Winchester Model 53 (1926) Take Down - 25-20 Win, 22" Barrel, Half Magazine, Take Down Receiver, Win 98A Receiver Peep Sight. Excellent bore and original condition. $6,500.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

53023 impressions

2162 views

Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.

categories:GunsSporting Goods

11651 impressions

520 views

At a bargain price.....one new , unopened pack of 3 bronze bore brushes in .25 caliber which I no longer need as I no longer have my 25-20 Winchester. I am willing to ship at buyer’s expense, or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery. ***   Please note that I will be attending the Edmonton Gun Show in Stoney Plain on Dec. 6th & 7th and would be able to deliver any completed purchases at the gun show ,  during show hours.   ***   

categories:GunsSporting Goods

13782 impressions

391 views

25-20 Win - 86 gr SP Core-Lokt 1 Box of 50 Rounds - New Factory Ammunition - $225.00 5 boxes available. --- Shipping can be arranged - Send full Address with Postal Code --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

3447 impressions

197 views

For Sale - BNIB Lee Precision 25-20 WCF factory crimp die only $40 - firm 1 set available Brand new in box - Contains: -factory crimp die -instructions -black box EMT or cash (pickup) - Remote pick up available by appointment only, house drop box or shipped at buyers expense by Canada Post in Canada only Small package/tracked, all provinces - $22 No trades or offers If this ad is still up then item is available.

categories:GunsSporting Goods

12771 impressions

592 views

For Sale - one Lee Precision 25-20 Win full length steel sizing 3 die set w/crimp die $80 - firm! 1 set available Brand new in box - new manufacture -full length sizing die -bullet seating die -crimp die -expanding die -powder scoop -shell holder -data, load chart, and instructions -handy red box Also have flat nose lead projectiles for sale for this caliber if your interested, no brass available thou. EMT or cash - Remote pick up available by appointment only, house drop box or shipped at buyers expense within Canada only Small package/tracked, all provinces - $22 Text, email, or leave message / unable to answer calls in remote areas No trades or offers All sales are final.

categories:GunsSporting Goods

18595 impressions

1062 views

For Sale - Lee Precision 25-35 Win steel full length sizing 2 die set $75 - firm 1 set available Brand new in box - Contains: -full length sizing die -bullet seating die -powder scoop -shell holder -data, load chart, and instructions -handy red box & Lee lubricant There is no crimp die that I can find for this die set...might be able to use a 25-20 Win crimp which I have. Payment by EMT(shipped) or cash(pick up) - Pick up available by appointment only (cash), house drop box or shipped at buyers expense within Canada only by Canada Post. Small package/tracked, all provinces - $22 Text, email, or leave message / unable to answer calls in remote areas. No trades or offers If this ad is up then item is still available.

categories:GunsSporting Goods

12265 impressions

412 views

Wanted, ammunition for old lever action 25-20. Usually comes in box of 50. Made by Winchester.

categories:GunsSporting Goods

1698 impressions

124 views

Winchester Model 1892 25-20, Ref #1038 Winchester lever action, sporting rifle, round barrel, full length magazine. Dated app. 1916. Stock is excellent, a few minor marks, small chip at tang, and butt stock was drilled for a sling swivel. Barrel is 24” long with sights intact. Bore is rough from black powder use. Bluing throughout at about 80%. All screws look good. Functionally everything seems very good. Only reasonable offers will be considered. No trades please. I will ship anywhere in Canada for $60.00. Insurance is extra. Standard Disclaimer, some items may not apply. The firearms and accessories I sell may be new or used, and are usually acquired through estate liquidations. I visually inspect them and check basic operation only, and share what I know or find in the description and photos. They are not live test fired. I provide full disclosure on what I find, but can not be held responsible for what I may miss. It is your responsibility to have your firearm inspected by a competant gunsmith before firing, shoot at your own risk. I am not a gunsmith. I do not warrantee these guns or any associated accessories, nor do I accept returns. They are, as is, where is, and all sales are final. On final purchase you have accepted full responsibility for the item. E-transfer or cash only. S/H & insurance are extra. Tracking number will be provided. I require your full name, PAL #, date of birth and email address for licence verification for firearms and ammuntion. Thanks, Darcy Darcy's Estate Liquidations

categories:GunsSporting Goods

5431 impressions

409 views

I have 150 rounds of super rare 25-20 ammunition that I formed from 32-20 cases. They are loaded with 60 grain Hornady soft points, 11.0 grains of Accurate 1680 powder and CCI-400 primers which yields a velocity of 1621 FPS. Reason I’m selling, my Winchester model 92 likes a slightly larger diameter bullet. This load and bullet did shoot really well out of my old Marlin lever gun. PAL is a must, text works best, no shipping, pick up or meet FTF.

categories:GunsSporting Goods

10822 impressions

723 views

RARE RARE, DELUXE 1892 Winchester in very fine original condition. Manufactured 1911 in the desirable 25-20 cal. with 24" oct. bbl., fine burled walnut , pistol grip, checkered stocks and a tang sight. A beautiful , fine shooting '92 , for the serious Winchester collector. $16,000.00. I offer a full money back guarantee on described condition.Possible quality Winchester trades considered. I prefer ph. calls 519-522-1764.

categories:GunsSporting Goods

29383 impressions

3179 views

An old hero 1892 SRC in great shape including the bore.

categories:GunsSporting Goods

4849 impressions

552 views

Text or call me for 6043735644 Nice condition Model 1892 Winchester in 25-20anufactured in 1917, overal condition is very nice, reciever bluing has turned, barrel and mag tube retain 85% of original bluing, buckhorn rear sights, 24" BBL, action works, no lever sag, bore has strong rifling, needs a good cleaning, wood is solid and wood to metal fit is perfect, wood shows some light handling marks, some light turn marks visible on some screws, overall a very nice condition 1917 Winchester Model 1892 rifle.

categories:GunsSporting Goods

10267 impressions

269 views

Winchester Model 1892 lever action 25-20

categories:GunsSporting Goods

8508 impressions

941 views