Brand new The Magpul M-LOK AFG (Angled Fore Grip) is the result of research and refinements done to the original AFG and AFG-2. By integrating the direct-attach M-LOK mounting system with minimalist construction we were able to produce a high strength grip that only weighs 1.2 ounces, including hardware. Allowing for a wider range of mounting location options, the M-LOK AFG is ¾" shorter than the AFG-2 while maintaining a similar gripping surface area. Even though the M-LOK AFG is more compact than its predecessors it continues to take into account natural body mechanics to provide a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control. By positioning the shooter's hand high on the centerline of the bore, unlike conventional vertical fore grips, the M-LOK AFG helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. Made in USA

categories:Sporting GoodsGuns

2275 impressions

393 views

Brand new The MVG is a light weight, inexpensive vertical foregrip that attaches directly to M-LOK compatible hand guards and forends with no additional Picatinny rails required. Made from the same high quality polymer as other Magpul products, the M-LOK MVG uses the new Magpul TSP texture for positive control in all environments.  With rounded contours and a shorter length, it has been optimized for use with the "thumb break method" of shooting and can also be used as a traditional vertical foregrip. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. Made in USA

categories:Guns

2598 impressions

382 views

Brand new The M-LOK QD Sling Mount provides an alternate attachment point for the Magpul MS4 Sling and other push-button QD slings. Machined from Mil-Spec anodized aluminum, the low-profile M-LOK QD Sling Mount features beveled edges to reduce snagging and has an anti-rotation design that prevents swivels from spinning. Mounts to all M-LOK compatible hand guards and forends Accepts any push-button QD swivel as well as the Magpul QDM Machined from Mil-Spec annodized aluminum for durability and light weight Beveled edges reduce snagging Anti-rotation design prevents swivels from spinning

categories:Guns

2628 impressions

455 views

Brand new The M-LOK Paraclip Sling Mount is a steel clip-in sling mount for M-LOK compatible systems. It is constructed of high-grade, precision cast steel and has an extremely durable Melonite finish. With a low-profile and snag-free design it fits a wide range of clips, including the Magpul Paraclip. For use with M-LOK compatible hand guards and forends Accepts clip-style sling attachments such as our own Paraclip Durable steel construction Case hardened and finished with Melonite™ for extreme resistance to wear and corrosion Length, Max: 1.8" Height, Max: 0.5" Weight, w/ Hardware: 1.0 oz.

categories:Guns

2372 impressions

397 views

Brand new Designed for use with all M-LOK compatible hand guards and forends. The 11-slot M-LOK Polymer Rail Sections provide a cost effective method of attaching various 1913 Picatinny-Spec rail-mounted accessories such as lights, vertical grips, etc. Injection molded from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight. The M-LOK Polymer Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly to M-LOK slots on either aluminum or polymer hand guards and forends is included. 11 usable slots and a max overall length of 4.9". Mounts directly to M-LOK compatible systems. Multi-directional mounting Intermediate spacing option Lightweight reinforced polymer Cammed T-nuts Recoil / impact mitigation lugs Made in USA

categories:Guns

2691 impressions

367 views

50 shots were fired. .22mag caliber. Fine engraving and walnut stock and and guard. GTA face to Face deal, cash only. Please text me if you have questions.

categories:Guns

3823 impressions

471 views

Brand new Designed for use with all M-LOK compatible Hand Guards and Forends M-LOK Aluminum Rail Sections allow the attachment of various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc. Machined from milspec-anodized aluminum, M-LOK Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. 9 Slots Max overall length of 4.1″.

categories:Guns

2062 impressions

345 views

looking for the type 97 lower hand guard from t97.ca if you have one name a price

categories:Sporting GoodsGuns

2631 impressions

382 views

Cross Man Vigilante Air Pistol, with extras. Fires both .177 calibre pellets and BBs. Also includes extra clips for pellets, piney red dot, Plano Gun Guard Case, and 19 CO2 cylinders.

categories:Sporting GoodsGuns

3783 impressions

491 views

Brand new The RVG is a basic, light weight, cost effective vertical fore grip designed to be compatible with all 1913 Picatinny rails. Constructed from reinforced polymer with aggressive texturing for positive grip and manipulation, it is as durable as it is functional. It is ergonomically designed for use as a traditional vertical grip, but has also been optimized for use with the "Thumb Break Method" of shooting as taught by Magpul Dynamics. Includes all mounting hardware plus a universal mounting rail for custom fitting to many factory plastic hand guards. Made in USA

categories:Guns

3694 impressions

504 views

PLEASE READ CAREFULLY: You must obtain a letter of exemption from the CFO of your province in order to buy a handgun in Canada as of October 21, 2022. - CZ 75 SP-01 SHADOW 'ORANGE' 9mm caliber - NEW in black polymer carry case - 4.5 inch /114.3 mm long match grade burnished barrel - `ORANGE` meaning: On this pistol; all parts are HAND-FITTED to extemely tight tolerances by a master-gunsmith at the CZ Custom factory at the time of production for outstanding accuracy compared to the standard CZ 75 SP-01 - 3x 10 round steel magazines - THIS PISTOL IS IN IT`S ORIGINAL FORMAT and has not been altered in any way! - Full steel frame and slide... - Spare parts; recoil springs and shock-buffers in pictures (are all included) from the factory - Oil bottle (with oil), cleaning brush and patch puller (included) - Instruction manual (paper) and instructional DVD (included) - Extended Ambidextrous Safety - Extended magazine release - Extended beavertail - Checkered front and back straps and trigger guard - Super smooth polished trigger in single and double action - Skeletonized hammer - Accessory rail under the barrel shroud - Novak-style fixed rear sights and red fiber optic front sights - Integrally flared magwell - Front and rear slide serrations - Stainless steel guide rod and spring with shock buffer - 'Orange' aluminum, agressively-checkered CZ grip panels - Weight 40.7 oz / 1153 g unloaded Note* Serial number has been blacked out in all photos

categories:Guns

33143 impressions

3602 views

have been focused on gun parts lately, helping people out on their trigger guards, pic rail, barrel band, grip etc. let me know what's broken on your firearm or parts gun and I'm sure we can have it fixed for ya.

categories:Sporting GoodsGuns

19331 impressions

2084 views

Brand new TACTICAL LIGHT WITH RED LASER DESIGNED FOR USE WITH GLOCK® 43X MOS, GLOCK® 48 MOS, GLOCK® 43X RAIL AND GLOCK® 48 RAIL SUBCOMPACT HANDGUNS An industry first, the ultra-compact TLR-6® weapon light with high power LED and integrated red aiming laser features tool-less battery replacement without removing the weapon or the need to re-sight the laser. The light provides 1 hour of regulated runtime when in dual light/laser mode. Designed to securely attach to the trigger guard and rail of the GLOCK® 43X MOS, GLOCK® 48 MOS, GLOCK® 43X Rail and GLOCK® 48 Rail subcompact handguns. Features C4® LED illuminator and a 640-660nm red laser 100 lumens; 2,000 candela; 89m beam distance Runs 1 hour (LED only or LED/laser combo); 11 hours (laser only) Designed to securely attach to the rail and trigger guard of the following standard and compact railed handguns: Springfield Armory® XD®, XD(M)®, and XD® MOD.2® Smith & Wesson® M&P® GLOCK® Parabolic reflector produces a balance of beam and peripheral illumination; optimized electronics provide regulated intensity; red laser provides long-range targeting Ambidextrous switching (push-button on both sides) to access three modes: Laser only; Laser/LED combo; LED illumination only All modes feature a 10 minute auto shut-off to conserve batteries Batteries can be replaced while light remains mounted on gun; no need to re-sight laser after battery change Uses two CR1/3N lithium batteries (included) Removable cover for easy attachment/removal Windage and elevation adjustment screw mounted in brass bushing for dependable zero retention of laser Durable, impact-resistant polymer construction; IPX4 water-resistant; 1m impact resistance tested Operating temperatures of -20°F to +120°F Serialized for positive identification Size varies by model Limited lifetime warranty Assembled in USA

categories:Guns

7372 impressions

761 views

01.Bushnell Forge 4.5-27x50mm Riflescope.Reticle: Deploy MIL (FFP).Ultrawide Band Coating and EXO Barrier.Multi-coated optics.Tube diameter: 30 mm.Waterproof IPX7.50 MOA windage and elevation adjustments.Parallax adjustment range: From 25 yd to infinity.-$1000.00 02.Bushnell Elite Tactical HDMR II 3.5-21x50,G3 Reticle,Matte Black,34mm Tube,4 inch Eye relief.Mint, as new condition.-$1800.00 (Made in Japan) 03.Bushnell Nitro Riflescope 3-18x56mm with Cross 4A Illuminated, A versatile scope for mid-range hunter, with a 4x magnification range and large 56mm objective,30 mm Tube.-$750.00 04.Bushnell Match Pro 6-24x50 FFP Riflescope, Illuminated Deploy MIL Etched Glass Reticle,Black,Matte,30mm tube.-SOLD Purpose-built for competition shooting - The Match Pro 6-24x50 riflescope has all the features you need to compete with confidence and bring home the win. 01.Bausch & Lomb Elite 3000 2.5-10X40 Gloss,Duplex Firefly reticle,1" tube,very good, with tiny ring marks.-$380.00 Japan 02.Bausch & Lomb 2.5-10X40 Matte,Duplex Firefly reticle,1" tube,very good with tiny ring marks.-$360.00 Japan 03.Bausch & Lomb Elite 4200 1.5-6x36mm with RAINGUARD,1" tube,Duplex reticle,Black Matte.Made in Japan.-$300.00 04.Bushnell Bone Collector Rain Guard HD Rifle scope 3-9x40mm 1" Tube,DOA 600 (Dead on Accurate) Reticle,Matte.-$240.00 Japan. 05.Bushnell Elite Tactical-Sold 06.Bushnell Elite-Sold 07.Bushnell Elite 4200 Rifle Scope 2.5-10X40mm Multi-X Reticle Matte.-$400.00 Japan (us new) 08.Bushnell Elite 3200 2-7x32 Waterproof & Fogproof Riflescope (8.5-2.4 Degree Angle of View) with Multi-X Reticle - Matte Black-$280.00 09.Bushnell AR93940 Optics 3-9x 40mm Riflescope Scope Drop Zone .223 BDC Reticle.-$280.00 China 10.Bushnell Trophy XLT Riflescope 4-12X40,DOA quick ballistic reticle, Matte.-$180.00 Korea 11.Bushnell Trophy Riflescope 3-9X40, Multi-X Reticle, Matte.-$140.00 Used. 12.Bushnell Elite 4200 Rifle Scope 2.5-10X40mm Multi-X Reticle,Silver,1 inch tube.-SOLD Japan (good with some ring marks). 13.Bushnell Legend 3-9x50mm, Wire CSHR Reticle Riflescope, 1 inch tube, Black, Matte.-$250.00 14.Bushnell Banner Dusk and Dawn 3-9x 40mm, Multi-X Reticle Riflescope with 3.3-Inch Eye Relief, Black,Matte,1" tube,very good with tiny ring marks.-$120.00 15.Bushnell Prime 4-12x40mm Riflescope, 1" Tube, Black, Matte, Multi-X Reticle -$220.00 16.Bushnell Trophy Riflescope 3-9X40, Multi-X Reticle, Matte.-$140.00 Used.Philippines 01.Bushnell Rimfire 3-9x40 Illuminated. Black, Matte,1 inch tube. Scope features an illuminated bullet drop compensation reticle that gets a 40-grain 22LR round out to 125 yards in 25-yard increments with a 50-yard zero. Excellent plus condition.-SOLD 02.Bushnell Sporsman 3-9x32,Gloss,Multi-X Reticle-$60.00 China 03.Bushnell Sporsman 3-9x40,Gloss,Multi-X Reticle-$70.00 China 04.Bushnell 3-9x40 EG Illuminated Viewfinder Optical Sight Reticle scope-$80.00 China 05.Bushnell Banner 3.5-10x36mm Wide angle,Adjustable objective,Multi-X reticle,Matte-$90.00 Korea 06.Bushnell High Contrast 3-9X40 1 inch, Duplex,Matte.-$80.00 Philippines 07.Bushnell .22 Rimfire 4X32 Riflescope,Black Matte, Multi-X Reticle-$60.00 China 08.Bushnell Banner 4x40mm Rimfire Scope.Multi-X reticle,Gloss-$90.00 Japan Some scopes could be have some scrathes and marks from being mounted.Please send message to: medal1958@gmail.com

categories:Sporting GoodsGuns

38658 impressions

2805 views

- 3 Gauge Gun w/Shotgun Gauge Reducers (x2) 12g-20g and 12g-410g $260 and (I will pay 50% of shipping costs aprox $25) - 12g Model CIL 401, Used Cond, One Repair, Solid Old Gun, 2 3/4 Inch Shells, - 30 Inch Barrels, 46 Inch Total Length, - Barrel are Nice and Shiny Inside - Plastic Push Button Trigger Guard Tang - CBC Metal Butt Plate - Very Solid Shotgun, Opens,Closes Very Easily - Made in Brazil.. Has Strong Shell Ejector - Text Only.. 780 915 3274 No Emails.. - Check Out My Other Adds - PAL/FAC a Must. - SGR's simply drop into the chamber as a 12g shell would then the 20g or 410g into the SGR.. So Handy!! Go shoot with the kids and or the ladies... and you just need the one Gun... less to store, maintain and pack.. Great option for a Cheap Under the Seat, Quad Box or stored in the Boat for a Bear Banger, Grouse Getter, or the Rabbit Hopper Stopper for Stew.. or just blasting thru cheap or Free Old Ammo..

categories:Sporting GoodsGuns

52658 impressions

5069 views

Weatherby Athena D'Italia Grade IV 12 Gauge O/U Shotgun.28 inch barrels, 3 inch chamber, ejectors, single select trigger, four-lock boxlock action with chrome plated side plates with gold game bird scenes, SST (tang operated). LOP professionally altered to 15 inch. Come with original Weatherby case and 3-Weatheby screw in choke tubes. Trigger guard features Weatherby flying "W" Mfg. by Fausti .Very good condition. Please call me or text,before you send EMT!!!! Please send message,payment to: medal1958@gmail.com Shipping on buyers dime.

categories:Sporting GoodsGuns

53179 impressions

5066 views

Brand new Polymer three-piece design with an interchangeable finger shelf that allows for a flat "A1-style" surface or an "A2-style" finger nub Mounts to MIL-STD-1913 Picatinny and NATO STANAG 4694 rails (min. of ~3" recommended) All mounting hardware included The AFG-2 is a slim line design that is shorter in overall length and width compared to the original AFG. Smaller size allows for mounting on a wider variety of railed hand guards and better compatibility with rail covers and accessory mounts. Compatible with most any M1913 Picatinny-railed hand guard, the Magpul AFG-2 (Angled Fore Grip) takes into account natural body mechanics and provides a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control. By positioning the shooter's hand high on the centerline of the bore, unlike conventional vertical fore grips, the AFG-2 helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots. Made in USA

categories:Guns

4102 impressions

673 views