RBSC F L die set 30-06.Brand new. Shipping is not included.

categories:Sporting GoodsGuns

29762 impressions

1622 views

Looking for a rear sight for a mini 14. The one seen in the photos..

categories:Sporting GoodsGuns

4938 impressions

181 views

Hogue Monogrip revolver stock Features: Original one-piece MONOGRIP design eliminates side screws and loose shifting panels. Hogue's famed orthopaedic hand shape with finger grooves and compound palm swells. Fully relieved for all speedloaders. Cobblestone texture provides an efficient non-slip, non irritating stippling pattern. Hogue rubber Monogrips feel soft and resilient in your hand, yet are moulded with a reinforcing insert directly engaging with the gun frame to a rock solid grip-to-frame fit. Moulded from modern durable rubber which is virtually impervious to all oils and solvents found around firearms. Demo video: https://youtu.be/cEC1pVFRRuk Installation video: https://youtu.be/OhN3ByfnDM8 Pickup GTA Ship on buyer

categories:Sporting GoodsGuns

5482 impressions

520 views

ANSCHUTZ 22 LR RIFLE BOLT ACTION COMES WITH 0NE MAGAZINE. EXTRA MAGAZINE $ 85 DEADLY ACCURATE BEAUTY!

categories:Sporting GoodsGuns

10574 impressions

1443 views

Brand new New Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts. The SCP-4006 is designed for use on Picatinny rails and features one classic ring and one interface ring, which can be rotated as to position the interface/accessory in either the 12-o'clock or 3-o'clock position. The SCP-series of mounts can also be rotated for left or right handed shooters, and feature two separate side clamps. 0 MIL/0 MOA Height: 34 mm/1.35” Length: 108 mm/4.25” Weight: 154 g/5.4 oz 10-degree wedge included Note: Will not fit the SAKO S20 or rifles with 2-piece rails

categories:Sporting GoodsGuns

11217 impressions

394 views

8 box of 50 Brass 32S/WLong, new Winchester with Primer 125.00 + shipping 2 box of 500 bullet lead cal.32 Hornady HBWC .314, 90 gr. ,150.00 + shipping

categories:Sporting GoodsGuns

13758 impressions

1608 views

-Browning trombone .22 pump with a vintage Weaver G4 fixed power scope -Manufactured in Belgium from 1922-74. -only 150,000 units were sold in 50 years. - low serial number 41290 means the approximate date of manufacturing could be around the 1930’s. -stock is NOT cracked from slam firing! (See pictures) (Always look for stock being cracked where it meets metal. That is typical of these rifles especially older ones. Slam firing is where you hold the trigger down while pumping the action and it fires with each pump.) This one has not been wrecked by slam firing. -shoots s, l and lr. -hamnerless -cross bolt safety -take down version -for its age the wood and blueing are excellent.

categories:Sporting GoodsGuns

3610 impressions

188 views

French Model 1874 T Back Sword Bayonet for use on the 11mm M1874 Gras rifle Manufactured at the French State Arms Plant of Tulle in August 1878 The Gras was the last of the French sword type bayonets and was manufactured from 1874 until about 1885. The Bayonet and Scabbard have matching Serial numbers 96363 The left side of the guard is engraved with what looks like half a written L and the numbers 96363.  The scabbard has the same mark and numbers on the left side. Above the number on the guard are 2 diamonds each with the letter B in them. The front of the guard just above the top of the blade has the letters L and P The pommel has the number 2 stamped inside at the base along with other stamps I have not identified. The top of the tang has what looks like a C6 stamped in it. The back of the blade is engraved with M d’Armes de Tulle Aout 1878   The Spring Lock works as designed.   Overall Length – with blade in scabbard  - 25 7/8” Length of Bayonet – 25 3/8” The blade has never been sharpened. Length of Grip including the Guard – 4 3/4” Blade Length – 20 3/8”   $200.00   Thanks, Phil

categories:Sporting GoodsGuns

6870 impressions

261 views

I have a collection of drilling jigs, tools and parts for the building of black powder muzzleloaders: a left hand L & R flintlock lock, L & R single set trigger, tang bolts, lock bolts, eschutceon pins, tang bolts, inlays, slotted wood screws, brass and German silver inlay wire, brass side plates and castings, pistol trigger guard, trade gun buttplate, and other numerous small items. Priced out; everything would cost over $800.00

categories:Sporting GoodsGuns

3872 impressions

205 views

Caliber: .223 cal (1/2″x 28 thread) Material: AISI 4140 steel Treatment: Black Nitride Reduces recoil and muzzle rise Includes crush washer Dimensions: 2.5” x 0.85” (L × Diameter) Weight: 2.6 oz (1/2″ version)

categories:Sporting GoodsGuns

6222 impressions

229 views

Czech K98k in 8x57 Manufactured after WWII at Brno factory.The L serial block id makes it 1946-1947. All numbers matching except the safety and cocking piece were numbered when factory was reusing some old parts. Matching number laminated stock. This is the K98k that was the predecessor to VZ24. It has the typical rampant lion crest. Turned-down bolt handle. Very clean example. Excellent shape. No rust. Value is $1600-$1900 condition depending. This one is very clean in excellent+ condition. Price is $1600 obo. Located in Calgary. Will ship within Canada. Buyer pays shipping. Valid PAL and gun transfer reference number will be required.

categories:Sporting GoodsGuns

10634 impressions

1013 views

Best realistic offer or trade for powder/ 20g components Pacific Reloading Bushings – Powder (15 pcs) + Shot (9 pcs, incl. brass) Description: Selling a mixed lot of original Pacific reloading bushings for shotgun shell presses. • Powder bushings (15 pcs): Letters X, L, AA, N, P, Q, M, W, Y, Z and numbers 456, 501, 534, 438, 492. • Shot bushings (9 pcs): Ranging from 3/4 oz up to 1 7/8 oz, includes one brass bushing. All in good, clean used condition. Pickup Edmonton or ship Shotgun , reloading

categories:Sporting GoodsGuns

5170 impressions

327 views

B l r two forty three liver action

categories:Sporting GoodsGuns

6525 impressions

802 views

Full brick of Cci large rifle mag primers. Have a couple bricks for sale. Call or text, l can ship on your dime.

categories:Sporting GoodsGuns

6482 impressions

763 views

Kolpin Stronghold Gun Boot L and Kolpin Stronghold Auto-Latch Mount System to attach to any Off- Road Vehicle . Secures scoped rifles and shotguns up to 52” in length. Only used once! Cash only!

categories:Sporting GoodsGuns

5409 impressions

505 views

L Lapua 338 Magnum.

categories:Sporting GoodsGuns

24349 impressions

819 views

Laser sight, L 45, Used but very few used for short period Dot size 3inch at 100yard, Batteries 2 (9V) Red Laser with cable swich Picatinny Weaver mount $400. +shipping ( USA sell it Used for 1750.00 us. )

categories:Sporting GoodsGuns

12036 impressions

1040 views

2) Ithaca High Standard Elevator - .850" W x 1.00" L - $30 . 3) Elevator X - .104" W x 0.89" L - OAL = 1.65" - $35 . 4) Cooey Elevator - .075" x 1.21" - $15 . 5) Husqvarna Elevator - $45 . 6) Marble Double Step - Rifle Elevator - $35 . 7) Marble Double Step - Carbine Elevator - $35 . 8) Marlin Elevator M1 - Marlin S-25 Sight - .046" W x 1.60" L - $35 . 9) Marlin Elevator M2 - Marlin S-25 Sight - .055" W x 1.60" L - $35 . 10) Marlin Elevator (336 - 1894 - 1895) - .115"W x 1.43"L - SOLD . 11) Marlin Early Fishhook Elevator- .075" W x 1.22" L - $35 . 12) Marlin Elevator - Marlin S-27 Sight - .095" W x 1.15" L - SOLD . 14) Remington 98 1/2 Sight - 105 Elevator - Round Barrel Model 12 Rifles - $45 . 15) Remington "R" Elevator (701 1/2) - .057" W x 1.11" L - SOLD . 16) Savage Folding Sight Elevator - .061" W x 1.13" L - $40 . 17) Savage Fishhook Elevator - $40 . 18) Savage 1899 Elevator - .095" W x 1.05" L - OAL = 1.27" - SOLD . 19) Savage 99 Elevator - .095" W x 1.15" Lo - $40 . 21) Savage 24 Elevator (Replacement Style) - SOLD . 22) Win Early Elevator - $40 . 23) Winchester 1A Elevator - dated (.207") - $60 . 24) Winchester 1B Elevator - dated (.162") - $60 . 25) Winchester 1C Elevator - no date (.175") - $60 . 28) Win 2C Elevator - .60"W x 1.625"L - $35 . 29) Winchester 3C - 6S Elevator - $50 . - . 31) 6-48 Filler Screws (4) - Blue $20.00 . 32) 6-48 Pan Head Filler Screws (4) - Blue $20.00 . 33) 6-48 Filler Screws (4) - Stainless $20.00 . 34) 8-40 Pan Head Filler Screws (2) $20.00 . 35) DT-1 - 3/8" DT Filler - Blue - Curved Top - $45.00 . 36) DT-2 - 3/8" DT Filler - Stainless - Curved Top - $50.00 . - . 40) Husqvarna Front Sight Hood - $85 . 41) Marlin pre 72 Round Front Sight Hood - $45 . 42) Marlin post 72 Front Sight Hood - $60 . 43) Sako - Finnwolf Hood - $85 . 44) Browning (Japan) BLR - BAR Front Sight Hood - SOLD . 45) Parker Hale Front Sight Hood - $85 . 46) Browning (Belgium) Safari Front Sight Hood - $85 . 47) Winchester Model 9422 Front Sight Hood - $40 . 48) Winchester post 64 Model 94 Front Sight Hood - $40 . 49) Winchester pre 64 Model 94 Front Sight Hood - $40 . 50) Winchester Model 70-88-100-64-65 Front Sight Hood - $40 . 51) Winchester post 64 Model 70 Front Sight Hood - $75 . 52) Winchester post 64 Model 70 Front Sight Hood (Long) - $85 . 53) Winchester (97 Sight - Model 69) Front Sight Hood - $75 . ---- . DO NOT USE THE MESSAGING SYSTEM ! . Phone Calls - 403-885-2149 (No Cell Phone so No Texting) . E-mail - slc6546@gmail.com . Click on my name "Jack Daniels" to see my other ads

categories:Sporting GoodsGuns

229387 impressions

3021 views

Long story short, I’m very impulsive and went all in for the sport, only to use it all once. No longer have the time for the hobby so I’m just trying to recoup some of the money spent. All together retails for $1100 + tax, will consider reasonable offers but not in a rush to sell. Also have some “extras” for sale separately. Pick up in Fort Saskatchewan. Take it all for 800 obo G3 Combat pants (34) & Shirt (L) Dye I5 mask with carry bag and extra lens Yakeda Tactical Vest Tactical Gloves (XL) Double Eagle Metal M4 w quick change spring, 3 mid cap mags, 2 batteries, speed loader, foregrip.

categories:Sporting GoodsGuns

5275 impressions

660 views

Up for trade, 9 ton gas log splitter, less than an hour use, retailing at Canadian Tire for 1199.99 Husqvarna 562 chainsaw with 18 inch bar, running flawlessly and loves to cut Retails around 1199.99 ..sometimes more..sometimes less Cabelas 80 L commercial dehydrator Same as new.. immaculate ..flawless. 699.99 today at Cabelas I'm looking to trade the lot or partial...for: Chiappa Alaskan Takedown, Ridgerunner, etc in 45/70 or 44 Mag Browning BLR, stainless in 270 wsm, preferably takedown model. Most Sako in 270 wsm, or Sako Black Bear or Battue or Similar Tikka in 30/06 etc Over/Under 12 Gauge with removable chokes and 3 if not 3.5 inch capacity. Beretta, Winchester, Browning preferred Will look at the right Churchill Semi auto 12 gauge with 3.5 inch capacity Love coach guns and 28 gauges and .22s and well setup 22 250s Not interested in pumps, bolts other than those mentioned, singles etc What do ya have guys? Thanks

categories:Sporting GoodsGuns

69910 impressions

2405 views

Lantec Dragon Muzzle Brake Sig MPX ***$200 shipped*** NIB Also available Lantec MPX Break 9mm ***$200 shipped*** Manufactured to the highest quality standards and featuring a patent pending design, the LANTAC DGN762B™ Muzzle Brake offers improved recoil management and muzzle rise over competitors products. Its unique Short Energy Pulse system reduces length of recoil so that repeating shot energy cannot overlap and knock the shooter off target. Full auto fire is possible with massively reduced recoil and muzzle climb, meaning that all shots fall on target. SPECIFICATION: Caliber: 7.62X51mm / .308 Material: Hardened Milspec Steel Finish: Black Nitride QPQ Dimensions: L: 2.660'', DIA Body: 0.866'', DIA Fins: 0.900'' Weight: 2.8oz Thread: 5/8-24 UNEF R/H Serial Numbered for Quality Control Comes with appropriate crush washer.

categories:Sporting GoodsGuns

13353 impressions

740 views