Drop in price. Selling a Winchester Model 2200 12 gauge chambered for 3 inch shells. It is in excellent condition and had little use, hasn't been fired for over 25 years. There has been no steel shot used in it and comes with several boxes of shells. Pick up only.

categories:GunsSporting Goods

2687 impressions

425 views

Ad Title: W. Richards – Double Barrel Hammer Shotgun – 12GA Make : W. Richards, Belgium Model: Laminated Steel (inscribed over the barrel) Serial No: 1901 Type of action: Double Barrel Break Action with hammers Barrel length: 28 inches Caliber: 12GA Note: This shotgun does not eject cartridges. It only extracts. Condition: Very good overall condition for such an old shotgun. Damascus barrels. There is a low level of corrosion in the barrel. Original hammers. Light scratches on wood. The forend had a small crack which was fixed with a pin. In addition there is a small piece of wood missing at the forend. The action works properly and is very strong while there is a little loose between the barrels and the action. The damascus design is still very good and visible on the barrels. This is a fully original shotgun without parts replaced. Permit: PAL required Price: $385.00 Cdn Ref: 23A114 Shipping: $30 in Canada (Barrel and action separated from the stock) Basic Insurance: $100 included with all purchases Full insurance: Add 2% of the value of your purchase to get full coverage Payment: By E Transfer

categories:GunsSporting Goods

26866 impressions

2915 views

30-06 tikka t3 with stainless steel barrel n laminated greywood stock has set of game reaper one piece scope mount shot twice selling for house down payment 1400$ or closest offer

categories:GunsSporting Goods

6562 impressions

715 views

Chiappa Double Badger 22wmr/410ga Over/Under Break Open 500.111 Condition : new Tax rates shipping into your province NB, PEI, NS, NL, all pay 15% Ont, pays 13% Everybody else pays 5% GST only contact john at Doctor Deals 506-855-5377 e-transfer only Shipping through Canada Post, 18+ Signature Warranty available This shotgun/rimfire combination gun is a great choice for hunting, survival or fun recreational shooting. New for 2016 the Double Badger is available in 20ga/.22lr, to go along with the 410ga/.22lr and 410ga/.22WMR. The Double Badger has the look, feel and function of an over and under shotgun with an attractive wood buttstock and forend but with the versatility of a rimfire cartridge. Each barrel is selectively fired by its own trigger and controlled by a top tang safety that is easy to use quickly and reliably. The Double Badger comes with a Williams Fiber Optic ghost ring and front sight as well as a 3/8” dovetail rail for mounting optics. Designed for portability, pushing the trigger guard down allows the Double Badger to fold in half for a total overall length of 21.20″ making storage and transport easy. Specification SKU: 500.111 Menu Type: Rifles Caliber: .410 Bore / 22 MAG Action: Break Open (Folding) Barrel Length: 19” (483 mm) Capacity: 1+1 Rounds Feed In: Manual Trigger System: Double Triggers Stock: Chk. Beech Forend: Chk. Beech Lever Type: Opening Lever Rear Sight: Williams Green FO w/ Ghost Ring, Adj. Windage & Elevation Safety: Manual Chokes: Fixed Full Total Length: 34.3” (871 mm) Material: Steel Net Weight: 2.8 Finishing: Blued Extraction: Extractor Ean/Upc: 8053670711020

categories:GunsSporting Goods

14609 impressions

815 views

JTS E60.1 Over Under 12 gauge walnut shotgun, JE60.1 Condition : new Tax rates shipping into your province NB, PEI, NS, NL, all pay 15% Ont, pays 13% Everybody else pays 5% GST only contact john at Doctor Deals 506-855-5377 e-transfer only Shipping through Canada Post, 18+ Signature Warranty available 12 Gauge With Ejectors Over / Under Chrome Lined Barrel Steel Receiver Walnut Stock Barrel Length: 28” Chamber : 3″ 5 Chokes Included (Im, M, Ic, C, F) Sling studs : none

categories:Guns

11218 impressions

1319 views

Charles Daly 601 12 Gauge Tactical Semi-automatic Black Synthetic Shotgun 930.229 Reduced from 409.99$ to 339.99$ Condition : new Tax rates shipping into your province NB, PEI, NS, NL, all pay 15% Ont, pays 13% Everybody else pays 5% GST only contact john at Doctor Deals 506-855-5377 e-transfer only Shipping through Canada Post, 18+ Signature Warranty available Feature & Specifications SKU: 930.229 UPC: 8053800941372 Type of Gun: Shotgun Caliber: 12GA-3″ Action: Semi-Auto Barrel Length: 18.5″ (470 mm) Chokes: Beretta/Benelli® Mobil Choke Thread MC-3B (IC,M,B) Capacity: 4+1 Feed In: Magazine Tube Bolt: Gas Operated Trigger System: Single Stock: Checkered Synthetic Forend: Checkered Synthetic Front Sight: Hooded Fixed Rear Sight: Ghost Ring w/ Rail Safety: Manual Weight: 6.8 lbs Length: 40″ Material: Aluminum, Steel Barrel Finish: Black Anodized w/ Blued Barrel Extraction: Auto Ejection

categories:GunsSporting Goods

13435 impressions

1197 views

Little Badger 22 lr Single Shot OD Green Rifle with Scope 500.232 Condition : new Tax rates shipping into your province NB, PEI, NS, NL, all pay 15% Ont, pays 13% Everybody else pays 5% GST only contact john at Doctor Deals 506-855-5377 e-transfer only Shipping through Canada Post, 18+ Signature Warranty available Shipped disassembled, box cut, added packaging to protect it. This eliminates the oversize shipping fee of 20$ year round or 30$ for the Xmas rush, also reducing the risk of damage and the shipping weight. LITTLE BADGER RIFLE (BLACK/OD GREEN) 22LR/16.5″BBL W/SCOPE The ultimate packable survival gun. Scope and hammer extension included. Does not include a backpack. Specifications Type of Gun: Rifle Caliber: 22 Long Rifle Action: Break Open Barrel Length: 16.5″ Capacity: 1 Feed In: Manual Trigger System: Single Stock: Wire Steel Forend: Quad Picatinny Safety: Manual Weight: 3.6 lbs Length: 31″ Material: Alloy Frame / Steel Barrel Finish: Blued Extraction: Manual

categories:GunsSporting Goods

5992 impressions

531 views

.300 Ultra mag in a Montana Riflemen Action for Sale. It has a 3 was safety on this Stainless Steel bolt action with a 3.5lb trigger pull. The stock is a synthetic olive green Macmillan. KS Arms did the bedding and built a 25” Stainless Steel #4 barrel with a detachable muzzle break. The rifling is done in a Gain Twist. Comes with Stainless Steel mounts and 30mm rings. This gun hasn’t shot 100 rounds. One owner. 2 boxes of ammunition in 200 grain. Awesome unit, I’m getting old, shooting smaller calibers. Haha

categories:GunsSporting Goods

2095 impressions

357 views

CVA Scout VE SS-Black, single shot, break open 44 Mag Rifle, CR4431S Condition : new Tax rates shipping into your province NB, PEI, NS, NL, all pay 15% Ont, pays 13% Everybody else pays 5% GST only contact john at Doctor Deals 506-855-5377 e-transfer only Shipping through Canada Post, 18+ Signature For the hunter who wants a high-quality single shot rifle, the SCOUT is the ideal choice. Its sleek, lightweight, and easy to operate design sets a new standard for affordable single shot hunting rifles. Every stock is lightweight, 100% ambidextrous, and features CVA’s CrushZone® Recoil pad – a real plus for heavier calibers. The SCOUT .44 Magnum comes with a 22” fluted stainless steel barrel. Featuring quick-take-down, tools-free disassembly, it’s also a great stowaway emergency/survival gun for the camp, boat, or truck. Plus, all SCOUT rifles feature a genuine DuraSight® scope rail Features & Specifications Model : Scout VE SS-Black Caliber : 44 Magnum Capacity : 1 Barrel Length : 22″ Barrel Type : fluted stainless steel Stock : Black Polymer Butt Pad : Rubber Action : Break open Sight : DuraSight scope rail only

categories:GunsSporting Goods

9342 impressions

887 views

430FPS, Fully Automatic, Semi & Single Shot. Comes with a full bottle of Black Steel BB’s, Scope & Tripod

categories:GunsSporting Goods

1582 impressions

563 views

Parker bros. Sxs 12 ga shotgun. Above average condition. Built 1914 VHE model with auto ejectors,Vulcan steel barrels. Beautiful burreled stock and original blueing. Locks up like a vault. Very tight gun. I've owned this gun for 50 years. Great addition to a deserving collector. Cash or etransfers only. No trades

categories:GunsSporting Goods

4080 impressions

664 views

The Winchester 2200 is a pump-action 12-gauge shotgun, manufactured in Canada by Cooey under license from Winchester. It is nearly identical to the Winchester 1200, with a few minor differences in materials and markings. Key Features: • Gauge: 12-gauge • Action: Pump-action • Capacity: Typically 4+1 rounds • Barrel Length: Varies (often 28” or 30”, depending on model) • Chamber: 2 ¾” shells • Choke: Fixed choke (Modified or Full, depending on barrel) • Stock & Forearm: Wood stock and pump forearm • Receiver: Blued steel • Production: Manufactured in Canada in the 1960s–1970s

categories:GunsSporting Goods

9773 impressions

1093 views

Wood stock black finish 31/2 inch semi auto comes with red dot site very nice gun maybe 25 rounds threw it almost brand new comes with 500 round of 3" steel shot 2000$ 4036357584

categories:GunsSporting Goods

3150 impressions

424 views

Brand new The Magpul Barricade Stop is a rugged hand stop that allows the shooter to brace their firearm off barricades or field expedient shooting rests to create a stable platform for more accurate shots. The Barricade Stop is constructed of a polymer body that’s fit with a hardened, QPQ-treated steel plate insert. The steel plate is heavily textured for aggressive contact with your shooting rest. It’s also slightly curved for optimized contact on uneven surfaces, giving you the ability to pivot your firearm while maintaining contact and control. Compatible with octagonal M-LOK Handguards. Made in USA

categories:GunsSporting Goods

1446 impressions

332 views

Woods or fields. Fur or feathers. Federal Game Loads have you covered. They are carefully crafted and packed with features that provide reliable, effective performance on a variety of upland game. High-quality round shot is formulated for optimum hardness, improving pattern efficiency Brass-plated steel head and one-piece wad maximize payloads Select, high-quality propellant and non-corrosive primer deliver efficient, reliable ignition Willing to ship on buyers dime

categories:Guns

4719 impressions

504 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:GunsSporting Goods

2465 impressions

357 views

Brand new SureFire SFMB muzzle brake suppressor adapters greatly reduce both recoil impulse and muzzle rise so that your weapon tracks straight back, keeping you on target for faster shot-to-shot recovery. The proprietary Impulse Diffusion design minimizes side blast and rear-directed concussion effects. Precision machined from U.S. mill-certified heat-treated stainless steel bar stock and DLC-coated for extreme durability, they are available for a variety of weapon calibers and muzzle thread specs, and every SFMB serves as a rock-solid mounting adapter for SureFire’s combat-proven SOCOM Series Fast-Attach® suppressors. The SFMB design incorporates multiple bearing surfaces to ensure superior suppressor alignment. Blind pilot holes at the 3 o’ clock and 9 o’clock positions enable fine-tuning of recoil characteristics for individual shooting styles or ammunition characteristics. Blind pilot holes at the 6 o’clock position enable indexing the adapter at bottom dead center. All that’s required is a basic hand drill and appropriate drill bits. Offset porting delivers greatly reduced recoil impulse and muzzle rise, so the weapon tracks straight back to keep you on target for faster shot-to-shot recovery Multiple bearing surfaces for superior suppressor alignment Precision machined from U.S. mill-certified heat-treated stainless steel bar stock High-precision single-point cut barrel threads for optimum thread interface Inspected for all critical dimensions including concentricity and alignment Pilot holes for tuning of muzzle brake and to pin-and-weld to rifle barrel as needed DLC coating provides maximum protection against harsh environmental conditions and facilitates cleaning after extreme use Serves as rock-solid mounting adapter for SureFire SOCOM Series sound suppressors Labyrinth seals prevent carbon buildup on suppressor lock ring indexing system Model Number: SFMB-762-M18x1.5 Caliber: .308(7.62) Thread Pitch: M18X1.5

categories:GunsSporting Goods

7280 impressions

489 views

Brand new Description: This optic goes on the 320 M17 – 320 LDC – 320 LDC PRO – 320X5 and 320X5 Legion Designed for fast, responsive target acquisition and accuracy, the ROMEO1PRO miniature open-reflex red dot sight was engineered to withstand the punishment of harsh environments. With an upgraded emitter for superior brightness and outstanding battery life, the ROMEO1PRO is capable of mounting to any SIG SAUER pistol or any other pistol machined to accept the ROMEO2 / PRO reflex sight interface and mounting hole spacing using the included M4 mounting screws. – Molded glass aspheric lens with high performance coatings for superior light transmittance and zero distortion – 3 MOA red dot with multiple brightness settings for rapid target engagement under a full range of lighting conditions – TruHold Lockless Zeroing System that utilizes twin adjustment springs designed to endure handgun recoil and return to zero shot after shot – New point-source emitter provides exceptional brightness with 12 settings (10 Daytime/2 NV), and 20,000+ hours of runtime – MOTAC (Motion Activated Illumination System) that powers up when it senses motion and powers down when it does not – Aircraft grade CNC Aluminum housing ensures a lifetime of reliable service – Dependable waterproof (IPX-7 rated for complete water immersion up to 1 meter) and fogproof performance – Ruggedized protective steel shroud included for extreme durability – SIG SAUER Electro-Optics Infinite Guarantee and SIG SAUER Features: Color: Black Weather Resistance: Yes Objective Lens Diameter: 30mm Magnification: 1x Lens Material: Glass Fabric/Material: Aircraft Grade Aluminum Attachment/Mount Type: Picatinny Reticle: 3 MOA Dot Gun Model: Sig Sauer Length: 1.8″ Height: 1.1″ Adjustment Type: MOA Battery Type: CR1632 Weight: 0.06 lb Included Accessories: Mounting Screws Brightness Settings: 12 Water Resistance Level: IPX-7 Illumination Color: Red Width: 1.2″ Battery Life: 20000 hours Objective Window Size: 28x18mm

categories:Guns

8743 impressions

866 views

Brand new The Magpul Bipod for M-LOK offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”. An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Guns

3947 impressions

443 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:GunsSporting Goods

2493 impressions

421 views

valid PAL required 8 boxes total.. each box complete with 25 shotshell 2 boxes 12 ga 3 inch 1 1/4 ounce BBB 6 boxes 12 ga 2 3/4 inch 1 ounce # 4 shot $ 40 per box $ 300 for all 8 boxes..... 200 shotshells

categories:Guns

3136 impressions

415 views