Brand new Compatible with short action AICS (Accuracy International Chassis Systems) pattern bottom metal and cartridges built on a 0.470" case head such as 7.62x51/.308 Winchester, 7mm-08 Remington, 6.5mm Creedmoor, .260 Remington, .243 Winchester, and others Accepts a cartridge overall length of up to 2.86" Next-generation impact and crush resistant polymer construction Self-lubricating follower for increased reliability Long life stainless steel spring Paint pen dot matrix panels on the bottom of the body to allow for identification marking Flared floorplate aids magazine handling and is easy to disassemble for maintenance NOTE:  Not compatible with smaller base diameter cartridges such as .220 Swift, .223 Remington, .300 AAC Blackout, etc. or larger short action magnums. In addition, due to the wide variety and potential combinations of aftermarket receivers, stocks, chassis, and bottom metal that accept AICS pattern mags, minor fitting may be required. Not compatible with Accuracy International AE rifles or semi-auto platforms utilizing SR25/M110 pattern magazines.

categories:GunsSporting Goods

27970 impressions

618 views

The Model 110 Hog Hunter. adjustable AccuTrigger™ provides a light, crisp pull. The rifle is built on Savage’s time-tested 110 platform but with a modern design and improved ergonomics. A rugged synthetic stock holds the 20-inch, medium contour, carbon steel barrel, which features iron sights and is threaded. Low round count and has a rail. Great shooting rifle. 403-805-38 six seven

categories:GunsSporting Goods

3189 impressions

506 views

Magpul Glock PMAG 10 Rounds 9 mm Magazine GL9-G17 MAG801-BLK Condition : new Tax rates shipping into your province NB, PEI, NS, NL, all pay 15% Ont, pays 13% Everybody else pays 5% GST only contact john at Doctor Deals 506-855-5377 e-transfer only Shipping through Canada Post, 18+ Signature PRODUCT DETAILS The Magpul PMAG 10 GL9 – Glock 17 was designed for flawless reliability and durability over thousands of rounds. It provides the same quality and performance of the proven Magpul PMAG series of Glock magazines while also providing a viable product solution to those in locations and situations where a 10-round capacity restriction is required or desired. It utilizes the same double stack feed geometry as the standard capacity PMAG GL9 to ensure feeding and to avoid known reliability issues seen in many competitor products on the market. Includes a high visibility controlled-tilt follower, a stainless steel spring, an easily removable floorplate for cleaning, paint pen dot matrix for mag marking, ridged floorplate edges for better grip, and 10-round indicator windows. The magazine drops free when loaded or unloaded. All with the same boring reliability you expect from an OEM magazine. The PMAG 10 GL9 – Glock 17 is compatible with all full-size 9mm Glock handguns and compact and sub-compact variants with some protrusion below the grip. Made in the USA.

categories:GunsSporting Goods

7687 impressions

754 views

Remington 870, TAC-14, Shockwave, 20 Gauge, pump action shotgun, R81145 Condition : new Tax rates shipping into your province NB, PEI, NS, NL, all pay 15% Ont, pays 13% Everybody else pays 5% GST only contact john at Doctor Deals 506-855-5377 e-transfer only Shipping through Canada Post, 18+ Signature Warranty available Small in size but huge on home defense capability, the Model 870 TAC-14 delivers devastating, threat-stopping power to protect your home and family. Featuring legendary Model 870 reliability, a Raptor pistol grip and Magpul M-Lock forend, its powerful personal protection at its absolute shortest– and finest. Specifications Caliber : 20 Gauge Model : R81145 Mag Capacity : 4 Weight : 5.6 lbs Front sight : Bead Barrel Length : 14″ Barrel Type : Cylinder Choke

categories:GunsSporting Goods

7644 impressions

642 views

Custom mod 590 with magpul stock and pum action, and 6 shell quick load attached.

categories:GunsSporting Goods

2607 impressions

713 views

Savage 110 Magpul Hunter. I bought it new a while back and put one box through it to zero and test. Exceptionally accurate rifle with a nice adjustable Accu-trigger. 18" barrel is factory threaded and cerakoated tungsten grey. Comes with the factory Magpul 5 round AICS magazine and can also take 10 rounders. Excellent shape, just looking to go another direction for my bolt gun setup. I do have the original box, manual, trigger adjustment tool and two extra stock spacers. Comes with a Magpul MAG333 QD cup installed in the stock. Note: Glass, rings and 10 round mag in first picture are not included or for sale. Thanks $1200 Willing to ship at buyers expense. Would consider trade or partial trade for .308 / 7.62x51 brass cased factory ammo (No handloads / no steel cased).

categories:GunsSporting Goods

7376 impressions

915 views

Brand new The M-LOK Extended Cantilever Scout Mount provides forward light positioning to minimize shadowing effects The extended cantilever design is low profile and optimized for Magpul MOE SL, Zhukov and MOE M-LOK Shotgun forends as well as compatible aluminum M-LOK handguards It fits Surefire, Scout Light and Streamlight and ProTac rail lights It directly mounts to M-LOK compatible systems and includes cammed t-nuts, recoil/impact mitigation lugs and has backwards MOE compatibility with optional adapters *Note: NOT compatible with SureFire DS00 Dual Activation Switch or M600DF Scout Light The Scout Mount will not properly fit Bushmaster ACR Hand Guards *The MOE Scout Mount is optimized for rifles with a factory A2 front sight base Rifles with a railed gas block and folding front sight may have clearance issues depending on the size/shape of the gas block, sight, and installed light Made in USA

categories:GunsSporting Goods

3096 impressions

368 views

Brand new The Magpul Barricade Stop is a rugged hand stop that allows the shooter to brace their firearm off barricades or field expedient shooting rests to create a stable platform for more accurate shots. The Barricade Stop is constructed of a polymer body that’s fit with a hardened, QPQ-treated steel plate insert. The steel plate is heavily textured for aggressive contact with your shooting rest. It’s also slightly curved for optimized contact on uneven surfaces, giving you the ability to pivot your firearm while maintaining contact and control. Compatible with octagonal M-LOK Handguards. Made in USA

categories:GunsSporting Goods

1446 impressions

333 views

Brand new While both the UBR® and STR® come with TYPE 1 push-button QD swivel sockets pre-installed on the left side of the stock, this Sling Mount Kit– TYPE 2 can be installed on the opposite side to add additional push-button QD Sling Swivels or our own Magpul® QDM. Additionally, for running ambidextrous sling swivels on the SGA®, MOE® Rifle, MOE® Fixed Carbine, MOE® AK, Zhukov-S, Hunter 700, and Hunter X-22 Stocks, this TYPE 2 Kit must be utilized in conjunction with the optional TYPE 1 Kit. Heavy-duty black phosphatized steel construction easily installs with the UBR or STR's original hardware, or with the hardware included with the TYPE 1 Kit. Swivels not included. Made in USA

categories:GunsSporting Goods

2070 impressions

348 views

Brand new The M-LOK QD Sling Mount provides an alternate attachment point for the Magpul MS4 Sling and other push-button QD slings. Machined from Mil-Spec anodized aluminum, the low-profile M-LOK QD Sling Mount features beveled edges to reduce snagging and has an anti-rotation design that prevents swivels from spinning. Mounts to all M-LOK compatible hand guards and forends Accepts any push-button QD swivel as well as the Magpul QDM Machined from Mil-Spec annodized aluminum for durability and light weight Beveled edges reduce snagging Anti-rotation design prevents swivels from spinning

categories:Guns

2426 impressions

413 views

Brand new Designed for use with all M-LOK compatible Hand Guards and Forends M-LOK Aluminum Rail Sections allow the attachment of various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc. Machined from milspec-anodized aluminum, M-LOK Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. 5 Slots Max overall length of 2.5″.

categories:GunsSporting Goods

1484 impressions

283 views

Brand new The SGA Stock is an ambidextrous, user-configurable buttstock designed to add much-needed adjustability to the tried and true Remington 870 12ga shotgun. Featuring a spacer system for length of pull adjustment, improved grip ergonomics, recoil-reducing butt-pad, optional cheek risers for use with optics/raised sights, and other accessories, the SGA 870 brings Magpul design and engineering to another classic American firearm. Made in USA

categories:GunsSporting Goods

5105 impressions

418 views

Brand new The Magpul MOE M-LOK Forend is a drop-in replacement for the Remington 870 series shotguns, adding modularity, comfort, and customizability to the 870 platform. It features an extended length and front/rear hand stops for improved firearm control and manipulation and does not overlap the receiver for side saddle compatibility. The MOE M-LOK Forend is compatible with M-LOK rails, accessories, and mounts. The MOE M-LOK Forend is not compatible with the Remington 870 Super Mag.

categories:GunsSporting Goods

4512 impressions

374 views

Brand new The Magpul MOE M-LOK Forend is a drop-in replacement for the Mossberg 590/590A1 series shotguns, adding modularity, comfort, and customizability to the mossberg platform. It features an extended length and front/rear hand stops for improved firearm control and manipulation and does not overlap the receiver for side saddle compatibility. The MOE M-LOK Forend is compatible with M-LOK rails, accessories, and mounts. Not compatible with the optional Mossberg heatshield. Removal is required before use. Not compatible with the 590M shotgun.

categories:GunsSporting Goods

4975 impressions

404 views

Brand new The MOE Grip (Magpul Original Equipment) is a drop-in upgrade for the standard AR15 / M4 pistol grip. The ergonomic, hand-filling design combines anti-slip texturing with storage core capability. With a similar shape to a ‘medium’ sized MIAD, the one-piece reinforced polymer construction provides simplicity and a reduced cost while still maintaining the durability needed to withstand operational environments. The MOE Grip accepts optional Storage Cores for gear stowage and includes a basic grip cap. All mounting hardware included. Positive Anti-Slip Texture Beavertail Backstrap For Enhanced Ergonomics Storage Core Capability Hard Polymer Bottom Made in USA

categories:GunsSporting Goods

2015 impressions

318 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:GunsSporting Goods

2465 impressions

357 views

Brand new The M-LOK Paraclip Sling Mount is a steel clip-in sling mount for M-LOK compatible systems. It is constructed of high-grade, precision cast steel and has an extremely durable Melonite finish. With a low-profile and snag-free design it fits a wide range of clips, including the Magpul Paraclip. For use with M-LOK compatible hand guards and forends Accepts clip-style sling attachments such as our own Paraclip Durable steel construction Case hardened and finished with Melonite™ for extreme resistance to wear and corrosion Length, Max: 1.8" Height, Max: 0.5" Weight, w/ Hardware: 1.0 oz.

categories:Guns

2157 impressions

364 views

Brand new The RSA QD provides a customized attachment point for all push-button QD slings. Made from corrosion resistant steel, it mounts on 1913 Picatinny rails and places the attachment point at an angle optimized for comfortable two-point sling use while maintaining easy push-button access.

categories:Guns

2309 impressions

352 views

Brand new The next evolution in our MBUS (Magpul Back-Up Sight) line The MBUS 3 incorporates the best features, strengths and value of our original MBUS and MBUS Pro Sights in a feature-packed back-up sight system.

categories:Guns

2241 impressions

331 views

Brand new The next evolution in our MBUS (Magpul Back-Up Sight) line The MBUS 3 incorporates the best features, strengths and value of our original MBUS and MBUS Pro Sights in a feature-packed back-up sight system.

categories:Guns

2419 impressions

406 views

Brand new The Magpul Bipod for M-LOK offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”. An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Guns

3948 impressions

443 views