Brand new Non-restricted Caliber:  .44 Magnum Capacity: 8 Rounds Action: Lever Action Safety: Cross-Bolt Receiver Finish: Matte Black Barrel: 16.3" Threaded (Matte Black) Front Sight: HIVIZ® H3 Rear Sight: XS Sights (Ghost Ring) Scope ability: Drilled and Tapped Scope Mount Type: Picatinny Rail Stock Material: Black Synthetic Buttplate: Black Solid Rubber Recoil Pad Handguard: Aluminum (M-LOK) Length of Pull: 14" Rate of Twist: 1:16 Overall Length: 33.4" Weight: 6.5 lbs Part#14193 Made in USA

categories:GunsSporting Goods

2448 impressions

173 views

Brand new Non-restricted Lever Action Caliber: .30-30 WIN Capacity: 6+1 Barrel: 20″ 5/8-24 Threaded 410 Stainless Steel (Armornite finish) Sights: Gold bead front sight,XS Sights ghost ring rear sight Accepts mounts compatible with Marlin® 1894 hole patterns Walnut Stock with textured grip panels Walnut Forend with textured grip panels Large loop operating lever Forged 416 SS Receiver (Armornite finish) Safety: Cross-Bolt Full Length: 37.8" Made in USA

categories:GunsSporting Goods

5005 impressions

230 views

Smith & Wesson Model SD9VE semi-automatic pistol with factory box and additional factory 15-round magazine. 4" barrel chambered in 9mm Luger with factory sights. CONDITION: NRA Excellent with bright bore and crisp rifling.

categories:GunsSporting Goods

4838 impressions

819 views

Extremely rare Smith & Wesson No 3 chambered in 455 Eley with target sites and a 1-9/16 inch cylinder Was a special order. This revolver still retains about 75% of the original bluing it comes with a 7 1/2 inch barrel checkered walnut grips showing where but good condition no chips or cracks. The trigger set is amazing. This revolver is one of twelve ordered and shipped to Birmingham England in 1905, this revolver frame was produced prior to 1888 as documented and is considered an Antique status in Canada. Smith & Wesson factory letter included. PAL not required

categories:GunsSporting Goods

68403 impressions

4105 views

Please text anytime 6476871484. Fully functional antique revolver in mechanically perfect and ready to shoot condition ,very good action, no PAL needed. Reloadable ammo is available but sold separately Comes with FRT RCMP paperwork. Smith & Wesson 44 New Model No. 3 Top Break, .44 Special / Russian Revolver. This one is in very good condition with longer 1 9/16 cylinder and can shoot both .44 Special and 44 Russian ammo. The action is strong and accurate, and the cylinder indexes and locks properly. The bore of the 6.5-inch barrel is quite good, with strong rifling. The black hard rubber grips are good and undamaged. Mechanically in excellent condition with proper timing and lockup. The latch is also solid with zero play. Extractor works as it should. SN 10438, very good overall. History & Background Smith and Wesson's first double action design dates back to at least 1872 - years before Colt ever attempted a double action cartridge revolver. It was mentioned in a letter to the Russian envoy General Orlof, and although the sale to Russia never materialized, it served to pave the way for the very popular and successful line of double action top break revolvers. The .44 Russian model was actually the first to be produced as a prototype, and the last to be released for sale to the public. For this reason there exists a degree of confusion over the proper terminology: the first one to be manufactured for sale was the .38 caliber model, followed by the .32. The .44 caliber model was not released until 1881, and is variably known as the No. 3 Double Action, the Double Action "Navy" (a name Daniel Wesson wanted to keep alive to differentiate this model from the No. 3 single action, and still holding out hope to sell it to the Russian navy), and the First Model Double Action. Originally, the .44 Double Action was made with a 1 7/16 inch cylinder, however an optional .44-40 version was available as of 1886. This required a 1 9/16 inch cylinder, and a longer frame. The firm soon realized that it was too expensive and cumbersome to manufacture two different sizes of frames for what was essentially the same gun, and the shorter cylinder and frame were dropped in favour of the longer one in the early 1890's. The No. 3 frame .44 double action top breaks were dropped from the Smith and Wesson catalogue in 1913.

categories:GunsSporting Goods

854 impressions

416 views

Will sell or trade the following 180 grain 308 ammo round for round for 150 grain soft points in either Federal or Winchester 2 boxes of 24 Federal Classic Hi-Shok 180 Grain Soft Points (48 rounds) Sold 1 pack Smith and Wesson 180 grain soft points (10 rounds) Sold 1 box of Federal Hi-Power 180 grain soft points (20 rounds) 2 boxes of Federal Power-Shok 180 grain soft points (40 rounds) 2 boxes Winchester Super-X 180 grain Power Points (36 rounds) 1 box Winchester Super-X 180 grain Silvertip soft points (20 rounds) Total of 116 rounds remaining. Will sell them for $35.00 per 20 which is $1.75 per round or as a bundle for $175.00. Thanks, Phil

categories:GunsSporting Goods

7619 impressions

518 views

Black, steel. Complete with follower, spring, floor plate off of 30-06 1500

categories:GunsSporting Goods

1227 impressions

178 views

Smith & Wesson 1854 Lever Gun in .357 Low round count Original box F2F sale only - Whitby, Ontario area

categories:GunsSporting Goods

697 impressions

70 views

Howdy Townpost. This is a nice little and fair conditioned pocket tip-up revolver, in .30 Rimfire. In the 19th century, XXX was used denote very strong malt liquor. So I think marlin was trying to market in the name that this is a stout little gun. Similarly done by Hopkins & Allen with the naming of their "XL" series of pocket revolvers. These were made by Marlin from 1873-1887 with a total of roughly 26,000 being made. They are essentially copies of the Smith and Wesson Model 1 1/2's and 2's. The mechanical condition of this firearm is excellent. The hammer and cylinder function reliably and as intended. Timing and lock up are excellent. The barrel is tight on the frame. This revolver was tuned by my gunsmith too. The bore is worn but there's some life left in it. There's frosting at the front of the cylinder and the forcing cone. The nickel is mostly present on the frame and the beautiful original rosewood grips are in excellent shape. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

6808 impressions

270 views

Howdy Townpost. This is a nice little and good conditioned pocket tip-up revolver, in .32 RF long. These were made by Marlin from 1875-1887 with a total of 33,000 being made. They are essentially copies of the Smith and Wesson Model 1 1/2's and 2's. The mechanical condition of this firearm is excellent. The hammer and cylinder function reliably and as intended. Timing and lock up are excellent. This revolver was tuned by my gunsmith too. The bore is worn but there's some life left in it. There's some frosting at the front of the cylinder and the forcing cone. The nickel is mostly present on the frame and the hard rubber grips are in excellent shape. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

6025 impressions

211 views

Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.

categories:GunsSporting Goods

11653 impressions

520 views

Smith & Wesson new model double action no 3 .This revolver still retains about 75% of the original nickel finish comes with a very nice set of pearl grips showing a little bit of were but no chips or cracks. The action functions very well in single or double action with good timing and lock up  still  lots of strong visible rifle but minor typical black powder pitting, it has a 6 inch barrel chambered in 44 Russian caliber  as well as a long cylinder , 1-9/16” This is an  revolver and you do not require PAL to purchase it. RCMP, FRT documents included.

categories:GunsSporting Goods

1500 impressions

235 views

Extremely rare Smith & Wesson double action favourite model.  approximately 1000 of these produced this one was sent to Berlin in 1887. This revolver still retains over 90% of the original nickel finish comes with a very nice set of pearl grips, the action functions perfect both in single and double action with excellent lock up and timing. Don’t miss an opportunity to own this extremely rare Smith & Wesson Antique. It comes with the RCMP, FRT document and the Smith & Wesson history letter. 

categories:GunsSporting Goods

1255 impressions

210 views

Brand new Multi holster 2 in 1. IWB and OWB Smith & Wesson M&P Shield 9/40 w/LG489 G Style: Multi 2in1 OWB/IWB Pancake Color: Black CalcuttaMulti Right Hand with 1.75" Belt loop

categories:GunsSporting Goods

37185 impressions

1902 views

Please text anytime 6476871484. Fully functional antique revolver in ready to shoot condition ,very smooth action. No PAL needed. Can shoot 32rf long and short. Comes with FRT RCMP paperwork. Smith and Wesson No. 2 "Old Model Army", .32 RF Revolver This one is in very good condition. With original blue. The action is strong and accurate, and the cylinder indexes and locks properly without play. The bore of the 5-inch barrel is very good, with sharp rifling and mirror bright. The rosewood grips are very good and undamaged. They look like they may have been re-varnished once. SN 59474, very good overall. History & Background Horace Smith and Daniel Baird Wesson acquired Rollin White’s patent (1855) for the bored-through cylinder to manufacture what they originally called the No. 1 revolver in .22 rim fire. It proved to be a rather ineffective little pocket revolver but was nonetheless very popular with civilians as a personal protective weapon. In 1861, just as the civil war gained momentum, S&W decided that they needed a larger caliber revolver in order to be able to convince the buying public (many of them enlisted in the war) that their gun was a viable protective option and as a back-up gun in battle. The scaled-up design was duly named the No. 2 and was nicknamed the “Army”, as it was widely used by military personnel as a personal side arm. Smith & Wesson retained and defended the Rollin White patent aggressively throughout the civil war period, and until its expiry in 1870, and therefore the No. 2 “Army” would be the only American made cartridge revolver used during this conflict (although several “unlicensed” makers added their wares into the fray, such as Uhlinger, Pond and Moore). The model is called “Old Model” due to its frame shape – the square butt and octagonal barrel of the model 1 ½ First Issue, as compared to the bird’s head grip and round barrel of the Second Issue. There is no “New Model” Army. The "No. 2 Old Model" was a popular personal side arm of many officers in the Union forces during the American Civil War, and is also known as the "Army" model. It was first introduced in 1861, and made until about 1874. The "No. 2" refers to the frame size, "No. 1" having been the first, .22 caliber pocket revolver and the "No. 3"'s being the large-frame revolvers. The 1 1/2 was introduced after the number 2, and since it fits in between the no. 1 and no. 2, it was named the no. 1 1/2. The no. 2 was owned by such famous Americans as General George Armstrong Custer and "Wild Bill" Hickok, the marshal of Deadwood...

categories:GunsSporting Goods

8006 impressions

322 views

Please text anytime 6476871484. Fully functional antique revolver in mechanically perfect and ready to shoot condition ,very good action, no PAL needed. Reloadable ammo is available but sold separately Comes with FRT RCMP paperwork. Smith & Wesson 44New Model No. 3 Top Break, .44 Russian Revolver This one is in very good condition. The the serial numbers match . The action is strong and accurate, and the cylinder indexes and locks properly. The bore of the 6-inch barrel is quite good, with strong rifling. The black hard rubber grips are good and undamaged. Mechanically in excellent condition with proper timing and lockup. The latch is also solid with zero play. Extractor works as it should. SN 5819, very good overall. History & Background Smith and Wesson's first double action design dates back to at least 1872 - years before Colt ever attempted a double action cartridge revolver. It was mentioned in a letter to the Russian envoy General Orlof, and although the sale to Russia never materialized, it served to pave the way for the very popular and successful line of double action top break revolvers. The .44 Russian model was actually the first to be produced as a prototype, and the last to be released for sale to the public. For this reason there exists a degree of confusion over the proper terminology: the first one to be manufactured for sale was the .38 caliber model, followed by the .32. The .44 caliber model was not released until 1881, and is variably known as the No. 3 Double Action, the Double Action "Navy" (a name Daniel Wesson wanted to keep alive to differentiate this model from the No. 3 single action, and still holding out hope to sell it to the Russian navy), and the First Model Double Action. Originally, the .44 Double Action was made with a 1 7/16 inch cylinder, however an optional .44-40 version was available as of 1886. This required a 1 9/16 inch cylinder, and a longer frame. The firm soon realized that it was too expensive and cumbersome to manufacture two different sizes of frames for what was essentially the same gun, and the shorter cylinder and frame were dropped in favour of the longer one in the early 1890's. The No. 3 frame .44 double action top breaks were dropped from the Smith and Wesson catalogue in 1913.

categories:GunsSporting Goods

5476 impressions

239 views

Please text anytime 6476871484. Fully functional double action revolver in perfect condition. No PAL required. Comes with FRT paperwork. Reloadable ammo is available but sold separately. Colt M1889 "Navy", .41 Long Colt Revolver This one is in excellent condition. It bears about o 99% of its original nickel plating. The nitre blue on the trigger, hammer and screw heads is well visible. The action is smooth and accurate, and the cylinder indexes and locks properly. The bore of the 4.5 inch barrel is fine and bright, with sharp rifling. The markings are sharp and defined throughout. The assembly numbers match on the cylinder, crane, barrel and frame. The grips are excellent and undamaged, showing no wear.SN 20959, rated excellent overall.​​ History & Background This model is an important milestone in Colt handgun development, as it is the first American revolver with a swing-out cylinder mounted on a crane, a development which would become the standard for modern revolvers to this day. The 1889 cylinder mechanism was already "on the books" as early as 1880, based on designs of Colt engineers William Mason, C.J Ehbets and Horace Lord. It would take almost ten years for Colt executives to give the green light to manufacture this gun, and once it was available, the US government quickly took notice and ordered several thousand for the Navy. Colt adopted the name "New Navy" in honor of this order. The gun has an interesting counter-clockwise cylinder rotation and a locking mechanism which relies entirely on the two-pronged hand. This would prove to be a weakness in the design, and by 1892 locking lugs on the outside of the cylinder were introduced. The 1889 model would remain in production for 18 years, with significant improvements in 1892, 94, 95, 96, 1901 and 1903. When it was first introduced in 1889, it met with no competition from the other major makers - Smith & Wesson were still heavily engaged in manufacturing top-break revolvers, and Remington only had their solid frame revolvers with removable cylinders to offer. It would take S&W another ten years before they had a viable alternative to Colt's design.

categories:GunsSporting Goods

10586 impressions

570 views

Please text anytime 6476871484. Fully functional antique revolver in mechanically perfect and ready to shoot condition ,very smooth action no PAL needed. Reloadable ammo is available but sold separately' Comes with FRT RCMP paperwork. Smith & Wesson 44New Model No. 3 Top Break, .44 Russian Revolver This one is in very good condition. The the serial numbers match . The action is strong and accurate, and the cylinder indexes and locks properly. The bore of the 6-inch barrel is quite good, with strong rifling. The black hard rubber grips are good and undamaged. Mechanically in excellent condition with proper timing and lockup. The latch is also solid with zero play. Extractor works as it should. The .44 Russian round was known for its incredible accuracy and when combined with the fast reload time of the top break auto ejection system that Smith & Wesson designed it made their revolvers far superior to anything else on the market. SN 26203.​ ​​ History & Background Smith and Wesson's first double action design dates back to at least 1872 - years before Colt ever attempted a double action cartridge revolver. It was mentioned in a letter to the Russian envoy General Orlof, and although the sale to Russia never materialized, it served to pave the way for the very popular and successful line of double action top break revolvers. The .44 Russian model was actually the first to be produced as a prototype, and the last to be released for sale to the public. For this reason there exists a degree of confusion over the proper terminology: the first one to be manufactured for sale was the .38 caliber model, followed by the .32. The .44 caliber model was not released until 1881, and is variably known as the No. 3 Double Action, the Double Action "Navy" (a name Daniel Wesson wanted to keep alive to differentiate this model from the No. 3 single action, and still holding out hope to sell it to the Russian navy), and the First Model Double Action. Originally, the .44 Double Action was made with a 1 7/16 inch cylinder, however an optional .44-40 version was available as of 1886. This required a 1 9/16 inch cylinder, and a longer frame. The firm soon realized that it was too expensive and cumbersome to manufacture two different sizes of frames for what was essentially the same gun, and the shorter cylinder and frame were dropped in favour of the longer one in the early 1890's. The No. 3 frame .44 double action top breaks were dropped from the Smith and Wesson catalogue in 1913.

categories:GunsSporting Goods

21366 impressions

1228 views

Brand New Non Restricted Caliber: .30-30 WIN Capacity 5+1 Safety: Cross-Bolt Receiver Finish: Matte Black Barrel: 16.5" Threaded (Matte Black) Front Sight: HIVIZ® H3 Rear Sight: XS Sights (Ghost Ring) Scopeability: Drilled and Tapped Scope Mount Type: Picatinny Rail Stock Material: Black Synthetic Buttplate: Black Solid Rubber Recoil Pad Handguard: Aluminum (M-LOK) Length of Pull: 14" Rate of Twist: 1:10 Overall Length: 33.4" Weight: 6.5 lbs Part #: 14454 Made in USA

categories:GunsSporting Goods

2444 impressions

169 views

Brand New Non Restricted Caliber: .45-70 Govt Capacity 5+1 Barrel:16.5” barrel with 1:20” RH twist 8 groove. 11/16 x 24 threaded barrel with thread protector. Aluminum M-LOK® handguard w/15 M-LOK slots. Forged 416 stainless steel receiver with Armornite® finish. Flat trigger with crisp break. Large Lever loop. Black synthetic stock with textured grip panels. XS Sights® adjustable rear ghost ring sight. HIVIZ® H3 front sight. Part #: 14453 Made in USA

categories:GunsSporting Goods

2698 impressions

168 views

Brand New Non Restricted Caliber: .45-70 Govt. Capacity: 6 Rounds Action: Lever Action Safety: Cross-Bolt Receiver Finish: Stainless Steel Barrel: 20" Round Stainless Steel Front Sight: Gold Bead Rear Sight: XS Sights (Ghost Ring) Scope ability: Drilled and Tapped Scope Mount Type: Picatinny Rail Stock Material: Black Polymer Butt plate: Black Solid Rubber Recoil Pad Length of Pull: 14" Rate of Twist: 1:14 Overall Length: 37.8" Weight: 7.4 lbs Part#14204 Made in USA

categories:GunsSporting Goods

3959 impressions

311 views