Brand new Non restricted Action: Lever Action Caliber: 30-30 Win Capacity: 6 + 1 Finish: Stainless Steel Grip Type: Black Synthetic Stock Overall Length: 37.8" Rate of Twist: 1-in-20" Receiver Finish: Forged 416 Stainless Steel Sight: Adjustable Sights RS: XS Ghost Ring FS: Gold Bead Special: Threaded Barrel Weight: 7.5 lbs. Flat-Faced Trigger M-LOK Slots on Forend Picatinny Top Rail Made in USA

categories:Sporting GoodsGuns

3568 impressions

217 views

Selling/trading a few Dan Wesson Model 15 barrels and parts. The two prohibited barrels will require a valid 12(6) license to purchase, and the restricted barrels will require a valid restricted license. As follows: 1. 8" vent rib barrel, solid underlug w/ shroud. Bore very good. $495 shipped 2. 6" vent rib barrel, solid underlug w/ shroud. Bore very good. $495 shipped 3. 4" vent rib barrel, solid underlug w/ shroud. Bore very good. $495 shipped 4. 2" vent rib barrel, solid underlug w/ shroud. Bore very good. SOLD 5. 4x interchangeable front sights (2 white, 2 yellow). $45 each 6. Spring Kit #12 (assuming factory). $20 7. Wood grips, modified to fit a smaller hand. $50 8. Factory "Pistol Pack" case w/ correct yellow lined inside (no keys for locks). $195 shipped I'll be keeping one of the non restricted barrels, whichever one is left after the first one sells. Shipping included on the barrels and case, flat rate shipping of $18 on the sights, springs and grip. Open to selling the collection as a lot. Open to all trades. Can send more pictures upon request. Pm or text/call 204 795 2850 for more info.

categories:Sporting GoodsGuns

4559 impressions

684 views

PLEASE READ CAREFULLY: You must obtain a letter of exemption from the CFO of your province in order to buy a handgun in Canada as of October 21, 2022. - SMITH & WESSON Model 2206 /22 lr caliber has a solid stainless steel frame, ss slide and barrel - MINT CONDITION /like new in original box / A TRULY SUPERB TARGET PISTOL! - 6 inch /152mm long barrel with Target-Crowned Muzzle - The barrel is milled into the bottom of the pistol's frame, giving it an EXTREMELY low bore axis, thus, creating virtually no muzzle-rise with each shot fired - Very light, short and crisp trigger pull with adjustable over-travel set-screw behind the trigger - Barrel and front sight do not move when the slide reciprocates, making it very accurate with fast follow-up shots - Fully adjustable rear sight for windage and elevation with LONG sight radius, for better accuracy - 4 (10 rnd) steel, extremely reliable S&W magazines - Takedown tool, Rear sight adjustment S&W screwdriver - Spare extractor, springs and retainer pin (included) from the factory - Instruction Manual - Weight 39 oz /1106 g unloaded UPGRADES: 1- Trigger Job by Gunsmith to lighten the trigger pull 2- Professionally dehorned edges by Gunsmith (all sharp edges have been slightly rounded) 3- Modified 1/8 inch grip inserts (installed) to improve the overall grip and feel 4- Stainless steel allen head GRIP screws (lengthened & installed) 5- Grip tape (installed) Note: Serial Number has been blacked out in all photos

categories:Guns

36135 impressions

3694 views

1) Marlin 336 - 1894 Front Barrel Band Screw (pre 84) - $45.00 each for one screw - $40 each for 2 or more 2) Marlin 336 - 1894 Front Barrel Band Screw (post 84) - $45.00 each for one screw - $40 each for 2 or more 3) Marlin 336 - 1894 Rear Barrel Band Screw - $45.00 each for one screw - $40 each for 2 or more 4) Marlin Tang Sight Screws (2) - $45.00 --- 5) Marlin Bullseye Stock Inlay - $35.00 6) DT-1 Marble's 3/8" Dovetail - Curved Top - $45.00 7) 8-40 Pan Head Filler Screws (2) - Blue - $20.00 8) 6-48 Pan Head Filler Screws (2) - Blue - $10.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:Sporting GoodsGuns

20591 impressions

405 views

NEW, never fired, Winchester SXP Black Shadow Shotgun. Comes with 3 chokes. Gauge:  12 Chamber Length:  3" Barrel Length:  26" Overall Length:  46 1/2" Length of Pull:  13 3/4" Drop at Comb:  1 5/8" Drop at Heel:  2" Weight:  6 lbs 12 oz Magazine Capacity:  4, 2 3/4" shells Rib Width:  1/4" Barrel Finish:  Matte Stock Finish:  Satin Chokes Included:  Full, Modified, Improved Cylinder Receiver Finish:  Matte Dura Touch Finish:  No Chamber Finish:  Chrome Plated Chamber and Bore $400 shipped PAL required Can text or reply to ad Jason 204-799-6148

categories:Sporting GoodsGuns

12470 impressions

744 views

Shipping: 6 dollars anywhere in Canada! I ship 1 to 4 items per box What: 9 CAD for each bore snake. 4.5mm / 5.56mm (C7, C9) / 7mm / 7.62mm (C6) / 9mm / .22/223cal / .17/.177/.17HMR/.17WMR / .270/.280/.284 cal / .30/.308/.30-06/.300/.303 cal / .38/.357/.380 cal /.45/.45 cal SVP, veuillez voir mes reviews: Je suis un bon gars! LOL Please chek my reviews, i'm good guy! LOL "Revolutionize Your Firearm Maintenance with your Bore Snake!" Your bore snake simplifies firearm maintenance, allowing you to spend more time shooting and less time cleaning. With just a few quick passes, watch as it effortlessly removes fouling, debris, and residue from your firearm's bore. What: 9 CAD for each bore snake. Shipping: 6 dollars anywhere in Canada! I ship 1 to 4 items per box Liste of caliber / Liste de calibre 4.5mm 5.56mm (C7, C9) 7mm 7.62mm (C6) 9mm .22/223cal .17/.177/.17HMR/.17WMR .270/.280/.284 cal .30/.308/.30-06/.300/.303 cal .38/.357/.380 cal .45/.45 cal Please contact me, i will prepare all staf for you EMT: akhdmitry@gmail.com Un cordon de nettoyage, aussi appelé "bore snake" en anglais, est un outil utilisé pour nettoyer le canon d'une arme à feu. Il se compose d'un cordon flexible tressé avec une extrémité lestée et une brosse attachée. Pour nettoyer le canon d'une arme à feu à l'aide d'un cordon de nettoyage, vous faites passer l'extrémité lestée à travers l'ouverture arrière (le "breech") du canon de l'arme, puis vous tirez le cordon à travers le canon, entraînant la brosse avec lui. Cette action aide à éliminer les résidus, les débris et les saletés des surfaces intérieures du canon. Les cordons de nettoyage sont populaires parmi les propriétaires d'armes à feu pour leur praticité et leur efficacité à nettoyer rapidement les armes à feu, en particulier sur le terrain ou sur le pas de tir. Whats is a bore snake? A bore snake, also known simply as a "snake," is a tool used for cleaning the bore of a firearm. It consists of a flexible, braided cord with a weighted end and a brush attached to it. To clean the bore of a firearm using a bore snake, you drop the weighted end through the breech (the rear opening) of the firearm's barrel and then pull the snake through the barrel, dragging the brush along with it. This action helps remove fouling, debris, and residue from the barrel's interior surfaces. Bore snakes are popular among gun owners for their convenience and effectiveness in quickly cleaning firearms, especially in the field or at the rang

categories:Guns

11931 impressions

447 views

Price breakdown Price for the unused rifle is $1700, including rifle+picatinny rail+rifle case and sling + shipping. Price for the scope is $1500, including scope with box and accessories+vortex precision rings + vortex lens covers + shipping. Price for the full set is $3000 including shipping. ---------------------------------------------------------------------------------------------------------------- 1. Tikka T3x .308 with heavy stainless steel barrel, brand new, never fired.       original price $ 1600 ex. tax 2. Vortex Viper HD 5-25x50 FFP MRAD, with original box and accessories, with vortex scope lens covers, first hand, lightly used. New-generation product, recently released, featuring a hunting-focused design with a capped windage turret and a locking elevation turret.  It is a successor to the PST gen 2 but this is more of a budget Razor LHT, which is a lightweight hunting optic. original price  $ 1500 ex. tax 3.  Vortex precision rings with spare screws included    original price $290 ex. tax 4. Talley Picatinny scope rail         original price  $70 ex. tax 5. Flambeau Express 48 Rifle Case and Rifle Sling    original price   $100 ex. tax 6. Bore Tech rifle cleaning rod   (not in the picture)   $100 with taxes and customs and shipping from US --------------------------------------------------------------------------- Total: $ 4100+ including tax NOW $ 3000 FULL SET including shipping. ------------------------------------------------------------------------------------- The scope is mounted on the rifle, but it hasn’t been zeroed. Never bring to the range. PAL must be verified. Can send more pictures upon request. Please message me here or via Email: kyle69025@gmail.com Lowball offer will be ignored.

categories:Sporting GoodsGuns

6184 impressions

763 views

HAD A STROKE AND MOVING CLOSE TO KIDS. 1980 BOXFORD MODEL 330 IS 13X40, 1/12 BORE, 3PHASE 220VOLT (PHASE CONVERTER INCLUDED) 2.5/1.75HP 2SP MOTOR,30-3000 RPM, ELECTROMAGNETIC BRAKE, CHANGE GEARS FOR 31/2-128 TPI (.2-7MM),TAPER ATTACHMENT, COOLANT PUMP, 4-JAW PRATT BURNERD CHUCK, 3 JAW PRATT BURNERD,6 TOOL HOLDERS DREHBLITZ 7.5 DEGREES ADJUSTMENT, 10'' FACEPLATE, STEADY REST,MISC TOOL ACCS. $45,000.00 #1 MILLING MACHINE,R8 SPINDLE, USED FOR MOSTLY FLUTEING BARRELS, 220-3400RPM, PULLEYS, 1''X 8"X 36'' ALUMINUM TABLE EXT., 20'' TABLE TRAVEL,SERVO POWER FEED,TILT HEAD 45 DEG., SWIVEL HEAD, $15,000. LARGE TOOL BOX WITH INSERTS, DRILL BITS & MISC.MEASURING INSTRUTMENTS. $3000.00. RIFLE BARREL CART WITH MISC TAKE OFFS, $1000.00 #2 MILL IS A CRAFTEX 601, 33 X 81/2 TABLE, CUSTOM STAND FOR COOLANT,DC VARIABLE SPEED, 50-2300RPM, 110VOLT- 12AMP, 4"HOLME VISE, 6'' DIVIDING HEAD, R8 SPINDLE, $8000.00. GUN RACK FOR STANDING GUNS, 2- 6'' GRINDERS'. WORK BENCH WITH VICE & BBL VICE, $3000.00. MISC. JIGS AND FIXTURES, DRILL PRESS WITH HEAVY STAND MADE WITH VICE AND 2 TON ARBOUR PRESS, $1000.00 BALDOR 10" BUFFER WITH STAND, POLISHING GRIT, WHEELS, $2000.00-4 BLUING TANKS WITH STAND AND SOME RUST BLUE, $1000.00 8"BANDSAW LIKE NEW, $750.00. BLASTING CABINET IS SILICONE SEALED FOR INDOOR USE, ALO GRIT, NEEDS A VACUM, $1000.00 3 MONTHS OF TRAINING WITH MACHINES(I HAVE LOTS OF WORK)$10.000 MONTH IF NEEDED.

categories:Sporting GoodsGuns

7054 impressions

527 views

Ruger 10-22 Camo Synthetic Stock Semi-automatic Rifle 31191 Condition : new Tax rates shipping into your province NB, PEI, NS, NL, all pay 15% Ont, pays 13% Everybody else pays 5% GST only contact john at Doctor Deals 506-855-5377 e-transfer only Shipping through Canada Post, 18+ Signature Warranty available Fifth Edition Ruger® Collector’s Series 10/22® rifles feature a Collector’s Series bolt marking and include a Fifth Edition metal street sign, bumper sticker and pin. Camo-dipped synthetic stock. Precision-rifled, cold hammer-forged barrel capped with a Ruger® flash suppressor mounted with a 1/2″-28 thread. Factory-installed Picatinny rail with adjustable rear aperture ring sight. Stock: Synthetic — Camo Scope Ready Barrel Length: 18.5″ Material: Alloy Steel Weight: 4.5 lbs Grooves: 6 Finish: Black Overall Length: 37″ Length of Pull: 12.75″ Capacity: 10 Rounds Twist: 1:16″ 1 Magazine Included

categories:Sporting GoodsGuns

11034 impressions

614 views

Brand new Non-restricted Caliber: 12 Gauge / .22LR Action: Folding Break Open Capacity: 1 + 1 Front Sight: Fixed Red Fiber Optic Rear Sight: Adjustable M1 Military Style Barrel: 18.5" Blued Steel Chokes: Rem Choke Thread MC-1 (Modified) Frame: Blued Steel Stock: PPS Foam & Steel Forend: Quad Picatinny Overall Length: 34.6" Weight: 6 lbs Made in Italy

categories:Sporting GoodsGuns

6115 impressions

321 views

I am offering my rifle for sale. Upgraded with brand new optics and rings.  Franchi Momentum, upgraded to Momentum Elite and more.  Very good and accurate rifle, light, comfortable, reliable,  with all you need to start hunt or target shooting.  High end optics installed professional. BRAND NEW: TALLEY Ultralight Scope Mounts $60 + tax. Rifle: Franchi momentum in .308 caliber. like new, with superior optics. Brake in barrel done with 25 rounds, total shots.  Very accurate and smooth action.  Cold-hammer-forged chrome-molybdenum 22'' barrel is  free-floating with (muzzle brake NOW COST $125 + tax), bolt has a short 60-degree throw, adjustable single-stage trigger, TSA recoil pad, molded swivel attachment points, detachable straight-feed magazine,  7-Year Warranty. NOW COST $750 + tax. Optics: BRAND NEW: Vector Optics Paragon 3-15x50mm Second Focal Plane Gen 2 (SFP) 1/10 MIL Tactical Riflescope with Red Illuminated Reticle,  Lens Covers. Life time Warranty. NOW COST $460 + tax.  Including in this offer.  1. Rifle: Franchi Momentum  .308 black. $750 2. Ergonomic  shock resist sling. $65 3. Vector Optics Paragon 3-15x50mm Gen 2 (SFP)  4. Extra 3 round magazine polymer. $75 5. Franchi Momentum muzzle brake $125 6. Talley Scope mounts $60 7. Bonus: Eberlestock Gunrunner with Built in rifle scabbard back pack + 2 extra side pouches. Now cost about $400CAD Please text if you wish to possess this awesome rifle for your next hunting Trip.  Or best offer that you think it's may worthy. 6479095408

categories:Sporting GoodsGuns

5676 impressions

362 views

Please read entire ad! Prices below are not negotiable!  No trades or offers! Prices and quantities are as follows for parts: Bolt, Chinese Type 56, complete w/floating firing pin, extractor, etc - $150 Dust cover, Chinese unmarked - $40 (1 available) Long Recoil spring, complete - SOLD OUT Short spring - $15 (1 available) Short piston - $28 (1 available) Take down latch, Russian - $10 Magazine, internal 10rd pinned to 5, Chinese - $50 (2 available) Spike Bayonet, complete - $65 (3 available with spike, bolt, spring & handle – new condition). Ammo bandolero pouch, Chinese - $25 Cleaning rod, Russian - $25 Cleaning rod, Chinese/NcStar - $15 Front sight base w/bayonet lug (with sight pin & block, no mounting pins included for front sight) - $60 Tapco ODG Synthetic stock with 6 position stock (not ATI) black handguard, black molded plastic (gas tube not included) - $250 (picture to come) Gas port reamer (carbon) cleaner, gas chamber - $15 (3 available) Oil bottle, square green plastic - $3 Oil bottle, steel (round) - $6 (2 available) Oil bottle(steel), pouch - $4 Ammo pouch, Russian - $10 (2 available) 10rd stripper clips, Czech made - $3 ea (6 available) These are the only parts I have... I have no trigger groups, gas tubes, stocks, other springs, slings, barreled actions, recoil lug bolts, spring loaded bolts, rear sights or parts, muzzle brakes or bladed bayonets available. No parting out pieces of the magazines, bayonet units or receiver bolts...you purchase the whole unit. If it’s not listed above then it’s not available.  All of you know how hard it is to find SKS parts nowadays... this is it! Items and pictures will be removed once parts have been sold...items will not be “saved/on hold/held ” unless paid for in full, no exceptions! Items are sold on a first come basis w/ payment in full.  Please don’t ask about the certain serial numbers on the mags...they are either Chinese or Russian only. Shipping available – Items combined to ship / I ship within Canada only. Ship costs starts at $22 Payment by EMT (shipped) or cash (F2F pickup)

categories:Sporting GoodsGuns

43143 impressions

1520 views

Made in Finland M22000 Valmet Jyvaskyla Standard . 22LR Competition single shot bolt action. 27.5" heavy competition barrel. Adjustable butt plate and set trigger. Friction T channel sling slot. Profiled competition heavy stock for right handed use. Bushnell 3-9 x 20 scope with dovetail rails on receiver. Drilled and tapped for rear sight with front sight mount. VKT (Valmet), or the State Rifle Factory became operational September 9, 1928. Since 1930 Valmet's factory rifle club was active as well, having their hand in the design of the Finnish Lion, together with Aimo Lahti, the chief designer. 2. The Finnish Lion has the longest manufacturing time of all Finnish guns, from 1930 to 1979. Models are: M30 (prototype), M31 mod I, mod IIa, IIb, IVb, IVc, M35, M45, M52, M55, M59, M62, M65, M70, M200002 (Finnish Lion Standard) and wild boar version. Heavier models were the Finnish Lion Match and Champion. Two lighter version were also made, Junior and Pikku Leijona (Little Lion). 3. Serial numbers start from #1 (1932), and end into # 14,358 (1979). 4. The bolt and trigger are said to have been ahead of their time. The lock time is fast. Also the barrels were accurate. Champion models should have a set trigger, which makes lock time longer, but reduces pull weight. 5. Some of Vlamet's success in competition: WORLD RECORDS: -Lucerne 1939, 40 shots prone -400 points, Toivo Mänttäri -Buenos Aires 1949, 3x40 team contest 5770, finnish team, 40 shots standing, 380 points, Pauli Janhonen WORLD CHAMPINSHIPS -Buenos Aires 1949, 3x40 shots, 1165 points, P. Janhonen -Stockholm 1947, 40 shots standing, 377, H. Erben 6. The Helsinki Olympics in 1952 was the prime time of the Lion. A quarter of all shooters shot the Lion, prone gold was won by a Romanian - a Mr. Sirbu, score 400. CFP/RCMP courtesy of Bill C-71 require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Sections 99 & 101 of the Criminal code.

categories:Sporting GoodsGuns

39076 impressions

1462 views

Description - Thread Protector with high temperature retaining O-Ring (up to 400°F) - Friction and Compression of the O-Ring retains the Thread Protector and prevents it from loosening off *Extreme rapid discharge will result in temperature exceeding 400°F and loosen the Thread Protector Shipping included in the price via Canada Post Letter Mail (untracked 5-7 Business Days). Tracked shipping (for an additional cost) available upon request. Brand: Created by Cay (Yes it's my original design) ___________________________________ What's Included - 1x Thread Protector 1/2"x28" - 1x Viton O-Ring Thread Protector Specifications - Material: AISI 4140 Steel - Finish: Knurled Matte Black Oxide (Blued) - Weight: 0.5oz (14g) - Dimensions: OD: 0.728" (18.5mm) / Length: 0.492" (12.5mm) - Weight: 0.5oz (14g) O-Ring Specifications - Material: Viton® Fluoroelastomer Rubber - Finish: Black - Max Temperature: 400°F (204°C) - Hardness: Durometer 75A (Medium) - Dimensions: OD: 0.591" (15mm) / ID: 0.472" (12mm) / Width: 0.060" (1.5mm) - Finish: Black *5/8"x24 coming soon Instructions 1. Check and make sure the firearm is unloaded. 2. Loosen off the stock thread protector or muzzle device in the counter clockwise direction. 3. Clean the thread (if necessary). 4. Install the High Temperature O-Ring over the threaded barrel. Do not overstretch the O-Ring, light pressure is sufficient the slide the O-Ring over the threads. 5. Install the Thread Protector in the clockwise direction. 6. Note that the Thread Protector can be installed in either directions. The smooth direction facing the O-Ring for more compression/friction or the cutout direction facing the O-Ring for a flush/clean connection. ***Video Instructions Coming Soon***

categories:Sporting GoodsGuns

19319 impressions

698 views

1) Marlin 336 - 1894 - 1895 Folding Rear Sight & Elevator - $170 3) Marlin Front Sight Ramp (0.7" C-C) with Screws  -  $85.00 4) Marlin Front Sight Ramp (1.0" C-C) with Screws  -  $85.00 5) Marlin 336 Front Sight Ramp - Sight Insert - (298") - $75 6) Marlin 336 Hood (1972 to Present Day) - $60 7) Marlin 336 Hood (pre 1972 Rifles) - $45 8) Marlin S-27 Rear Sight & Elevator  - $155 9) Marlin Rocky Mountain Rear Sight with Elevator - $295 10) Marlin Fishhook Elevator - $35 11) Marlin 336 - 1894 Front Barrel Band Screw (pre 84) - $45 12) Marlin 336 - 1894 Front Barrel Band Screw (post 84) - $45 13) Marlin 336 - 1894 Rear Barrel Band Screw - $45 14) Marlin Bullseye Stock Inlay  -  $35.00 15) DT-1 Marble's  3/8" Dovetail - Curved Top  -  $45.00 16) 8-40 Pan Head Filler Screws (2) - Blue  -  $20.00 17) 6-48 Pan Head Filler Screws (2) - Blue  -  $10.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:Sporting GoodsGuns

79265 impressions

2103 views

Rifle Specs (6.5 Creedmoor): • Barrel: 26” stainless fluted heavy barrel • OAL: 46-1/8" • Capacity: 4+1 (detachable rotary mag) • Twist Rate: 1 in 7” • Weight: Approx. 8.3 lbs 🔧 Features: • Black & gray Max synthetic stock • Fully adjustable comb + LOP spacers • Recoil Hawg muzzle brake (5/8”-24 TPI) • Inflex 2 recoil pad • Extended bolt handle Built for long-range precision & serious performance. Vortex Tactical 4x16x44 • EBR-2C FFP reticle – accurate holdovers & windage at any magnification • 4x optical system – edge-to-edge clarity • Exposed, low-profile elevation & windage turrets • Side parallax adjustment (10 yards to infinity) • Rugged one-piece aluminum tube Affordable, field-ready FFP optic for precision shooting. Pelican® V770 Vault Rifle Case: • Fits scoped rifles – from carbines to full-length magnums • Crushproof, dustproof, & weather-resistant • High-impact polymer shell • 4 layers of customizable protective foam • 4 push-button latches for secure + easy access • Heavy-duty ergonomic handles • Interior: 50" x 10" x 6" (127 x 25.4 x 15.2 cm) Perfect for safe storage or air travel. DM for more info, pics, or to arrange a viewing.

categories:Sporting GoodsGuns

12478 impressions

1187 views

fired a box of .308 (20 rounds). Used as my back up hunting rifle but ended up just being in gun cabinet. im selling so i can afford a carbon barrel for my sig cross. the best way to reach me is through txt msg at (780)707-0541. i apologize but im not interested in trades at the moment. rifle only, scope & ring not included.

categories:Sporting GoodsGuns

18706 impressions

1791 views

Gecado nitro 16 gauge double barrel side by side serial ...18708... and 29.5 inch barrel

categories:Sporting GoodsGuns

1541 impressions

463 views

Like new Chiapa 44mag lever action 1892 Trapper skinner model 16” barrel

categories:Sporting GoodsGuns

297 impressions

43 views

Selling/trading a Lazer Mauler Canadian Edition 12 ga. Overall it's in nice shape. 16" barrel, 3" chamber, takes screw in chokes. Finish is in nice shape throughout, shows some normal dings and marks in the finish here and there. Bore is very nice. Comes with one screw in modified choke. Looking for $495 shipped. Insurance by request on buyer. Open to all trades. Can send more pictures upon request. Pm or text/call 204 795 2850 for more info.

categories:Sporting GoodsGuns

801 impressions

66 views

Heritage Rough Rider Rancher Carbine 22LR.Black 16” Barrel 6 Rounds Walnut Stock, Buckhorn Sight. Brand new.Local is preferred, but will ship at buyers expense. Further Lost insurance can be purchased by the buyer. Valid Pal a Must and will be verified for reference number. Please send message to: medal1958@gmail.com

categories:Sporting GoodsGuns

8831 impressions

649 views