Brand new Non-restricted Caliber: 357 MAG/.38 Special Capacity: 7 Rounds Action: Lever Action Safety: Transfer Bar Receiver Finish: Blued Steel Barrel: 17.4" Round Blued Steel Front Sight: Fiber Optic Rear Sight: Fully Adj. Fiber Optic Scopeability: Drilled and Tapped Scope Mount Type: BB-RSM Stock Material: Black Synthetic Buttplate: Black Solid Rubber Recoil Pad Length of Pull: 14" Rate of Twist: 1:16 Overall Length: 36.3" Weight: 7.3 lbs Made in USA

categories:GunsSporting Goods

676 impressions

53 views

Please text anytime 6476871484. Fully functional antique revolver in mechanically perfect and ready to shoot condition ,very good action, no PAL needed. Reloadable ammo is available but sold separately Comes with FRT RCMP paperwork. Smith & Wesson 44 New Model No. 3 Top Break, .44 Special / Russian Revolver. This one is in very good condition with longer 1 9/16 cylinder and can shoot both .44 Special and 44 Russian ammo. The action is strong and accurate, and the cylinder indexes and locks properly. The bore of the 6.5-inch barrel is quite good, with strong rifling. The black hard rubber grips are good and undamaged. Mechanically in excellent condition with proper timing and lockup. The latch is also solid with zero play. Extractor works as it should. SN 10438, very good overall. History & Background Smith and Wesson's first double action design dates back to at least 1872 - years before Colt ever attempted a double action cartridge revolver. It was mentioned in a letter to the Russian envoy General Orlof, and although the sale to Russia never materialized, it served to pave the way for the very popular and successful line of double action top break revolvers. The .44 Russian model was actually the first to be produced as a prototype, and the last to be released for sale to the public. For this reason there exists a degree of confusion over the proper terminology: the first one to be manufactured for sale was the .38 caliber model, followed by the .32. The .44 caliber model was not released until 1881, and is variably known as the No. 3 Double Action, the Double Action "Navy" (a name Daniel Wesson wanted to keep alive to differentiate this model from the No. 3 single action, and still holding out hope to sell it to the Russian navy), and the First Model Double Action. Originally, the .44 Double Action was made with a 1 7/16 inch cylinder, however an optional .44-40 version was available as of 1886. This required a 1 9/16 inch cylinder, and a longer frame. The firm soon realized that it was too expensive and cumbersome to manufacture two different sizes of frames for what was essentially the same gun, and the shorter cylinder and frame were dropped in favour of the longer one in the early 1890's. The No. 3 frame .44 double action top breaks were dropped from the Smith and Wesson catalogue in 1913.

categories:GunsSporting Goods

845 impressions

414 views

anyone need .38 special casings i have way too many would like to trade for other casings nw calgary i could use 357 casings or 7.62x39 open to other offers

categories:GunsSporting Goods

6984 impressions

189 views

Howdy Townpost! I've got a nice little uncommon and good condition subcompact Remington for sale now! This started its life as a Remington Model 1865 New Model Police as a cap and ball percussion revolver in .36 caliber. Many of these were never percussion guns as they existed in a weird transition period. And Remington made some of them from the ground up as cartridge guns. This one most likely was in inventory as a percussion revolver and was turned into a .38 rimfire cartridge revolver based on the serial number, in my opinion. These are one of the more rare and lesser known Remington cap and ball guns that were made. Remington only made 18,000 between 1865 and 1873. So they are relatively uncommon and scarce gun today. This is actually my personal favorite model of Remington percussion revolver they're a very handy subcompact-sized gun by today's standards they're bigger and much more comfortable in the hand in the grip than the pocket models but nice and light unlike the full size military .44s and they point very naturally. This particular example is in very good condition the nickel is a very high percentage of coverage some of the original silver plate is still visible on the trigger guard and some of the low areas. The color case hardening is still very colorful and defined on the hammer (pictured). The grips have been refinished but they are the originals. The wood grain is very interesting and beautiful in my opinion. The bore is in excellent condition especially for a Civil War era black powder firearm. This was likely carried in a police officer's holster and not fired much. It was well taken care of and the clean and good condition bore and chambres are reflection of that. The the mechanical function of this firearm is excellent as well. When I got the firearm it was actually in amazing condition to begin with and the mechanical function was perfect. It locks up and times perfectly. The hammer and the trigger pull are very crisp, light and smooth. And didn't require any adjustment, Remington did the job and they did it right the first time. The entire revolver has been taken apart and given a gunsmith's cleaning and was reassembled and lightly oiled. I came across a nice little Hunter leather holster at a gun show and found that it fit this gun very well so it's included as a freebie with the gun (pictured). The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

5543 impressions

385 views

Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.

categories:GunsSporting Goods

11644 impressions

520 views

459 brass and 2053 nickel .38 Special fired casings (mixed headstamps) Local pick up only. Text or call only.

categories:GunsSporting Goods

28441 impressions

832 views

Please text anytime 6476871484. Fully functional antique revolver in mechanically perfect and ready to shoot condition ,very good action, no PAL needed. Reloadable ammo is available but sold separately Comes with FRT RCMP paperwork. Smith & Wesson 44New Model No. 3 Top Break, .44 Russian Revolver This one is in very good condition. The the serial numbers match . The action is strong and accurate, and the cylinder indexes and locks properly. The bore of the 6-inch barrel is quite good, with strong rifling. The black hard rubber grips are good and undamaged. Mechanically in excellent condition with proper timing and lockup. The latch is also solid with zero play. Extractor works as it should. SN 5819, very good overall. History & Background Smith and Wesson's first double action design dates back to at least 1872 - years before Colt ever attempted a double action cartridge revolver. It was mentioned in a letter to the Russian envoy General Orlof, and although the sale to Russia never materialized, it served to pave the way for the very popular and successful line of double action top break revolvers. The .44 Russian model was actually the first to be produced as a prototype, and the last to be released for sale to the public. For this reason there exists a degree of confusion over the proper terminology: the first one to be manufactured for sale was the .38 caliber model, followed by the .32. The .44 caliber model was not released until 1881, and is variably known as the No. 3 Double Action, the Double Action "Navy" (a name Daniel Wesson wanted to keep alive to differentiate this model from the No. 3 single action, and still holding out hope to sell it to the Russian navy), and the First Model Double Action. Originally, the .44 Double Action was made with a 1 7/16 inch cylinder, however an optional .44-40 version was available as of 1886. This required a 1 9/16 inch cylinder, and a longer frame. The firm soon realized that it was too expensive and cumbersome to manufacture two different sizes of frames for what was essentially the same gun, and the shorter cylinder and frame were dropped in favour of the longer one in the early 1890's. The No. 3 frame .44 double action top breaks were dropped from the Smith and Wesson catalogue in 1913.

categories:GunsSporting Goods

5472 impressions

238 views

Please text anytime 6476871484. Fully functional revolver in perfect ready to shoot condition. No PAL required. Reloadable ammo is available and sold separately. Hopkins & Allen "XL No. 4", .38 RF Pocket Revolver The markings are sharp and the numbers match on the frame, barrel and cylinder. The action is strong and tight, and the cylinder indexes and locks properly. The bore of the 2 1/2 inch barrel is very good, with strong rifling. The rosewood grips are excellent and undamaged, with varnish intact. SN 289, very good overall. History & Background One of the most prolific makers in America was the firm of Hopkins & Allen. Founded in 1868 by the principals Charles Converse, Charles and Samuel Hopkins, and Charles Allen, the firm assumed the assets of the Bacon Manufacturing Company. H&A used Bacon's machinery and inventory of parts, and continued at first to make Bacon's various models before switching to cartridge revolvers and later rifles and shot guns. H&A was in business until 1915, and claimed to be the "largest manufacturers of high-grade, popular priced firearms in the world". Hopkins & Allen were well known for their pocket revolvers and Merwin & Hulbert branded large-frame revolvers. H&A are generally of a better quality and workmanship than other suicide specials.

categories:GunsSporting Goods

3945 impressions

367 views

Please text anytime 6476871484. Fully functional antique revolver in mechanically perfect and ready to shoot condition ,very smooth action no PAL needed. Reloadable ammo is available but sold separately' Comes with FRT RCMP paperwork. Smith & Wesson 44New Model No. 3 Top Break, .44 Russian Revolver This one is in very good condition. The the serial numbers match . The action is strong and accurate, and the cylinder indexes and locks properly. The bore of the 6-inch barrel is quite good, with strong rifling. The black hard rubber grips are good and undamaged. Mechanically in excellent condition with proper timing and lockup. The latch is also solid with zero play. Extractor works as it should. The .44 Russian round was known for its incredible accuracy and when combined with the fast reload time of the top break auto ejection system that Smith & Wesson designed it made their revolvers far superior to anything else on the market. SN 26203.​ ​​ History & Background Smith and Wesson's first double action design dates back to at least 1872 - years before Colt ever attempted a double action cartridge revolver. It was mentioned in a letter to the Russian envoy General Orlof, and although the sale to Russia never materialized, it served to pave the way for the very popular and successful line of double action top break revolvers. The .44 Russian model was actually the first to be produced as a prototype, and the last to be released for sale to the public. For this reason there exists a degree of confusion over the proper terminology: the first one to be manufactured for sale was the .38 caliber model, followed by the .32. The .44 caliber model was not released until 1881, and is variably known as the No. 3 Double Action, the Double Action "Navy" (a name Daniel Wesson wanted to keep alive to differentiate this model from the No. 3 single action, and still holding out hope to sell it to the Russian navy), and the First Model Double Action. Originally, the .44 Double Action was made with a 1 7/16 inch cylinder, however an optional .44-40 version was available as of 1886. This required a 1 9/16 inch cylinder, and a longer frame. The firm soon realized that it was too expensive and cumbersome to manufacture two different sizes of frames for what was essentially the same gun, and the shorter cylinder and frame were dropped in favour of the longer one in the early 1890's. The No. 3 frame .44 double action top breaks were dropped from the Smith and Wesson catalogue in 1913.

categories:GunsSporting Goods

21362 impressions

1228 views

Please text anytime 6476871484. Fully functional double action revolver in perfect condition. Compact pocket revolver high quality and can fit in the palm of your hand.. No PAL required. Comes with FRT paperwork. Reloadable ammo is available but sold separately. Iver Johnson "American Bull Dog", .38 RF short and long Revolver Iver Johnson was one of the most prolific makers of pocket revolvers in America, from 1871 to nearly the present. One of the earliest makers of bulldog-type, double action revolvers, the Iver Johnson American Bull Dog is well known and in demand. These were made by Johnson's and the relief grip showing the American eagle on a shield is typical of Johnson's ware. ​ This one is in very fine to excellent condition, with 99% original nickel. The action is accurate and strong, and the cylinder indexes and locks properly with no play. The bore of the 2 1/2-inch barrel is good with strong rifling throughout. The black hard-rubber grips are excellent and undamaged. SN 2407, excellent overall. History & Background Iver Johnson (1841-1895) was a Norwegian gunsmith who came from Bergen to America in 1863. He found work immediately at Ethan Allen's factory in Worcester, Mass. where he met Martin Bye. Johnson worked at Allen's through the civil war years, as demand for firearms was high, and work was plentiful. By 1871 Johnson and Bye had decided to venture out on their own and founded Johnson Bye & Co. in Worcester, moving to Fitchburg by 1891. In 1883 Martin Bye left the company, selling his interest to Iver. The company name was changed to its most famous form, "Iver Johnson's Arms & Cycle Works, Fitchburg, Mass.", a name it would retain until the outbreak of the First World War. Iver Johnson did not only produce a large variety of firearms, they were also famous for their excellent quality bicycles and motorcycles. The company would remain in business until 1993. The name was "revived" in 2006 and the brand is still used today.

categories:GunsSporting Goods

4977 impressions

290 views

Description New in box Unleash the power of tradition with the Marlin 70432 1894 SBL, a modern take on a classic lever-action design, perfect for Canadian hunters, sport shooters, and collectors. Chambered in .44 Magnum, this rifle combines rugged performance with exceptional craftsmanship, making it an ideal companion in the field or on the range. The Marlin 1894 SBL is designed to meet the needs of Canadian firearms enthusiasts who value quality, versatility, and performance. Its .44 Magnum chambering offers outstanding stopping power, while its rugged construction ensures reliability in tough Canadian conditions. Features Stainless Steel Barrel and Receiver Durable Grey Laminate Stock Large Loop Lever XS Lever Rail w/ Ghost Ring Sights 8+1 Round Capacity 16.1″ Barrel Length Specifications Model# 70432 44 Rem Mag / 44 Special Chambering Grey Laminate Stock Stainless Steel Material Polish Stainless Finish Fiber Optic Front Sight w/ Tritium Rim Adjustable Ghost Ring Rear Sight 6.3 lbs. Overall Weight 33.25″ Overall Length 13.38″ LOP 16.1″ Barrel Length 5/8-24 Threaded Barrel Match-Polished Thread Cap Cold Hammer-Forged Stainless Steel Barrel 1:20″ RH Twist, 6 Grooves

categories:GunsSporting Goods

56815 impressions

2204 views

Selling .38 rimfire ammunition from estate sale. Cartidges were stored in case, bullet facing down. 5 for $16 or buy all 55 pieces as a lot for $175 OBO Will Ship

categories:GunsSporting Goods

11277 impressions

792 views

For Sale - Lee Precision 38-40 WCF steel full length sizing 3 die set - no crimp die included $90 - firm Brand new in box - Contains: -full length sizing die -expanding die -bullet seating die -powder scoop -shell holder -data, load chart, and instructions -handy red box The resizing die is steel and is not self lubricating. I also have a 38-40 WCF crimp die for sale if your interested as well. A nice die set for an old western caliber. EMT (shipped) or cash (pickup) - Remote pick up available by appointment only, house drop box or shipped at buyers expense via Canada Post within Canada only. Small package/tracked to all provinces - $22 (small box) Text, email, or leave message / unable to answer calls in remote areas. No trades or offers If this ad is still up then item is available.

categories:GunsSporting Goods

12530 impressions

508 views

Caliber: .38 Spl. Weight: 158gr Bullet Style: LRN Casing: Brass Muzzle Velocity: 770 fps Muzzle Energy: 208 ft. lbs. Part #: AE38B Rounds: 50 Rounds per Box Made in USA

categories:GunsSporting Goods

2284 impressions

175 views

Brand new Non-Restricted Lever action Caliber: .44 MAG Capacity: 9 Stock: Black Laminate Receiver Material: Alloy Steel Receiver Finish: Matte Blued Front Sight: Brass Bead with Hood Rear Sight: Adjustable Semi-Buckhorn Barrel Length: 20.25" Thread Cap: Match-Polished Barrel Material: Cold Hammer-Forged Alloy Steel Barrel Finish: Matte Blued Twist Rate: 1:16" RH Grooves: 6 Weight: 6.2 lbs. Overall Length: 37.5" Length of Pull: 13.38" Made in USA

categories:GunsSporting Goods

5930 impressions

348 views

Brand new Non-restricted Caliber: 357 MAG/.38 Special Capacity: 10+1 Barrel Length: 20″ Safety: Manual Safety OAL: 37.5″ Weight: 7 lbs Stock: American Walnut, Checkered Straight Grip Receiver: Blue, Drilled & Tapped Sights: Ft:Beaded Rr:Adjustable Semi-Buckhorn w/ Diamond Made in USA

categories:GunsSporting Goods

17665 impressions

1451 views

Caliber: 38-55 WIN Weight: 240 gr Bullet Style: Round Nose Casing: Brass Muzzle Velocity: 1500 fps Muzzle Energy: 1199 ft/lbs  Rounds Per Box: 20 Made in USA

categories:GunsSporting Goods

1395 impressions

88 views

shipping in prepaid boxes either $20 or $23 depending on size of order. some orders can go in a non-trackable padded envelope for about $7.50 for under 500grams. NOW, for a short time, order 300 bullets and shipping is $10 Selling bullets for reloading .41 rimfire. Bullets weigh 150 grains RNFP. These fit the HC reloadable brass. Please note, that only the projectiles are for sale, brass is not included. 32 rimfire bullets will fit colt 32 brass. email for more info on these bullets (same pricing) 38 rimfire bullets will fit 38spl brass email for more info on these bullets (same pricing) $12 for 30 bullets, $20 for 60. shipping is as per canada post rate for your location (usually around $18-20 ) also have 8mm lebel, 38 S&W, 455 webley, 44-40, 45-70, snider. let me know what you are looking for and I will see if I have that caliber, if i don't have it can likely get a mold and start making it. can do wheel weight (hard lead) or soft lead Webley 265 grains using pure lead, about 257 grains using WW dropping at .455 455 Webley RN HB $73/200 plus shipping ($2 extra for alox lube) I usually make these 50/50 soft lead and wheel weight for about a 10BHN NEW snider bullet .600 530Gr as shown in picture NEW X-ring 470-475XR Martini-henry mold in picture 500 S&W magnum various weights 700Gr T-rex bullet + others, ask. lots of black powder rifle Minie and R.E,A.L bullets. various sizes of round balls for pistols and rifles. PRICES -- .390 and under $30/100 .433 up to .600 $40/100 .678 up $45/100 26 different round ball molds, if you don't see your size email. over 80 different molds in total, if you don't see it just ask. .311 RB .315 RB .319 RB .323 RB .350 RB .375 RB .380 RB .390 RB .433 RB .435 RB .440 RB .451 RB .454RB .490 RB .495 .530 .575 RB .58 RB .600 .678 .690 RB (12Ga) please txt or email only. ****Email for complete list of bullets

categories:GunsSporting Goods

67731 impressions

4995 views

I have .38 cal in 125 gr. LRN And 150 gr. LRN And I have .45 in 200 gr.LRN. Price is .38 /125.gr.$100.00 a1000. .38/ 150gr. $125.00 a 1000 and -45 /200 gr. $130.00 a 1000

categories:GunsSporting Goods

1034 impressions

87 views

Brand new Non-restricted Caliber: 357 MAG/.38 Special Capacity: 7 Rounds Action: Lever Action Safety: Transfer Bar Receiver Finish: Blued Steel Barrel: 17.4" Round Blued Steel Front Sight: Fiber Optic Rear Sight: Fully Adj. Fiber Optic Scopeability: Drilled and Tapped Scope Mount Type: BB-RSM Stock Material: Black Synthetic Buttplate: Black Solid Rubber Recoil Pad Length of Pull: 14" Rate of Twist: 1:16 Overall Length: 36.3" Weight: 7.3 lbs Made in USA

categories:GunsSporting Goods

7665 impressions

435 views

Beautiful looking rifle, never fired. Rossi R92 357 Magnum Sniper Gray Cerakote Lever Action Rifle - 16.5in. PAL Required, prefer local sale. The Rossi R92 is a well-known and reliable lever action rifle that is also affordable. The R92 Triple Black model builds on this reputation by adding some modern touches to the classic design. It is chambered in .357 Magnum and can also fire .38 Special, making it a versatile option. The wooden stock and forend are coated in a durable all-weather black-on-black splatter paint finish to protect them from the elements, while the rest of the firearm features a sniper gray Cerakote finish that adds to its toughness and durability. The Triple Black model also features a threaded barrel and Picatinny scope base, which are exciting additions. The threaded barrel allows for the attachment of a suppressor or muzzle brake, while the Picatinny rail provides the option of adding a scope or red dot sight. This makes the R92 Triple Black a great choice for anyone looking for a tactical cowboy rifle that combines the best of both old and new.

categories:GunsSporting Goods

2258 impressions

267 views