Brand new New Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts. The SCP-3001 is designed for use on Picatinny rails and features one classic ring and one interface ring, which can be rotated as to position the interface/accessory in either the 12-o'clock or 3-o'clock position. The SCP-series of mounts can also be rotated for left or right handed shooters, and feature two separate side clamps. 0 MIL/0 MOA Height: 30 mm/1.18” Clearance: 8 mm/.314" (from the bottom of the tube to bridge of the mount body) Length: 108 mm/4.25” Weight: 147 g/5.2 oz 10-degree wedge included Note: Will not fit the SAKO S20 or rifles with 2-piece rails

categories:GunsSporting Goods

9149 impressions

411 views

Brand new New Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts. The SCP-3000 is designed for use on Picatinny rails and features one classic ring and one interface ring, which can be rotated as to position the interface/accessory in either the 12-o'clock or 3-o'clock position. The SCP-series of mounts can also be rotated for left or right handed shooters, and feature two separate side clamps. 0 MIL/0 MOA Height: 24.5 mm/1” Clearance: 3.4 mm/.133" (from the bottom of the tube to bridge of the mount body) Length: 108 mm/4.25” Weight: 134 g/4.7 oz 10-degree wedge included Note: Will not fit the SAKO S20 or rifles with 2-piece rails

categories:GunsSporting Goods

8624 impressions

338 views

Brand new Slant Compensator for Type 81 LMG. Small, compact and lightweight option to reduce muzzle flip, specifically manufactured for Type 81 LMG. When firing offhand, the rifle will recoil up and away from support hand, therefore the idea for the slant compensator was born to counteract this diagonal movement. This compensator features 3 positions; off-hand right hand shooting, bench/bi-pod shooting and off-hand left hand shooting. Manufactured in USA, Black Oxide Finish. Be Sure to select correct threading for rifle being fitted to. M16 Thread for T81 SR and LMG, serial numbers <20202001 & all 2021 prefix

categories:GunsSporting Goods

7082 impressions

563 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:GunsSporting Goods

2465 impressions

357 views

Brand new Sealed in original package Description: 3 MOA Red-Dot with Adjustable Brightness MOTAC: Motion-Activated Illumination 1x Magnification/30mm Clear Aperture Fully Multi-Coated / Aspheric Lens 100 MOA Windage & Elevation / 1 MOA IPC CNC-Machined Magnesium Housing TruHold Lockless Zeroing System Waterproof, IPX7-Rated Picatinny & KeyMod Mounts Made in the USA Sig Sauer engineered the ROMEO1 1×30 Open Reflex Sight to enhance your firearm’s aiming capabilities. Its 3-MOA holographic illuminated reticle offers a brilliant red dot with adjustable brightness and Motion-Activated Illumination System (MOTAC). You will see your targets with clarity thanks to a specially-designed, aspherical lens that generates flat and distortion-free images. To enhance transmission of light and to eliminate glare, the lens is also treated with high-performance full multi-coatings. To account for wind and ballistics, the windage and elevation adjusters offer 100 MOA ranges with 1 MOA increments. Designed to endure the toughest battlefield conditions, this sight is packaged into a compact, durable, lightweight, and waterproof housing. To increase durability, the housing was CNC-machined from a single piece of magnesium. Another highlight of the construction is a TruHold twin-spring adjustment system. It is designed and endurance-tested to withstand handgun recoil, deliver lock-less zeroing performance, and to return to zero with impeccable repeatability. Reticle: Red-Dot reticle: 3 MOA 1 MOA impact point correction 100 MOA windage and elevation adjustment range MOTAC: Motion-Activated Illumination Optical Performance: Magnification: 1x Molded glass aspheric lens High-performance coatings Unlimited eye relief Mounting Compatibility: Picatinny rails KeyMod panels Construction: CNC-machined magnesium body TruHold twin adjustment springs ensure a lock-less zeroing and repeatability Waterproof and fogproof Shock-resistant $520 shipped Not interested in trade Thanks

categories:Guns

15301 impressions

1536 views

Brand new The Magpul Bipod for M-LOK offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”. An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Guns

3948 impressions

443 views

Brand new The MBUS Rear Sight is adjustable for windage and fits 1913 Picatinny-railed weapons, specifically the AR15/M16 platform. Spring-loaded, folding back-up sight Same plane dual flip apertures Lightweight reinforced polymer construction All mounting hardware included Please note that MBUS sights are optimized for 5.56mm and 7.62mm NATO weapons. 9mm/45 and other pistol caliber weapons may not be fully compatible due to bullet drop at extended range.

categories:Guns

4470 impressions

341 views

Brand new The MBUS Rear Sight is a folding, spring-loaded flip-up sight. Constructed from impact resistant polymer, the MBUS sight is both lightweight and durable. It is compatible with all Picatinny rails, and, having been specifically tailored with the AR platform in mind, has the same height-over-bore as standard A2 iron sights. Two apertures are available for use, one large and one small, and both allow the sight to be folded in position. Can be adjusted for windage with a detent knob.

categories:Guns

2347 impressions

331 views

Brand new Designed for use with all M-LOK compatible hand guards and forends. The 11-slot M-LOK Polymer Rail Sections provide a cost effective method of attaching various 1913 Picatinny-Spec rail-mounted accessories such as lights, vertical grips, etc. Injection molded from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight. The M-LOK Polymer Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly to M-LOK slots on either aluminum or polymer hand guards and forends is included. 11 usable slots and a max overall length of 4.9". Mounts directly to M-LOK compatible systems. Multi-directional mounting Intermediate spacing option Lightweight reinforced polymer Cammed T-nuts Recoil / impact mitigation lugs Made in USA

categories:Guns

2485 impressions

334 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:GunsSporting Goods

2494 impressions

421 views

Brand new .22, .223, 5.56 rifle bore cleaning kit for sale. Includes .22 cal brass brush, .22 cal chamber brush, empty plastic oil bottle, patch holder, 4 rifle rods, double end nylon cleaning brush, storage pouch. Pouch size is 25cm x 10cm/ 9.8" x 3.9" Small, compact and lightweight to bring anywhere, perfect for field operations or at -home cleaning. Cash, pick up only. Please see my other ads.

categories:GunsSporting Goods

9117 impressions

695 views

Like new very few rounds through the gun. Receiver - Steel ultra-low profile receiver with MonoLock Hinge, engraved with tough silver nitride finish Barrel 32” - 60/40 POI with a lightweight profile, ventilated side ribs and a floating top rib. Matte blued finish Action - Reverse Striker ignition system; using ultra-crisp and mechanical trigger design. Impact Ejectors for quick clearance of fired hulls, and a top-tang barrel selector/safety Stock - Charcoal gray composite stock with black rubber overmolding in grip areas. Adjustable comb for custom fit. A comfortable and extremely effective Inflex recoil pad. Vector Pro Lengthened Forcing Cones - For reduced shot deformation and more dense/consistent patterns. Choke System: Invector-Plus, includes 3x Midas Grade Chokes, Full Modified and Improved Cylinder Adjustable length of pull trigger 1/4" stock spacer to adjust the length of pull Ivory front and mid-bead sights Comes in original box…will ship on your dime. PAL confirmation required.

categories:Guns

8445 impressions

777 views

I am looking for a Browning BLR lightweight lever action rifle with a curved grip in a 223 caliber. ID # 034009108. I am willing to pay a finders fee to anyone who knows of one for sale. Contact...Ken Cameron at 780-903-8102 or email me at kencam2@telus.net Cheers

categories:GunsSporting Goods

8781 impressions

407 views

Brand new in the box This is a great lightweight shotgun for cabin boats, ATVs, and hunting. Also nice to have it as a backup gun in the bush. New and improved, comes with 3 chocks and rifle sight. NON-RESTRICTED Caliber: 3"/ 76 mm GAUGE: 12 GA BARREL LENGTH: 13"/ 33 mm STOCK: SYNTHETIC STOCK TYPE: HAMMER OUTSIDE OVERALL LENGTH: Folded 51/ Full Length 74 cm WEIGHT : 2.2 kg Set of chokes and key included

categories:Guns

11485 impressions

1260 views

Color: Black Type: Lightweight, Target, Budget Friendly Weight: 26OZ Fitment: Ruger 10/22 **WILL NOT FIT MODELS WITH BULL BARELL WITHOUT MODIFICATION** Made in USA WE SHIP CANADA WIDE. YOU MUST BE 18+ TO PURCHASE. PLEASE EMAIL US TO INQUIRE EMAIL US WITH ANY QUESTIONS!

categories:GunsSporting Goods

8495 impressions

946 views