Mint condition rifle. No major sratches, and no paint chips or anything like that. It’s been my go to set up for the last couple years. Maybe 200 rounds through it  Bronze Serracoated barrel. 1.5lb to 4lb triggertech trigger. Limbsaver buttstock and sling. Threaded barrel with a muzzle break on it.  Selling with or without scope. Scope is a Steiner GS3 4-20x50mm. Amazing glass and perfect for long range Bare riffle: 1800$  Bare Scope: 1200$  Riffle with scope, rings, 20 hand loads, and sling: 3250$ Willing to trade for a lightweight mountain set up. 

categories:Sporting GoodsGuns

4081 impressions

292 views

Speer,Sierra bullets 18 factory rnds and 18 hand loads $100

categories:Sporting GoodsGuns

13565 impressions

679 views

For Sale : A Left hand Christian Mesa 7PRC PLUS , 40 rounds hand loads 175gr ELDX . Also 7 PRC Hornady Dies and 100 rounds of new Brass. The load is 65.6 grains of Vihtavuori N -165 .And the lands are 3655 . The loaded ammo is 3565 off the lands and shoots 3 shots under a dime at 100 yards .

categories:Sporting GoodsGuns

48200 impressions

1578 views

2 3/4" Ithaca Model 37 featherweight (30” full choke barrel) in excellent condition. Gun ejects shells below receiver so excellent for a left handed shooter. Will ship at buyer’s expense. A valid PAL is required for the Federal Transfer Process. Comes with soft case if picked up in Calgary. This is a nice shotgun for a beginner shooter.

categories:Sporting GoodsGuns

5061 impressions

273 views

For sale Browning Collectors Special BPS Pump 28 Ga 26 " Barrell . Never fired . Mint Condition . Vent Rib Barrel. Do not have original box . Made in Japan . Loads and ejects threw the bottom . Great for Left or Right handed shooter Pics to Follow

categories:Sporting GoodsGuns

9681 impressions

465 views

For sale is a Browning B-92 Centennial (1878-1978) lever-action rifle in .44 Mag. This limited edition model has beautiful engraving on the receiver, and a gold trigger. It also has a gold saddle ring! This rifle has a top-eject action (great for both right and left handed shooters). It is in great condition, with low round count. There are a few minor handling marks from normal usage.

categories:Sporting GoodsGuns

9919 impressions

350 views

Bushnell scope that tells you how many yards an object is. Great for multiple rifles. Has a hand devise that makes it easier to sight in the yardage. Great visual and is a really great scope! My shots were always accurate! Great if you don’t wanna make the extra travel and don’t want to just free stand. Well taken care of. Hate to part with it, but wanted a different scope for my oak 270 rifle.I am open to any offers. Please message me for more info.

categories:Sporting GoodsGuns

18042 impressions

690 views

Brand new Non-restricted SKU: 920.390 Action: Lever Action Caliber: .357 MAG Capacity: 6 Barrel Length: 12″ (305 mm) Feed In: Magazine Tube Stock: Hand Oiled Walnut Pistol Grip Forend: Hand Oiled Walnut Front Sight: Fixed Blade Rear Sight: Short Buckhorn Safety: None Length: 24″ Material: Steel Finish: Color Case Receiver/Blued Barrel Made in Italy

categories:Sporting GoodsGuns

9387 impressions

495 views

This is an custom 7mag Left Hand rifle by Insite Arms ,It has a Hardy barrel and a Ben and Carlson Stock ,also a Trigger time trigger .

categories:Sporting GoodsGuns

63509 impressions

843 views

Howdy Townpost! I've got a nice little uncommon and good condition subcompact Remington for sale now! This started its life as a Remington Model 1865 New Model Police as a cap and ball percussion revolver in .36 caliber. Many of these were never percussion guns as they existed in a weird transition period. And Remington made some of them from the ground up as cartridge guns. This one most likely was in inventory as a percussion revolver and was turned into a .38 rimfire cartridge revolver based on the serial number, in my opinion. These are one of the more rare and lesser known Remington cap and ball guns that were made. Remington only made 18,000 between 1865 and 1873. So they are relatively uncommon and scarce gun today. This is actually my personal favorite model of Remington percussion revolver they're a very handy subcompact-sized gun by today's standards they're bigger and much more comfortable in the hand in the grip than the pocket models but nice and light unlike the full size military .44s and they point very naturally. This particular example is in very good condition the nickel is a very high percentage of coverage some of the original silver plate is still visible on the trigger guard and some of the low areas. The color case hardening is still very colorful and defined on the hammer (pictured). The grips have been refinished but they are the originals. The wood grain is very interesting and beautiful in my opinion. The bore is in excellent condition especially for a Civil War era black powder firearm. This was likely carried in a police officer's holster and not fired much. It was well taken care of and the clean and good condition bore and chambres are reflection of that. The the mechanical function of this firearm is excellent as well. When I got the firearm it was actually in amazing condition to begin with and the mechanical function was perfect. It locks up and times perfectly. The hammer and the trigger pull are very crisp, light and smooth. And didn't require any adjustment, Remington did the job and they did it right the first time. The entire revolver has been taken apart and given a gunsmith's cleaning and was reassembled and lightly oiled. I came across a nice little Hunter leather holster at a gun show and found that it fit this gun very well so it's included as a freebie with the gun (pictured). The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:Sporting GoodsGuns

20617 impressions

1198 views

Selling/trading a Big Game Deluxe shooting bench. Overall it's in fair shape. Shows some weathering on the leather. Seat has a tape repair, top table layer is starting to curl up a bit on the edges. Sets up easy and comes with an adjustable stand as seen. Adjustable for left or right handed shooters. Looking for $200. Open to all trades. Can send more pictures upon request. Pm or text/call 204 795 2850 for more info.

categories:Sporting GoodsGuns

3162 impressions

337 views

Please text anytime 6476871484. Fully functional double action revolver in perfect condition. Compact pocket revolver high quality and can fit in the palm of your hand.. No PAL required. Comes with FRT paperwork. Reloadable ammo is available but sold separately. Iver Johnson "American Bull Dog", .38 RF short and long Revolver Iver Johnson was one of the most prolific makers of pocket revolvers in America, from 1871 to nearly the present. One of the earliest makers of bulldog-type, double action revolvers, the Iver Johnson American Bull Dog is well known and in demand. These were made by Johnson's and the relief grip showing the American eagle on a shield is typical of Johnson's ware. ​ This one is in very fine to excellent condition, with 99% original nickel. The action is accurate and strong, and the cylinder indexes and locks properly with no play. The bore of the 2 1/2-inch barrel is good with strong rifling throughout. The black hard-rubber grips are excellent and undamaged. SN 2407, excellent overall. History & Background Iver Johnson (1841-1895) was a Norwegian gunsmith who came from Bergen to America in 1863. He found work immediately at Ethan Allen's factory in Worcester, Mass. where he met Martin Bye. Johnson worked at Allen's through the civil war years, as demand for firearms was high, and work was plentiful. By 1871 Johnson and Bye had decided to venture out on their own and founded Johnson Bye & Co. in Worcester, moving to Fitchburg by 1891. In 1883 Martin Bye left the company, selling his interest to Iver. The company name was changed to its most famous form, "Iver Johnson's Arms & Cycle Works, Fitchburg, Mass.", a name it would retain until the outbreak of the First World War. Iver Johnson did not only produce a large variety of firearms, they were also famous for their excellent quality bicycles and motorcycles. The company would remain in business until 1993. The name was "revived" in 2006 and the brand is still used today.

categories:Sporting GoodsGuns

18963 impressions

839 views

Please text anytime 6476871484. Fully functional double action revolver in perfect condition. Compact pocket revolver high quality and can fit in the palm of your hand.. No PAL required. Comes with FRT paperwork. Reloadable ammo is available but sold separately. Forehand & Wadsworth " number 32 Double Action", .32 RF Pocket Revolver This one is in excellent condition. The nickel plating is intact. Factory Engraved. The action is crisp and strong, and the cylinder indexes and locks properly and tightly. The bore of the 2 1/2 inch barrel is very good and bright with sharp rifling. The grips are very fine and undamaged. SN 13745, excellent overall. ​ History & Background Sullivan Forehand was an employee of Ethan Allen, the famous New England gunmaker. In 1860 he worked in an administrative capacity when he met his future wife - Allen's daughter - at work, and after marrying into the family became a partner in the business. Henry Wadsworth, an officer in the union army, met another of Allen's daughters while still in service during the war, and married into the family as well. Upon his discharge from the army, Wadsworth joined the company which was renamed "Ethan Allen & Co." After Allen's death in 1871, the two sons-in-law took over the firm and renamed it "Forehand & Wadsworth. They would become well known especially for their bulldogs, but also their many fine pocket and large-frame revolvers, single-shot deringers and pistols. Forehand & Wadsworth remained in business until 1890 when Henry Wadsworth retired and Sullivan renamed the company "Forehand Arms". After Sullivan's death in 1898 the company foundered and was taken over by Hopkins & Allen in 1902.

categories:Sporting GoodsGuns

10142 impressions

638 views

Tapco Intrafuse stock with left hand folding stock Price is obo

categories:Sporting GoodsGuns

5680 impressions

346 views

Selling/trading a Stevens Model 820B 12 gauge pump. Overall it's in very nice shape. 28" barrel, 2 3/4" chamber, fixed full choke. Bluing is all in nice shape with a high polish colour, has some light scratches along the right hand side of the barrel. Wood stocks are also in nice shape, a few hairlines at the wrist but no movement to note. Bore is excellent. Overall a nice clean 820. Looking for $295 shipped. Insurance by request on buyer. Open to all trades. Can send more pictures upon request. Pm or text/call 204 795 2850 for more info.

categories:Sporting GoodsGuns

3740 impressions

479 views

CZ right hand bolt action 30 06 rifle with CZ scope rings and Minox 3x9x40 scope usal blueing rub off and hunting dings. Dtovk is dolid no cracks bolt is tight and smooth . Bore in good condition and clean top load mag and drop door.limb saver rubber shoulder pad and sling.

categories:Sporting GoodsGuns

5182 impressions

447 views

Howdy Townpost! I have a truly amazing one of a kind piece here for sale. I bought this for myself in the US over a year ago and I had it professionally restored and fully repaired. I am now looking to sell it. John Forbes, of Liverpool, was gunmaker to His Royal Highness, the Prince of Wales, later King George IV. And according to my research made mostly dueling and target pistols, and some small pocket pistols for only 5 years. Those years being 1805-1810. He spelt his name with I or Iohn and later switched the spelling to a J or John based on public records and some of the other examples of his dueling pistols that have sold at auction. That makes this a very rare and finely made pistol. This pistol would have cost a small fortune at the time it was made. Oftentimes dueling pistols come in pairs but it was cheaper to buy just one if they were offered as a single, and should you encounter someone who has insulted your honor and you demand satisfaction from them, they can bring their own pistol to the duel. The engraving is extremely fine, intricate and skilled. It would have taken many dozens of hours to complete and it was all done by hand. The engraving features drums, banners and spears, floral patterns, sunbursts on the base plate and lock, and a pineapple in the front of the trigger guard, which symbolizes wealth and status. Because this gun is a percussion conversion of the original flintlock mechanism the percussion hammer is engraved in a different style by a different engraver in a more simple floral and fish mouth style of engraving with gold inlay. Every screw is engraved to look like a flower and the escutcheons are also each engraved like a wreath. Overall there is a lot of fine detail with some simpler and less detailed later additions on the percussion mechanism and one spot on the side plate. The gun features gold inlay on the hammer which largely worn away. There is silver inlay on the outside of the breach, and a sterling silver wreath styled band wrapped around the base of the grip and a sliver bead front sight. The ramrod tip (which is a replacement) is silver plated brass, so too are the front stock cap near the muzzle, the rod pipe, cross key, and escutcheon around it are too. The grip baseplate is silver plated steel. The workmanship of this pistol is certainly of a quality of gunmaker worthy enough of being the gun maker of the Prince of Wales. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it too.

categories:Sporting GoodsGuns

21078 impressions

608 views

Brand New In Box Hard to find and get your hands on one of these! • Calibre: .223 Wylde (5.56 NATO) • Action: Bolt • Barrel Length: 19" • Barrel Twist Rate: 1:8 • Barrel Profile: Full Profile Non-Fluted Barrel • Barrel Finish: Black Nitride • Handguard Length: 17" • Handguard Profile: V1 M-LOK Handguard • Receiver and Bottom Metal Material:  High quality, domestically sourced 6061-T6 alloy • Receiver and Bottom Metal Finish:  Hard Black Anodizing • Bolt Carrier Material:  HTSR 4140 steel • Bolt Carrier Finish:  QPQ Black Nitride • Muzzle Device: Threaded Muzzle Protector • Trigger: Mil-Spec Trigger Assembly • Furniture: • A2 polymer grip • Canuck 6-Position sliding buttstock • Weight: (Without Magazine) • 19" Barrel: 6lbs 12 oz • Overall Length Fully Assembled: (Collapsed Stock) • 19" Barrel: 34.75" $1700

categories:Sporting GoodsGuns

8144 impressions

1051 views

Please text anytime 6476871484. Fully functional double action revolver in perfect ready to shoot condition. No PAL required. Test fired with smokeless powder. Comes with FRT paperwork. Reloadable ammo is available but sold separately. Colt M1892 "New Army" Revolver has significant improvements over M1889 with better locking and indexing mechanism. This one is in excellent condition. The nitro blue on the trigger and hammer is well visible and retains 95% of original blued finish. The action is strong and accurate, and the cylinder indexes and locks properly very little play on trigger pull. The bore of the 4 1/2 inch barrel is good and bright with strong rifling. The markings are sharp and defined throughout. The assembly numbers on the cylinder, crane and frame. The original grips are good and undamaged.​​ S/N 71799 History & Background This model is an important milestone in Colt handgun development, as it is the first American revolver with a swing-out cylinder mounted on a crane, a development which would become the standard for modern revolvers to this day. The 1889 cylinder mechanism was already "on the books" as early as 1880, based on designs of Colt engineers William Mason, C.J Ehbets and Horace Lord. It would take almost ten years for Colt executives to give the green light to manufacture this gun, and once it was available, the US government quickly took notice and ordered several thousand for the Navy. Colt adopted the name "New Navy" in honor of this order. The gun has an interesting counter-clockwise cylinder rotation and a locking mechanism which relies entirely on the two-pronged hand. The 1889 model would remain in production for 18 years, with significant improvements in 1892, 94, 95, 96, 1901 and 1903. When it was first introduced in 1889, it met with no competition from the other major makers - Smith & Wesson were still heavily engaged in manufacturing top-break revolvers, and Remington only had their solid frame revolvers with removable cylinders to offer. It would take S&W another ten years before they had a viable alternative to Colt's design.

categories:Sporting GoodsGuns

27361 impressions

1806 views

This is a VZ24 Czech 8mm mauser with the “E lion” crest The receiver has formed a patina finish to it but the crest is deep and all details of the lion is clear. It is a non matching full furniture rifle. Top hand Gaurd is cracked the bands hold it together. Light/normal wear/scratches on stock wood and metal has not been refinished. Front sight is missing the VZ sight Gaurd a common part missing and not to hard to source, front sight is correct with the sight gaurd channel so the fix is easy as sourcing the part and sliding it in the channel. History: sourcing is a bit hard as many documents were lost/destroyed or not maintained during and post WWII. Some information I Did find on the E lion crest was some can be as old as 1935 but most with records dated and started to show up in 1936 they started to disappear in 1939 and many receivers with the Czech lion were required to be scrubbed after Germany absorbed Czechoslovakia during WWII.

categories:Sporting GoodsGuns

21462 impressions

876 views

Seven factory boxes × 20 cartridges = 140 rounds of Remington Core-LokT Polymer-Tip .30-06 Springfield, 150 grain (boxed, new/unfired). I’m also including approximately 19 extra rounds free — a mixed handful of Browning BXR Rapid Expansion 155 gr and additional Remington Core-LokT 150 gr rounds. That brings the pack to ~159 rounds total included.

categories:Sporting GoodsGuns

10379 impressions

572 views