NOT for SALE - LILJA Warranty reference only. MAY 7, 2024 - Fifth anniversary. News Update; By acquiring a quality bore scope, I was able to see the problem with barrel. The rifling lands in front of the chamber had separated from barrel for about 1.25" and 1 land was protruding into bore. Cut off 2" of barrel chamber end. Machined new barrel end to fit receiver tighter by .002" and rechambered for 22 short only. At range gun shot 1/4" - 5 shot group at 50 yds. shooting CCI 22 short - 27 gr. HP. Seems the rifling is not shot out but can not understand rifling land separation. UNIQUE -- NO WARRANTY or REFUND from LILJA. Call phone or e-mail only. No messages. Aug. 27/24: Over the past 3 years I just added 3817 rds. of CCI 22 shorts to round count. Still shooting 1/4" groups at 50 yds.

categories:Sporting GoodsGuns

227152 impressions

18193 views

01.Benelli M1/M2/Super 90 20 GA, 24 inch Fully Rifled Barrel, Realtree Advantage Timber HD camo pattern with Rifled sights-$850.00 02.Benelli M1/M2/Super 90 12 Gauge Matte 24" Rifled Slug Barrel,with Rifled sights.-$750.00 03.Benelli M1/M2/Super 90 "E.R Shaw Custom" 12 Gauge Matte 24" Rifled Slug Barrel,with Rifled sights.-$700.00 04.Benelli M1/M2/Super 90 12GA. Camo MAX-5 24" Fully rifled Crio barrel with sights. Rear sight adjustable.-$750.00 05.Benelli SBE 1 or 2 (Super Black Eagle) 12 GA. 24 inch fully rifled Crio barrel with sights. Rear sight adjustable. Black.-$850.00 06.Beretta Vitoria Pintail (ES100) 28 inch barrel, 3 inch chamber, threaded for screw in Beretta Mobile chokes.-$550.00 07.Browning Maxus 12 GA. 22" Fully Barrel with Cantilever. Black, Matte.-$580.00 08.Beretta 680 series O/U 32" ,2 3/4",12 gauge unsingle Trap barrel with HI vent rib (Beretta mobile chokes).-$1500.00 09.Beretta 680 series O/U 34" Fixed Full,ported,2 3/4",12 gauge unsingle Trap barrel with HI vent rib.-$1500.00 10.Beretta DT-10 (DT11) 12ga.34” ventilated rib Mono Top XTrap Optima Bore barrel with a bright excellent bore.-$2500.00 11.Mossberg 500 Max 5 camo 24"/12GA/3" Fully Rifled Cantilever Barrel. Brand new.-$300.00 12.Mossberg 500 Max 5 camo 24"/12GA/3" Rifled Turkey Barrel wit X-Full choke.-$275.00 13.Hatsan Escort pump Camo 12 GA 22-inch,3″ slug/turkey Fixed CYl choke cantilever smooth bore barrel(not a rifled)-$150.00 Brand New. 14.Hatsan Escort Semi Auto Camo 12 GA 24-inch vent rib,3″ slug/turkey smooth bore barrel with screw in chokes(not a rifled)-$150.00 15.Zastawa 22 WMR barrel with sights removed-$100.00 16.Marlin-30″ round 12 GA fixed Mod.choke-$60.00 (Model 1898 made in the period 1898-1905). 17.Remington 1100 26″ Simmons vent rib, 28 ga fixed choke skeet barrel. Convert your Remington 1100 12 gauge to 28 gauge.-$250.00 18.Beretta Model 425 12 GA Side by Side.30" barrels choked Mod/Full-$1200.00 Valid Pal a Must and will be verified for reference number. Local is preferred, but will ship at buyers expense.Further Lost insurance can be purchased by the buyer. Sold as is, no returns.ALL SALES FINAL. Please send message to: medal1958@gmail.com

categories:Sporting GoodsGuns

165113 impressions

9835 views

Brand new Partial Length Picatinny/ACOG rail, 3 inches long and sits at the back part of the dust cover for a rear bias. It is the perfect length for red dot or holographic sights. It weighs 5 ounces/141g. The AK Master Mount™ patented optic mounts are unique and purpose built products for serious users. They are built as rugged as the rifle itself. It's low profile with a low axis over bore. It also has a unique quick release "Dual Axis Locking" lever and a “2 in 1” top rail design that can accommodate picatinny or ACOG based optics. Made in the USA. Dual-Axis Locking AK optic mounts secure to an AK receiver’s side rail by one of two main methods. The first method uses a rotating lever that has a contoured portion to rotate and lock into a corresponding cut-out in the side rail. Many of the traditional com-bloc optic mounts utilized this design and are broadly referred to as SVD styled mounts. This method is primarily securing the optic mount in the horizontal axis. The second method utilizes a rotating lever to deform the bottom part of the mount to “crimp” onto the side rail. These mounts are not really quick release despite their labeling as such, and this mount deformation makes it difficult to resize the mount to a different side rail on a different rifle. The more modern approach to this method is to use the rotating lever to manipulate a spring loaded clamping bar to compress against the receiver’s side rail to make it quick release capable. These style mounts are prone to “walking” along the side rail with heavy shooting sessions as they only secure the optic mount in the vertical axis. These two techniques have been combined in a patented design to firmly secure our optic mount to an AK’s side rail in both the vertical and horizontal axis to make it Dual Axis Locking. This secure attachment maintains optics zero even with sustained heavy shooting sessions. The clamping bar is also longer than the other optics mounts on the market to provide additional clamping surface contact, and two springs are used in the clamping bar mechanism for increased clamping bar stability and true quick release capability. Low Axis Over Bore The optic mount's low profile hugs the side of the AK receiver and the dust cover to deliver a low axis over bore placement. This allows simultaneous use of the rifle's iron sights if needed. The 12 sided proprietary locking bolt provides for a greater clamping bar tension range, twice that of most optic mounts on the market. This allows for true fine tuning of the clamping bar’s clamping force, and it also ensures proper fitting on side rails of slightly different dimensions on different rifles. Optics zero is maintained. Built Rugged As the AK Itself The optic mounts are machined from a solid block of 6061-T6 aluminum to achieve superior strength, but yet be weight conscious. Its one piece design keeps things simple, maintains structural integrity, and avoids fastener failures or movement that can occur in two piece optic mounts. Likewise the optic mounts were intentionally overbuilt with heavy duty struts to reliably support its integral 2-in-1Picatinny / ACOG rail and any attached optics. Its robust struts then pleasantly blend into the body of the mount which is also rugged enough to withstand whatever abuses are thrown at it. Despite the mounts ruggedness, the edges been rounded and contoured to make it egronomic, snag free and good looking. No wimpy levers here. The throw lever is also heavy duty and is fully inset into the body of the mount to protect it from any snags and accidental release. Accessory Side Rail Built into the struts supporting the top rail are cut-outs that allow for the use of optional Accessory Side Rails. These offset rails allow for use of additional sighting solutions and accessories. Compatibility The AK Master Mount™ AKM version optic mounts are specifically designed for the standard pattern AK side rail. The MasterMount T81 Side Rail was specifically designed to provide ideal positioning, cheek weld and ergonomics when used with a Type 81 rifle. Not compatible with Underfolder. Greater Optics Versatility. Superior Finish. A unique feature of the optic mount is the proprietary rail on the top. The standard picatinny rail pattern has been combined with the ACOG base pattern into one combined rail section. This “2-in-1” rail design allows for more versatility in optics choice by not having to buy two different optic mounts, or an adapter, to accommodate optics with a picatinny base or an ACOG base. The patented AK Master Mount™ optic mount build is made with 6061-T6 alloy completed with a black hardcoat (type III) anodized finish that not only looks great, but adds additional structural strength and wear resistance.

categories:Sporting GoodsGuns

6316 impressions

620 views

Please text anytime 6476871484. Fully functional antique revolver in ready to shoot condition ,very smooth action. No PAL needed. Can shoot 32rf long and short. Comes with FRT RCMP paperwork. Smith and Wesson No. 2 "Old Model Army", .32 RF Revolver This one is in very good condition. With original blue. The action is strong and accurate, and the cylinder indexes and locks properly without play. The bore of the 5-inch barrel is very good, with sharp rifling and mirror bright. The rosewood grips are very good and undamaged. They look like they may have been re-varnished once. SN 59474, very good overall. History & Background Horace Smith and Daniel Baird Wesson acquired Rollin White’s patent (1855) for the bored-through cylinder to manufacture what they originally called the No. 1 revolver in .22 rim fire. It proved to be a rather ineffective little pocket revolver but was nonetheless very popular with civilians as a personal protective weapon. In 1861, just as the civil war gained momentum, S&W decided that they needed a larger caliber revolver in order to be able to convince the buying public (many of them enlisted in the war) that their gun was a viable protective option and as a back-up gun in battle. The scaled-up design was duly named the No. 2 and was nicknamed the “Army”, as it was widely used by military personnel as a personal side arm. Smith & Wesson retained and defended the Rollin White patent aggressively throughout the civil war period, and until its expiry in 1870, and therefore the No. 2 “Army” would be the only American made cartridge revolver used during this conflict (although several “unlicensed” makers added their wares into the fray, such as Uhlinger, Pond and Moore). The model is called “Old Model” due to its frame shape – the square butt and octagonal barrel of the model 1 ½ First Issue, as compared to the bird’s head grip and round barrel of the Second Issue. There is no “New Model” Army. The "No. 2 Old Model" was a popular personal side arm of many officers in the Union forces during the American Civil War, and is also known as the "Army" model. It was first introduced in 1861, and made until about 1874. The "No. 2" refers to the frame size, "No. 1" having been the first, .22 caliber pocket revolver and the "No. 3"'s being the large-frame revolvers. The 1 1/2 was introduced after the number 2, and since it fits in between the no. 1 and no. 2, it was named the no. 1 1/2. The no. 2 was owned by such famous Americans as General George Armstrong Custer and "Wild Bill" Hickok, the marshal of Deadwood...

categories:Sporting GoodsGuns

22779 impressions

688 views

Please text anytime 6476871484. Antique revolver in ready to shoot like new excellent condition ,very smooth action. No PAL needed. Comes with FRT RCMP paperwork. Ammo is available but sold separately. This one is compact concealed carry version of famous Colt M1877 "Thunderer" was made for self defense and fast action. With "bulldog" type short barre and no regular extractor on the side this revolver made for concealed carry and optimised for fast action. The action is strong and crisp, and the cylinder indexes and locks properly, without any play in the cylinder. The bore of the 2 1/2-inch barrel is excellent mirror bright with strong rifling. The black hard rubber grips are very good and undamaged. SN 82458. ​ History & Background The M1877 was Colt's first double action revolver. Colt insisted on inventing their own double action mechanism, partly because there were numerous patents for DA revolvers in effect, which Colt did not want to infringe upon, but also because they trusted their chief engineers William Mason and C.B. Richards to come up with an original design. For this reason, the M1877's action is like a Swiss clock: it is somewhat convoluted and complicated, and it has earned the nickname "the gunsmith's favorite" over time. The gun did enjoy tremendous popularity however, and was manufactured for 32 years, even after Colt had improved the mechanism and simplified it considerably in later years. The M1877 was available in three calibers - .32, .38 and .41, and was originally called "Lightning". Later collectors coined the name "Rainmaker" for the .32 and "Thunderer" for the .41. In Canada, only the .41 caliber gun with serial numbers below 107,000 is considered an antique, as the others are either exempt calibers, or made after January 1, 1898.

categories:Sporting GoodsGuns

18181 impressions

1636 views

Selling/trading a few barrels. Prices include shipping. As follows: 1. Remington 700 24" .300 WSM barrel, matte finish, normal marks and dings, bore excellent - $125 2. Remington 700 22" .308 Win barrel, blued finish, normal marks and dings, bore excellent - $125 3. Winchester Model 70 Classic Stainless 24" .300 Win Mag barrel, dings and marks in the finish, bore excellent - $150 4. Winchester Model 70 aftermarket 23" .338 Win Mag barrel, dings and marks throughout, bore excellent - $150 5. Winchester Model 70 Classic Stainless 20" .375 H&H Mag barrel, magna ported, marks and dings, bore excellent - $150 As stated above, prices include shipping. Willing to work out a package deal for more than one barrel. Open to all trades. Pm or text/call 204 795 2850 for more info.

categories:Guns

22919 impressions

1577 views

Have 2 Winchester 94 Big Bore’s in 375win and 2 Chiappa 92’s one in 357mag and one in 44mag 1 Box of ammo for each gun included

categories:Sporting GoodsGuns

17897 impressions

2285 views

NEW, never fired, Winchester SXP Black Shadow Shotgun. Comes with 3 chokes. Gauge:  12 Chamber Length:  3" Barrel Length:  26" Overall Length:  46 1/2" Length of Pull:  13 3/4" Drop at Comb:  1 5/8" Drop at Heel:  2" Weight:  6 lbs 12 oz Magazine Capacity:  4, 2 3/4" shells Rib Width:  1/4" Barrel Finish:  Matte Stock Finish:  Satin Chokes Included:  Full, Modified, Improved Cylinder Receiver Finish:  Matte Dura Touch Finish:  No Chamber Finish:  Chrome Plated Chamber and Bore $400 shipped PAL required Can text or reply to ad Jason 204-799-6148

categories:Sporting GoodsGuns

12489 impressions

746 views

Please text anytime 6476871484. Fully functional antique revolver in ready to shoot like new condition. No PAL required. Comes with 2 moon clips for 45ACP, 1 adapter for .455 Webley and FRT RCMP paperwork. Webley MkI* British Service Revolver Navy .45ACP/45 Auto/ 455 Webley. The this one was checked and tested for smokeless powder by gunsmith. This one was professionally modified to accept 45auto rim and .45ACP cartridges on a moon clip and also can be used with original .455 Webley ammo. The gun is in like new condition with everything tight and working like a Swiss clock and plenty of the original blue remaining. The action is accurate strong and very smooth. The cylinder indexes and locks properly without play. The bore of the 4-inch barrel is good and mirror bright, with sharp rifling. The grips are excellent and undamaged. SN 30929, very fine overall. History & Background Philip Webley & Son began making top break, hinged revolvers as early as 1880, with the Charles Pryse patented design they acquired for use on their Webley-Pryse revolvers. Soon thereafter an improved locking mechanism by Michael Kaufmann produced the Webley-Kaufmann design, followed by Webley's own improved "Government" model, or "WG". It was not until 1887, when the British military hoped to replace the Enfield revolver that the first "Mark" revolver model was introduced. The Mk I was soon followed by the MkII (1894), then III (1897), and eventually as many as six variations were made, between 1887 and 1949. The Webley top break "Mark" revolvers were probably the single most widely used side arm in the world, and were still in service as late as the 1970’s.

categories:Sporting GoodsGuns

18453 impressions

3313 views

Selling/trading a few Dan Wesson Model 15 barrels and parts. The two prohibited barrels will require a valid 12(6) license to purchase, and the restricted barrels will require a valid restricted license. As follows: 1. 8" vent rib barrel, solid underlug w/ shroud. Bore very good. $495 shipped 2. 6" vent rib barrel, solid underlug w/ shroud. Bore very good. $495 shipped 3. 4" vent rib barrel, solid underlug w/ shroud. Bore very good. $495 shipped 4. 2" vent rib barrel, solid underlug w/ shroud. Bore very good. SOLD 5. 4x interchangeable front sights (2 white, 2 yellow). $45 each 6. Spring Kit #12 (assuming factory). $20 7. Wood grips, modified to fit a smaller hand. $50 8. Factory "Pistol Pack" case w/ correct yellow lined inside (no keys for locks). $195 shipped I'll be keeping one of the non restricted barrels, whichever one is left after the first one sells. Shipping included on the barrels and case, flat rate shipping of $18 on the sights, springs and grip. Open to selling the collection as a lot. Open to all trades. Can send more pictures upon request. Pm or text/call 204 795 2850 for more info.

categories:Sporting GoodsGuns

4584 impressions

689 views

Selling off extras, Earlier in the year I had made a 50Beowulf (12.7x42mm) rifle on the SrV2 Siberian platform, works Spectacular! and in doing so I also had 3 extra barrels made up at the same time to spread the love of the Big bore. these are more or less a "Complete" Calibre change for your AR type rifle, as the barrels include a 5rd Beowulf Mag w/ the proper follower. They are head spaced for a Grendel (Type 2) AR Bolt (7.62x39 AR bolts are "Type 1" and are NOT compatible) $500 for the (x1) 8" model  $525 for the (x2) 12.5" model they are all threaded 3/4x24tpi & .875" Gas block Diameter (Pistol for 8" and Carbine for 12.5") Gas port is NOT DRILLED (for use also in the PAR / SAR / MDI and other Non-Semi AR-type rifles) All it takes to be used in a Semi is to drill the Gas port (best to see a proper gunsmith about it) $75 for the Radial Door breacher As of Sept 1 I believe these will require the eyebawlz to look over a valid Pal, No pal or Unwilling to provide one will result in No Sale, Deposits are NON-Refundable & are valid for 14 days. Shipping is on the buyer. 

categories:Sporting GoodsGuns

8179 impressions

838 views

Hey there, Selling a JP Sauer (As in Sig Sauer) Side by side in 12 gauge. 2 3/4' Chamber. 28" barrels, both choked "Full". Refinished to a glossy burgundy. Euro 1" Sling mounts, so sling included. Great shape overall. Bores are great. No rust or missing parts. No cracks on the side in the wood, in the tang, or on the wrist. Only discloser is some retaining screws on the boxlock got re-tapped. Price is plus shipping, not interested in trades, thx.

categories:Sporting GoodsGuns

4730 impressions

396 views

PLEASE READ CAREFULLY: You must obtain a letter of exemption from the CFO of your province in order to buy a handgun in Canada as of October 21, 2022. - SMITH & WESSON Model 2206 /22 lr caliber has a solid stainless steel frame, ss slide and barrel - MINT CONDITION /like new in original box / A TRULY SUPERB TARGET PISTOL! - 6 inch /152mm long barrel with Target-Crowned Muzzle - The barrel is milled into the bottom of the pistol's frame, giving it an EXTREMELY low bore axis, thus, creating virtually no muzzle-rise with each shot fired - Very light, short and crisp trigger pull with adjustable over-travel set-screw behind the trigger - Barrel and front sight do not move when the slide reciprocates, making it very accurate with fast follow-up shots - Fully adjustable rear sight for windage and elevation with LONG sight radius, for better accuracy - 4 (10 rnd) steel, extremely reliable S&W magazines - Takedown tool, Rear sight adjustment S&W screwdriver - Spare extractor, springs and retainer pin (included) from the factory - Instruction Manual - Weight 39 oz /1106 g unloaded UPGRADES: 1- Trigger Job by Gunsmith to lighten the trigger pull 2- Professionally dehorned edges by Gunsmith (all sharp edges have been slightly rounded) 3- Modified 1/8 inch grip inserts (installed) to improve the overall grip and feel 4- Stainless steel allen head GRIP screws (lengthened & installed) 5- Grip tape (installed) Note: Serial Number has been blacked out in all photos

categories:Guns

36255 impressions

3714 views

Cooey 39 (winchester Canada) in great shape and works as it should. Nobel Model 200 is more of parts gun but works as it should. Bolt lever has been welded. See photos closely.  Rifling good on both.  Price is firm.   Please use cell phone text messaging." 403 556 0086 Courier Shipping, if needed,  at your cost. If you have a hunting firearm you would like to "trade in" and if you can drive to me, ( Innisfail, Alberta, just south of Reddeer) I will consider your in person (only, no exceptions please) trade ins . Please see my other ads. I have lots of rifles, shotguns, Scopes / ammunition / slings / cases etc available for extra. I can mount and bore sight for you too. PAL verification required. NO COD, cash or e transfer payment needed. Return customers / locals always given preference

categories:Sporting GoodsGuns

5592 impressions

404 views

Selling/trading a Winchester SX1 12 gauge. Overall it's in excellent shape. Comes as seen with 2 vent rib barrels, both 2 3/4" with fixed full chokes, one of the barrels has been reamed to modified. Has a set of Grade 2 Walnut furniture with custom checkering and a grip cap added. In excellent shape with no real notable imperfections. Bluing is excellent throughout. Bore shows no real wear, appears to have seen very little use throughout its life. A beautiful shotgun overall. Looking for $1350 shipped for the package. Looking for $1350 shipped. Insurance by request on buyer. Open to all trades. Can send more pictures upon request. Pm or text/call 204 795 2850 for more info.

categories:Sporting GoodsGuns

4478 impressions

448 views

Price breakdown Price for the unused rifle is $1700, including rifle+picatinny rail+rifle case and sling + shipping. Price for the scope is $1500, including scope with box and accessories+vortex precision rings + vortex lens covers + shipping. Price for the full set is $3000 including shipping. ---------------------------------------------------------------------------------------------------------------- 1. Tikka T3x .308 with heavy stainless steel barrel, brand new, never fired.       original price $ 1600 ex. tax 2. Vortex Viper HD 5-25x50 FFP MRAD, with original box and accessories, with vortex scope lens covers, first hand, lightly used. New-generation product, recently released, featuring a hunting-focused design with a capped windage turret and a locking elevation turret.  It is a successor to the PST gen 2 but this is more of a budget Razor LHT, which is a lightweight hunting optic. original price  $ 1500 ex. tax 3.  Vortex precision rings with spare screws included    original price $290 ex. tax 4. Talley Picatinny scope rail         original price  $70 ex. tax 5. Flambeau Express 48 Rifle Case and Rifle Sling    original price   $100 ex. tax 6. Bore Tech rifle cleaning rod   (not in the picture)   $100 with taxes and customs and shipping from US --------------------------------------------------------------------------- Total: $ 4100+ including tax NOW $ 3000 FULL SET including shipping. ------------------------------------------------------------------------------------- The scope is mounted on the rifle, but it hasn’t been zeroed. Never bring to the range. PAL must be verified. Can send more pictures upon request. Please message me here or via Email: kyle69025@gmail.com Lowball offer will be ignored.

categories:Sporting GoodsGuns

6398 impressions

781 views

HAD A STROKE AND MOVING CLOSE TO KIDS. 1980 BOXFORD MODEL 330 IS 13X40, 1/12 BORE, 3PHASE 220VOLT (PHASE CONVERTER INCLUDED) 2.5/1.75HP 2SP MOTOR,30-3000 RPM, ELECTROMAGNETIC BRAKE, CHANGE GEARS FOR 31/2-128 TPI (.2-7MM),TAPER ATTACHMENT, COOLANT PUMP, 4-JAW PRATT BURNERD CHUCK, 3 JAW PRATT BURNERD,6 TOOL HOLDERS DREHBLITZ 7.5 DEGREES ADJUSTMENT, 10'' FACEPLATE, STEADY REST,MISC TOOL ACCS. $45,000.00 #1 MILLING MACHINE,R8 SPINDLE, USED FOR MOSTLY FLUTEING BARRELS, 220-3400RPM, PULLEYS, 1''X 8"X 36'' ALUMINUM TABLE EXT., 20'' TABLE TRAVEL,SERVO POWER FEED,TILT HEAD 45 DEG., SWIVEL HEAD, $15,000. LARGE TOOL BOX WITH INSERTS, DRILL BITS & MISC.MEASURING INSTRUTMENTS. $3000.00. RIFLE BARREL CART WITH MISC TAKE OFFS, $1000.00 #2 MILL IS A CRAFTEX 601, 33 X 81/2 TABLE, CUSTOM STAND FOR COOLANT,DC VARIABLE SPEED, 50-2300RPM, 110VOLT- 12AMP, 4"HOLME VISE, 6'' DIVIDING HEAD, R8 SPINDLE, $8000.00. GUN RACK FOR STANDING GUNS, 2- 6'' GRINDERS'. WORK BENCH WITH VICE & BBL VICE, $3000.00. MISC. JIGS AND FIXTURES, DRILL PRESS WITH HEAVY STAND MADE WITH VICE AND 2 TON ARBOUR PRESS, $1000.00 BALDOR 10" BUFFER WITH STAND, POLISHING GRIT, WHEELS, $2000.00-4 BLUING TANKS WITH STAND AND SOME RUST BLUE, $1000.00 8"BANDSAW LIKE NEW, $750.00. BLASTING CABINET IS SILICONE SEALED FOR INDOOR USE, ALO GRIT, NEEDS A VACUM, $1000.00 3 MONTHS OF TRAINING WITH MACHINES(I HAVE LOTS OF WORK)$10.000 MONTH IF NEEDED.

categories:Sporting GoodsGuns

7206 impressions

537 views

Selling/trading a J.P. Sauer and Son single shot rifle in 7x57R. Overall it's in excellent shape. 26" half round half octagon barrel, with set trigger. Bluing is in excellent shape throughout with very few, if any notable imperfections. Wood stocks are also in excellent shape throughout. Scope mounting was done by world renowned gunsmith Martin Hagn. Comes with 2 scopes both with claw mounts - a Hensoldt Wetzlar Diasta-D 4x32 with #1 reticle and matching leather case as well as a Zeiss Diatel 6x42 T* with #4 reticle. Bore is in excellent shape as well. Comes topped with its original iron sights. Will also come with roughly 300 round of ammo. Overall a beautiful and very scarce rifle. Looking for $7595 shipped. Insurance by request on buyer. Open to all trades. Can send more pictures upon request. Pm or text/call 204 795 2850 for more info.

categories:Sporting GoodsGuns

4165 impressions

472 views

Selling/trading a few barrelled actions. These came in with a bulk deal, I do not know the history on them. as follows from top to bottom: 1. Swedish Nitro proofed action, Husqvarna 30-06 barrel. Bluing is in nice shape, shows normal marks and some sort of braze mark on the underside of the barrel. Bore is excellent. Bolt doesn't seem to move forward or back. 3 holes filled on the side of the receiver. Front sight still present and rear base. Bolt is not complete, missing firing pin, safety and cocking mechanism. 2. 1902 Carl Gustaf action, numbers matching barrel assumed to be 6.5x55. Bluing is in nice shape throughout. Front sight present and rear sight base, elevator/ladder is not. Bolt is stuck in place and looks to have a chip out of the rear section. Has a weld on the underside of the action. 3. Swedish Nitro proofed action, Husqvarna 30-06 barrel. Bluing is in nice shape, shows normal marks. Bore is in very nice shape. No bolt. Front sight still present. These will be sold as is with no warranty or guarantees. Looking for $195 shipped each, or $525 shipped for the 3 of them. Insurance by request on buyer. Open to all trades. Can send more pictures upon request. Pm or text/call 204 795 2850 for more info.

categories:Sporting GoodsGuns

5968 impressions

643 views

Winchester Model 1894 38-55 Ref #1040 This Winchester is a lever action, sporting rifle, octagon barrel, full mag. Dated 1895 Stock is very good – good. Small tang crack 1” long, and a minor chip gone at tang. Forearm has an app. 2” crack and a few very minor cracks. The stock has typical bang marks. Finish appears original or period correct. Original metal recoil pad fits well. Barrel is 26” long with sights intact, rear sight may have been replaced at one time, again period correct. Bore has black powder corrosion but it’s clean now and has rifling top to bottom. Bluing appears original and app. 75-85% throughout. There are bumps and scratches on metal and evidence of minor surface rusting. Screws have been used, but in very good shape. The lever functions well, safety checks out and the trigger pull, and drop are good. Firing pin is evident and protrudes when pushed on. Ejector is intact and tight, and magazine follower functions correctly. Overall, I grade this firearm as very good and should be fully functional. I did not test with snap caps or fire. Only reasonable offers are considered. Low ball offers will not be responded to. Trades in person only. The firearms and accessories I sell may be new or used and are usually acquired through estate liquidations. I visually inspect them and check basic operation only and share what I know or find in the description and photos. They are not live test fired. I provide full disclosure on what I find but can not be held responsible for what I may miss. It is your responsibility to have your firearm inspected by a competent gunsmith before firing, shoot at your own risk. I am not a gunsmith. I do not warrantee these guns or any associated accessories, nor do I accept returns. They are, as is, where is, and all sales are final. On final purchase you have accepted full responsibility for the item. E-transfer or cash only. S/H & insurance are extra. Tracking number will be provided. I require your full name, PAL #, date of birth and email address for licence verification for firearms and ammunition. Thanks, Darcy Darcy's Estate Liquidations

categories:Sporting GoodsGuns

23846 impressions

849 views

Both are made in Brazil, both are fixed full and mod chokes. Several wood only dings in both but no cracks and very little metal wear showing a very low round count. No issues. Selling both at once. 28" is a Condor 1. by IGA What a nice Christmas Gift .... get your buddy into trap shooting over the winter ...  A great Christmas Present .... No cracks or issues.  Please use cell phone text messaging. Courier Shipping, if needed,  at your cost. If you have a hunting firearm you would like to "trade in" and if you can drive to me, ( Innisfail, Alberta, just south of Reddeer) I will consider your in person (only, no exceptions please) trade ins . For quicker response : Please call or text 403 556 0086 Please see my other ads. I have lots of rifles, shotguns, Scopes / ammunition / slings / cases etc available for extra. I can mount and bore sight for you too. PAL verification required. NO COD, cash or e transfer payment needed. Return customers / locals always given preference.

categories:Sporting GoodsGuns

16738 impressions

728 views