For sale Browning Collectors Special BPS Pump 28 Ga 26 " Barrell . Never fired . Mint Condition . Vent Rib Barrel. Do not have original box . Made in Japan . Loads and ejects threw the bottom . Great for Left or Right handed shooter Pics to Follow

categories:Sporting GoodsGuns

9683 impressions

466 views

Selling/trading a Big Game Deluxe shooting bench. Overall it's in fair shape. Shows some weathering on the leather. Seat has a tape repair, top table layer is starting to curl up a bit on the edges. Sets up easy and comes with an adjustable stand as seen. Adjustable for left or right handed shooters. Looking for $200. Open to all trades. Can send more pictures upon request. Pm or text/call 204 795 2850 for more info.

categories:Sporting GoodsGuns

3163 impressions

338 views

Custom leather holsters. Left or right hand. Initials, brands, logos. See my other ads for more pictures. If you have an idea for something original let me know.

categories:Sporting GoodsGuns

38112 impressions

2002 views

Brand new New Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts. The SCP-3001 is designed for use on Picatinny rails and features two classic rings. The SCP-series of mounts can also be rotated for left or right handed shooters, and feature two separate side clamps. 0 MIL/0 MOA Height: 30 mm/1.18” Clearance: 8 mm/.314" (from the bottom of the tube to bridge of the mount body) Length: 108 mm/4.25” Weight: 145 g/5.1 oz 10-degree wedge included Note: Will not fit the SAKO S20 or rifles with 2-piece rails

categories:Sporting GoodsGuns

11827 impressions

474 views

Brand new New Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts. The SCP-4006 is designed for use on Picatinny rails and features one classic ring and one interface ring, which can be rotated as to position the interface/accessory in either the 12-o'clock or 3-o'clock position. The SCP-series of mounts can also be rotated for left or right handed shooters, and feature two separate side clamps. 0 MIL/0 MOA Height: 34 mm/1.35” Length: 108 mm/4.25” Weight: 154 g/5.4 oz 10-degree wedge included Note: Will not fit the SAKO S20 or rifles with 2-piece rails

categories:Sporting GoodsGuns

11212 impressions

394 views

Brand new New Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts. The SCP-3000 is designed for use on Picatinny rails and features one classic ring and one interface ring, which can be rotated as to position the interface/accessory in either the 12-o'clock or 3-o'clock position. The SCP-series of mounts can also be rotated for left or right handed shooters, and feature two separate side clamps. 0 MIL/0 MOA Height: 24.5 mm/1” Clearance: 3.4 mm/.133" (from the bottom of the tube to bridge of the mount body) Length: 108 mm/4.25” Weight: 134 g/4.7 oz 10-degree wedge included Note: Will not fit the SAKO S20 or rifles with 2-piece rails

categories:Sporting GoodsGuns

10273 impressions

393 views

Brand new New Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts. The SCP-3001 is designed for use on Picatinny rails and features one classic ring and one interface ring, which can be rotated as to position the interface/accessory in either the 12-o'clock or 3-o'clock position. The SCP-series of mounts can also be rotated for left or right handed shooters, and feature two separate side clamps. 0 MIL/0 MOA Height: 30 mm/1.18” Clearance: 8 mm/.314" (from the bottom of the tube to bridge of the mount body) Length: 108 mm/4.25” Weight: 147 g/5.2 oz 10-degree wedge included Note: Will not fit the SAKO S20 or rifles with 2-piece rails

categories:Sporting GoodsGuns

10955 impressions

466 views

Brand new The ASAP QD (Ambidextrous Sling Attachment Point QD) allows a wide range of motion, enabling true ambidextrous weapon manipulation for both left and right handed shooters. Replacing the standard AR15/M4 carbine stock receiver end plate, the ASAP QD provides a tactical advantage by minimizing sling snagging and facilitating easy transition to and from weapon and reaction side shoulders. The ASAP QD works with one-point type slings with push-button quick disconnect sling swivels such as the MS4 GEN 2. Made from precision cast black Melonite™ finished steel and compatible with both mil-spec and commercial-spec carbine receiver extensions. Features: Accepts any push-button QD sling swivel as well as the Magpul QDM Durable steel construction Case hardened and finished with Melonite™ for extreme resistance to wear and corrosion Works with both mil-spec and commercial-spec carbine receiver extensions (buffer tubes) NOTE: The ASAP QD is NOT compatible with A1/A2 fixed stocks as well as any other similarly mounted stock such as the Magpul PRS®, UBR®, and MOE® Rifle Stocks.

categories:Sporting GoodsGuns

5383 impressions

438 views

Please text anytime 6476871484. Brand new In original box. Ultra Compact Green Laser Sight for Pistol Handgun, Rechargeable. IIIA Class high visible green laser power output ≤5mw, features 520nm wavelength. Bright green beam can be used in all lighting conditions - day or night! reaches 200 meters during day and up to 2000 meters at night. Operates in constant beam and strobe function. Constructed from reinforced nylon housings, small and extremely lightweight, perfect for target shooting, concealed carry and will fit most holsters designed for rail mounted lasers. Comes with 5 rail locating keys for Glock, G2C G3C ,1913 Picatinny, Beretta 90two, S&W 99 and S&W TSW and Sig P320 which ensures solid locking and zero holding, designed to resist bidirectional recoil force. Easy to operate, friendly ambidextrous switch for both left or right handed. Built-in magnetic USB rechargeable for easy charging without any removing operation. Fit all size pistol that have a rail, from sub-compact / compact pistols to standard size pistols. Fully windage and elevation adjustments.

categories:Sporting GoodsGuns

20609 impressions

945 views

Feed your old beauty, make her and yourself happy again! Newly made 41 Swiss brass cases from brand new Starline 50 Alaskan brass cases：cut，annealed with AMP annealer，formed using Lee 41 Swiss full length sizing die，trimed with case length 1.525”（ Observed that feeding reliably with loaded ammo OAL length between 2.180“-2.220”, so with 0.005'' extra length for possible cast bullet variation, instead of 1.520'', easily trimed off the extra 0.005'' brass if you don't like it ), cleaned off lube then annealed once more, tested to extract and eject reliably. Ready for reloading. 9$ each+shipping , minimum 12 pcs. Have some hard cast bullets cast with customized heeled bullet mold designed by myself (http://accuratemolds.com/bullet_deta...bullet=43-310F) to go with those cases if you desire, all lubed with Alox and sized with .429'' Lee bullet sizer, lubed with Alox again ( tested free of leading, even after more than 100 shots, no leading observed: yes, Vetterli is so fascinating, I did extensively loading test with more than 1000 rounds through my M78 and M69/71 and then designed my own bullet for her and am thinking of designing a paper patch bullet. ) , tested to be working quite well : check those 5-shot and 10-shot groups shot at 40 meters indoor range with 1869/71 Vetterli rifle). Ready for reloading. 0.5$ each+shipping, sorry, 3 bullets per case ordered limited due to limited bullets quantity, no place to cast bullets during winter time, should be able to cast more bullets after winter. With my cast bullets and Lee 41 Swiss full length sizing die sized brass cases, you can hand seat the bullet, then use Lee 41 Swiss seating die with seating stem removed to give the loaded round a very firm and consistent crimp at the first groove from the bottom ( the seater will clear the bullet instead of the case mouth), by feeling that the case mouth brass is crashed a little bit ( it is ok that the bullet might be turned by hand inside the case mouth after crimping, but it would be firmly seated, won't be pulled out by hand)，don't go too much，too much crimp might cause the case mouth bumping up too much and you might encounter difficulty to chamber especially with those Vetterlis with tighter chamber. Photo 5 & 6 show that the right one was hand seated before crimping, the left one was properly crimped, and the abovementioned cast bullet. FYI only, use it at your own risk: I found using the recommended charge from the internet of 11 grains of Trail Boss to be around 2200 fps and kicks hard，eventually I reduced the charge to 7 grains of Trail Boss to achieve around 1400 fps, very close to Vetterli designed velocity and very mild and pleasant kicks, no grease cookies, no wads needed. I rendered that the 11 grains of Trail Boss charge was gained from improperly reloaded rounds not using heeled bullets and not getting proper crimp. I did tests with Tripple 7 also, found the data on the internet is way too much also, I got 1900 fps muzzle velocity reducing the charge to 24 grains by weight of Tripple 7, which is only half full of case capacity！I did not go further experimenting with Tripple 7, cause I got very good results with Trail Boss, and I did not enjoy cleaning the bore after every range trip burning Tripple 7.

categories:Guns

9558 impressions

833 views

Selling because cash is tight and I have another - don't miss your chance to add this beautiful investment to your collection. This superb Webley WG Army specimen was made by P. Webley & Sons circa 1896 chambered in .476 Eley and .455 Webley, and sold by the famed John Rigby & Co. in London. Established in 1775, John Rigby & Co remains to this day a staple of the fine firearms market. Their role in this piece's history adds even further to collector value. These revolvers were very popular private purchases among sportsmen and higher ranking officers around the turn of the 20th century up through WW1 as reliable, accurate, and elegant handguns. With an impressive 6" barrel and mirror-bore rifling, this is a collector's or target shooter's dream. I can add a box of 50 factory new Fiocchi Heritage .455 Webley rounds with purchase of the revolver if you have a PAL. If you don't want these rounds, take $100 off asking price. As a pre-1898 antique, this can be owned and used without any registration or headaches. Visually this revolver retains most of its original shiny dark blue finish with scattered minor loss from 130 years living. The trigger, hammer, ejector, cylinder release mechanism, and hinge screw have a shiny silver "in the white" finish giving a proud and bold contrast. The original checkered square bottom hardwood grips are solid, showing some minor dings and a tiny chip on the right. Sharply stamped "WG Army Model" on the top strap with calibers ".455/.476" Webley and Eley, and the W&S winged bullet logo on the left of the frame. The barrel is hand etched with the retailer address "JOHN RIGBY & Co. 72 ST JAMES'S St LONDON S.W.". The serial 13XXX places manufacture in the mid-late 1890s and makes this one of the most modern antiques you can get. The bore retains shiny, strong rifling with scarce patches of wear. The action functions excellent in single and double action, leaving nothing to be desired. The cylinder indexes and locks up with almost no wiggle for reliable firing and the timing is excellent. Comes with FRT antique papers and repro leather Webley holster. Can come with box of Fiocchi .455 Webley ammo if you have a PAL. Call any time or local meetup Calgary or Vancouver depending where I am. Ships Canada No PAL, 18+ Check my ads for more antiques! I make no claims about the safety of shooting ANY antique. Check with your gunsmith! (Tags: England, Britain, French, MAS, German, Reichs, American, Canadian, Dominion, .44, .45, .450, .476, ACP, Auto, Boxer, Kynoch, Smith & Wesson, Remington)

categories:Sporting GoodsGuns

24342 impressions

1275 views

I have a Iver Johnsons Champion 16 gauge single shot for sale. Arms and Cycles works (Canada) LTD- Montreal Made in oobourg. (choke bore, Barrel and lug forged in one) 30 inch barrel. Gun is in good working order. locking release spring worn and has to be locked manually. Stock has very nice hand made wood burning on fore end and left side butt stock picture of elk. All hand made.  open to trades, Located in evansburg but make frequent trips to spruce grove .

categories:Sporting GoodsGuns

75234 impressions

3500 views

Magnificent rifle Antonio Zoli made in Italy. 30-06. With hard case, only used at the shooting range, 2- boxes.Bolt on the left side. In perfect condition, a magnificent beautiful wood . (New Hand forged knife. Skinner knife hardness 62. Handle Mammoth tusk blade Austrian steel Bohler. This is a bonus for those who buy AZ.).Browning carbon limited edition 7mm. Browning cenergy CX 12 gage. I would preferably want to sell everything together if the price would be higher separately. Super condition!!!! 9.9 from 10. All with boxes.

categories:Sporting GoodsGuns

160325 impressions

12111 views

Selling/trading a Marlin 30 AS 30-30. Overall it's in good shape. JM stamped, 20" barrel. Bluing shows well on the majority of the rifle with the exception of the right hand side of the receiver where it looks like moisture sat on it and took of the finish, has lightly freckled as seen in pictures. Wood stocks are in nice shape, some light finish loss and handling marks throughout and one fairly decent rub on the left side of the forestock. Bore is excellent. Comes topped with a Tasco 3-9x40 scope with 1" Weaver rings. Front sight is present, rear sight is not. Looking for $950 shipped. Insurance by request on buyer. Open to all trades. Can send more pictures upon request. Pm or text/call 204 795 2850 for more info.

categories:Sporting GoodsGuns

2104 impressions

205 views

Antique status Swiss 1882 manufacturered by Waffen Bern. One of the most sought after antiques, this revolver is chambered in 7.5 Swiss ordnance which is still available from Fiocchi. This revolver is commonly used with .32 sw longs, although the cases may bulge. S&B .32 longs is not recommended as the case rims are smaller than normal and may cause light strikes, all other brands are functional. The revolver itself is in very good condition, lockup and timing are tight. The bore is shiny as most of these revolvers are. Bluing is in good shape. The gun comes with a custom western quick draw holster that is formed to the gun, with the standard right hand attachment point or the holster can be swapped to the left side for a reverse draw set up. Pick up available, shipping included with insurance on buyer. Good pistol for bushwhacking and ranch carry. The gun will also come with a copy of the frt and a hard case. Please inquire if you need more pictures. Cash or etrasfer only. No pal required, just proof of over 18 Please check with a gunsmith before firing any antique firearm for the first time

categories:Sporting GoodsGuns

4981 impressions

232 views

Please text anytime 6476871484. Fully functional double action revolver in perfect condition. Compact pocket revolver high quality and can fit in the palm of your hand.. No PAL required. Comes with FRT paperwork. Reloadable ammo is available but sold separately. Iver Johnson "American Bull Dog", .38 RF short and long Revolver Iver Johnson was one of the most prolific makers of pocket revolvers in America, from 1871 to nearly the present. One of the earliest makers of bulldog-type, double action revolvers, the Iver Johnson American Bull Dog is well known and in demand. These were made by Johnson's and the relief grip showing the American eagle on a shield is typical of Johnson's ware. ​ This one is in very fine to excellent condition, with 99% original nickel. The action is accurate and strong, and the cylinder indexes and locks properly with no play. The bore of the 2 1/2-inch barrel is good with strong rifling throughout. The black hard-rubber grips are excellent and undamaged. SN 2407, excellent overall. History & Background Iver Johnson (1841-1895) was a Norwegian gunsmith who came from Bergen to America in 1863. He found work immediately at Ethan Allen's factory in Worcester, Mass. where he met Martin Bye. Johnson worked at Allen's through the civil war years, as demand for firearms was high, and work was plentiful. By 1871 Johnson and Bye had decided to venture out on their own and founded Johnson Bye & Co. in Worcester, moving to Fitchburg by 1891. In 1883 Martin Bye left the company, selling his interest to Iver. The company name was changed to its most famous form, "Iver Johnson's Arms & Cycle Works, Fitchburg, Mass.", a name it would retain until the outbreak of the First World War. Iver Johnson did not only produce a large variety of firearms, they were also famous for their excellent quality bicycles and motorcycles. The company would remain in business until 1993. The name was "revived" in 2006 and the brand is still used today.

categories:Sporting GoodsGuns

18997 impressions

841 views

Siderlock Safety Trigger Kit. Designed to fit Glock Gen 1-4 Models: G17, G17L, G18, G19, G29, G29SF, G20, G20SF, G21, G21SF, G22, G23, G24, G25, G26, G27, G28, G30, G30S, G30SF, G31, G32, G33, G34, G35, G36, G37, G38, G39, G40, G41, G42, G43X, G47, G48. Does Not Fit: Gen 5 Models. Siderlock Safety Trigger's Help Prevent Accidental Discharge!! The Glock pistol has a combination of three automatic safety features (trigger safety, firing pin safety and drop safety), which are sequentially disengaged when the trigger is pulled. The central pivot of the trigger is the first safety mechanism to disengage when the trigger is pulled and therefore the most important. The safety pin of the Siderlock trigger is a precise positioning system and when engaged blocks the movement of the central pivot avoiding an accidental discharge of the weapon. The Siderlock trigger offers the option of keeping the pistol in its original firing configuration simply by not engaging the lock. The Siderlock concept is simple: With a push on the safety pin a sliding pin acts to block or release the movement of the central pivot of the trigger, where by avoiding an accidental discharge when the slide is in the block position, and behaves exactly as the original Glock trigger when in the release position, all the while maintaining the original manufacture specifications. Once the Siderlock trigger is installed on the pistol, firing is accomplished by sliding the safety pin to the left prior to pulling the trigger. Preventing firing is obtained by simply sliding the safety pin to the right (Right hand Shooter assumed). For left-handed shooters, simply remove and invert the safety pin using the tools and instructions provided with the Siderlock trigger. No matter which position the slide is in it never extends beyond the trigger guard, avoiding any accidental contact with the holster ether inserted or withdrawn. Siderlock adheres to the same high manufacturing standards as Glock, using only high quality materials, a simple design and construction process, and therefore is guaranteed for life. Features: Replaces factory trigger. Adds an extra measure of safety. Avoids an accidental discharge. Maintains Glock original specifications, and fits all Glock Gen 1-4 models. Easy installation, includes detailed instructions and images. Ambidextrous and dismantled. High quality materials. Does NOT fit Gen 5 Models. See our complete line of Glock Products here Note: NDZ always recommends any part be installed by a qualified and trained gunsmith. NDZ promotes the use of safety practices and gear when working on any firearm. DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. Proposition 65: Click for Proposition 65 Warning Product Features Manufacturer: Siderlock Type: Trigger Safety Accessory Model: Safety Trigger Country/Region Of Manufacture: Made in USA Color: Black For Gun Make: Glock For Gun Generation: Gen 1-4 For Gun Model: G17, G17L, G18, G19, G29, G29SF, G20, G20SF, G21, G21SF, G22, G23, G24, G25, G26, G27, G28, G30, G30S, G30SF, G31, G32, G33, G34, G35, G36, G37, G38, G39, G40, G41, G42, G43X, G47, G48 Does Not Fit: Gen 5 Models

categories:Sporting GoodsGuns

22673 impressions

600 views

Ad Title: Unknown Maker Made in Italy, Percussion Rifle, Cal. .54 Make : Unknown Maker Made in Italy Model: N/A Serial Number: 59995 Type of action: Percussion Rifle Barrel length: 28 inches Caliber: .54 Percussion. Note: Comes with set trigger and a copper box in the stock. Octogonal barrel with rifling. This rifle is heavy being 6,6 pounds. Condition: Very Good condition. The barrel has most of its blue except where the hands were holding the rifle. The action has a nice case hardening. Seems to be in very nice working condition. At one time there was a scope attached to this rifle. Now we are left with 4 holes where were the screws. Price: $395.00 Ref: 24A147 Shipping: $70 in Canada ($40 if Barrel and action are separated from the stock) Basic Insurance: $100 included with all purchases Full insurance: Add 2% of the value of your purchase to get full coverage Payment: By E Transfer

categories:Sporting GoodsGuns

15048 impressions

1124 views

Not your average x bolt Skip fluted “heavy sporter” hand lapped 26” barrel Spiral fluted bolt True carbon fiber stock 20moa browning base NO SCOPE,RINGS, BIPOD, SLING- RIFLE AND RAIL ONLY!! Recoil hawg brake with tool and cap Under 150 rds through it Comes with whatever ammo I have left at the time (likely 6-8 boxes) plus a shwack of once fired brass(mostly hornady) Shoots lights out, 1/2 moa 2400obo in BC Pls text first

categories:Sporting GoodsGuns

14049 impressions

1055 views

Selling/trading a few Dan Wesson Model 15 barrels and parts. The two prohibited barrels will require a valid 12(6) license to purchase, and the restricted barrels will require a valid restricted license. As follows: 1. 8" vent rib barrel, solid underlug w/ shroud. Bore very good. $495 shipped 2. 6" vent rib barrel, solid underlug w/ shroud. Bore very good. $495 shipped 3. 4" vent rib barrel, solid underlug w/ shroud. Bore very good. $495 shipped 4. 2" vent rib barrel, solid underlug w/ shroud. Bore very good. SOLD 5. 4x interchangeable front sights (2 white, 2 yellow). $45 each 6. Spring Kit #12 (assuming factory). $20 7. Wood grips, modified to fit a smaller hand. $50 8. Factory "Pistol Pack" case w/ correct yellow lined inside (no keys for locks). $195 shipped I'll be keeping one of the non restricted barrels, whichever one is left after the first one sells. Shipping included on the barrels and case, flat rate shipping of $18 on the sights, springs and grip. Open to selling the collection as a lot. Open to all trades. Can send more pictures upon request. Pm or text/call 204 795 2850 for more info.

categories:Sporting GoodsGuns

4559 impressions

684 views

BNIB HBI-10237-01 Buyers pay the shipping, contact me for an estimate. CZ Bren 2 Handguard 13.8″ M-Lok (GEN 2) The HBI 13.8″ handguard for the Bren 2 MS is ideal for 14″ barrel models in both 556/223 and 7.62×39 calibers. Our 13.8″ handguards are designed to truly “free float” the barrel and provide the operator with over 3x the support hand area and over 7x the M-Lok positions as compared to the factory Bren 2 MS handguard. PEQ-15/ATPIAL type IR sight systems and peripheral switches are easily mounted out front above your support hand thanks to a full length continuous 1913/picatinny top rail. Our extended Bren 2 MS handguards feature a window at the gas block that has been carefully designed to allow operator access to gas system adjustments while in use. The gas block window is bridged with a removable 1913 plate. With the 1913 plate removed, the gas block and regulator are exposed for complete disassembly and cleaning. This two piece design allows access to the gas system without having to remove the handguard shroud from the weapon. Additionally, the use of two countersunk screws to secure the 1913 plate means that sighting systems mounted the to 1913 plate WILL retain zero when the plate is removed/reinstalled after cleaning. Every handguard includes an integrated QD mounting plate system for seamless sling integration on either the left or right side. Additionally, we are proud to offer a direct mount light variant compatible with Surefire® 300/600, StreamLight® Protac Rail, Modlite 18650 series, and other popular bodies. The simple and robust mounting design replaces a single M-Lok position with body specific mounting geometry for weapon lights. This light mounting solution offers the simplest, lowest profile, lightest weight, and arguably most rigid light body integration at no additional cost. If your application requires a weapon light, you might want to consider this option. Features 13.8″ M-Lok Handguards for the CZ Bren 2 MS Gen 2 Two Piece Design With Direct Access to Gas Regulator M-Lok Accessory Interface, Full Length 1913 Top Rail QD Mounting Plate Included Optional Direct Mount Light Geometry for select Surefire® and StreamLight® Bodies Total Weight Installed is 12.04 oz (Factory Bren 2 MS Pistol Handguard is 10.27oz) Machined Aluminum 6061, Anodized MIL-A-8625 Type 3 Hard Coat Multiple Patents Pending Designed and Manufactured completely in USA. 922r Compliant.

categories:Guns

9405 impressions

621 views