Please text anytime 6476871484. Fully functional antique revolver in mechanically perfect and ready to shoot condition ,very good action, no PAL needed. Reloadable ammo is available but sold separately Comes with FRT RCMP paperwork. Smith & Wesson 44New Model No. 3 Top Break, .44 Russian Revolver This one is in very good condition. The the serial numbers match . The action is strong and accurate, and the cylinder indexes and locks properly. The bore of the 6-inch barrel is quite good, with strong rifling. The black hard rubber grips are good and undamaged. Mechanically in excellent condition with proper timing and lockup. The latch is also solid with zero play. Extractor works as it should. SN 5819, very good overall. History & Background Smith and Wesson's first double action design dates back to at least 1872 - years before Colt ever attempted a double action cartridge revolver. It was mentioned in a letter to the Russian envoy General Orlof, and although the sale to Russia never materialized, it served to pave the way for the very popular and successful line of double action top break revolvers. The .44 Russian model was actually the first to be produced as a prototype, and the last to be released for sale to the public. For this reason there exists a degree of confusion over the proper terminology: the first one to be manufactured for sale was the .38 caliber model, followed by the .32. The .44 caliber model was not released until 1881, and is variably known as the No. 3 Double Action, the Double Action "Navy" (a name Daniel Wesson wanted to keep alive to differentiate this model from the No. 3 single action, and still holding out hope to sell it to the Russian navy), and the First Model Double Action. Originally, the .44 Double Action was made with a 1 7/16 inch cylinder, however an optional .44-40 version was available as of 1886. This required a 1 9/16 inch cylinder, and a longer frame. The firm soon realized that it was too expensive and cumbersome to manufacture two different sizes of frames for what was essentially the same gun, and the shorter cylinder and frame were dropped in favour of the longer one in the early 1890's. The No. 3 frame .44 double action top breaks were dropped from the Smith and Wesson catalogue in 1913.

categories:GunsSporting Goods

10767 impressions

428 views

Please text anytime 6476871484. Fully functional revolver in perfect ready to shoot condition. No PAL required. Reloadable ammo is available and sold separately. Hopkins & Allen "XL No. 4", .38 RF Pocket Revolver The markings are sharp and the numbers match on the frame, barrel and cylinder. The action is strong and tight, and the cylinder indexes and locks properly. The bore of the 2 1/2 inch barrel is very good, with strong rifling. The rosewood grips are excellent and undamaged, with varnish intact. SN 289, very good overall. History & Background One of the most prolific makers in America was the firm of Hopkins & Allen. Founded in 1868 by the principals Charles Converse, Charles and Samuel Hopkins, and Charles Allen, the firm assumed the assets of the Bacon Manufacturing Company. H&A used Bacon's machinery and inventory of parts, and continued at first to make Bacon's various models before switching to cartridge revolvers and later rifles and shot guns. H&A was in business until 1915, and claimed to be the "largest manufacturers of high-grade, popular priced firearms in the world". Hopkins & Allen were well known for their pocket revolvers and Merwin & Hulbert branded large-frame revolvers. H&A are generally of a better quality and workmanship than other suicide specials.

categories:GunsSporting Goods

6653 impressions

445 views

Please text anytime 6476871484. Fully functional double action revolver in perfect condition. Compact pocket revolver high quality and can fit in the palm of your hand.. No PAL required. Comes with FRT paperwork. Reloadable ammo is available but sold separately. Iver Johnson "American Bull Dog", .38 RF short and long Revolver Iver Johnson was one of the most prolific makers of pocket revolvers in America, from 1871 to nearly the present. One of the earliest makers of bulldog-type, double action revolvers, the Iver Johnson American Bull Dog is well known and in demand. These were made by Johnson's and the relief grip showing the American eagle on a shield is typical of Johnson's ware. ​ This one is in very fine to excellent condition, with 99% original nickel. The action is accurate and strong, and the cylinder indexes and locks properly with no play. The bore of the 2 1/2-inch barrel is good with strong rifling throughout. The black hard-rubber grips are excellent and undamaged. SN 2407, excellent overall. History & Background Iver Johnson (1841-1895) was a Norwegian gunsmith who came from Bergen to America in 1863. He found work immediately at Ethan Allen's factory in Worcester, Mass. where he met Martin Bye. Johnson worked at Allen's through the civil war years, as demand for firearms was high, and work was plentiful. By 1871 Johnson and Bye had decided to venture out on their own and founded Johnson Bye & Co. in Worcester, moving to Fitchburg by 1891. In 1883 Martin Bye left the company, selling his interest to Iver. The company name was changed to its most famous form, "Iver Johnson's Arms & Cycle Works, Fitchburg, Mass.", a name it would retain until the outbreak of the First World War. Iver Johnson did not only produce a large variety of firearms, they were also famous for their excellent quality bicycles and motorcycles. The company would remain in business until 1993. The name was "revived" in 2006 and the brand is still used today.

categories:GunsSporting Goods

9887 impressions

469 views

2 box’s of .380 ammo $55 each Can ship anywhere in Canada, Please see my other adds,

categories:GunsSporting Goods

36254 impressions

764 views

Please text anytime 6476871484. Fully functional antique revolver in perfect and ready to shoot condition ,very good action, no PAL needed. Reloadable ammo is available but sold separately Comes with FRT RCMP paperwork. Smith & Wesson 44 Double Action "First Model", .44 Russian This one is in very good condition. With original finish remains, the markings are well visible. The action is strong and accurate, and the cylinder indexes and locks properly. There is minimal side-to-side movement. The bore of the 6 inch barrel is very good, with strong rifling and little signs of wear and use. The original wooden grips are very good and undamaged. There is no wear visible. The front sight has been upgraded with a German silver blade for better accuracy. SN 12499, very good overall.​ History & Background Smith and Wesson's first double action design dates back to at least 1872 - years before Colt ever attempted a double action cartridge revolver. It was mentioned in a letter to the Russian envoy General Orlof, and although the sale to Russia never materialized, it served to pave the way for the very popular and successful line of double action top break revolvers. The .44 Russian model was actually the first to be produced as a prototype, and the last to be released for sale to the public. For this reason there exists a degree of confusion over the proper terminology: the first one to be manufactured for sale was the .38 caliber model, followed by the .32. The .44 caliber model was not released until 1881, and is variably known as the No. 3 Double Action, the Double Action "Navy" (a name Daniel Wesson wanted to keep alive to differentiate this model from the No. 3 single action, and still holding out hope to sell it to the Russian navy), and the First Model Double Action. Originally, the .44 Double Action was made with a 1 7/16 inch cylinder, however an optional .44-40 version was available as of 1886. This required a 1 9/16 inch cylinder, and a longer frame. The firm soon realized that it was too expensive and cumbersome to manufacture two different sizes of frames for what was essentially the same gun, and the shorter cylinder and frame were dropped for the longer one in the early 1890's. The No. 3 frame .44 double action top breaks were dropped from the Smith and Wesson catalogue in 1913.

categories:GunsSporting Goods

4297 impressions

230 views

Please text anytime 6476871484. Fully functional antique revolver in ready to shoot condition ,very good action, no PAL needed. Reloadable ammo is available but sold separately Comes with FRT RCMP paperwork. Smith & Wesson 44 New Model No. 3 Top Break, .44 Special / Russian Revolver. This one is in very good condition with longer 1 9/16 cylinder and can shoot both .44 Special and 44 Russian ammo. The action is strong and accurate, and the cylinder indexes and locks properly. The bore of the 5 inch barrel is quite good, with strong rifling. The black hard rubber grips are good and undamaged. Mechanically in excellent condition with proper timing and lockup. The latch is also solid. Extractor works as it should. SN 10682, very good overall. History & Background Smith and Wesson's first double action design dates back to at least 1872 - years before Colt ever attempted a double action cartridge revolver. It was mentioned in a letter to the Russian envoy General Orlof, and although the sale to Russia never materialized, it served to pave the way for the very popular and successful line of double action top break revolvers. The .44 Russian model was actually the first to be produced as a prototype, and the last to be released for sale to the public. For this reason there exists a degree of confusion over the proper terminology: the first one to be manufactured for sale was the .38 caliber model, followed by the .32. The .44 caliber model was not released until 1881, and is variably known as the No. 3 Double Action, the Double Action "Navy" (a name Daniel Wesson wanted to keep alive to differentiate this model from the No. 3 single action, and still holding out hope to sell it to the Russian navy), and the First Model Double Action. Originally, the .44 Double Action was made with a 1 7/16 inch cylinder, however an optional .44-40 version was available as of 1886. This required a 1 9/16 inch cylinder, and a longer frame. The firm soon realized that it was too expensive and cumbersome to manufacture two different sizes of frames for what was essentially the same gun, and the shorter cylinder and frame were dropped in favor of the longer one in the early 1890's. The No. 3 frame .44 double action top breaks were dropped from the Smith and Wesson catalogue in 1913.

categories:GunsSporting Goods

5660 impressions

612 views

Mint condition and stupid accurate left hand Bergara B14 Hmr in 22-250. 1:9 twist rate for the heavys. Threaded muzzle. Aluminum inner chassis in the fully adjustable stock. Aics bottom metal. Talley picatinny rail. Champion 6-9 pivoting bipod. Burris steel Zee rings. New Bushnell Engage 4-12 scope with Deploy Moa reticle and side parallax adjustment. 1 pound of H380 powder. 1 set of new Lee dies with shell holder and factory crimp die. A Weaver 2pc base set. 40 rounds once fired Sako brass. 120 rounds of Sako Gamehead 50gr ammo. Sorry no shipping. Package price. Text is best.

categories:GunsSporting Goods

1704 impressions

99 views

Very good shape model 94 in 3030, has some little safe dings but other than that its in amazing shape and locks up tight. Its a very very good shooter and has barely been shot. I have a bunch of ammo I can add for extra cash. Only trades I would consider is a 338cal or 375cal.

categories:GunsSporting Goods

1643 impressions

116 views

65 x 338 Winchester Magnum ammo factory loaded could exchange for 338 Lapua

categories:GunsSporting Goods

3901 impressions

287 views

One and half box ammo. 40$ or trade for 410 or 12 ammo,22cal.

categories:GunsSporting Goods

7709 impressions

511 views

Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.

categories:GunsSporting Goods

19792 impressions

729 views

Looking for good quality Federal 38 special +P ammo at the best price? lots available. Need Pal. cash or etransfer only. preference to winnipeg area buyers as shipping ammo is not worth it. retail about $60-65 with taxes wholesale price at $35 net cash

categories:GunsSporting Goods

7326 impressions

408 views

This is a Frankford Arsenal ammo box that holds 50 rounds of 45-70 Govt, 40-65 WCF, 50-70 Govt, 38-56 WCF, 38-70 WCF, 40-65 Ballard, 460 S&W, 50-110 WCF, 500 S&W. This has a hinged top. Text please. Buyer pays postage.

categories:GunsSporting Goods

22202 impressions

776 views

Dies , ammo , once fired brass. What you see is what you get. $200 403 809-4521 text or call.

categories:GunsSporting Goods

5573 impressions

436 views

Brand new mags with covers, all Gen M3. $38 each, 6 mags left, minimum purchase 3. Both side & spine pinned mags available. Stock up while you still can. Pickup in Markham (16th & McCowan) or can ship. PAL is required. Check my other ads for other PMAGs (including windowed 30s, D-60 drum), & 5.56/223/9mm/5.7x28 ammo. No trades.

categories:GunsSporting Goods

9717 impressions

420 views

Hello I'm selling a Arisaka-Carcano Type I Rifle, it is Italian made for the Japanese Imperial Navy for WW2. This is a combination of the Carcano 1891 and a Type 38. It has the action and barrel of a Carcano and it is chambered in 6.5 Jap, has the 2 piece stock, 5 round internal magazine, and the sighting system of the early Type 38. The bolt and receiver has markings from Fabbrica Nazionale d'Armi - Brescia, this is the more uncommon version accounting for roughly only a quarter of production with total estimates from 60k-130k across all factories. Two types of Type I buttstocks were made, the short and long version and this rifle is the long buttstock version. The bolt on the Type I cannot be swapped with a Carcano and vice versa as the Type I bolt has a slightly different location cut for the ejector. The exterior metal has some surface wear and some light surface rust with the buttplate being the most worn. The internals and bore are in good condition with good rifling as shown in the images and the bullet test, the bullet I used was the 6.5 Jap Norma Factory ammo. It is missing the cleaning rod and ejector, luckily the ejector is readily avaliable in parts stores such as Numrich. The rifle has a hidden duffle cut under the front barrel band, the previous owner repaired the duffle cut by putting a small wooden dowel in the cleaning rod hole and glueing the 2 pieces together. The glue has come loose and would need to be re-glued. The rifle shoots well using 0.264 Speer bullet handloads at 25M with all the shots landing well without any keyholeing. If you have any questions or request more pictures let me know and and I would be happy to help. Can meetup in the GTA for local sales. $1350 plus shipping, thank you for looking.

categories:GunsSporting Goods

1255 impressions

211 views

These are custom made too order. See list below of "sizes" available. These can be printed in 10, 20, 50, 100, round boxes. Lots of colors available. The black printed boxes can have custom designs done using a galvo laser. These are $20.00 and up. Let me know what you are looking for and i will get you a price. These are printed on demand due to color choice, however can usually with in 24 hours. If you dont see your caliber listed just let me know which one you would like and we can create it for you. 9mm 40 S&W 45 AUTO 6.5 Creedmoor 243 WIN 5.56 270 WIN 308 WIN 300 BLK 8x51R 41 REM MAG 6mm ARC 6.8 REM SPC 224 Valkyrie 22-250 REM 450 Bushmaster 30-06 SPRG 38 SPECIAL 357 MAGNUM 10mm 223 REM 7.62x51mm NATO 30 Carbine FN 5.7x28mm 7.62x39mm 22 LR 350 Legend 17 HMR 22 WMR 44 REM MAG 45 Colt 6.5 PRC 6mm Creedmoor 300 WIN MAG 28 Nosler 7MM REM MAG 6.8 Western 380 ACP 300 WSM 8x57 mm Mauser 8x60 mm 7.5x55mm Swiss 6.5x55mm Swedish 357 SIG 30-30 WIN 9x18 Makarov 7x57mm Mauser 32 ACP 50 AE 32 S&W LONG 375 H&H Magnum 9.3x62 mm Mauser 300 PRC 7mm RSAUM 500 S&W Magnum 7.62x54R 45-70 GOVT 300 RUM 260 REM 22-243 44-40 280 REM 458 SOCOM 303 BRITISH 25-06 REM 280 ACKLEY 338 LAPUA 338 WIN MAG 220 SWIFT 32 French 7mm-08 Remington 9.3x74R 7x64mm 300 Savage 444 Marlin 35 Whelen 460 S&W Magnum 454 Casull 6.5 Grendel 270 WSM 8x68S 26 Nosler 300 WBY MAG 256 WIN 7mm PRC 25 ACP 222 REM 300 NORMA MAG 6mm Dasher 410 ga 22 Hornet 38-55 Win

categories:GunsSporting Goods

105942 impressions

1694 views

EDITED DEC 22 2025 I understand some in that list may be on the prohibited list, just ignore it, they will not be transferable. Therefore not for sale. This is a generic list, if you want info or pictures of a specific item let me know. No low baller No PayPal deal from Nigeria is.... Serious buyer only -akkar Churchill 12ga o/u gold plate ***SOLD!!!*** - am arms co Boston 1898 10ga Damascus steel brakes sideways ***SOLD!!!*** -remington 870 express 12ga -kral arms o/y 12ga new ***SOLD!!!*** -1929 Grand prix Milano 16ga side by side -carcano 1940 (exact same gun that shot jfk) -suomi drum mag -16 ga side by side -sks laminated stoke with thumb hole ***SOLD!!!*** -winchester alberta diamond jubilee 30-30 ***SOLD!!!*** -el Faisal 410 side by side ***SOLD!!!*** -norinco jw2000 12ga ***SOLD!!!*** -Japanese police parade sword ww2 ***SOLD!!!*** -carcano carabiner ***SOLD!!!*** -us model 1917 eddystone 30-06 -lee enfield no4mk1 -mosin nagant -sks ***SOLD!!!*** -20ga single shot turkish ***SOLD!!!*** -tm22 with red dot -410 o/u turkish ***SOLD!!!*** -300 rum model 700 with vortex viper 6.5-20/50 scope -ruger 22 mag bolt action with scorpion 4-16/44 scope -marlin 1895 sbl 45-70 -uts 15 with red dot pump 12ga ***SOLD!!!*** -super black eagle 3 semi 12ga -cadex 338 full set up with nightforce nx8 scope ,laser level for extreme long range.... the whole nine yard ***SOLD!!!!!*** -lee enfield cavalry carabine 1898 ( extremely rare, serious collector only) - full reloading kit and ton on components.... -Huge lot of ammo as well Annealing machine, wet tumbler, digital auto feeding scale.... - level 4 plate carrier with pouch and first aid kit.... ***SOLD!!!*** -cross bow bear x intense with scope (brand new) ***SOLD!!!*** -pse bow with case and accessories

categories:GunsSporting Goods

31980 impressions

2496 views

38-55 ,25 in. rnd. barrel ser.#177269 ,D o M 1899 add $250 for reloading tool and bullet mold and 2 boxes ammo

categories:GunsSporting Goods

30862 impressions

2937 views

I have some left over ammo that didn’t go with a gun after grandpas passing I have 4 cable locks SOLD 4 boxes of ammo SOLD .338 WM (browning) magazines +3 rounds of .338 WM to go with it The ammo is as follows: - .222 federal Remington 50 grain soft points (17 rounds) $2/round = $34 SOLD - .222 Peters high velocity 50 grain soft point (11 rounds) $2/round = $22 SOLD - .300 Win Mag PMC 150 grain (10 rounds) $3/round = $30 SOLD - .300 Win Mag Remington high velocity 150 grain (8 rounds) $3/round = $24 SOLD - .300 Win Mag Imperial (2 rounds) $3/round $6 SOLD -.338 Win Mag $5/round = $15 + Browning 3 round magazine $75 - 4x cable locks $10 each SOLD If purchasing/trading the lot can include an ammo can to go with it Open to offers and trades Will consider CZ .22, bolt action 22, 204 ammo Texting preferred PAL REQUIRED

categories:GunsSporting Goods

5754 impressions

223 views

Sako hammerhead 7mm rem mag 170gr bonded soft point ammo. 6 boxes available, 10 cartridges box $30 a box Text 780-838-2662 or 780-271-4799

categories:GunsSporting Goods

5676 impressions

252 views