Looking for a gunsmith that can rechamber a family heirloom. 30-30 lever action , hex barrel would like it restored to shooting condition. Needs some assembly screws as well. Barrel could be cut down and rechambered.

categories:Sporting GoodsGuns

9999 impressions

504 views

Just wondering if there's any gunsmiths in the area to refurbish and old rifle

categories:Sporting GoodsGuns

6845 impressions

852 views

Need your M1 Garand Kit Built? A New Barrel installed, General inspection? Have cylcling or premature ejection issues? Or a handful of other Garand specific things! please reach out.and I'll be Happy to help you out! 19" Tanker models Mag Conversion M1D conversion I can build you a Garand if you're looking for a rifle! I also do work on other milsurps such as K43, etc,

categories:Sporting GoodsGuns

51406 impressions

5475 views

Please text anytime 6476871484. Fully functional antique revolver in perfect and ready to shoot condition ,very good single and double action. Reloadable ammo is available but sold separately No PAL required. Comes with FRT RCMP paperwork. Tested fired with smokeless powder ammo. Smith & Wesson 44New Model No. 3 Top Break, .44 Russian Revolver. This one is in perfect condition with 100% of the finish intact. The serial numbers match . The action is strong and accurate, and the cylinder indexes and locks properly. The bore of the 5-inch barrel is quite good, with strong and sharp rifling. Mechanically in excellent condition with proper timing and lockup. The latch is also solid with zero play. Extractor works as it should. SN 17793, very good overall. History & Background Smith and Wesson's first double action design dates back to at least 1872 - years before Colt ever attempted a double action cartridge revolver. It was mentioned in a letter to the Russian envoy General Orlof, and although the sale to Russia never materialized, it served to pave the way for the very popular and successful line of double action top break revolvers. The .44 Russian model was actually the first to be produced as a prototype, and the last to be released for sale to the public. For this reason there exists a degree of confusion over the proper terminology: the first one to be manufactured for sale was the .38 caliber model, followed by the .32. The .44 caliber model was not released until 1881, and is variably known as the No. 3 Double Action, the Double Action "Navy" (a name Daniel Wesson wanted to keep alive to differentiate this model from the No. 3 single action, and still holding out hope to sell it to the Russian navy), and the First Model Double Action. Originally, the .44 Double Action was made with a 1 7/16 inch cylinder, however an optional .44-40 version was available as of 1886. This required a 1 9/16 inch cylinder, and a longer frame. The firm soon realized that it was too expensive and cumbersome to manufacture two different sizes of frames for what was essentially the same gun, and the shorter cylinder and frame were dropped in faivour of the longer one in the early 1890's. The No. 3 frame .44 double action top breaks were dropped from the Smith and Wesson catalogue in 1913.

categories:Sporting GoodsGuns

21105 impressions

1337 views

Please text anytime 6476871484. Fully functional antique revolver in ready to shoot condition ,very smooth action. No PAL needed. Can shoot 32rf long and short. Comes with FRT RCMP paperwork. Smith and Wesson No. 2 "Old Model Army", .32 RF Revolver This one is in very good condition. With original blue. The action is strong and accurate, and the cylinder indexes and locks properly without play. The bore of the 5-inch barrel is very good, with sharp rifling and mirror bright. The rosewood grips are very good and undamaged. They look like they may have been re-varnished once. SN 59474, very good overall. History & Background Horace Smith and Daniel Baird Wesson acquired Rollin White’s patent (1855) for the bored-through cylinder to manufacture what they originally called the No. 1 revolver in .22 rim fire. It proved to be a rather ineffective little pocket revolver but was nonetheless very popular with civilians as a personal protective weapon. In 1861, just as the civil war gained momentum, S&W decided that they needed a larger caliber revolver in order to be able to convince the buying public (many of them enlisted in the war) that their gun was a viable protective option and as a back-up gun in battle. The scaled-up design was duly named the No. 2 and was nicknamed the “Army”, as it was widely used by military personnel as a personal side arm. Smith & Wesson retained and defended the Rollin White patent aggressively throughout the civil war period, and until its expiry in 1870, and therefore the No. 2 “Army” would be the only American made cartridge revolver used during this conflict (although several “unlicensed” makers added their wares into the fray, such as Uhlinger, Pond and Moore). The model is called “Old Model” due to its frame shape – the square butt and octagonal barrel of the model 1 ½ First Issue, as compared to the bird’s head grip and round barrel of the Second Issue. There is no “New Model” Army. The "No. 2 Old Model" was a popular personal side arm of many officers in the Union forces during the American Civil War, and is also known as the "Army" model. It was first introduced in 1861, and made until about 1874. The "No. 2" refers to the frame size, "No. 1" having been the first, .22 caliber pocket revolver and the "No. 3"'s being the large-frame revolvers. The 1 1/2 was introduced after the number 2, and since it fits in between the no. 1 and no. 2, it was named the no. 1 1/2. The no. 2 was owned by such famous Americans as General George Armstrong Custer and "Wild Bill" Hickok, the marshal of Deadwood...

categories:Sporting GoodsGuns

22551 impressions

677 views

Selling to get some cash flow, this is an antique, all matching and fully operational Smith & Wesson top break double action new model #3 revolver. These were the first double action guns ever made by S&W, driven by demand to increase rapid performance at close quarters while still having the choice to shoot with more accuracy in single action. These were mostly chambered in the popular .44 Russian round. These can be purchased in cowboy loads from myself as part of the deal, found online, or easily reloaded with .44 russian, magnum, or special brass. As an antique, this handgun requires no licensing or registration to buy or own in Canada. Do your own legal research! This gun is serial number 35XXX, dating its manufacture to the late 1880s. As a nearly 140 year old gun, the mechanical condition is strong, with all three positions of the hammer exactly as desired and both single and double action trigger pulls nice and light. Indexing is reliable with a lockup of both the cylinder and the top break hatch having less than 1mm wiggle room. The original hard black grips are still sturdy and nice. The 6 inch barrel on this bad boy still has loads of accurate lead to deliver. Ejector functions perfectly. Visually, the overall look is a peppered patina. Very little of the original nickel remains, with a mottled "in the white" surface being most dominant. No severe or active oxidation can be found. All of the two line address and patent info are clearly visible on the top strap, with the S&W stylized logo featured strongly on the right side. An dependable example from a world renowned manufacturer. No PAL, must be 18 Ships Canada Comes with digital FRT report Check my ads for more antiques! I make no claims about the safety of firing ANY antique gun. Check with a gunsmith!

categories:Sporting GoodsGuns

17944 impressions

1475 views

Replace cracked, missing, and worn grips or safeguard your minty originals by swapping to a new pair that you're ok with taking a beating in the field. I am selling reproduction revolver grips for models of revolvers/handguns including antique and modern and can source plenty more if interested. I also have holsters for antiques available! Check my ads for more. Antiques were made before CNC machining, meaning there can be slight variation between different examples of the same model. Grips may be slightly oversize allowing them to be ground down to size, slightly undersize, or require minor adjustment of the interior face or grip peg hole to fit just the way you want. I can also get plenty of butt plates for shotguns and rifles. Inquire to see if I can help you. Also reach out if you need a leather holster to protect your revolver. Price starts at $100 per grip pair with shipping anywhere in Canada, discounts for bulk order possible. Current stock includes: Colt 1873 Single Action Army / Peacemaker ivory-like Colt 1877 Thunderer/Lightning .41 Colt SAA faux bison White & Black Webley Mark 1 (Mk I) for .455, .45 ACP, and .45 auto rim service revolver White & Black Webley Mark 2, Mark 3, Mark 4, Mark 5 (Mk II, Mk III, Mk IV, Mk V) for .455, .45 ACP, and .45 Auto rim service revolvers Smith & Wesson No. 3 New Model for .44 single action revolvers Smith & Wesson No. 3 Russian ivory-like for .44 Russian single action revolvers Smith & Wesson DA .44 I can source most grips and butt plates for makes of pistols and long guns such as Beretta, Benelli, CZ, Colt, Forehand & Wadsworth, Harrington & Richardson (H&R), Hopkins & Allen, Ithaca, Iver Johnson, Luger, Marlin, Mauser, Pietta, Remington, Ruger, Springfield, Savage, Sig Sauer, Smith & Wesson, Stevens, Tokarev, Uberti, Walther, Webley, and more.

categories:Sporting GoodsGuns

47943 impressions

918 views

Streamlight TLR-1® GUN LIGHT (NEVER OPENED) Rail-Mounted Tactical Weapon Light Part Numbers List * 300 lumens; 2.5-hour run time; 12,000 candela peak beam intensity * Powered by two (2) 3-volt CR123A lithium batteries * Rail grip clamp system securely attaches/detaches quickly and safely with no tools * Includes keys for GLOCK®-style rails, MIL-STD-1913 (Picatinny) rails, Beretta® 90two, Smith & Wesson® SW99, and Smith & Wesson® TSW * 6000 Series machined aircraft aluminum with black anodized finish * Ambidextrous momentary/constant on operation * Highly accurate sight repeatability when remounting * Fits most existing light bearing holsters * 4.18 oz (118.6 g) * IPX7-rated design; waterproof to 1 meter for 30 minutes * Remote switches available as optional accessories (must be used in conjunction with 69130 remote door switch) * Assembled in the USA The silver band that encircles the head of the TLR-1® is a trademark of Streamlight®, Inc. We do not recommend carry of a TLR® equipped firearm without a proper holster. A proper holster should fully cover the trigger guard area, preventing accidental discharge of both the firearm and light.

categories:Sporting GoodsGuns

9769 impressions

641 views

Consignment sale: Selling/trading an Argentinean Mauser Model 1909 in 30-06 that was part of world renowned gunsmith Martin Hagn's personal collection. Has a 23" Hammerli barrel marked with Martin Hagn along the top. Metal work was done by Martin, colour case hardening was done by Turnbull Restoration, engraving done by MRM Engraving which includes all small parts including each individual screw head. Has a trap door grip cap which holds spare iron sights within it. Gold "Hagn" inlay ontop of the receiver, an inset pin at the tang commemorating his trophy bull harvested in Sweden, and a gold monogram on the underside of the butt. Stock work was also done by Martin and includes an ebony forend. Comes topped with its original iron sights as well as quick detach claw mounts with a Zeiss Diavaari 1.5-6x42mm scope with German #4 reticle. The rifle is in excellent shape inside and out with nearly no notable flaws. Looking for $24950 shipped. Insurance by request on buyer. Open to all trades. Can send more pictures upon request. Pm or text/call 204 795 2850 for more info.

categories:Sporting GoodsGuns

1060 impressions

95 views

For sale is an old break barrel Bentley London side by side rear hammer shotgun. 29" Damascus barrel. The gun is untested and is being sold as a wall hanger or project gun. Old barrels like these can be unsafe and should be checked by a gunsmith before using. The gun is in need of repair as it sits.The rear hammers don't hit the firing pins, there is a wood chip near the hammer are are swollen a little bit. See pictures. If you have any questions or would like more pictures feel free to call, text or email! +tax(we are a business, whatever tax is in your province) +shipping ( $ 60.00 BC, $ 65.00 AB, $ 75.00 all other provinces) Local pickup is available.
 250-753-3355 (Call or Text) 
Must have your PAL to purchase.

categories:Sporting GoodsGuns

1150 impressions

97 views

Selling/trading a Thompson Center Encore Pro Hunter 209x50 cal barrel. Overall it's in very nice shape. 26" stainless, fluted. The breach plug does not fully thread in properly as there's a small bulge where the breach plug was turned in too tight. It will need to be looked at by a gunsmith prior to being useable. The bore is in very Ince shape. Has a Weaver rail, no longer has its iron sights. Comes with a wood forend which has a few marks, nothing too major. Also comes with a matching cleaning rod. Given the imperfection at the brach it'll be sold as is with no warranty or guarantees. Looking for $350 shipped. Insurance by request on buyer. Open to all trades. Can send more pictures upon request. Pm or text/call 204 795 2850 for more info.

categories:Sporting GoodsGuns

1575 impressions

225 views

Mint Howa 1500 30-06 Stainless in a MDT Field Chasis that is CNC machined aluminum. It has a Leupold 20 MOA rail, Arken EPL4 4-16x44mm, Arken rings, MDT 3.715” AICS steel 7 round magazine , sling, ARCA rail and the gunsmith lengthened the factory freebore to accept longer bullets and be able fit more powder in the case as you can seat them out farther. Bipod and tripod are not included. This gun has been cleaned and oiled each time I’ve taken it shooting. I’ll include the original stock and magazine aswell. $1900 no trades 

categories:Sporting GoodsGuns

1600 impressions

121 views

Selling a BROWNING CITORI Has 251/4 inch barrels cut down by a professional gunsmith it has FIXED CHOKES MEASURING .732 has med and front bead has EJECTORS barrel selector single trigger stocks have no cracks or deep gouges minor scratches Great bush gun LOP14 1/4 inch's serial number 03059RRJB3  Asking 875$ shipping included. FIRED ABOUT 150 ROUNDS WITH OUT ISSUES must have pal Thanks for your time

categories:Sporting GoodsGuns

3156 impressions

411 views

Please text anytime 6476871484. Fully functional double action revolver in perfect ready to shoot condition. No PAL required. Test fired with smokeless powder. Comes with FRT paperwork. Reloadable ammo is available but sold separately. Colt M1889 "Navy" Double Action Revolver, .41 Long Colt, SCARCE 3-Inch Barrel​ This model is a marked departure from previous Colt revolver designs, and would be produced in a few variants from 1889 until 1907, with some 330,000 made. Many were sold to the US military. It has a counter-clockwise rotating cylinder with locking slots on the back. This one is in very fine condition with a scarce 3-inch barrel. It retains 100% of the nickel. Excellent, sharp markings, matching assembly numbers on all parts. Nice nitre-blue on the hammer and trigger. The action is crisp and strong, and the cylinder indexes and locks properly with no play on trigger pull. The bore is very fine and bright, with sharp rifling. The grips are very fine with no wear . SN 25842. History & Background This model is an important milestone in Colt handgun development, as it is the first American revolver with a swing-out cylinder mounted on a crane, a development which would become the standard for modern revolvers to this day. The 1889 cylinder mechanism was already "on the books" as early as 1880, based on designs of Colt engineers William Mason, C.J Ehbets and Horace Lord. It would take almost ten years for Colt executives to give the green light to manufacture this gun, and once it was available, the US government quickly took notice and ordered several thousand for the Navy. Colt adopted the name "New Navy" in honor of this order. The gun has an interesting counter-clockwise cylinder rotation and a locking mechanism which relies entirely on the two-pronged hand. The 1889 model would remain in production for 18 years. When it was first introduced in 1889, it met with no competition from the other major makers - Smith & Wesson were still heavily engaged in manufacturing top-break revolvers, and Remington only had their solid frame revolvers with removable cylinders to offer. It would take S&W another ten years before they had a viable alternative to Colt's design.

categories:Sporting GoodsGuns

5963 impressions

483 views

WINCHESTER 243 UNPRIMED UNFIRED BRASS, in older boxes from an estate. Selling gunsmithing business and related goods.

categories:Sporting GoodsGuns

3466 impressions

244 views

Luigi Franchi 48-AL 20Ga x3" 28" Ribbed Barrel Made in 1963 Semi-Automatic Finish on aluminum receiver worn Stock has been repaired - shown in photo Fully functional & inspected by gunsmith Stock # 26-0199 Please call or email if you have any questions or would like to purchase.

categories:Sporting GoodsGuns

3265 impressions

182 views

Antique status Swiss 1882 manufacturered by Waffen Bern. One of the most sought after antiques, this revolver is chambered in 7.5 Swiss ordnance which is still available from Fiocchi. This revolver is commonly used with .32 sw longs, although the cases may bulge. S&B .32 longs is not recommended as the case rims are smaller than normal and may cause light strikes, all other brands are functional. The revolver itself is in very good condition, lockup and timing are tight. The bore is shiny as most of these revolvers are. Bluing is in good shape. The gun comes with a custom western quick draw holster that is formed to the gun, with the standard right hand attachment point or the holster can be swapped to the left side for a reverse draw set up. Pick up available, shipping included with insurance on buyer. Good pistol for bushwhacking and ranch carry. The gun will also come with a copy of the frt and a hard case. Please inquire if you need more pictures. Cash or etrasfer only. No pal required, just proof of over 18 Please check with a gunsmith before firing any antique firearm for the first time

categories:Sporting GoodsGuns

4985 impressions

232 views

Winchester 1895 in .30 Army (30-40 Krag) Manufactured in 1915. Nice patina, good bore. Barrel previously cut, rear sight elevator missing. Should be examined by a competent gunsmith prior to shooting.

categories:Sporting GoodsGuns

3981 impressions

412 views

No name - .177 Break Open Single Shot Pellet Rifle Used in very nice shape. I test that they fire and will penetrate cardboard. No PAL required. I will ship anywhere in Canada for $65.00. All offers are considered. Standard Disclaimer, some items may not apply. The firearms and accessories I sell may be new or used, and are usually acquired through estate liquidations. I visually inspect them and check basic operation only, and share what I know or find in the description and photos. They are not live test fired. I provide full disclosure on what I find, but can not be held responsible for what I may miss. It is your responsibility to have your firearm inspected by a competant gunsmith before firing, shoot at your own risk. I am not a gunsmith. I do not warrantee these guns or any associated accessories, nor do I accept returns. They are, as is, where is, and all sales are final. On final purchase you have accepted full responsibility for the item. E-transfer or cash only. S/H & insurance are extra. Tracking number will be provided. I require your full name, PAL #, date of birth and email address for licence verification for firearms and ammuntion. Thanks, Darcy Darcy's Estate Liquidations

categories:Sporting GoodsGuns

3245 impressions

135 views

Pre-WW1 British Pattern 1821 Canadian Artillery Officer's Sword – no Scabbard Savage and Lyman Montreal Sword This company name was used by the Montreal silversmiths Savage and Lyman between 1868-1878. The left side of the blade immediately in front of the guard Is marked Savage & Lyman Montreal Within the engraving on the left side is a Crown.  Believed to be indicative of Queen Victoria. The right side of the blade has a small brass insert which says PROOF.  Wilkinson Sword introduced these Proof Discs in 1844. In the engraving on the right side of the blade is the word ARTILLERY The guard is steel and has fish skin wire bound grips with most of the fish skin having been worn away.   Length of Sword – 40 1/2” Length of Grip including the Guard – 5 1/2” Blade Length – 34 1/2”   Savage & Lyman Montreal (or Savage & Lyman and Company) were manufacturers and suppliers of swords, known for military pattern swords like those for Canadian militia units (e.g., 1st Battalion Chasseurs Canadiens), marking them as producers/sellers, though like many firms, they likely had blades forged elsewhere (perhaps by specialists like J. Martin in Montreal) and then finished, hilted, proofed, and sold by Savage & Lyman in Montreal, a common practice for armsmakers then.  Key Points: Evidence of Manufacturing: Swords clearly marked "SAVAGE & LYMAN MONTREAL" exist in museum collections, showing they were a recognized name in arms. Role: They functioned as an arms dealer and supplier, customizing and selling weapons for Canadian military and militia. Production vs. Supply: While they might not have forged every single blade from raw steel in-house, they were responsible for the final product, including proofing and adding their own markings, as seen on a 1885 Chasseurs Canadiens sword. In short, they were a key player in the Montreal arms trade, making/selling quality military swords, even if blade forging was sometimes outsourced to other specialized smiths.    $350.00 Or Best Offer   Thanks,  Phil

categories:Sporting GoodsGuns

10022 impressions

327 views

(THIS SHOTGUN IS NOT AVAILABLE ANYMORE - IT HAS BEEN SOLD) Ad Title: Lakefield Mossberg, Model 400G, Cal. 12 2/4” & 3” Make :  Lakefield Model: 400G Serial Number: 6619163 Type of action: Pump Action Barrel length: 30 inches Caliber: 12GA 2¾” & 3” Note: N/A Condition: Good condition. Blue on barrel and action is about 50%.  The bore is very nice. The wood is in good condition. The stock was cracked on each side as can be seen in the pictures. The stock was restored by a gunsmith who inserted nails inside the stock (which are not visible from  the outside.). The gunsmith stated that the stock should now be as solid as it was before being cracked. It should be a good hunting shotgun. Permit: PAL required Price: $185.00 Cdn Ref:  25A114 Shipping: $40 in Canada Basic Insurance: $100 included with all purchases Full insurance: Add 2% of the value of your purchase to get full coverage Payment: By E Transfer

categories:Sporting GoodsGuns

2363 impressions

325 views