John Wayne and Jesse James collector replica revolvers. Guns are non-firing and are for display only. Made by Franklin Mint and are in mint condition. Looking to sell as a pair. Please phone if interested. Thanks

categories:GunsSporting Goods

327 impressions

42 views

Wanted 410 shotguns, Over/Under, lever action, double barrel, pump, revolver, hinged, or bolt action. Prefer older models and in good shape. No Turkish guns please. I’m Located in NW Edmonton and Available 7 days a week. Must be cheaper for cash. Please send pictures and asking price to 780-803-7501

categories:GunsSporting Goods

6975 impressions

452 views

WTB Hi everyone, As the ad say’s. I know there are some of these out there, so if you have one you want to sell, please message me. Condition not that important, but MUST be fully functional. Thanks!

categories:GunsSporting Goods

441 impressions

39 views

This book on Firearms Assembly is the NRA guide to pistols and revolvers. You can disassemble and reassemble with confidence. Text please. Buyer pays postage.

categories:GunsSporting Goods

14346 impressions

420 views

Very rare Remington model 1875 SAA in 44 Remington caliber. This revolver still retains about 75% of the original nickel two piece wood grips show typical ware but no chips or cracks. The action is very crisp and functions correctly with excellent timing and lock up., the bore shows typical black powder pitting, but lots of strong visible rifling This is an antique and you do not require a PAL to purchase this firearm. RCMP, FRT document included.

categories:GunsSporting Goods

45816 impressions

3168 views

Extremely rare Smith & Wesson No 3 chambered in 455 Eley with target sites and a 1-9/16 inch cylinder Was a special order. This revolver still retains about 75% of the original bluing it comes with a 7 1/2 inch barrel checkered walnut grips showing where but good condition no chips or cracks. The trigger set is amazing. This revolver is one of twelve ordered and shipped to Birmingham England in 1905, this revolver frame was produced prior to 1888 as documented and is considered an Antique status in Canada. Smith & Wesson factory letter included. PAL not required

categories:GunsSporting Goods

68394 impressions

4102 views

Very nice original condition Merwin and Hulbert seven shot revolver, this revolver is chambered in 32 H&R caliber. This revolver still retains over 95% of the original nickel finish, the two piece hard rubber grips are original and in excellent condition with no chips or cracks. it also features a folding hammer, and is in excellent mechanical condition with perfect timing and lock up. This is an antique and you do not require a PAL to purchase it. comes with RCMP,FRT document.

categories:GunsSporting Goods

21295 impressions

998 views

Please text anytime 6476871484. Fully functional antique revolver in mechanically perfect and ready to shoot condition ,very good action, no PAL needed. Reloadable ammo is available but sold separately Comes with FRT RCMP paperwork. Smith & Wesson 44 New Model No. 3 Top Break, .44 Special / Russian Revolver. This one is in very good condition with longer 1 9/16 cylinder and can shoot both .44 Special and 44 Russian ammo. The action is strong and accurate, and the cylinder indexes and locks properly. The bore of the 6.5-inch barrel is quite good, with strong rifling. The black hard rubber grips are good and undamaged. Mechanically in excellent condition with proper timing and lockup. The latch is also solid with zero play. Extractor works as it should. SN 10438, very good overall. History & Background Smith and Wesson's first double action design dates back to at least 1872 - years before Colt ever attempted a double action cartridge revolver. It was mentioned in a letter to the Russian envoy General Orlof, and although the sale to Russia never materialized, it served to pave the way for the very popular and successful line of double action top break revolvers. The .44 Russian model was actually the first to be produced as a prototype, and the last to be released for sale to the public. For this reason there exists a degree of confusion over the proper terminology: the first one to be manufactured for sale was the .38 caliber model, followed by the .32. The .44 caliber model was not released until 1881, and is variably known as the No. 3 Double Action, the Double Action "Navy" (a name Daniel Wesson wanted to keep alive to differentiate this model from the No. 3 single action, and still holding out hope to sell it to the Russian navy), and the First Model Double Action. Originally, the .44 Double Action was made with a 1 7/16 inch cylinder, however an optional .44-40 version was available as of 1886. This required a 1 9/16 inch cylinder, and a longer frame. The firm soon realized that it was too expensive and cumbersome to manufacture two different sizes of frames for what was essentially the same gun, and the shorter cylinder and frame were dropped in favour of the longer one in the early 1890's. The No. 3 frame .44 double action top breaks were dropped from the Smith and Wesson catalogue in 1913.

categories:GunsSporting Goods

847 impressions

415 views

Please text anytime 6476871484. Fully functional double and single action revolver in perfect condition. Compact pocket revolver high quality and can fit in the palm of your hand.. No PAL required. Comes with FRT paperwork. Belgian "British Bulldog", .44 Webley CF Revolver and the cylinder compatible with 44 Russian. This one is in excellent condition. The nickel plating is intact with no flaking. The gun is marked "44" on the side. The cylinder shows the pre-1893 Belgian proof mark and post 1878 inspection marks. There are the initial "MV" stamped on the frame, which the mark of the foundry. The action is accurate and strong, and the cylinder indexes and locks properly without play. The bore of the 2 1/2-inch barrel is excellent and bright, with sharp rifling. The walnut grips are excellent and undamaged, with no wear. SN 5, excellent overall.

categories:GunsSporting Goods

1859 impressions

619 views

TR 410 shotgun 2 3/4 and 3” 410 gauge with 9.4” barrel Revolver double action With full flat top picatinny rail for customization of optics and sight Accessories Weight 5.6 lbs Choke interchangeable: cylinder Modified , full Telescoping stock with adjustable cheek rest 410 ammunition sold separately

categories:GunsSporting Goods

6000 impressions

488 views

Very nice fully functioning  double action 44 Russian revolver. The two piece hard rubber grips show  but no chips or   gun functions well both in single and double action. It has a 5 inch barrel. The  barrel shows light pitting but lots of strong visible rifling. This is an antique you do not require a PAL to purchase it but you must be over 18 years of age. RCMP, FRT document included.

categories:GunsSporting Goods

1364 impressions

198 views

Brand New Non Restricted Caliber: .45LC & .45 ACP (Moonclips), .410 shells Method of Operation: Double Action Revolver Length: 673mm, 26.5" Shots: 5 Sights: Brass Bead Barrel Length: 250mm, 9.8" Length of Pull: 343mm, 13.5" Weight: 2090g, 4.6lbs Coming with 2 moonclips

categories:GunsSporting Goods

1664 impressions

169 views

Have grips for Ruger revolvers, Mark series 22, Detonics factory rosewood (New), Derringer (German I believe), Hogue mono grip for S&W I believe and N frame S&W. Also grips to fit CZ 75/85 pistols with shipping extra.RUGER WOOD GRIPS AND SELF FINISHING GRIP HAVE BEEN SOLD Colt 1911 have colt logo and wood.

categories:GunsSporting Goods

29198 impressions

1707 views

Kimar 22 crimp blanks or 6 mm Blanks Revolver double action Good for dog training or sport competitions Or props Swing out cylinder and wood style grips Made in Italy New in box

categories:GunsSporting Goods

1504 impressions

188 views

Howdy Townpost. This is a nice little and fair conditioned pocket tip-up revolver, in .30 Rimfire. In the 19th century, XXX was used denote very strong malt liquor. So I think marlin was trying to market in the name that this is a stout little gun. Similarly done by Hopkins & Allen with the naming of their "XL" series of pocket revolvers. These were made by Marlin from 1873-1887 with a total of roughly 26,000 being made. They are essentially copies of the Smith and Wesson Model 1 1/2's and 2's. The mechanical condition of this firearm is excellent. The hammer and cylinder function reliably and as intended. Timing and lock up are excellent. The barrel is tight on the frame. This revolver was tuned by my gunsmith too. The bore is worn but there's some life left in it. There's frosting at the front of the cylinder and the forcing cone. The nickel is mostly present on the frame and the beautiful original rosewood grips are in excellent shape. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

6797 impressions

270 views

Howdy Townpost. This is a nice little and good conditioned pocket tip-up revolver, in .32 RF long. These were made by Marlin from 1875-1887 with a total of 33,000 being made. They are essentially copies of the Smith and Wesson Model 1 1/2's and 2's. The mechanical condition of this firearm is excellent. The hammer and cylinder function reliably and as intended. Timing and lock up are excellent. This revolver was tuned by my gunsmith too. The bore is worn but there's some life left in it. There's some frosting at the front of the cylinder and the forcing cone. The nickel is mostly present on the frame and the hard rubber grips are in excellent shape. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

6021 impressions

211 views

Howdy Townpost! I've got a nice little uncommon and good condition subcompact Remington for sale now! This started its life as a Remington Model 1865 New Model Police as a cap and ball percussion revolver in .36 caliber. Many of these were never percussion guns as they existed in a weird transition period. And Remington made some of them from the ground up as cartridge guns. This one most likely was in inventory as a percussion revolver and was turned into a .38 rimfire cartridge revolver based on the serial number, in my opinion. These are one of the more rare and lesser known Remington cap and ball guns that were made. Remington only made 18,000 between 1865 and 1873. So they are relatively uncommon and scarce gun today. This is actually my personal favorite model of Remington percussion revolver they're a very handy subcompact-sized gun by today's standards they're bigger and much more comfortable in the hand in the grip than the pocket models but nice and light unlike the full size military .44s and they point very naturally. This particular example is in very good condition the nickel is a very high percentage of coverage some of the original silver plate is still visible on the trigger guard and some of the low areas. The color case hardening is still very colorful and defined on the hammer (pictured). The grips have been refinished but they are the originals. The wood grain is very interesting and beautiful in my opinion. The bore is in excellent condition especially for a Civil War era black powder firearm. This was likely carried in a police officer's holster and not fired much. It was well taken care of and the clean and good condition bore and chambres are reflection of that. The the mechanical function of this firearm is excellent as well. When I got the firearm it was actually in amazing condition to begin with and the mechanical function was perfect. It locks up and times perfectly. The hammer and the trigger pull are very crisp, light and smooth. And didn't require any adjustment, Remington did the job and they did it right the first time. The entire revolver has been taken apart and given a gunsmith's cleaning and was reassembled and lightly oiled. I came across a nice little Hunter leather holster at a gun show and found that it fit this gun very well so it's included as a freebie with the gun (pictured). The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

5544 impressions

385 views

Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.

categories:GunsSporting Goods

11646 impressions

520 views

Howdy Townpost! I've got an Italian jewel for you to take a look at here. This is an Italian Bodeo model 1889. These guns are among my favorite antique revolvers. They are a very simple rugged and easy to maintain and repair Military revolvers with one of the coolest safety/loading systems as part of its design. These revolvers are very well designed, and feature the safety, loading/unloading system called the "Abadie System". This system was designed in Portugal, but many European late 19th century designs incorporated it. This particular example is an 1897 production by Glisenti at Brescia. Glisenti made Bodeos from 1891 to 1906. This is considered a tipo (type) A or an enlisted model. The type A had a folding trigger which was considered safer and was issued to enlisted men and the type B was the officer's model and had a trigger guard. This particular gun is considered a late model because it has an internal hammer block safety, which is dovetailed into the hand (pictured). The early model had a external hammer block safety that was prone to breakage. I've personally seen multiple antique examples with broken external hammer block safeties. So it was a good move from a design standpoint to change. The early models also were finished in the white in a similar manner to the French model 1873 Chamelot-Delvignes were. This example is of course blued like the overwhelming majority of the late models. This revolver is in excellent condition mechanically and has minimal wear overall. The grips are in excellent condition and we're refinished professionally. The chambres and bore are in excellent & minty condition as well. And the bore itself is one of the best I've ever seen on a Bodeo, with clean, sharp and shiny lands and grooves. This revolver chambres the 10.35mm Italian ordinance cartridge. This cartridge is very similar to .44 Russian but has a smaller diameter bullet (.422) and a slightly tapered chambre. I have seen these shot with .44-40 bullets that are .427 in diameter. These revolvers were loaded with smokeless from the get-go in 1890 using ballastite, a smokeless propellant. For an additional fee on top of the price I can have the chambres slightly reamed so that they will accept .44 Russian cartridges. That way you can buy an off-the-shelf ammunition without the need to hand load. However these are quite easy to hand load and source components for. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

6615 impressions

241 views

Smith & Wesson new model double action no 3 .This revolver still retains about 75% of the original nickel finish comes with a very nice set of pearl grips showing a little bit of were but no chips or cracks. The action functions very well in single or double action with good timing and lock up  still  lots of strong visible rifle but minor typical black powder pitting, it has a 6 inch barrel chambered in 44 Russian caliber  as well as a long cylinder , 1-9/16” This is an  revolver and you do not require PAL to purchase it. RCMP, FRT documents included.

categories:GunsSporting Goods

1498 impressions

234 views

Extremely rare Smith & Wesson double action favourite model.  approximately 1000 of these produced this one was sent to Berlin in 1887. This revolver still retains over 90% of the original nickel finish comes with a very nice set of pearl grips, the action functions perfect both in single and double action with excellent lock up and timing. Don’t miss an opportunity to own this extremely rare Smith & Wesson Antique. It comes with the RCMP, FRT document and the Smith & Wesson history letter. 

categories:GunsSporting Goods

1252 impressions

207 views