Scope is Nikon Prostaff 3-9x40, a few dings from hunting as shown, 18 inch barrel, bore is excellent, no issues. Drop floor mag. Missing part of front sight. Clean and tested, functions as it should 100%. Please use cell phone text messaging. Courier Shipping, if needed, at your cost. If you have a hunting firearm you would like to "trade in" and if you can drive to me, ( Innisfail, Alberta, just south of Reddeer) I will consider your in person (only, no exceptions please) trade ins . For quicker response : Please call or text 403 556 0086 Please see my other ads. I have lots of rifles, shotguns, Scopes / ammunition / slings / cases etc available for extra. I can mount and bore sight for you too. PAL verification required. NO COD, cash or e transfer payment needed. Return customers / locals always given preference.

categories:GunsSporting Goods

24465 impressions

1167 views

  Now that I'm in my late 70's , I am downsizing my antique gun and militaria collection to move into a much smaller house with a much smaller gunroom.......offering an original 1880's Mills pattern , woven ammo belt with a rare 1881 Patent Mills/Orndorff brass buckle and retainer. The loops hold .40 to .45 caliber rounds and included are twenty .44-90 Sharps bottleneck cartridges. Please view the photos closely as the belt has been well used and has some damaged loops and earlier field repairs.....I have always refrained from doing any repairs or "enhancements" to my original antiques as the wear and tear is a natural part of its history and character. The cartridges are not original but are repro brass which was purchased about 45 years ago and which I loaded with black powder and some very old primers which were purchased about 50 years ago ( used for display purposes only ). The belt and attached buckle were purchased by me in 1967 at an Ohio gun show. The brass buckle has that beautiful patina which only time can create and it does have a few dents from honest wear and tear.....contact me if you interested and need more photos, or different angles, as the website only allows 10 photos. This is a rarely encountered ensemble.    I am willing to ship at "BUYER'S EXPENSE" but it will need to be by a trackable and insured method, or I offer local pick up --- OF COURSE I CANNOT SHIP THE BLACK POWDER CARTRIDGES WITHOUT REMOVING THE POWDER AS THEY ARE CLASSED AS EXPLOSIVES.......THIS COULD BE POSSIBLE AS I HAVE NEVER CRIMPED MY SHARPS CARTRIDGE RELOADS WITH PAPER PATCHED BULLETS. I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery.            

categories:GunsSporting Goods

1682 impressions

84 views

NEVER USED...... received as a Christmas gift many years ago ( very much appreciated ) but never used , as it was never part of my BP cartridge shooting regimen, which always worked just fine as it was. Note the rubber sealing ring.....good Buffalo Arms quality item.....total length approx. 19 1/4 inches. I am willing to ship at buyer’s expense , or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery.  

categories:GunsSporting Goods

14084 impressions

559 views

Modified SKS, action is beaded,  see trough scope base, with bushnell scope, stock extended plus recoil pad added. Early production,  see low serial number.  Only magazine not matched,  like all skses. No any stamp or mark on reciver cover, can not tell is a tula or izzy made. Spring loaded firepin,  rifling very sharp. Way better then late production. Test fire by self 60 rds, no any issue.  Cleaned completely.   Don't need remove a scope base for  take a part completely.  Cell 306 620-34-53   Shipping available for extra cost.  Pal verification required. 

categories:GunsSporting Goods

387 impressions

28 views

1) Remington No. 701 Rear Sight w/ Elevator $75.00 6) Remington Dovetailed Front Sights $75 - $85 7) 6-48 Filler Screws (4) - Blue - $20.00 8) 6-48 Pan Head Filler Screws (4) - Blue - $20.00 9) 6-48 Filler Screws (4) - Stainless - $20.00 10) 8-40 Pan Head Filler Screws (2) - $20.00 11) 3/8" DT Filler - Curved Top - $45.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

20578 impressions

484 views

1) Cooey Front Sight - $60.00 2) Cooey Rear Sight (99%) - $60.00 . 3) Cooey Early Rear Sight (99%) - $60.00 4) Cooey Swivels - $30.00 5) Cooey Elevator - $15.00 each 7) 6-48 Filler Screws (4) - Blue $20.00 8) 6-48 Pan Head Filler Screws (4) - Blue $20.00 9) 6-48 Filler Screws (4) - Stainless $20.00 10) 8-40 Pan Head Filler Screws (2) $30.00 11) 3/8" DT Filler - Curved Top - $45.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

100041 impressions

6536 views

1) Husqvarna Rear Sight Ramp & Elevator - $145.00 2) Husqvarna Elevator - $45.00 3) Husqvarna Front Sight Hood - SOLD 5) 6-48 Filler Screws (4) - Blue $20.00 6) 6-48 Pan Head Filler Screws (4) - Blue $20.00 7) 6-48 Filler Screws (4) - Stainless $20.00 8) 8-40 Pan Head Filler Screws (2) $20.00 9) 3/8" DT Filler - Curved Top - $45.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

61942 impressions

3049 views

1) Savage 99 - Front Sight - Bronze - $110.00 4) Savage 1899 Rear Sight (FT) & Elevator (98%) (Stamped Pat Pend) - $165.00 6) Savage 99 Rear Sight (Early FT) & Elevator (95%) - $135.00 7) Savage 99 Rear Sight (Later FT) & Elevator (95%) - $145.00 8) Savage 99 Rear Sight (Semi- Buckhorn) & Elevator (95%) - $165.00 9) Savage Folding Rear Sight & Elevator - $145.00 10) Savage Flat Top Rear Sight (Reproduction) & Elevator - $75.00 13) Savage 25B Windgage Rear Sight (some pitting) - $90.00 14) Savage Folding Rear Sight & Elevator - $145.00 16) Savage 99 Rear Sight Elevator - $40.00 17) Savage 1899 Rear Sight Fishhook Elevator - $40.00 20) 6-48 Pan Head Filler Screws (4) - Blue - $20.00 21) 8-40 Pan Head Filler Screws (2) - Blue - $20.00 22) 3/8" DT Filler - Curved Top - $40.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

81496 impressions

4471 views

Lightly used Has some attachments Ati folding stock build Comes with 4 mags, 2 boxes of ammo, and original parts. Will only meet at gun range or police station.

categories:GunsSporting Goods

589 impressions

66 views

Looking for Remington 788 any calibre or condition,, also any parts sights etc

categories:GunsSporting Goods

2467 impressions

122 views

Non-Restricted rifle Remington model P17, .30-06 bolt action, w/ bbl length 24" [Blued barrel and receiver. Fixed front, no rear sight. Fitted with Universal 4X32 scope. Sporterized wooden Monte Carlo stock with aluminum butt plate. Fitted with sling mounts. Marked NOT ENGLISH MAKE, logo with crown and BM on left side of receiver. Other markings include .30/06 NITRO PROOF etc. on barrel, BM logo on bolt but no serial number seen. Parts gun as receiver has a crack by the nitro proof marks. Bluing worn in use and handling areas. Two drilled and tapped holes on right side of receiver with corresponding notch removed on stock, presumably from once attached rear peep sight. Handling and storage marks on wood and metal. CFP/RCMP courtesy of Bill C-71 require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Sections 99 & 101 of the Criminal code

categories:GunsSporting Goods

40390 impressions

2769 views

Siderlock Safety Trigger Kit. Designed to fit Glock Gen 1-4 Models: G17, G17L, G18, G19, G29, G29SF, G20, G20SF, G21, G21SF, G22, G23, G24, G25, G26, G27, G28, G30, G30S, G30SF, G31, G32, G33, G34, G35, G36, G37, G38, G39, G40, G41, G42, G43X, G47, G48. Does Not Fit: Gen 5 Models. Siderlock Safety Trigger's Help Prevent Accidental Discharge!! The Glock pistol has a combination of three automatic safety features (trigger safety, firing pin safety and drop safety), which are sequentially disengaged when the trigger is pulled. The central pivot of the trigger is the first safety mechanism to disengage when the trigger is pulled and therefore the most important. The safety pin of the Siderlock trigger is a precise positioning system and when engaged blocks the movement of the central pivot avoiding an accidental discharge of the weapon. The Siderlock trigger offers the option of keeping the pistol in its original firing configuration simply by not engaging the lock. The Siderlock concept is simple: With a push on the safety pin a sliding pin acts to block or release the movement of the central pivot of the trigger, where by avoiding an accidental discharge when the slide is in the block position, and behaves exactly as the original Glock trigger when in the release position, all the while maintaining the original manufacture specifications. Once the Siderlock trigger is installed on the pistol, firing is accomplished by sliding the safety pin to the left prior to pulling the trigger. Preventing firing is obtained by simply sliding the safety pin to the right (Right hand Shooter assumed). For left-handed shooters, simply remove and invert the safety pin using the tools and instructions provided with the Siderlock trigger. No matter which position the slide is in it never extends beyond the trigger guard, avoiding any accidental contact with the holster ether inserted or withdrawn. Siderlock adheres to the same high manufacturing standards as Glock, using only high quality materials, a simple design and construction process, and therefore is guaranteed for life. Features: Replaces factory trigger. Adds an extra measure of safety. Avoids an accidental discharge. Maintains Glock original specifications, and fits all Glock Gen 1-4 models. Easy installation, includes detailed instructions and images. Ambidextrous and dismantled. High quality materials. Does NOT fit Gen 5 Models. See our complete line of Glock Products here Note: NDZ always recommends any part be installed by a qualified and trained gunsmith. NDZ promotes the use of safety practices and gear when working on any firearm. DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. Proposition 65: Click for Proposition 65 Warning Product Features Manufacturer: Siderlock Type: Trigger Safety Accessory Model: Safety Trigger Country/Region Of Manufacture: Made in USA Color: Black For Gun Make: Glock For Gun Generation: Gen 1-4 For Gun Model: G17, G17L, G18, G19, G29, G29SF, G20, G20SF, G21, G21SF, G22, G23, G24, G25, G26, G27, G28, G30, G30S, G30SF, G31, G32, G33, G34, G35, G36, G37, G38, G39, G40, G41, G42, G43X, G47, G48 Does Not Fit: Gen 5 Models

categories:GunsSporting Goods

17325 impressions

453 views

Lee Enfield No: 1 Mark III 1938 GR1 Singapore SMTLE . 303 BRITISH 10 round Mag, full wood, swivels, bayonet lug with pig sticker bayonet included, rear brass butt plate with tool kit compartment, 2000m rear adjustable iron sight. Frame and butt stock medallion match. Mag number unreadable. Length: SMLE No. 1 Mk III: 44.57 in (1,132 mm) Barrel length: SMLE No. 1 Mk III: 25.2 in (640 mm) In late 1915 the Mk III* was introduced incorporating several changes, the most prominent of which were the deletion of the magazine cut-off mechanism, which when engaged permits the feeding and extraction of single cartridges only while keeping the cartridges in the magazine in reserve, and the long-range volley sights. The windage adjustment of the rear sight was also dispensed with, and the cocking piece was changed from a round knob to a serrated slab. Rifles with some or all of these features present are found, as the changes were implemented at different times in different factories and as stocks of parts were depleted. The magazine cut-off was reinstated after the First World War ended, and not entirely dispensed with in manufacturing until 1933. The SMLE Mk III* (renamed Rifle No.1 Mk III* in 1926) saw extensive service throughout the Second World War, especially in the North African, Italian, Pacific and Burmese theatres in the hands of British and Commonwealth forces. Australia and India retained and manufactured the SMLE Mk III* as their standard rifle during the conflict, and the rifle remained in Australian military service through the Korean War, until it was replaced by the L1A1 SLR in the late 1950s.The Lithgow Small Arms Factory finally ceased production of the SMLE Mk III* in 1953.

categories:GunsSporting Goods

38110 impressions

1492 views

Please text anytime 6476871484. Fully functional double action revolver in perfect ready to shoot condition. No PAL required. Comes with FRT paperwork. Reloadable ammo is available but sold separately. Tested with smokeless powder. Colt M1889 "Navy" Double Action Revolver, .41 Long Colt, SCARCE 3-Inch Barrel​ This model is a marked departure from previous Colt revolver designs, and would be produced in a few variants from 1889 until 1907, with some 330,000 made. Many were sold to the US military. It has a counter-clockwise rotating cylinder with locking slots on the back. This one is in very fine condition with a scarce 3-inch barrel. It retains original blue. Excellent, sharp markings, matching assembly numbers on all parts I can see. Nice nitre-blue on the hammer and trigger. The action is crisp and strong, and the cylinder indexes and locks properly. The bore is very fine and bright, with sharp rifling. The black plastic grips are very fine and undamaged. SN 25826, very fine overall. History & Background This model is an important milestone in Colt handgun development, as it is the first American revolver with a swing-out cylinder mounted on a crane, a development which would become the standard for modern revolvers to this day. The 1889 cylinder mechanism was already "on the books" as early as 1880, based on designs of Colt engineers William Mason, C.J Ehbets and Horace Lord. It would take almost ten years for Colt executives to give the green light to manufacture this gun, and once it was available, the US government quickly took notice and ordered several thousand for the Navy. Colt adopted the name "New Navy" in honor of this order. The gun has an interesting counter-clockwise cylinder rotation and a locking mechanism which relies entirely on the two-pronged hand. The 1889 model would remain in production for 18 years, with significant improvements in 1892, 94, 95, 96, 1901 and 1903. When it was first introduced in 1889, it met with no competition from the other major makers - Smith & Wesson were still heavily engaged in manufacturing top-break revolvers, and Remington only had their solid frame revolvers with removable cylinders to offer. It would take S&W another ten years before they had a viable alternative to Colt's design.

categories:GunsSporting Goods

1502 impressions

158 views

1) Browning Belgium BAR - BLR Folding Rear Sight (3/8" DT) - $195.00 2) Browning Belgium HP Rear Sight - 285.00 3) Browning Belgium Safari Folding Rear Sight with Base (2 screws - 7/8" C-C) - $285.00 4) Browning BLR Rear Sight - 2 screw - 9/16" C-C - $275.00 6) Browning - Sako Front Sight Base w/ Screws (0.75" C-C) - $75.00 7) 8) 6-48 Filler Screws (4) - Blue $20.00 9) 3/8" DT Filler - Curved Top - $45.00 10) Pachmayr 1" QD (Push & Turn - T Shaped) Swivels (2) - $150.00 per Set --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

95834 impressions

3630 views

1) Winchester pre 64 M94 - Carbine Blade Gold Beaded Insert - $95.00 2) Winchester pre 64 Model 94 - Front Sight Hood - $40.00 3) Winchester pre 64 Model 94 - Front Sight Beaded Insert - $75.00 4) Winchester pre 64 Model 94 - 22B Rear Sight - $350.00 6) Older Original 1A - 1B - 1C Elevators - $60.00 7) Winchester pre 64 Model 94 - 22G Rear Sight - $250.00 8) Winchester Model 94 - Rear Sight 3C - 6 Step Elevator - $50.00 9) DT-1 Marble's  3/8" Dovetail - Curved Top  -  $45.00 10) Winchester pre 64 Model 94 / 1894 - Saddle Ring Stud & Ring - $95.00 12) Winchester 1873 - 1892 Saddle Ring Staple (only) - $65.00 Screws 14) 6-48 Filler Screws (4) - Blue   $20.00 15) Win 1890-06-62 Tang Screw  - 40.00 16) Win 1894-1892-1873 PG Tang Screw - 60.00 17) Win 1876-1886 Tang Screw  -  40.00 20) Win 1894 (pre 64) Magazine Plug Screw Short - 35.00 21) Win 1894 (pre 64) Magazine Plug Screw Long -   35.00 22) Win 1894 (pre 64) Finger lever pin stop screw - 40.00 23) Win 1894 (pre 64) Link Pin Stop Screw - 40.00 24) Win 1894 (pre 64) Loading gate screw - 40.00 26) Win 1892 -1894 Forend Cap Screw (2) -  45.00 27) Win 1892 -1894 SRC Front Band Screw  - 40.00 28) Win 1892 -1894 SRC Rear Band Screw - 40.00 29) Win 1885 Low Wall Tang Screw - 40.00 30) Win 1885 High Wall Tang Screw - 40.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

127343 impressions

7742 views

1) Browning Belgian SA-22 Dove Tail Flip Down Rear Sight  -  $165.00 . 2) Browning Belgium T-Bolt Firing Pin  -  $100   . 3) Browning Belgian Original Gold Bead Front Sight   -  $85.00 . 4) Browning Belgian T-Bolt - Receiver Sight  -  $185.00 . 10) 6-48 Filler Screws (4) - Blue   $20.00 . 11) 3/8" DT Filler - Curved Top - $45.00 . --- . DO NOT USE THE MESSAGING SYSTEM ! . Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com . Click on my name "Jack Daniels" to see my other ads.

categories:GunsSporting Goods

72069 impressions

2602 views

190 rounds. 38 boxes of 5rnds LE127RS 1300fps Tactical slug. Hard to find. Low recoil. Very accurate out of my shotgun but don't need them anymore. Sorry no shipping. Local sale only. Not parting out. Price is for the lot.

categories:GunsSporting Goods

649 impressions

38 views

Brand New Leupold BackCountry Savage 10/110 Round Receiver 2-Piece 30mm Medium Matte Ringmounts. Part number 171114

categories:GunsSporting Goods

3053 impressions

125 views

Excellent condition for at least 70 year old! Made in pre-gun-serials era (About 1968) Mossberg & Sons 151K Semiauto in 22LR Both the metal parts and the walnut stock are in pristine shape Function smoothly Pickup GTA Ship on buyer

categories:GunsSporting Goods

3977 impressions

377 views

As photo shows, practically new Come with 1 Glock magazine All parts (except lower/upper), accessories and attachments are available. Msg me for the price of parts you want.

categories:GunsSporting Goods

3129 impressions

275 views