Brand new Non restricted Caliber: .223 Wylde Magazine: AR15 Capacity: 5 Action: Straight Pull / Pump Action Safety: Manual Thumb Safety Barrel Length: 16.5" Threaded Barrel Material: Stainless Steel Chassis Material: Aluminum Handguard: Aluminum (M-LOK) Finish: Cerakote Sights: Full Length Top Rail, Optic Ready Trigger Pull: 5-6 lbs. Overall Length: 38" Weight: 6.5 lbs. Made in Australia

categories:GunsSporting Goods

8493 impressions

502 views

*Made from ultra-soft and ultra-stretchy rubber material. *Fits Glock 17, 19, 20, 21, 23, 25, 31, 32, 34, 35, 37, 38. *Also fits S&W MP9, Sig Sauer and GSG pistol. *Its ventilated designing make your hand comfortable and dry. *Tactical enhancer, offers enhanced non-slip grip control and helps to absorb recoils.

categories:GunsSporting Goods

18050 impressions

544 views

Brand new Non-restricted Caliber: 357 MAG/.38 Special Capacity: 7 Rounds Action: Lever Action Safety: Transfer Bar Receiver Finish: Blued Steel Barrel: 17.4" Round Blued Steel Front Sight: Fiber Optic Rear Sight: Fully Adj. Fiber Optic Scopeability: Drilled and Tapped Scope Mount Type: BB-RSM Stock Material: Black Synthetic Buttplate: Black Solid Rubber Recoil Pad Length of Pull: 14" Rate of Twist: 1:16 Overall Length: 36.3" Weight: 7.3 lbs Made in USA

categories:GunsSporting Goods

681 impressions

54 views

Unfired & in Mint condition,as is the box,sleeve and all factory documents. Wrapped in original factory grease paper. PAL REQUIRED/SHIPPING INCLUDED/ NO TRADES/ PRICE FIRM

categories:GunsSporting Goods

381 impressions

41 views

Lee mold Black Powder #90394 and #90396 $ 20.00 each + shipping. = SOLD. Lee mold #451 R bal and #358-145 Wadcuter $30.00 + shipping, Mold RCBS like new use one time for test, Double, caliber 32-84gr ,wadcuter and 38 - 140gr Wad Cutter, #38-158RN $95.00 each +shipping. LAYMAN mold 446110 RN single (43Mauser) $ 95.00 + shipping Add 65.00 for Sizer die .446 rcbs. #358195 wadcutter $95.00 +shipping, #358091 wadcutter $95,00 + shipping #358495 wadcutter single $50.00 + shipping #454616 single Black powder $ 50.00+ shipping Saeco #071- 7mm GC, 160gr, $140.00 with Handle + shipping Add 80.00 for Sizer die and top punch #531. (Buy usa, 160.00+Handle 70.00+tx+shipping + custom fee + exchange money ) LAYMAN SABOT mould 20G HB 350gr single #2654120 $ 100.00 + shipping NEW in the BOX =SOLD. Small Mold cal 50 RB Brass, Made in Italy,(item collector)$50.00 + shipping JIGs 30.00 each + shipping

categories:GunsSporting Goods

14539 impressions

987 views

This is a Frankford Arsenal ammo box that holds 50 rounds of 45-70 Govt, 40-65 WCF, 50-70 Govt, 38-56 WCF, 38-70 WCF, 40-65 Ballard, 460 S&W, 50-110 WCF, 500 S&W. This has a hinged top. Text please. Buyer pays postage.

categories:GunsSporting Goods

19989 impressions

698 views

Wincheste model 94 Saskatchewan Diamond Jubilee chambered in 38-55 win. Selling for 1695 no trades. Contact if interested

categories:GunsSporting Goods

11176 impressions

615 views

USED WIN 94 SASKATCHEWAN DIAMOND JUBILEE 38-55 WIN WOOD LEVER U2558

categories:GunsSporting Goods

1910 impressions

117 views

38 Cal 158 gr Round Nose (.357) Berry’s Bullets 1000 projectiles $100.00 Pick up Lacombe

categories:GunsSporting Goods

4326 impressions

166 views

$2000 if sold by Xmas. 20” octagonal barrel. Brand new and unfired in box. Beautiful Italian craftsmanship with a smooth action which will only improve with age. My cowboy action friends tell me the Uberti is the best of the best, superior to Winchester, Henry etc. Local sale preferred. Shipping would be on your dime. Price will go up in Jan by 10%

categories:GunsSporting Goods

651 impressions

49 views

Please text anytime 6476871484. Fully functional antique revolver in mechanically perfect and ready to shoot condition ,very good action, no PAL needed. Reloadable ammo is available but sold separately Comes with FRT RCMP paperwork. Smith & Wesson 44 New Model No. 3 Top Break, .44 Special / Russian Revolver. This one is in very good condition with longer 1 9/16 cylinder and can shoot both .44 Special and 44 Russian ammo. The action is strong and accurate, and the cylinder indexes and locks properly. The bore of the 6.5-inch barrel is quite good, with strong rifling. The black hard rubber grips are good and undamaged. Mechanically in excellent condition with proper timing and lockup. The latch is also solid with zero play. Extractor works as it should. SN 10438, very good overall. History & Background Smith and Wesson's first double action design dates back to at least 1872 - years before Colt ever attempted a double action cartridge revolver. It was mentioned in a letter to the Russian envoy General Orlof, and although the sale to Russia never materialized, it served to pave the way for the very popular and successful line of double action top break revolvers. The .44 Russian model was actually the first to be produced as a prototype, and the last to be released for sale to the public. For this reason there exists a degree of confusion over the proper terminology: the first one to be manufactured for sale was the .38 caliber model, followed by the .32. The .44 caliber model was not released until 1881, and is variably known as the No. 3 Double Action, the Double Action "Navy" (a name Daniel Wesson wanted to keep alive to differentiate this model from the No. 3 single action, and still holding out hope to sell it to the Russian navy), and the First Model Double Action. Originally, the .44 Double Action was made with a 1 7/16 inch cylinder, however an optional .44-40 version was available as of 1886. This required a 1 9/16 inch cylinder, and a longer frame. The firm soon realized that it was too expensive and cumbersome to manufacture two different sizes of frames for what was essentially the same gun, and the shorter cylinder and frame were dropped in favour of the longer one in the early 1890's. The No. 3 frame .44 double action top breaks were dropped from the Smith and Wesson catalogue in 1913.

categories:GunsSporting Goods

848 impressions

415 views

Brand new mags with covers, all Gen M3. $38 each, 6 mags left, minimum purchase 3. Both side & spine pinned mags available. Stock up while you still can. Pickup in Markham (16th & McCowan) or can ship. PAL is required. Check my other ads for other PMAGs (including windowed 30s, D-60 drum), & 5.56/223/9mm/5.7x28 ammo. No trades.

categories:GunsSporting Goods

7931 impressions

362 views

New 4 - $30.00\100 packages of Remington 38 Special unprimed brass.

categories:GunsSporting Goods

44880 impressions

907 views

anyone need .38 special casings i have way too many would like to trade for other casings nw calgary i could use 357 casings or 7.62x39 open to other offers

categories:GunsSporting Goods

6984 impressions

189 views

38/55 have 10 boxes all 115.00 each.

categories:GunsSporting Goods

70397 impressions

5316 views

Saskatchewan diamond jubilee, 38,55 unfired

categories:GunsSporting Goods

60523 impressions

4140 views

Winchester Texas Sesquicentennial Rifle Commemorative 38-55 Win Made in 1986. One of 1500. Comes with bowie knife, original box / sleeve, shipping box, and oak presentation case. Pal is a must and will be verified. No trades, thanks. Price is firm. Shipping is only available on buyers expense. Call or text is best. Serious inquires only please.

categories:GunsSporting Goods

40107 impressions

1337 views

Howdy Townpost! I've got a nice little uncommon and good condition subcompact Remington for sale now! This started its life as a Remington Model 1865 New Model Police as a cap and ball percussion revolver in .36 caliber. Many of these were never percussion guns as they existed in a weird transition period. And Remington made some of them from the ground up as cartridge guns. This one most likely was in inventory as a percussion revolver and was turned into a .38 rimfire cartridge revolver based on the serial number, in my opinion. These are one of the more rare and lesser known Remington cap and ball guns that were made. Remington only made 18,000 between 1865 and 1873. So they are relatively uncommon and scarce gun today. This is actually my personal favorite model of Remington percussion revolver they're a very handy subcompact-sized gun by today's standards they're bigger and much more comfortable in the hand in the grip than the pocket models but nice and light unlike the full size military .44s and they point very naturally. This particular example is in very good condition the nickel is a very high percentage of coverage some of the original silver plate is still visible on the trigger guard and some of the low areas. The color case hardening is still very colorful and defined on the hammer (pictured). The grips have been refinished but they are the originals. The wood grain is very interesting and beautiful in my opinion. The bore is in excellent condition especially for a Civil War era black powder firearm. This was likely carried in a police officer's holster and not fired much. It was well taken care of and the clean and good condition bore and chambres are reflection of that. The the mechanical function of this firearm is excellent as well. When I got the firearm it was actually in amazing condition to begin with and the mechanical function was perfect. It locks up and times perfectly. The hammer and the trigger pull are very crisp, light and smooth. And didn't require any adjustment, Remington did the job and they did it right the first time. The entire revolver has been taken apart and given a gunsmith's cleaning and was reassembled and lightly oiled. I came across a nice little Hunter leather holster at a gun show and found that it fit this gun very well so it's included as a freebie with the gun (pictured). The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

5545 impressions

385 views

Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.

categories:GunsSporting Goods

11648 impressions

520 views

357 /38 Hard Cast 145 Grain Round Nose Bullets .. Asking 75.00 per bucket … LOCAL PICKUP ONLY IN CAMROSE , NO SHIP

categories:GunsSporting Goods

1523 impressions

63 views

Marlin 1894 Classic Rifle (Ruger - 2024) - 357 Rem Magnum / 38 Special, 18.5" Barrel, Full Mag, Checkered Stock, Original Sights, Sling Swivel Studs. As New Condition $1,885.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

2497 impressions

128 views