Now that I'm in my late 70's , I am downsizing my antique gun and militaria collection to move into a much smaller house with a much smaller gunroom.......offering an original 1880's Mills pattern , woven ammo belt with a rare 1881 Patent Mills/Orndorff brass buckle and retainer. The loops hold .40 to .45 caliber rounds and included are twenty .44-90 Sharps bottleneck cartridges. Please view the photos closely as the belt has been well used and has some damaged loops and earlier field repairs.....I have always refrained from doing any repairs or "enhancements" to my original antiques as the wear and tear is a natural part of its history and character. The cartridges are not original but are repro brass which was purchased about 45 years ago and which I loaded with black powder and some very old primers which were purchased about 50 years ago ( used for display purposes only ). The belt and attached buckle were purchased by me in 1967 at an Ohio gun show. The brass buckle has that beautiful patina which only time can create and it does have a few dents from honest wear and tear.....contact me if you interested and need more photos, or different angles, as the website only allows 10 photos. This is a rarely encountered ensemble.    I am willing to ship at "BUYER'S EXPENSE" but it will need to be by a trackable and insured method, or I offer local pick up --- OF COURSE I CANNOT SHIP THE BLACK POWDER CARTRIDGES WITHOUT REMOVING THE POWDER AS THEY ARE CLASSED AS EXPLOSIVES.......THIS COULD BE POSSIBLE AS I HAVE NEVER CRIMPED MY SHARPS CARTRIDGE RELOADS WITH PAPER PATCHED BULLETS. I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery.               *** PLEASE NOTE *** , I will be attending the AACCA one day Arms Show, on Sat. January 10th, 2026, at Thorncliffe Community Center in Calgary, and could deliver any prior completed purchases there, during show hours ( 10:00 am to 4:00pm).

categories:GunsSporting Goods

43 impressions

6 views

Winchester, Conservation officer Centennial 20 inch carbine . Gun is as new and unfired. These Conservation officers Centennial‘s are one of the rarest and most sought after Commemoratives . Gun has beautiful walnut stock, engraved silver plated receiver, and barrel bands. $5500 shipped.

categories:GunsSporting Goods

9592 impressions

482 views

This is from the estate of my late father in law, who was an avid gun collector. No this is not in pristine museum quality condition. Prices reflect condition. Offers may be considered, but low ballers will be ignored or told to F off. If you don't like the price keep scrolling. This beauty was built between 1890 and 1920 we believe it is from 1891. Brass butt plate, inlay in forestock. It has a 180 choke..

categories:GunsSporting Goods

18884 impressions

969 views

Churchill 206 Gold Engraved O/U 12ga Hand Engraved O/U12 Ga, 3” Chamber, 28” "Duck Gun" Auto Ejectors Chokes: 5 mobile chokes Weight: +- 7.2lbs Barrel: 28" Overall: +-45" $1,279.99 NO GST (Private Sale) FIRM Brand New - Never Fired Heirloom Quality Collectible Local Pick Up in Aspen Trails, Sherwood Park *Not Interested in Trades* ***Registered Email, Valid P.A.L. # & D.O.Birth will be required to verify yr PAL for Transfer*** Shipping *at your expense* could be arranged as necessary 12ga shotgun

categories:GunsSporting Goods

70583 impressions

4031 views

Here's the deal 👊🏼 $127.99 / 250 rds (10 boxes x 25 rds) = a "case" = +- $0.51 /rd Multiple cases available Or $13.29/ Individual Box. Private Sale = no GST =+- $0.53 /rd Shot size = 7.5 Velocity (Fps) = 1180 Ounces of shot = 1 oz Length = 2.75" Compare $159.99 + GST = +- $168.00 / case at Canadian Tire or other spots for $15.99 + GST / Box ** Not interested in Trades ** Local Pick Up Aspen Trails, Sherwood Park, AB (Valid P.A.L., Date of Birth and Email required to verify online)

categories:GunsSporting Goods

45287 impressions

2375 views

I am selling a grey Underwater Kinetics UK 718 UltraCase in like new condition. There are no scratches, cracks or nicks. Latches are perfect. It measures Inside: 17.8" x 12.8" x 6.8" with a 2" layer of pluck foam. Ideal protection for instrumentation, sales presentation packages, test equipment, photographic equipment, guns and other delicate equipment Tough injection molded ABS outer shell will withstand a 7 foot drop to concrete Silicone rubber o-ring seal lasts for years without hardening or crazing to keep out water and corrosive gasses Dual function latches hold the lid tightly closed and equalize pressure when released for easy opening Padded fold-down handle makes for easy carrying Full length hinge, padlock loops and two front latches secure contents during transportation These are very high quality cases. I am asking $100 obo. This particular case is $335.00 new. Email lor text if interested.

categories:GunsSporting Goods

25476 impressions

597 views

Chinese sling (two variants) $40 shipped Oiler $10 (still in package, photo of my personal one) Cleaning kit $15 shipped Amber shellac touchup: this service will help you restore flaking SKS/mosin/svt or any gun stock that uses shellac shipping extra

categories:GunsSporting Goods

74993 impressions

3334 views

Please text anytime 6476871484. Fully functional double action revolver in perfect condition. No PAL required. Comes with FRT paperwork. Reloadable ammo is available but sold separately. Colt M1889 "Navy", .41 Long Colt Revolver This one is in excellent condition. It bears about o 99% of its original nickel plating. The nitre blue on the trigger, hammer and screw heads is well visible. The action is smooth and accurate, and the cylinder indexes and locks properly. The bore of the 4.5 inch barrel is fine and bright, with sharp rifling. The markings are sharp and defined throughout. The assembly numbers match on the cylinder, crane, barrel and frame. The grips are excellent and undamaged, showing no wear.SN 20959, rated excellent overall.​​ History & Background This model is an important milestone in Colt handgun development, as it is the first American revolver with a swing-out cylinder mounted on a crane, a development which would become the standard for modern revolvers to this day. The 1889 cylinder mechanism was already "on the books" as early as 1880, based on designs of Colt engineers William Mason, C.J Ehbets and Horace Lord. It would take almost ten years for Colt executives to give the green light to manufacture this gun, and once it was available, the US government quickly took notice and ordered several thousand for the Navy. Colt adopted the name "New Navy" in honor of this order. The gun has an interesting counter-clockwise cylinder rotation and a locking mechanism which relies entirely on the two-pronged hand. This would prove to be a weakness in the design, and by 1892 locking lugs on the outside of the cylinder were introduced. The 1889 model would remain in production for 18 years, with significant improvements in 1892, 94, 95, 96, 1901 and 1903. When it was first introduced in 1889, it met with no competition from the other major makers - Smith & Wesson were still heavily engaged in manufacturing top-break revolvers, and Remington only had their solid frame revolvers with removable cylinders to offer. It would take S&W another ten years before they had a viable alternative to Colt's design.

categories:GunsSporting Goods

15928 impressions

874 views

Please text anytime 6476871484. Fully functional double action revolver in perfect like new condition. No PAL required. Ammo is available but sold separately. Comes with FRT paperwork. Swiss M1882 Service Revolver, 7.5mm/ 32 S&W Swiss Ordnance The Swiss Service Revolver of 1882 was a modification of the Nagant revolver in use since 1878. It was modified by Swiss Colonel Rudolf Schmidt. It employs the Georges Abati cylinder advance system, by which the cylinder can be advanced without raising the hammer when the loading gate is open. This allows the shooter to load and unload the cylinder quickly, without having to touch the hammer. The gun is of typical Swiss quality, with clock-like precision.​ This one is in very fine condition, as restored. The blue is intact. The markings and numbers are sharp. The serial numbers match. There are also several sub-assembly numbers visible. The action is strong and accurate, and the cylinder indexes and locks properly. The bore of the 4 1/2 inch barrel is good, with sharp rifling and no signs of use. The gun is chambered for the Swiss 7.5mm cartridge, but will accept a .32 S&W long/short as well. The brown plastic grips are excellent and undamaged. SN 2357, very fine as restored.

categories:GunsSporting Goods

9686 impressions

636 views

Taken out of the box for photos only. 16 inch barrel. NO TRADES, price is firm and shipping on buyer. If you have any questions text me at 250-713-9149. Please check out my other posts of other new Ruger Marlin guns. Thanks for viewing. Will have several new Ruger models in approximately 3 weeks please text me at 250 713 9149 if interested.

categories:GunsSporting Goods

3216 impressions

178 views

Czech K98k in 8x57 Manufactured after WWII at Brno factory.The L serial block id makes it 1946-1947. All numbers matching except the safety and cocking piece were numbered when factory was reusing some old parts. Matching number laminated stock. This is the K98k that was the predecessor to VZ24. It has the typical rampant lion crest. Turned-down bolt handle. Very clean example. Excellent shape. No rust. Value is $1600-$1900 condition depending. This one is very clean in excellent+ condition. Price is $1600 obo. Located in Calgary. Will ship within Canada. Buyer pays shipping. Valid PAL and gun transfer reference number will be required.

categories:GunsSporting Goods

7132 impressions

595 views

Original wooden bottom stock guard / furniture for a Lee-Enfield No.4 Mk I. Purchased new-from-surplus via Numrich Gun Parts (USA), this is a genuine period-style part (not a modern reproduction), suitable for collectors restoring a No.4 Mk I or for someone looking to keep a build authentic. Stamped ‘F’ — likely Fazakerley ROF, appears to be beech. Please text or email for additional information/pictures. No Trades. Stock is located in North Battleford. I regularly travel between Calgary, Edmonton, Red Deer and Saskatoon and can meet at a mutually convenient midpoint. If any of those cities work for you I can arrange to meet there or somewhere in between along the route. Please suggest a location and time and I’ll do my best to accommodate.

categories:GunsSporting Goods

6383 impressions

285 views

Original Lee-Enfield No.4 Mk I top guard set, purchased from Numrich Gun Parts (USA) back when they carried original surplus parts. No visible maker stamps; includes the metal muzzle cap as shown. Structurally sound and ready for restoration or use in a parts build. Sold as pictured. No trades. Will ship on buyer's dime.

categories:GunsSporting Goods

5372 impressions

272 views

Please feel free to ask any questions and ask for pictures or more information about anything you see interesting Remington shotgun parts Remington 1100 3" magnum barrel $250 X9 Remington 1100 12g feed latches $40 ea X3 1100 breech blocks $50-ea Remington 870 20ga breech bolt $50 x3 1100 remington locking bolt $25 ea x2 Remington 11/48 16ga trigger assy $140 ea x2 Remington 1100 ga standard breech bolts $80ea x2 Remington 870 16ga breech bolts $50 ea x2 Remington 58 12ga breech bolts $80 ea x2 Remington 11-48 20ga trigger groups $140 ea x2 Remington 11-48 .410 trigger groups $140 ea Remington 11-48 12ga trigger group $140 Remington 11-87 20ga black synthetic forend $30 Winchester shotgun parts Winchester 1200 12ga parts lot $130 Win 1400 barrel $175 Win 1400 2 3/4 reciver $130 Win 140 reciver $150 Win 140 parts lot $125 Winchester mod 50 barrel $100 Winchester mod sx1 Barrel $125 Win 1200 20ga barrel $100 X2 new in package complete ATI tactical black shotgun forend kits for remington 870, mossberg 500/535/590/835 and winchester 1200/1300 $20 each Ithaca 37 shotgun parts lot $130 Mossberg 500 12 ga barrel $175 Mossberg 500 12 ga barrel $175 Mossberg 500 breech block $50 X2 new black falcon black synthetic mossberg 500 forends $15 each Mossberg 535 barrel $175 Marlin 5510 super goose gun bolt $175

categories:GunsSporting Goods

26043 impressions

1550 views

TR 410 shotgun 2 3/4 and 3” 410 gauge with 9.4” barrel Revolver double action With full flat top picatinny rail for customization of optics and sight Accessories Weight 5.6 lbs Choke interchangeable: cylinder Modified , full Telescoping stock with adjustable cheek rest 410 ammunition sold separately

categories:GunsSporting Goods

9363 impressions

883 views

TIKKA M70 Combination 12 Gauge & .222 Rem O/U 25" barrels SHOTGUN BORE IS VERY GOOD & SHINY. REMOVABLE FULL CHOKE. RIFLE BORE IS VERY GOOD & SHINY WITH SHARP RIFLING. BLADE FRONT SIGHT, ADJUSTABLE FOLDING U NOTCHED REAR SIGHT, POLISH BLUED FINISH, VENT RIB BARREL, INTEGRAL SCOPE RAIL ABOVE CHAMBER, GROOVED WIDE SPUR HAMMER, EXTRACTOR, BARREL SELECTOR ON LEFT SIDE OF RECEIVER. TWO PIECE WOOD STOCKS, CHECKERED FOREARM AND PISTOL GRIP, GROOVED BLACK POLYMER BUTT PLATE, CHEEK REST, GRIP CAP, SLING SWIVELS. VERY NICE CONDITION. CFP/RCMP courtesy of Bill C-71 require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Sections 99 & 101 of the Criminal code.

categories:GunsSporting Goods

43304 impressions

1448 views

Non-Restricted rifle Remington model P17, .30-06 bolt action, w/ bbl length 24" [Blued barrel and receiver. Fixed front, no rear sight. Fitted with Universal 4X32 scope. Sporterized wooden Monte Carlo stock with aluminum butt plate. Fitted with sling mounts. Marked NOT ENGLISH MAKE, logo with crown and BM on left side of receiver. Other markings include .30/06 NITRO PROOF etc. on barrel, BM logo on bolt but no serial number seen. Parts gun as receiver has a crack by the nitro proof marks. Bluing worn in use and handling areas. Two drilled and tapped holes on right side of receiver with corresponding notch removed on stock, presumably from once attached rear peep sight. Handling and storage marks on wood and metal. CFP/RCMP courtesy of Bill C-71 require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Sections 99 & 101 of the Criminal code

categories:GunsSporting Goods

38384 impressions

2686 views

Brand new Non-Restricted Lever action Caliber: .44 MAG Capacity: 9 Stock: Black Laminate Receiver Material: Alloy Steel Receiver Finish: Matte Blued Front Sight: Brass Bead with Hood Rear Sight: Adjustable Semi-Buckhorn Barrel Length: 20.25" Thread Cap: Match-Polished Barrel Material: Cold Hammer-Forged Alloy Steel Barrel Finish: Matte Blued Twist Rate: 1:16" RH Grooves: 6 Weight: 6.2 lbs. Overall Length: 37.5" Length of Pull: 13.38" Made in USA

categories:GunsSporting Goods

8461 impressions

459 views

Looking to sell, or trade my Ruger American Predator 6.5 creedmoor. The gun has a few scuffs from hunting use, but shoots flawlessly. Has under 150 rounds down the barrel. The gun is topped with a Vortex Crossfire 3-9. It will also come with a Cabelas sling, and 3.5 boxes of ammo. Interested in other rifles, preferably higher caliber. Can add a bit of cash on top depending on the offer. Valid PAL required. Thanks.

categories:GunsSporting Goods

1462 impressions

113 views

**Still available if posted** Please include phone # and your email with communications as messaging replies don’t always get through. For quickest replies use text, use TownPost messaging with TownPost account or request my email. New! TriStar Viper G2 Semi-Auto Shotgun 12 Gauge, 28” vent rib barrel, 3 inch, synthetic stock, righthanded, 5+1 rd, Mobilchoke, and fiber optic front sight.
Comes with length of pull shims and 3 chokes - Full, Improved Cylinder and Modified(factory installed in the barrel). The TriStar Viper G2 is model number 24105. I might be interested in a 243 Win rifle/combo depending on brand and condition - local trade. **SEE MY OTHER RIFLE, RIFLE/SCOPE COMBO, SHOOTING AND HUNTING GEAR ADS** Valid PAL required, will come with transfer # as per new laws. First Paid, First Served.
Holds only with deposit. Delivery Negotiable.
Buyer pays for shipping costs and makes arrangements for payment. DESCRIPTION The TriStar Viper Series Semi Automatic Gas Operated Shotguns are reliable, functional and hard working. Synthetic models have 3″ chambers to take 2 3/4″ or 3″ shells. Chambers are chrome lined. Barrels are threaded for the Beretta/Benelli style choke tubes and every gun comes with 3 tubes (IC, M, F) standard. Manual E-Z Load Magazine Cut-Off. Vent Rib with Matted Sight Plane. Fiber Optic Front Sight. 3 Beretta/Benelli Style Chokes (IC, M, F). 5 Round Magazine. Chrome-line Chamber and Barrel. Soft Touch on all Synthetic Models. WEIGHT - 6.9 lbs LENGTH OF PULL - 14.25”

categories:GunsSporting Goods

21579 impressions

679 views

Howdy Townpost! I have a truly amazing one of a kind piece here for sale. I bought this for myself in the US over a year ago and I had it professionally restored and fully repaired. I am now looking to sell it. John Forbes, of Liverpool, was gunmaker to His Royal Highness, the Prince of Wales, later King George IV. And according to my research made mostly dueling and target pistols, and some small pocket pistols for only 5 years. Those years being 1805-1810. He spelt his name with I or Iohn and later switched the spelling to a J or John based on public records and some of the other examples of his dueling pistols that have sold at auction. That makes this a very rare and finely made pistol. This pistol would have cost a small fortune at the time it was made. Oftentimes dueling pistols come in pairs but it was cheaper to buy just one if they were offered as a single, and should you encounter someone who has insulted your honor and you demand satisfaction from them, they can bring their own pistol to the duel. The engraving is extremely fine, intricate and skilled. It would have taken many dozens of hours to complete and it was all done by hand. The engraving features drums, banners and spears, floral patterns, sunbursts on the base plate and lock, and a pineapple in the front of the trigger guard, which symbolizes wealth and status. Because this gun is a percussion conversion of the original flintlock mechanism the percussion hammer is engraved in a different style by a different engraver in a more simple floral and fish mouth style of engraving with gold inlay. Every screw is engraved to look like a flower and the escutcheons are also each engraved like a wreath. Overall there is a lot of fine detail with some simpler and less detailed later additions on the percussion mechanism and one spot on the side plate. The gun features gold inlay on the hammer which largely worn away. There is silver inlay on the outside of the breach, and a sterling silver wreath styled band wrapped around the base of the grip and a sliver bead front sight. The ramrod tip (which is a replacement) is silver plated brass, so too are the front stock cap near the muzzle, the rod pipe, cross key, and escutcheon around it are too. The grip baseplate is silver plated steel. The workmanship of this pistol is certainly of a quality of gunmaker worthy enough of being the gun maker of the Prince of Wales. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it too.

categories:GunsSporting Goods

12553 impressions

417 views