Siderlock Safety Trigger Kit. Designed to fit Glock Gen 1-4 Models: G17, G17L, G18, G19, G29, G29SF, G20, G20SF, G21, G21SF, G22, G23, G24, G25, G26, G27, G28, G30, G30S, G30SF, G31, G32, G33, G34, G35, G36, G37, G38, G39, G40, G41, G42, G43X, G47, G48. Does Not Fit: Gen 5 Models. Siderlock Safety Trigger's Help Prevent Accidental Discharge!! The Glock pistol has a combination of three automatic safety features (trigger safety, firing pin safety and drop safety), which are sequentially disengaged when the trigger is pulled. The central pivot of the trigger is the first safety mechanism to disengage when the trigger is pulled and therefore the most important. The safety pin of the Siderlock trigger is a precise positioning system and when engaged blocks the movement of the central pivot avoiding an accidental discharge of the weapon. The Siderlock trigger offers the option of keeping the pistol in its original firing configuration simply by not engaging the lock. The Siderlock concept is simple: With a push on the safety pin a sliding pin acts to block or release the movement of the central pivot of the trigger, where by avoiding an accidental discharge when the slide is in the block position, and behaves exactly as the original Glock trigger when in the release position, all the while maintaining the original manufacture specifications. Once the Siderlock trigger is installed on the pistol, firing is accomplished by sliding the safety pin to the left prior to pulling the trigger. Preventing firing is obtained by simply sliding the safety pin to the right (Right hand Shooter assumed). For left-handed shooters, simply remove and invert the safety pin using the tools and instructions provided with the Siderlock trigger. No matter which position the slide is in it never extends beyond the trigger guard, avoiding any accidental contact with the holster ether inserted or withdrawn. Siderlock adheres to the same high manufacturing standards as Glock, using only high quality materials, a simple design and construction process, and therefore is guaranteed for life. Features: Replaces factory trigger. Adds an extra measure of safety. Avoids an accidental discharge. Maintains Glock original specifications, and fits all Glock Gen 1-4 models. Easy installation, includes detailed instructions and images. Ambidextrous and dismantled. High quality materials. Does NOT fit Gen 5 Models. See our complete line of Glock Products here Note: NDZ always recommends any part be installed by a qualified and trained gunsmith. NDZ promotes the use of safety practices and gear when working on any firearm. DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. Proposition 65: Click for Proposition 65 Warning Product Features Manufacturer: Siderlock Type: Trigger Safety Accessory Model: Safety Trigger Country/Region Of Manufacture: Made in USA Color: Black For Gun Make: Glock For Gun Generation: Gen 1-4 For Gun Model: G17, G17L, G18, G19, G29, G29SF, G20, G20SF, G21, G21SF, G22, G23, G24, G25, G26, G27, G28, G30, G30S, G30SF, G31, G32, G33, G34, G35, G36, G37, G38, G39, G40, G41, G42, G43X, G47, G48 Does Not Fit: Gen 5 Models

categories:GunsSporting Goods

18635 impressions

497 views

Carcano Mannlicher 6.5×52mm Mod 91 Bolt Action with two 6 round Italian enbloc clips for each rifle. Condition as pictured which is average for the era. The rifle on top is older with. On adjustable iron sights. Bluing is mostly worn off and the stock has some wear and tear. Comes with 2 clips. 220$ The rifle on the bottom of the picture is in ok condition. The rear slide sight is adjustable to 1000m. Comes with 2 clips. 260$ No trades. CFP/RCMP courtesy of Bill C-71 require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Private sales do not require any information about the firearm. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Section 99 & 101 of the Criminal code. ANY ATTEMPT TO INQUIRE IF A PURCHASE CAN BE MADE WITHOUT A VALID AND CONFIRMED PAL WILL RESULT IN AN AUTOMATIC POLICE AND CFP CENTER REPORT. DON'T WASTE MY TIME WHICH MAY GET YOU TIME!

categories:GunsSporting Goods

36520 impressions

1295 views

Brand new  Pump action Non restricted Stock Type:  ATI Shotforce Top Folding Stock Magazine Capacity: 5+1 Caliber/Gauge: 12 Ga Sight: Bead Cross bolt safety Dual extractors Twin action slide bars Interchangeable barrels compatible with Mossberg 500 Barrel:  Smooth Cylinder Bore Barrel Length: 18-1/2″ Chamber Length: 3″ Overall Length: 39.5" Pull Length: 14" Weight: 6 lb Made in USA

categories:GunsSporting Goods

2743 impressions

128 views

**Still available if posted** Please include phone # and your email with communications as messaging replies don’t always get through. For quickest replies use text, use TownPost messaging with TownPost account or request my email. I have a brand new Browning X-Bolt Target McMillan A3-5 Ambush Rifle in 6.5 Creedmoor for sale. It’s a precision bolt-action target rifle in a Carbon Fiber McMillan A3-5 stock w/adjustable comb and with a stainless steel 26" fluted bull barrel with muzzle brake. Featured in Urban Carbon Ambush camouflage it’s got an 60 degrees bolt throw with an extended bolt handle, an adjustable feather trigger, 4 rd detachable clip, Pachmayr Decelerator recoil pad, 20 MOA Picatinny optics rail and bipod rail. I am the first owner of this new rifle but have not fired the rifle. **SEE MY OTHER RIFLE, RIFLE/SCOPE COMBO, SHOOTING AND HUNTING GEAR ADS** Valid PAL required, will come with transfer # as per new laws. First Paid, First Served. 
Holds only with deposit. Delivery Negotiable.
 Buyer pays for shipping costs and makes arrangements for payment. DESCRIPTION Browning X-Bolt Target McMillan A3-5 Ambush Rifle, 6.5 Creedmoor. Made to the high standards you expect from Browning, this quality X-Bolt Target McMillan A3-5 Ambush Rifle is chambered in 6.5 Creedmoor and comes equiped with numerous features. These features include the Carbon Fiber McMillan A3-5 stock with an ajustable comb, a free-floating fluted barrel with a muzzle brake on 5/8-24 suppressor threads, picatinny rail for bipod mounting, a gray stainless steel 26" bull barrel, an adjustable feather trigger, detachable rotary magazine, a urban carbon ambush finish and more. Included with this bolt action rifle is two quick detach swivel cups, a 20 MOA picatinny rail, and a glass bedded receiver with a matte blued finish. The McMillan A3-5 stocks are US Marine proven tough, and are proudly featured on these X-Bolt models. PRODUCT FEATURES - Carbon Fiber McMillan A3-5 Stock Marine proven tough, this premium Carbon Fiber stock comes with an installed adjustable comb, textured gripping surfaces, palm swell, a Pachmayr Decelerator recoil pad, and finished in an Urban Carbon Ambush. This stock is a variation of McMillan's famous A-3 stock but with the addition of an A-5 type butt hook on the bottom of the butt. The flat on the bottom of the hook is about 3/4" wide. This stock comes with a thumbwheel elevator system which allows for precise vertical adjustments. With the adjustable comb you can adjust and align your sight plane to match the scope - Decked out 26" Long Bull Barrel Manufactured from gray stainless steel, this free-floating fluted barrel includes a muzzle brake on 5/8-24 suppressor threads, a thread protector, and an embedded target crown - Extended Bolt Handle, Feather Trigger, and 20 MOA Picatinny Rail This ambush rifle includes a steel constructed, glass bedded receiver that features a matte blued finish, a 60 degrees bolt lift with an extended bolt handle, an adjustable feather trigger, detachable rotary magazine, top tang safety, and bolt unlock button. The X-Bolt's three-lever gold plated Feather Trigger provides a clean, crisp pull with no take-up or creep and minimal overtravel. Attaching the ideal scope or accessory is easy with the aluminum manufactured 20 MOA Picatinny rail as well attaching a bipod or light to the included bottom rail SPECIFICATIONS Model Code - 035451282 Action Length - Short Action Barrel Length - 26" Overall Length - 46" Length of Pull - 13 5/8" Weight - 10 lbs 0 oz Magazine Capacity - 4 Twist Rate - 7" Barrel Finish - Satin Gray Stock Finish - Urban Carbon Ambush Receiver Finish - Matte Blued Chamber Finish - Polished Barrel Material - Stainless Barrel Contour - Bull Stock Material - Carbon Fiber Recoil Pad - Pachmayr Decelerator Checkering - Textured Grip Panels Sling Swivel Studs - 2 QD Cups Receiver Material - Steel Trigger Finish - Gold Plated Bolt Slide Finish - High Gloss Magazine Type - Detachable Trigger Material - Alloy

categories:GunsSporting Goods

26227 impressions

972 views

Flip up green dot sight. Very compact. Intended for mounting to a 9mm slide recoil. Never used. Although I have mounted it to see if it would work for my intended purpose

categories:GunsSporting Goods

11181 impressions

490 views

TriStar Raptor Silver, 20 Ga, Semi-Auto, 26" Barrel, 4+1 Rnd, 3". $400 slide is jammed and I cant seem to get it unstuck. Stock is fractured but can easily be repaired. Can include a full case of shells for extra.

categories:GunsSporting Goods

5999 impressions

380 views

Includes everything pictured. Recently purchased in Dec. New condition. Shipping not available. Cash only The Umarex® GLOCK® Model 19 Fixed Slide BB Air Pistol is ideal for a more versatile role because of its reduced dimensions when compared to the standard sized option. The CO2 airgun replica of the GLOCK 19 in .177 calibre is compact and handy, with the unmistakable look of the original pistol and plenty of power. In spite of its relatively small length of 7-1/4", it fires .177 calibre steel BBs with a muzzle velocity of up to 410 FPS and weighs a satisfying 1.6 lb. In true Umarex replica form, it has a metal slide and a trigger blade safety. CalibreBarrel LengthOverall LengthVelocityMagazine CapacityWeight.1774-1/4"7-1/2"410 fps16 rounds1.6 lb.

categories:GunsSporting Goods

1455 impressions

81 views

Brand new  Pump action Non restricted Caliber: 12 gauge Chamber: 3" Capacity: 7+1,8+1,13+1 Barrel length: 20" Cylinder bore Full Length:  41″ Optic-Ready Weight: 7.25lbs Cycles 1.75”, 2.75” or 3” shells interchangeably No need for mini shell adaptor Redesigned Elevator, Bolt Slide and a new Energy-Absorbing Bumper Standard features include dual extractors, twin action bars, steel-to-steel lockup and ambidextrous safety Made in USA

categories:GunsSporting Goods

1685 impressions

85 views

These are custom made too order. See list below of "sizes" available. These can be printed in 10, 20, 50, 100, round boxes. Lots of colors available. The black printed boxes can have custom designs done using a galvo laser. These are $20.00 and up. Let me know what you are looking for and i will get you a price. These are printed on demand due to color choice, however can usually with in 24 hours. If you dont see your caliber listed just let me know which one you would like and we can create it for you. We have designed a new product for 50 cal ammo boxes. the boxes have slide tops and hold around 100 rounds per insert depending on the caliber. See updated pictures 9mm 40 S&W 45 AUTO 6.5 Creedmoor 243 WIN 5.56 270 WIN 308 WIN 300 BLK 8x51R 41 REM MAG 6mm ARC 6.8 REM SPC 224 Valkyrie 22-250 REM 450 Bushmaster 30-06 SPRG 38 SPECIAL 357 MAGNUM 10mm 223 REM 7.62x51mm NATO 30 Carbine FN 5.7x28mm 7.62x39mm 22 LR 350 Legend 17 HMR 22 WMR 44 REM MAG 45 Colt 6.5 PRC 6mm Creedmoor 300 WIN MAG 28 Nosler 7MM REM MAG 6.8 Western 380 ACP 300 WSM 8x57 mm Mauser 8x60 mm 7.5x55mm Swiss 6.5x55mm Swedish 357 SIG 30-30 WIN 9x18 Makarov 7x57mm Mauser 32 ACP 50 AE 32 S&W LONG 375 H&H Magnum 9.3x62 mm Mauser 300 PRC 7mm RSAUM 500 S&W Magnum 7.62x54R 45-70 GOVT 300 RUM 260 REM 22-243 44-40 280 REM 458 SOCOM 303 BRITISH 25-06 REM 280 ACKLEY 338 LAPUA 338 WIN MAG 220 SWIFT 32 French 7mm-08 Remington 9.3x74R 7x64mm 300 Savage 444 Marlin 35 Whelen 460 S&W Magnum 454 Casull 6.5 Grendel 270 WSM 8x68S 26 Nosler 300 WBY MAG 256 WIN 7mm PRC 25 ACP 222 REM 300 NORMA MAG 6mm Dasher 410 ga 22 Hornet 38-55 Win

categories:GunsSporting Goods

116048 impressions

1938 views

Brand new Non Restricted Caliber: 12 Gauge Overall Length: 29.5" Weight (unloaded): 9 pounds 12 ounces Barrels: 2 x 18 7/8”, chambered for 2 ¾” or 3" shells Chokes: Both barrels include spreader choke tubes with Tru-Choke thread pattern Capacity: 14 rounds in magazine tubes + 2 in chambers = 16 total  with indicator windows Action: pump action with two shots from single trigger, inline shell feeding Material: Patented polymer and aluminum frame Controls: Ambidextrous safety, ambidextrous pump slide release Grip: Co-Molded non-slip rubber pistol grip, composite front vertical grip Stock: Synthetic stock  Forend: Composite material with slots for MOE Rails Recoil Pad: Rubber with dual spring shock absorbing recoil mechanism Sling Points: Front sling attachment, sling swivel attachment on stock Part #: DP12GENIIBLK

categories:GunsSporting Goods

2370 impressions

116 views

Introducing an innovative solution for mounting optics to your pistol slide: The Versa Tactical SIGHTSECURE dovetail mount. Available for Beretta and for Glock. To purchase, head to this link: https://partsonly.ca/product/glock-dovetail-optic-mounting-kit/ This system allows the user to install an optic on a slide that does not have an optic cut. Made of a solid piece of 4340 steel, this mount will not bend or break. Has been extensively field tested with thousands of rounds fired. There are no moving parts, latches or other components to wear/break. Simply slide the Versa Tactical mount in the slot where your factory rear sight goes, and install the 2 expander screws. Then your optic is ready to go on! This mount allows for mounting of any industry standard RMR footprint optic. We recommend using a small amount of blue loctite for installation of all the hardware. Ensure the expander screws are inserted until flush and snug, but do not over-tighten! We recommend tightening of the optic mounting screws to either 14in-lbs or to your optic manufacturer's specification, whichever is lower. The Glock mount is compatible with the following models: 9mm – G17,G19,G26,G34,G45 10mm Auto – G20,G29 .357 – G31,G32,G33 .40 SW – G22,G23,G24,G27,G35 .45 G.A.P. – G37,G38, G39 .45 Auto – G21,G30,G36,G41 This Glock dovetail optic mounting kit will not fit and is not suitable for the Glock MOS models! The Beretta mount is compatible with the following models: M9 M9 Exclusive M9A1 M9A3 M9A3 Black M9 22lr 92 Fusion Black 92 Fusion Blue 92 A1 92 Compact 92 Compact w/ Rail 92 Compact with Rail Inox 92 Vertec Inox 92FS 92FS Fusion 92FS Inox 92FS Brigadier 92FS Brigadier Inox 92G 92G-SD 92G Elite 92X Centurion 92X Compact 92X Compact w/ Rail 92X Full Size 98A1 98FS 98FS Inox 90 Series Inox This mounting kit will not fit and is not suitable for the following Beretta models (including but not limited to): ANY Beretta Optics Ready Models 92FS Centennial 92 Performance 92 Performance Defensive 92 RDO Compact M9A4 Centurion Taurus 92 Color: Black Material: 4340 Steel Kit includes: 1x Versa Tactical SightSecure™ optic mounting plate for rear sight dovetail 2x Expander screws 2x Optic retention screws 1x HEX driver

categories:GunsSporting Goods

26889 impressions

1085 views

Description - Thread Protector with high temperature retaining O-Ring (up to 400°F) - Friction and Compression of the O-Ring retains the Thread Protector and prevents it from loosening off *Extreme rapid discharge will result in temperature exceeding 400°F and loosen the Thread Protector Shipping included in the price via Canada Post Letter Mail (untracked 5-7 Business Days). Tracked shipping (for an additional cost) available upon request. Brand: Created by Cay (Yes it's my original design) ___________________________________ What's Included - 1x Thread Protector 1/2"x28" - 1x Viton O-Ring Thread Protector Specifications - Material: AISI 4140 Steel - Finish: Knurled Matte Black Oxide (Blued) - Weight: 0.5oz (14g) - Dimensions: OD: 0.728" (18.5mm) / Length: 0.492" (12.5mm) - Weight: 0.5oz (14g) O-Ring Specifications - Material: Viton® Fluoroelastomer Rubber - Finish: Black - Max Temperature: 400°F (204°C) - Hardness: Durometer 75A (Medium) - Dimensions: OD: 0.591" (15mm) / ID: 0.472" (12mm) / Width: 0.060" (1.5mm) - Finish: Black *5/8"x24 coming soon Instructions 1. Check and make sure the firearm is unloaded. 2. Loosen off the stock thread protector or muzzle device in the counter clockwise direction. 3. Clean the thread (if necessary). 4. Install the High Temperature O-Ring over the threaded barrel. Do not overstretch the O-Ring, light pressure is sufficient the slide the O-Ring over the threads. 5. Install the Thread Protector in the clockwise direction. 6. Note that the Thread Protector can be installed in either directions. The smooth direction facing the O-Ring for more compression/friction or the cutout direction facing the O-Ring for a flush/clean connection. ***Video Instructions Coming Soon***

categories:GunsSporting Goods

17958 impressions

635 views

Selling/trading a Browning Superposed 12 gauge over under. Overall it's in nice shape. This is a pre-war gun made somewhere between 1931 an 1939 (SN 10###). 30" barrels with solid rib, 2 3/4" chambers, fixed chokes (not marked), ejectors, single trigger with safety on the tang not operable but a safety on the underside of the trigger that slides forward and back - this was a factory option that many guns were retrofitted with after 1937. Receiver was factory colour case hardened - the vast majority of which has faded but is still present on the underside of the release lever and on the inside of the action when the barrels are removed. Bluing on the barrels show very well with only light spots of fading here and there. Receiver has nice factory scroll work throughout. Straight English style stock. Wood is all in good shape, normal marks here and there. Has a hairline on the left side of the forestock which doesn't appear to be through the wood. The heel of the butt stock has a chunk out of it and a chip in the butt plate in the same spot. Lockup is tight, bores are in nice shape throughout. Overall a very nice shotgun. Looking for $1895 shipped. Insurance by request on buyer. Open to all trades. Can send more pictures upon request. Pm or text/call 204 795 2850 for more info.

categories:GunsSporting Goods

4081 impressions

256 views

Brand new with papers and carry bag, I have one large and one XL but can order different vests/ colours and sizes for you (even uniforms if you want) SHIPPING is okay.  Brand new with papers and carry bag Level 3A in front/back/neck/groin/sides Accepts standard SAPI hard plates Adjustable protection level and size Quick release and modern slide clips. Not visible in infrared VERY adjustable and will fit most people. Excellent protection  These are EXCELLENT vests and have all the most modern features that you’d want. The area of protection on these is spectacular and outclass the trendy minimal plate carriers which have proven to be useless in modern conflicts with shrapnel being the #1 concern.  I’m potentially open to trades or offers but the cost of a set of Kevlar from a store here is $900 ALONE! So getting a $1200 vest with Kevlar and peripherals (equivalents would be like $4000)  If your province requires a PAL to own I’ll need to see it. 

categories:GunsSporting Goods

1575 impressions

236 views

For sale is a Revolution Armory 20 gauge 3" youth pump shotgun, made by Lazer Arms Company of Turkiye. This is a black synthetic model with a 24" barrel. It comes with 5 choke tubes, cylinder, improved cylinder, modified, improved modified and full. It has seen 150-200 rounds of light target loads. It has some slight wear marks on the slide from pumping and nothing else.  This is the cheapest youth 20ga I could find and it shows. You need to pump it firmly or else it will not cycle properly and won't fire. I am sure the more it is shot, the more it will smooth out.  Looking for $400 OBO local sale or buyer pays full shipping.

categories:GunsSporting Goods

4852 impressions

300 views

Romeo1 Pro sig red dot. With shield Rarely been used and comes on a sig p226 slide with pre drilled holes if you want it

categories:GunsSporting Goods

4989 impressions

503 views

I have 1 large rifle ammo case (blue) and 2 small rifle ammo cases (black). Price is for EACH item, NOT FOR ALL ITEMS. Price is firm. No discounts. No trades. For pickup in northeast Edmonton off manning drive and 153 Ave NW. If shipping is required out of town, we can discuss that. If you are interested in seeing all that I have for sale please search here in townpost for "mellonRSCA". Please note that my list will be updated several times a week, so check back regularly. Thank you.

categories:GunsSporting Goods

2255 impressions

369 views

Boasting a spring-loaded front height adjustment knob, Caldwell’s Stinger Shooting Rest makes one-handed elevation changes a breeze. Non-marring front and rear moulded cradles protect your gun’s finish, while ensuring slip-free performance. Heavy-duty metal frame features cam locks so you can slide it back and forward to the perfect position, then lock it into position to fit any shooter. I bought it for 199.99 + tax at Cabellas https://www.cabelas.ca/product/96554 New condition, used only once. I will ship it on your dime Thanks

categories:GunsSporting Goods

3496 impressions

308 views

Ad Title: Stevens, Model: Gallery - No. 80, Slide Action, Cal. .22 Make : Stevens Arms & Tool Co., Chicopee Falls, Mass. U.S.A. Serial No: N/A Type of action: Slide Action Barrel length: 24 inches Caliber: .22 Short, Long & Long Rifle Note: This is a model rarely seen in Canada. Condition: Very good condition. No original blue left on barrel and action. The rifling is nice. The wood looks like it has its original finish. However, the stock has 2 cracks close to the action secured by a metal cap at the end of the action. I never tried it but looks to work properly. Price: $650.00 Cdn Ref: 25A007 Shipping: $50 in Canada Basic Insurance: $100 included with all purchases Full insurance: Add 2% of the value of your purchase to get full coverage Payment: By E Transfer

categories:GunsSporting Goods

13415 impressions

739 views

You must have an exemption letter and be qualified to buy this pistol license wise . Alien Pistol Semi Automatic 9mm. Gas operated Pistol not standard blowback. Regarded as a pistol advanced beyond other pistols the Alien has many features not available on standard handguns. Included is the full kit plus 4 magazines for a total of 7 magazines and a spare gas pistol system and parts kit. These kits sell to the USA for $5000 without extra mags or parts. Pistol has lowest bore axis of any pistol. That means the Bore is lower than the hand holding the pistol leading to minimal muzzle flip. The pistol features an standard pistol sight rail "irons" and a Sight rail with A Red dot designed for the Alien. The toolless exchange design requires the shooter only to press out a pin to exchange slides. The process takes less than 15 seconds. This pistol has been fired for a total of 500 rounds. By far the most accurate pistol I have ever fired in over 40 years. From the Laugo Arms website The Laugo Arms Alien Full Kit is the ultimate package for enthusiasts and competitive shooters. Iron Sight Top Rail and Optic Top Rail equipped with a Laugo Arms red dot sight are both included for maximum versatility. A magwell and Elornis Industries holster system complete the setup for optimal performance at the range. FULL KIT INCLUDES: Laugo Arms Alien pistol FINISH: Duotone Black / Green Three (3) 17 Round Magazines (10rnd Limited Capacity Magazines also available) Standard Fiber Optic Iron Sight Top Rail Optic Top Rail with Laugo Red Dot Sight Aluminum Magwell Elornis Holster and Adjustable Mounting System Cleaning Supplies Tool kit Dry-Fire Training Chamber Insert Custom Hard Case – Large Willing to take Gold and Silver Bullion on Trade. I don't have an exemption letter so I cannot accept trades of pistols. I am looking for a Winchester Deluxe 1892 takedown model with a 16" barrel in .357 magnum but that's all for firearms trades. If you have any questions about the pistol please ask as long as you have the exemption status.

categories:GunsSporting Goods

23555 impressions

2504 views

Selling as i have less time to shoot rifles and this one deserves to go to someone who will shoot it. I know there is varying reviews on these conversions. My understanding is most (possibly all) were done by century arms and some cycled and some did not. Do your own research please. This one has cycled 125rds of the lake city ammo for me and I don't recall any failures. Both mags did work. Can't guarantee any other ammo as I only tried the one. At the time I acquired this rifle the original scopes were either unavailable or very expensive. I found the vomz played the part. The front is attached with an original ring and a bushing. The back I had to make a scope ring to clamp the back in place. It's machined aluminum painted black. There is just enough room to slide the scope on and off its rail without having to remove the scope from the mount. Included Rifle Original sling and buttpad (cracked) Scope mount with rings Two magazines 4 stripper clips (for 7.5 French but functions well with 7.62x51) Above for $3500 Options Vomz modern PU scope +$400 Lake city 7.62x51 x275rds +$300 (local only) (not for sale separately) Shipping I believe is around $75 but that was a few years ago Located near Carstairs, AB

categories:GunsSporting Goods

5101 impressions

682 views