Nikon Monarch Rifle Scope. 2.5 - 10 x 42 BDC long range reticle. Excellent optics. Mint condition. $800 brand new. Complete with all manuals.

categories:Sporting GoodsGuns

2716 impressions

704 views

Blaser R8 Ultimate NEW, complete rifle with scopes set. Adjustable cheek comb and recoil absorption pad. Semi weight fluted barrel, 308 win IC control bolt housing Blaser 2.8-20x50 ic scope Blaser RD20 red dot Blaser Zeiss QD saddle mount Blaser sling Blaser Type C hard case Everything brand new, hard case used for storage. A very high quality rifle, that is very adjustable, extremely well balanced and very accurate. Complete set, that is good for use in the bush or long (for the caliber) range. All original boxes available. Price is firm + shipping. Not interested in trades, sorry.

categories:Sporting GoodsGuns

37138 impressions

1712 views

Brand new 5-20x50mm 30mm Tube Second Focal Plane Trijicon produces battle-proven aiming systems that deliver rapid target acquisition and increased hit potential under any lighting conditions. Their self-luminous aiming systems empower you to execute any shot with complete confidence in bright light, low light or no light at all. With a stunning magnification range, a 30mm tube, and an impressive objective, the AccuPoint 5-20x50 looks mighty serious while delivering the power needed to get on target across long distances. This fine optic is also graced with a very handy third turret that re-focuses the reticle to eliminate parallax error. Sighting during twilight conditions is enhanced considerably by the remarkable 50mm objective, while the dual tritium/fiber optic reticle illumination system provides a vibrant aiming point under any conditions. A mounting base and rings are used to attach a riflescope to a firearm. A comfortable sight picture is contingent upon the height of the rings. A comfortable cheek-weld is the result of properly positioning the scope over the receiver. Mounting the scope close to the receiver is preferable, yet scopes with larger objectives need higher rings so the front bell can clear the barrel. It should be noted that in many mounting applications, a professional gunsmith's skills will be needed for proper installation. 30mm Main-Tube 6061-T6 Aluminum main-tube is waterproof to 10' Mil-Spec Finish Type III hard anodized per MIL-A-8625 , Class 2 dull & non reflective Multi-Layer Coated Lenses Provide superior clarity, zero distortion, flare/glare reduction Side-Focus Parallax Correction Third turret on saddle actuates parallax correction for long-range accuracy Fiber Optics and Tritium Illumination Proprietary battery-free technology provides a vivid aiming point without the need for failure-prone batteries Dual-Illuminated Standard Crosshair w/Green Dot Reticle A series of dots upon the cross hairs gives the shooter the ability to judge bullet drop and the proper hold over for accurate long range shot placement. Trijicon's proprietary tritium/fiber-optic illumination technology places a brilliant green dot at the intersection of the stadia. This scope has the reticle positioned in the rear or second focal plane so it will not magnify when the scope is zoomed to high power. This leaves the sight picture unobstructed for a clear view at all times. Reticle: Standard Crosshair w/Green Dot Main-Tube Diameter: 30mm Linear Field of View: 5x: 19.1' @ 100 yd / 6.3 m @ 100 m 20x: 5.1' @ 100 yd / 1.7 m @ 100 mExit Pupil Diameter5x: 10mm 20x: 2.5mmEye Relief5x: 3.8" / 96.5mm 20x: 4.1" / 104 mm Impact Point Correction: 1/4 MOA Maximum Windage/Elevation Adjustment Windage: 34 MOA Elevation: 34 MOA Weatherproofing: Waterproof to 10.0' Length: 13.6"/345mm w/o sunshade Weight: 29.4 oz / 0.83 kg w/ sunshade Coming with: Weatherproof Logo Sticker 3.0" Sunshade Pair of Lens Caps Limited Lifetime Warranty (15 Year Warranty on Tritium)

categories:Sporting GoodsGuns

8998 impressions

642 views

I have for sale a Mossberg MVP-LC 7.62 MM nato (308 cal) with a Vortex HS-T scope combo Viper HS-T 4-16x44. Brand new never fired a single shot, carbon fibre by pod. Thread on muzzle brake, butt stock adjustable and mag pole grips, metal clip, and spiralled bolt, super heavy flute barrel, adjustable trigger. Also included is a Cabela’s Armor extreme double long- gun case. And also included is a Cabela’s shooting Mat. I bought this just before covid hit , was planning to do some long range shooting at the range, but never happened. Firm on the price . I paid 3100.00

categories:Sporting GoodsGuns

9663 impressions

1231 views

The LRX bullet design increases B.C. values by increasing ogive and boat tail lengths to improve the bullets long range ballistic performance. 100% Copper, Lead-Free bodies. Polymer tip initiates expansion, causing the nose cavity to open instantly on contact doubling the bullets original diameter while creating four cutting petals that wreak extensive internal damage. Box quantity: 50

categories:Sporting GoodsGuns

4537 impressions

594 views

Fierce Mayhem FX 12 Ga. TrueTimber PRAIRIE Shotgun.28 inch barrel,3 1/2 inch chamber.8000 Series Steel - Bolt & Head. Oversized Bolt Handle. Fierce XL Trigger Guard. ERGO - Slim Contour Forearm. MAX-GRIP - Rubberized Forearm Grip. TrueTimber Camo Weatherproof Coating. High-VIS Fiber Optic front bead. Vented Rib with Matte sight plane. Fierce KO Long Range choke tube. Weight: 7.7lbs.Inertia WLR Powered System. Long Range Knock Out power. Flawless 3 1/2” Semi-Auto Magnum feed. Reduced Felt Recoil Improved Target Requisition Proprietary Limbsaver Recoil Pad. The new FIERCE MAYHEM FX® defines performance in a durable and reliable semi-automatic field shotgun. Serious hunters know that the perfect shot starts with the right gun, and this is it. Lightweight and comfortable featuring optimized stock design, custom trigger guard and premium limb saver pads, the Mayhem has the look and feel of the finest field gun at an affordable price. Available in your choice of TrueTimber PRAIRIE or STRATA camo pattern and comes with 3 Fierce flush chokes and one extended FIERCE KO custom extended choke. The FIERCE MAYHEM FX is a valuable addition to your gun cabinet. Brand new.Local is preferred, but will ship at buyers expense. Further Lost insurance can be purchased by the buyer. Valid Pal a Must. Please send message to: medal1958@gmail.com

categories:Sporting GoodsGuns

13380 impressions

844 views

Sako 85 308 Win.Varmint Laminated Stainless, 24" Heavy fluted stainless steel barrel,laminate stock. Perfect for long-range hunting, small to medium game,built to deliver pinpoint accuracy for hunting and target shooting.The heavy, free-floating barrel diminishes vibration and recoil, and makes it easy to zoom in and stay on target.Excellent, like new condition.Local is preferred, but will ship at buyers expense. Further Lost insurance can be purchased by the buyer. Valid Pal a Must. Please send message to: medal1958@gmail.com

categories:Sporting GoodsGuns

21268 impressions

1558 views

Brand new Partial Length Picatinny/ACOG rail, 3 inches long and sits at the back part of the dust cover for a rear bias. It is the perfect length for red dot or holographic sights. It weighs 5 ounces/141g. The AK Master Mount™ patented optic mounts are unique and purpose built products for serious users. They are built as rugged as the rifle itself. It's low profile with a low axis over bore. It also has a unique quick release "Dual Axis Locking" lever and a “2 in 1” top rail design that can accommodate picatinny or ACOG based optics. Made in the USA. Dual-Axis Locking AK optic mounts secure to an AK receiver’s side rail by one of two main methods. The first method uses a rotating lever that has a contoured portion to rotate and lock into a corresponding cut-out in the side rail. Many of the traditional com-bloc optic mounts utilized this design and are broadly referred to as SVD styled mounts. This method is primarily securing the optic mount in the horizontal axis. The second method utilizes a rotating lever to deform the bottom part of the mount to “crimp” onto the side rail. These mounts are not really quick release despite their labeling as such, and this mount deformation makes it difficult to resize the mount to a different side rail on a different rifle. The more modern approach to this method is to use the rotating lever to manipulate a spring loaded clamping bar to compress against the receiver’s side rail to make it quick release capable. These style mounts are prone to “walking” along the side rail with heavy shooting sessions as they only secure the optic mount in the vertical axis. These two techniques have been combined in a patented design to firmly secure our optic mount to an AK’s side rail in both the vertical and horizontal axis to make it Dual Axis Locking. This secure attachment maintains optics zero even with sustained heavy shooting sessions. The clamping bar is also longer than the other optics mounts on the market to provide additional clamping surface contact, and two springs are used in the clamping bar mechanism for increased clamping bar stability and true quick release capability. Low Axis Over Bore The optic mount's low profile hugs the side of the AK receiver and the dust cover to deliver a low axis over bore placement. This allows simultaneous use of the rifle's iron sights if needed. The 12 sided proprietary locking bolt provides for a greater clamping bar tension range, twice that of most optic mounts on the market. This allows for true fine tuning of the clamping bar’s clamping force, and it also ensures proper fitting on side rails of slightly different dimensions on different rifles. Optics zero is maintained. Built Rugged As the AK Itself The optic mounts are machined from a solid block of 6061-T6 aluminum to achieve superior strength, but yet be weight conscious. Its one piece design keeps things simple, maintains structural integrity, and avoids fastener failures or movement that can occur in two piece optic mounts. Likewise the optic mounts were intentionally overbuilt with heavy duty struts to reliably support its integral 2-in-1Picatinny / ACOG rail and any attached optics. Its robust struts then pleasantly blend into the body of the mount which is also rugged enough to withstand whatever abuses are thrown at it. Despite the mounts ruggedness, the edges been rounded and contoured to make it egronomic, snag free and good looking. No wimpy levers here. The throw lever is also heavy duty and is fully inset into the body of the mount to protect it from any snags and accidental release. Accessory Side Rail Built into the struts supporting the top rail are cut-outs that allow for the use of optional Accessory Side Rails. These offset rails allow for use of additional sighting solutions and accessories. Compatibility The AK Master Mount™ AKM version optic mounts are specifically designed for the standard pattern AK side rail. The MasterMount T81 Side Rail was specifically designed to provide ideal positioning, cheek weld and ergonomics when used with a Type 81 rifle. Not compatible with Underfolder. Greater Optics Versatility. Superior Finish. A unique feature of the optic mount is the proprietary rail on the top. The standard picatinny rail pattern has been combined with the ACOG base pattern into one combined rail section. This “2-in-1” rail design allows for more versatility in optics choice by not having to buy two different optic mounts, or an adapter, to accommodate optics with a picatinny base or an ACOG base. The patented AK Master Mount™ optic mount build is made with 6061-T6 alloy completed with a black hardcoat (type III) anodized finish that not only looks great, but adds additional structural strength and wear resistance.

categories:Sporting GoodsGuns

6568 impressions

640 views

Brand new TACTICAL LIGHT WITH RED LASER DESIGNED FOR USE WITH GLOCK® 43X MOS, GLOCK® 48 MOS, GLOCK® 43X RAIL AND GLOCK® 48 RAIL SUBCOMPACT HANDGUNS An industry first, the ultra-compact TLR-6® weapon light with high power LED and integrated red aiming laser features tool-less battery replacement without removing the weapon or the need to re-sight the laser. The light provides 1 hour of regulated runtime when in dual light/laser mode. Designed to securely attach to the trigger guard and rail of the GLOCK® 43X MOS, GLOCK® 48 MOS, GLOCK® 43X Rail and GLOCK® 48 Rail subcompact handguns. Features C4® LED illuminator and a 640-660nm red laser 100 lumens; 2,000 candela; 89m beam distance Runs 1 hour (LED only or LED/laser combo); 11 hours (laser only) Designed to securely attach to the rail and trigger guard of the following standard and compact railed handguns: Springfield Armory® XD®, XD(M)®, and XD® MOD.2® Smith & Wesson® M&P® GLOCK® Parabolic reflector produces a balance of beam and peripheral illumination; optimized electronics provide regulated intensity; red laser provides long-range targeting Ambidextrous switching (push-button on both sides) to access three modes: Laser only; Laser/LED combo; LED illumination only All modes feature a 10 minute auto shut-off to conserve batteries Batteries can be replaced while light remains mounted on gun; no need to re-sight laser after battery change Uses two CR1/3N lithium batteries (included) Removable cover for easy attachment/removal Windage and elevation adjustment screw mounted in brass bushing for dependable zero retention of laser Durable, impact-resistant polymer construction; IPX4 water-resistant; 1m impact resistance tested Operating temperatures of -20°F to +120°F Serialized for positive identification Size varies by model Limited lifetime warranty Assembled in USA

categories:Guns

7564 impressions

776 views

Chiappa LA322 TakeDown Lever Action Carbine, 22 lr, 920.383 The lever-action 22LR is an American classic. Chiappa continues this legacy by using modern technology and materials to produce the LA322. This beautiful rimfire is as attractive as it is functional. Accurate, quick handling and rapid shooting, the LA322 embodies all the qualities that Americans want in a lever-action rifle. A 3/8in dovetail is machined into the top of the receiver for optics. Another coveted feature is the take down design for easy transport and storage. SKU: 920.383 EAN: 8053670717282 Type of Gun: Rifle Caliber: 22 Long Rifle Action: Lever-Action Barrel Length: 18.5″ (470 mm) Capacity: 15 Feed In: Magazine Tube Trigger System: Single Stock: English Style Wood Forend: English Style Wood Front Sight: Fixed Tunnel Rear Sight: Adjustable Elevation & Windage Buckhorn Style Safety: Half Cock Hammer Weight: 5.52 lbs Length: 35.5″ (902 mm) Material: Alloy Frame / Steel Barrel Finish: Blued Lever Style: Standard Extraction: Auto Ejection FAMILY OWNED – SINCE 1958 – MADE IN ITALY The History A curious nature, a passion for firearms and a love for challenges have always guided our path at Chiappa Firearms. There will always be another challenge to take on and we’ll not be afraid to play the game. The history of Chiappa Firearms began in 1958, when Ezechiele (Oscar) Chiappa opened his company and called it Armi Sport. Initially an artisanal workshop, the company has grown over the years to become an industrial group, still wholly owned by the Chiappa family. Chiappa includes the companies Chiappa Firearms S.r.l. (defense, sporting and replica firearms), KIMAR (blank and signal guns), ACP (training systems), Costa S.r.l. (surface treatment of metals) and Chiappa Firearms USA, Ltd. (USA’s distribution center). The success story of the Chiappa derives from a combination of factors, among which are a great technical experience matured over 60 years; ability, the courage and entrepreneurial spirit of the President Rino Chiappa, and the total dedication to work of the whole Chiappa family. These capabilities have lead Chiappa to a series of winning choices, focusing on technological advancement, on understanding and meeting the needs of the market while constantly introducing new models, but also offering accuracy and continued support to customers. All stages of production are carried out entirely within the company. The manufacturing process begins with the design of the 3D model, followed by the realization of prototypes and the transfer of data to CNC machines. Through specific CAM software, the machining equipment is able to produce any component in a very short time taking instructions directly from the 3D drawings. Order and organization are common to all factory departments: the workshop with numerical control machines (CNC) for the processing of components machined from solid steel such as receivers and breeches, or for the realization of all types of stocks and other small parts; manufacturing of barrels; die casting and molding of plastic material; ovens and equipment for heat treatment; surface treatment, such as bluing, parkerizing, nickel plating, as well as equipment for grinding and polishing of metal and wood components. The entire manufacturing process is managed and coordinated by a computer system that encompasses all steps of production. This system allows for a thorough control of the execution time, thus keeping production costs tightly monitored. Finally, all firearms are visually inspected and test fired in the shooting range built inside the company before being brought to the packaging area. Thanks to the experience of the personnel, the tradition of artisan craftsmanship cohabits with a modern organization within the same factory, fostering maximum efficiency. Chiappa manufactures a wide range of models. The catalog includes replicas of American historic weapons and muzzleloaders, lever action shotguns and rifles, handguns and rifles in .17 and .22 rimfire, sporting and self defense handguns such as the famous Rhino, signal guns and air guns. As a direct result of the optimization of the manufacturing process, all Chiappa products are an excellent value. Chiappa today is a rapidly developing, constantly evolving corporation. The great capacity to innovate with flexibility and dynamism, the wide range of products and the excellent value for the consumer have allowed Chiappa to spread sales in 60 countries, being fully able to compete with the biggest companies in the world.

categories:Guns

50935 impressions

4014 views