This is a sub moa rifle with trigger tec,Harris bipod, cadex chassis, ai clip 12 round,us optic angle finder,us optics level,night force attacker 5x25 x56 34mm tube,atc rings spent almost ten grand building and pelican case

categories:GunsSporting Goods

6981 impressions

609 views

Harrington Richard's singleshot 270 winchester for sale comes with adjustable bipod 3×9×40 scope

categories:GunsSporting Goods

2401 impressions

434 views

This is a prestine Model14 American Classis in 243 cal. Not a mark on the stock ( no scratches, dings, divots) barrel has slight rub mark towards top of it that’s it. Comes with what you see, whole package. Gun, scope( Tasco World Class 6-18x50 with adjustable objective end), bipod ( 12-24in.), and strap. It’s a tack driver, bullets touching at 100yds. With my reloads. These American Classics are hard to find

categories:GunsSporting Goods

4265 impressions

416 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:GunsSporting Goods

2443 impressions

357 views

Brand new The Magpul Bipod for M-LOK offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”. An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Guns

3931 impressions

441 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:GunsSporting Goods

2474 impressions

419 views

Savage modal 10 308 win Jc 26” heavy barrel contour with his muzzle break Vortex venom 5-25x56 vortex precision rings Murphy precision stainless steel 20moa rail glades armoury large bolt handle mdt xrs chassis 12 round mdt metal mag mdt grnd pod bipod Hunt shield waterproof foam cutout case Only 40 rounds through it will shoot 1/4 inch at 100 yards with hornady factory match (please call or text and we can negotiate a price)

categories:GunsSporting Goods

4348 impressions

591 views

Brand New Mark II FVXP in 22LR, with factory installed scope. 40 rounds down the flute just to sight it in. Bought for my wife in hopes that she would finally enjoy the sport as much as me. Not a chance lol. I have other 22s, so this one is going back out the door. $400 shipped, and will include accessories as pictured: bipod, scope caps, chamber flag, magazine, trigger lock.

categories:Guns

2139 impressions

293 views

Browning A bolt 3 in 308 calibre composite stalker 1 magazine 3-9x40 redfield scope on teller mounts And bipod (prefer phone contact)

categories:Guns

5873 impressions

583 views

Tikka t1x 17 hmr. Vortex 3.5x10x50 diamondback scope and rings, Tikka gun case, Extra clip, 5.5 boxes of CCI bullets, Caldwell bipod plus gun bag thingie..... All excellent condition everything you see in pic. Over 1700$ retail plus taxes Asking 1000$ to fund a new scope for my rifle.... (NO SHIPPING)

categories:GunsSporting Goods

16591 impressions

1667 views

It’s in good shape it’s the lmg model but no longer have the bipod and club foot stock just a sigmaco at stock adapter and stock on it spare parts and 3 magazines 2 regular and 1 drum and if local some ammo if wanted in a trade also yes trades prefer 223/556 or other 7.62x39 or 51 rifles

categories:GunsSporting Goods

6847 impressions

667 views

Sniper comes with bipod and cheek pad 1 mag about 100 rounds ran through it. GSG comes with two 22 round mags and 110 drum mag about 500 rounds through it . Willing to trade more looking for a shotgun but send what you got i'll let you know if i'm interested and will sell individually 450 for Savage 500 for GSG. Must have PAL

categories:Guns

4064 impressions

238 views

Norinco Type 81 7.62x39 comes as seen 2 magazines,bipod,stored well always cleaned. 1350$

categories:Guns

4107 impressions

322 views