10/22 Magazine Extension - "Standard" • Snaps and connects directly to your stock 10/22 rotary magazines, no mods needed! • Lengthens your magazine making it easier to handle, load and unload • Looks amazing when installed and gives your firearm a new modern look with a slightly curved magazine • Available in 3 sizes: Mini, Standard, and AR style Please message us directly to request a different color other than black. Available for purchase at canuckmagnorth.ca If you have any questions, requests, or inquires, contact anytime via email. Email canuckmagnorth@gmail.com

categories:Sporting GoodsGuns

15607 impressions

981 views

Standard 5/30-round Magazine for AR-15 Stainless Steel NEW The standard 5/30-round magazine. Magazines have locking tabs to help with alignment. Stainless steel magazines are great for reloaders as the wall thickness is minimal, allowing slightly increased cartridge lengths. 5-round capacity of 5.56 cartridges Among the most reliable magazines available Stainless steel  Black oxide finish  Removable floor plate Anti-tilt follower Chrome silicon spring for years of service Weight: 170g 30-round Magazine pinned to 5 rounds.

categories:Sporting GoodsGuns

7015 impressions

317 views

LEUPOLD Standard One-Piece Short Action Savage 10 Round Receiver Matte Black Base (55724) 30$

categories:Sporting GoodsGuns

7384 impressions

243 views

Selling- three bricks of higher end .22 long rifle ammunition. $125.00 per brick. No trades. E-transfer preferred. Ruag BBM, made in Germany. 40 grain round nose lead. High velocity. Two bricks remain. Lapua SK Standard Plus, made in Germany. 40 grain lead round nose. Standard velocity. One brick remains. - SOLD PENDING FUNDS -

categories:Sporting GoodsGuns

3835 impressions

130 views

Made in Finland M22000 Valmet Jyvaskyla Standard . 22LR Competition single shot bolt action. 27.5" heavy competition barrel. Adjustable butt plate and set trigger. Friction T channel sling slot. Profiled competition heavy stock for right handed use. Bushnell 3-9 x 20 scope with dovetail rails on receiver. Drilled and tapped for rear sight with front sight mount. VKT (Valmet), or the State Rifle Factory became operational September 9, 1928. Since 1930 Valmet's factory rifle club was active as well, having their hand in the design of the Finnish Lion, together with Aimo Lahti, the chief designer. 2. The Finnish Lion has the longest manufacturing time of all Finnish guns, from 1930 to 1979. Models are: M30 (prototype), M31 mod I, mod IIa, IIb, IVb, IVc, M35, M45, M52, M55, M59, M62, M65, M70, M200002 (Finnish Lion Standard) and wild boar version. Heavier models were the Finnish Lion Match and Champion. Two lighter version were also made, Junior and Pikku Leijona (Little Lion). 3. Serial numbers start from #1 (1932), and end into # 14,358 (1979). 4. The bolt and trigger are said to have been ahead of their time. The lock time is fast. Also the barrels were accurate. Champion models should have a set trigger, which makes lock time longer, but reduces pull weight. 5. Some of Vlamet's success in competition: WORLD RECORDS: -Lucerne 1939, 40 shots prone -400 points, Toivo Mänttäri -Buenos Aires 1949, 3x40 team contest 5770, finnish team, 40 shots standing, 380 points, Pauli Janhonen WORLD CHAMPINSHIPS -Buenos Aires 1949, 3x40 shots, 1165 points, P. Janhonen -Stockholm 1947, 40 shots standing, 377, H. Erben 6. The Helsinki Olympics in 1952 was the prime time of the Lion. A quarter of all shooters shot the Lion, prone gold was won by a Romanian - a Mr. Sirbu, score 400. CFP/RCMP courtesy of Bill C-71 require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Sections 99 & 101 of the Criminal code.

categories:Sporting GoodsGuns

41149 impressions

1532 views

Weatherby Mark V bolt standard magnum bolt face (300 wby mag etc) LEFT HAND complete

categories:Sporting GoodsGuns

20759 impressions

1023 views

I have several brand new in box Trijicon glock sight sets up for sale as follows: Trijicon standard frame glock DI night sights(multiple available): $120.00 plus shipping SKU: GL801-C-601102 Trijicon small frame glock fiber optic sights(multiple available): $75.00 plus shipping SKU: GL713-C-601029 Shipping is on the buyer Local meet up available central alberta EMT for payment or cash for face to face deal

categories:Sporting GoodsGuns

6097 impressions

549 views

Ad Title: Winchester, Model 12, Standard Trap, 12GA, Takedown Make : Winchester Model: 12, Standard Trap Serial Number: 696353 (Made in 1936) Type of action: Pump Action Barrel length: 30 inches Caliber: 12GA – Full choke Note: The Winchester Model 12 with the indication “STANDARD TRAP” is a very rare one. Just a few are known in North America. Condition: Very Good condition with the original blue at 85% to 90% all over the barrel and action. The stock and forend are also in great condition with a nice wood and nice looking checkering. The barrel inside is immaculate. Permit: PAL required Price: $1,950.00 Cdn (One similar shogun was sold in United States for $2,250.00us + buyer’s premium + applicable fee and taxes which represents over $3,000.00 Canadian) Ref: 02A415 Shipping: $60 in Canada Basic Insurance: $100 included with all purchases Full insurance: Add 2% of the value of your purchase to get full coverage Payment: By E Transfer

categories:Sporting GoodsGuns

29646 impressions

3017 views

Howdy Townpost. This is a nice little and fair conditioned pocket tip-up revolver, in .30 Rimfire. In the 19th century, XXX was used denote very strong malt liquor. So I think marlin was trying to market in the name that this is a stout little gun. Similarly done by Hopkins & Allen with the naming of their "XL" series of pocket revolvers. These were made by Marlin from 1873-1887 with a total of roughly 26,000 being made. They are essentially copies of the Smith and Wesson Model 1 1/2's and 2's. The mechanical condition of this firearm is excellent. The hammer and cylinder function reliably and as intended. Timing and lock up are excellent. The barrel is tight on the frame. This revolver was tuned by my gunsmith too. The bore is worn but there's some life left in it. There's frosting at the front of the cylinder and the forcing cone. The nickel is mostly present on the frame and the beautiful original rosewood grips are in excellent shape. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:Sporting GoodsGuns

23602 impressions

778 views

Highstandard supermatic Duck modle c1211. Made in hamen, conn. usa 12g 2 3/4" and 3" magnum only. 29 1/2" barrel, about 14 1/4" lop, left side bolt release wich is a nice feature. Overall very clean, very minor safe marks, blueing is 98%, jeweled bolt very nice shape and shoots well, very minor use, barrel looks shinney new. Will ship on buyers cost.

categories:Sporting GoodsGuns

7609 impressions

721 views

Brand new Non Restricted Caliber: 12 Gauge Overall Length: 29.5" Weight (unloaded): 9 pounds 12 ounces Barrels: 2 x 18 7/8”, chambered for 2 ¾” or 3" shells Chokes: Both barrels include spreader choke tubes with Tru-Choke thread pattern Capacity: 14 rounds in magazine tubes + 2 in chambers = 16 total  with indicator windows Action: pump action with two shots from single trigger, inline shell feeding Material: Patented polymer and aluminum frame Controls: Ambidextrous safety, ambidextrous pump slide release Grip: Co-Molded non-slip rubber pistol grip, composite front vertical grip Stock: Synthetic stock  Forend: Composite material with slots for MOE Rails Recoil Pad: Rubber with dual spring shock absorbing recoil mechanism Sling Points: Front sling attachment, sling swivel attachment on stock Part #: DP12GENIIBLK

categories:Sporting GoodsGuns

4625 impressions

201 views

I am selling my Spartan bipod, I am selling it because I decided to not buy into the spartan ecosystem and bought a different bipod. It was never used for hunting and was only used at the range. It goes from 7-9" and weighs 7.6 oz. I also have the Aspis pack that goes with the bipod. You can either mount it to a binocular harness with molle webbing or your belt. It comes with one adapter to mount to a rifle in place of a sling stud. If you're looking at purchasing this bipod I'd really recommend looking on the spartan website for more information. I'm selling the bipod and the holster together for $300.00. I will ship it if necessary.

categories:Sporting GoodsGuns

2918 impressions

391 views

Caliber: 30-06 Casing: Brass Rounds Per Box: 15 Made in Serbia Notice: This is Blank ammo

categories:Guns

5370 impressions

381 views

Brand new Match-grade precision drop-in barrel 1:10 Twist / 6 groove rifling CNC-machined from 416R stainless steel billet results in superior corrosion resistance and durability Low-temperature vacuum PVD coating creates a durable barrier against wear and tear even in the harshest environments BORSLICK™ Boron Nitride DCD (Dynamic Compound Deposition) inner bore treatment resists heat and carbon buildup Target crowned muzzle Individually hand inspected for accuracy No gunsmith required Limited lifetime warranty Made in USA Not interested in trade Thanks

categories:Sporting GoodsGuns

18175 impressions

1852 views

Brand new Match-grade precision drop-in barrel 1:10 Twist / 6 groove rifling CNC-machined from 416R stainless steel billet results in superior corrosion resistance and durability Low-temperature vacuum PVD coating creates a durable barrier against wear and tear even in the harshest environments BORSLICK™ Boron Nitride DCD (Dynamic Compound Deposition) inner bore treatment resists heat and carbon buildup Target crowned muzzle Individually hand inspected for accuracy No gunsmith required Limited lifetime warranty Made in USA Not interested in trade Thanks

categories:Sporting GoodsGuns

17802 impressions

1835 views

Blaser R8 Jaeger 300 WIN MAG Straight Pull hunting rifle.25.59" barrel with custom muzzle made by Italian Sporting Goods. Front sight removed. Standard 17mm Inlet. Black Bolt Knob (updated to metal engraved bolt knob). Stock Wood Grade 3.Trigger upgraded to Gold.Come with Spartan Javelin Lite Hunt Bipod. Very good condition. Local is preferred, but will ship at buyers expense. Further Lost insurance can be purchased by the buyer. Valid Pal a Must and will be verified for reference number. Please send message to: medal1958@gmail.com

categories:Sporting GoodsGuns

14370 impressions

825 views

Great little rifle made in Germany Diana R-22 22LR, Carbon fiber wrapped barrel, super accurate, less than 200 rounds shot, all the rounds were shot CCI mini mag 36gr. Diana R-22 features an ergonomic all-weather polymer stock in an attractive OD Green. The hammered precision carbon fiber wrapped barrel comes with a 1/2” UNF muzzle thread with countersunk muzzle. The dry-standing direct trigger offers an adjustable trigger weight of approx. 2-2.9 lb. Picatinny rails on receiver and forend allow for sturdy optics and bipod mounting. With a proven heritage of precision and accuracy the new Diana R-22 rimfire rifle sets the new standard in performance rimfire target shooting. Caliber: .22LR Capacity: 10 Rounds Action: Bolt Action Stock: Fixed, Polymer, OD Green Sights: Open Barrel: 18.5" Carbon Fiber Trigger Weight: 4 lbs. Overall Length: 37.5" Weight: 6.1 lbs. *** Notice, in order to purchase this rimfire rifle must comply with the law, I am required by law to see possession of legal firearm license and verify by RCMP website***

categories:Sporting GoodsGuns

25372 impressions

1026 views

10/22 Magazine Extension - "AR Style" • Snaps and connects directly to your stock 10/22 rotary magazines, no mods needed! • Lengthens your magazine making it easier to handle, load and unload • Looks amazing when installed and gives your firearm a new modern look with a slightly curved magazine • Available in 3 sizes: Mini, Standard, and AR style Please message us directly to request a different color other than black. Available for purchase at canuckmagnorth.ca If you have any questions, requests, or inquires, contact anytime via email. Email canuckmagnorth@gmail.com

categories:Sporting GoodsGuns

13956 impressions

830 views

CanuckMagNorth Glock Lower Parts Kit V1 V1 Specs. & Features • Compatible with G17 / G19 / G26 / G34 / G45 / G49 • O.E.M Glock dimensions & clearances • Available in Mirror Polished finish for smooth trigger pull • Available in factory standard finish Available for purchase at canuckmagnorth.ca If you have any questions, requests, or inquires, contact anytime via email. Email canuckmagnorth@gmail.com • • • Tags: Ruger pc9, Tnw aero jr, AR-9, Fx9, Spc9, Ghm9, Sub2k, Glocks, PSA Dagger, P80, G17, G19/19X, G26, G34, G45, G47, Glock Magazines, Glock Accessories, Firearm Magazines, Glock Firearms, Gun Enthusiast, Tactical Gear, Shooting Sports, Self Defense, Gun Culture, Pistol Magazines, Glock 19, Glock 17, Magazine Capacity, Range Day, Gun Safety, 2A Community, Firearm Training, Glock Life, Glock Family, Custom Magazines, Kriss Vector, Canik TP9, Palmetto State Armory Dagger, Glock Fanatics, Glock Tactics, Glock Mods, Glock Safety, Glock Nation, Glock Love, Glock Hobby, Glock Owners, Glock Customization, Glock Performance, Glock Addict, Glock Culture, Glock Fans, Glock Aficionado, Glock Shooter, Glock Pistol, Glock Magazine, Glock Sights, Glock Trigger, Glock Gear, Glock Competition, Glock Collectible, Glock Marketplace, Glock Range Day, Glock Features, Glock Reviews, Glock Tech

categories:Sporting GoodsGuns

31905 impressions

2222 views

10/22 Magazine Extension - "Mini" • Snaps and connects directly to your stock 10/22 rotary magazines, no mods needed! • Lengthens your magazine making it easier to handle, load and unload • Looks amazing when installed and gives your firearm a new modern look with a slightly curved magazine • Available in 3 sizes: Mini, Standard, and AR style Please message us directly to request a different color other than black. Available for purchase at canuckmagnorth.ca If you have any questions, requests, or inquires, contact anytime via email. Email canuckmagnorth@gmail.com

categories:Sporting GoodsGuns

14827 impressions

915 views

LAR Magazine extension - "Less than Half the Price compared to the competition!" • Connects directly to the bottom of your stock LAR magazine, lengthening it closer to a standard 30rd AR magazine • Makes it easier to handle, load, and unload your LAR magazine from your firearm, also looks great on your rifle and gets you some extra cool points at the range Please message us directly to request a different color other than black. Available for purchase at canuckmagnorth.ca If you have any questions, requests, or inquires, contact anytime via email. Email canuckmagnorth@gmail.com

categories:Sporting GoodsGuns

11354 impressions

693 views