. It is designed and endurance-tested to withstand handgun recoil, deliver lock-less zeroing performance, and to return to zero with impeccable repeatability. Reticle: Red-Dot reticle: 3 MOA 1 MOA impact point correction 100 MOA windage and elevation adjustment range MOTAC: Motion-Activated Illumination Optical Performance: Magnification: 1x Molded glass aspheric lens High-performance coatings Unlimited eye relief Mounting Compatibility: Picatinny rails KeyMod panels Construction: CNC-machined magnesium body TruHold twin adjustment springs ensure a lock-less zeroing and repeatability Waterproof and fogproof Shock-resistant $520 shipped Not interested in trade Thanks

categories:Guns

15301 impressions

1536 views

Brand new Description: This optic goes on the 320 M17 – 320 LDC – 320 LDC PRO – 320X5 and 320X5 Legion Designed for fast, responsive target acquisition and accuracy, the ROMEO1PRO miniature open-reflex red dot sight was engineered to withstand the punishment of harsh environments. With an upgraded emitter for superior brightness and outstanding battery life, the ROMEO1PRO is capable of mounting to any SIG SAUER pistol or any other pistol machined to accept the ROMEO2 / PRO reflex sight interface and mounting hole spacing using the included M4 mounting screws. – Molded glass aspheric lens with high performance coatings for superior light transmittance and zero distortion – 3 MOA red dot with multiple brightness settings for rapid target engagement under a full range of lighting conditions – TruHold Lockless Zeroing System that utilizes twin adjustment springs designed to endure handgun recoil and return to zero shot after shot – New point-source emitter provides exceptional brightness with 12 settings (10 Daytime/2 NV), and 20,000+ hours of runtime – MOTAC (Motion Activated Illumination System) that powers up when it senses motion and powers down when it does not – Aircraft grade CNC Aluminum housing ensures a lifetime of reliable service – Dependable waterproof (IPX-7 rated for complete water immersion up to 1 meter) and fogproof performance – Ruggedized protective steel shroud included for extreme durability – SIG SAUER Electro-Optics Infinite Guarantee and SIG SAUER Features: Color: Black Weather Resistance: Yes Objective Lens Diameter: 30mm Magnification: 1x Lens Material: Glass Fabric/Material: Aircraft Grade Aluminum Attachment/Mount Type: Picatinny Reticle: 3 MOA Dot Gun Model: Sig Sauer Length: 1.8″ Height: 1.1″ Adjustment Type: MOA Battery Type: CR1632 Weight: 0.06 lb Included Accessories: Mounting Screws Brightness Settings: 12 Water Resistance Level: IPX-7 Illumination Color: Red Width: 1.2″ Battery Life: 20000 hours Objective Window Size: 28x18mm

categories:Guns

8749 impressions

866 views

Brand new The Magpul Bipod for M-LOK offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”. An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Guns

3948 impressions

443 views

Brand new The MVG is a light weight, inexpensive vertical foregrip that attaches directly to M-LOK compatible hand guards and forends with no additional Picatinny rails required. Made from the same high quality polymer as other Magpul products, the M-LOK MVG uses the new Magpul TSP texture for positive control in all environments.  With rounded contours and a shorter length, it has been optimized for use with the "thumb break method" of shooting and can also be used as a traditional vertical foregrip. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. Made in USA

categories:Guns

2404 impressions

349 views

Brand new Designed for use with all M-LOK compatible hand guards and forends. The 11-slot M-LOK Polymer Rail Sections provide a cost effective method of attaching various 1913 Picatinny-Spec rail-mounted accessories such as lights, vertical grips, etc. Injection molded from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight. The M-LOK Polymer Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly to M-LOK slots on either aluminum or polymer hand guards and forends is included. 11 usable slots and a max overall length of 4.9". Mounts directly to M-LOK compatible systems. Multi-directional mounting Intermediate spacing option Lightweight reinforced polymer Cammed T-nuts Recoil / impact mitigation lugs Made in USA

categories:Guns

2485 impressions

334 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:GunsSporting Goods

2494 impressions

421 views

BNIB HBI-10237-01 Buyers pay the shipping, contact me for an estimate. CZ Bren 2 Handguard 13.8″ M-Lok (GEN 2) The HBI 13.8″ handguard for the Bren 2 MS is ideal for 14″ barrel models in both 556/223 and 7.62×39 calibers. Our 13.8″ handguards are designed to truly “free float” the barrel and provide the operator with over 3x the support hand area and over 7x the M-Lok positions as compared to the factory Bren 2 MS handguard. PEQ-15/ATPIAL type IR sight systems and peripheral switches are easily mounted out front above your support hand thanks to a full length continuous 1913/picatinny top rail. Our extended Bren 2 MS handguards feature a window at the gas block that has been carefully designed to allow operator access to gas system adjustments while in use. The gas block window is bridged with a removable 1913 plate. With the 1913 plate removed, the gas block and regulator are exposed for complete disassembly and cleaning. This two piece design allows access to the gas system without having to remove the handguard shroud from the weapon. Additionally, the use of two countersunk screws to secure the 1913 plate means that sighting systems mounted the to 1913 plate WILL retain zero when the plate is removed/reinstalled after cleaning. Every handguard includes an integrated QD mounting plate system for seamless sling integration on either the left or right side. Additionally, we are proud to offer a direct mount light variant compatible with Surefire® 300/600, StreamLight® Protac Rail, Modlite 18650 series, and other popular bodies. The simple and robust mounting design replaces a single M-Lok position with body specific mounting geometry for weapon lights. This light mounting solution offers the simplest, lowest profile, lightest weight, and arguably most rigid light body integration at no additional cost. If your application requires a weapon light, you might want to consider this option. Features 13.8″ M-Lok Handguards for the CZ Bren 2 MS Gen 2 Two Piece Design With Direct Access to Gas Regulator M-Lok Accessory Interface, Full Length 1913 Top Rail QD Mounting Plate Included Optional Direct Mount Light Geometry for select Surefire® and StreamLight® Bodies Total Weight Installed is 12.04 oz (Factory Bren 2 MS Pistol Handguard is 10.27oz) Machined Aluminum 6061, Anodized MIL-A-8625 Type 3 Hard Coat Multiple Patents Pending Designed and Manufactured completely in USA. 922r Compliant.

categories:Guns

8260 impressions

562 views

Brand new in the box This is a great lightweight shotgun for cabin boats, ATVs, and hunting. Also nice to have it as a backup gun in the bush. New and improved, comes with 3 chocks and rifle sight. NON-RESTRICTED Caliber: 3"/ 76 mm GAUGE: 12 GA BARREL LENGTH: 13"/ 33 mm STOCK: SYNTHETIC STOCK TYPE: HAMMER OUTSIDE OVERALL LENGTH: Folded 51/ Full Length 74 cm WEIGHT : 2.2 kg Set of chokes and key included

categories:Guns

11485 impressions

1260 views

Color: Black Type: Lightweight, Target, Budget Friendly Weight: 26OZ Fitment: Ruger 10/22 **WILL NOT FIT MODELS WITH BULL BARELL WITHOUT MODIFICATION** Made in USA WE SHIP CANADA WIDE. YOU MUST BE 18+ TO PURCHASE. PLEASE EMAIL US TO INQUIRE EMAIL US WITH ANY QUESTIONS!

categories:GunsSporting Goods

8495 impressions

946 views