Sporting Goods/Guns in Canada / War

FREE online Gun Classifieds for Canada. Easy to use buy and sell website for firearm owners to post used guns in Canada.

Popular search terms:

Photo of Lee Enfield No: 1 Mark III 1938 GR1 Singapore SMTLE
$1600
Lee Enfield No: 1 Mark III 1938 GR1 Singapore SMTLE
Lee Enfield No: 1 Mark III 1938 GR1 Singapore SMTLE . 303 BRITISH 10 round Mag, full wood, swivels, bayonet lug with pig sticker bayonet included, rear brass butt plate with tool kit compartment, 2000m rear adjustable iron sight. Frame and butt stock medallion match. Mag number unreadable. Length: SMLE No. 1 Mk III: 44.57 in (1,132 mm) Barrel length: SMLE No. 1 Mk III: 25.2 in (640 mm) In late 1915 the Mk III* was introduced incorporating several changes, the most prominent of which were the deletion of the magazine cut-off mechanism, which when engaged permits the feeding and extraction of single cartridges only while keeping the cartridges in the magazine in reserve, and the long-range volley sights. The windage adjustment of the rear sight was also dispensed with, and the cocking piece was changed from a round knob to a serrated slab. Rifles with some or all of these features present are found, as the changes were implemented at different times in different factories and as stocks of parts were depleted. The magazine cut-off was reinstated after the First World War ended, and not entirely dispensed with in manufacturing until 1933. The SMLE Mk III* (renamed Rifle No.1 Mk III* in 1926) saw extensive service throughout the Second World War, especially in the North African, Italian, Pacific and Burmese theatres in the hands of British and Commonwealth forces. Australia and India retained and manufactured the SMLE Mk III* as their standard rifle during the conflict, and the rifle remained in Australian military service through the Korean War, until it was replaced by the L1A1 SLR in the late 1950s.The Lithgow Small Arms Factory finally ceased production of the SMLE Mk III* in 1953.
categories:GunsSporting Goods
39447 impressions
1530 views
Saskatoon, SK1 day ago
Photo of BSA Model P17 30-06 23" barrel internal 4+1 Hinge Plate Mag
$450
BSA Model P17 30-06 23" barrel internal 4+1 Hinge Plate Mag
BSA Model P17 30-06 23" barrel internal 5+1 Hinge Plate Mag. Monte Carlo right handed stock, Adjustable rear sight with protected front hooded blade sight. Front and rear swivel mounts. Receiver is drilled and tapped for scope base mounts Made in England. Blueing is solid and the stock is in very good condition. Bore is shinny with good rifling. Canadian Non-restricted The M1917 Enfield, the "American Enfield", formally named "United States Rifle, cal .30, Model of 1917" is an American modification and production of the .303-inch (7.7 mm) Pattern 1914 Enfield (P14) rifle (listed in British Service as Rifle No. 3), which was developed and manufactured during the period 1917–1918. Numerically, it was the main rifle used by the American Expeditionary Forces in Europe during World War I.Thisbmodel was known as the P17 and chambered in 30-06 Springfield . The Danish Sirius Dog Sled Patrol in Greenland still use the M1917, which performs reliably in Arctic conditions, as their service weapon. CFP/RCMP courtesy of Bill C-71 require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Sections 99 & 101 of the Criminal code.
categories:GunsSporting Goods
42952 impressions
1985 views
Saskatoon, SK1 day ago
Photo of SWISS SCHMIDT RUBIN 1896/ K11 INFANTRY RIFLE 7.5mm X 55mm Manufactured: 1911-1920
$1160
SWISS SCHMIDT RUBIN 1896/ K11 INFANTRY RIFLE 7.5mm X 55mm Manufactured: 1911-1920
SWISS SCHMIDT RUBIN, MODEL: 1896/11 INFANTRY RIFLE, CALIBER: 7.5 X 55 Very good original condition 1911-1920 conversion date to M191 action.. SWISS SCHMIDT RUBIN, MODEL: 1896/11 INFANTRY RIFLE, CALIBER: 7.5 X 55, COMES WITH MUZZLE COVER, BORE IS VERY GOOD. VISIBLE NUMBERS MATCH. BARLEY CORN FRONT SIGHT WITH RAMP, ADJUSTABLE U NOTCHED REAR SIGHT, SILVER BOLT WITH RED POLYMER BOLT KNOBS. TWO PIECE FULL MILITARY WOOD STOCKS, FINGER GROOVED FOREND, MILITARY MODIFIED PISTOL GRIP, SMOOTH STEEL BUTT PLATE, SLING SWIVELS, STACKING HOOK, BAYONET LUG. METAL FINISH TURNING SILVER GREY WITH LIGHT PITTING, SCRATCHES, HANDLING MARKS AND WEAR. STOCKS SHOW DINGS, MARKS AND WEAR. ACTION: STRAIGHT PULL RIFLE, BARREL LENGTH: 30.75", CLASS: CANADIAN NON RESTRICTED. The Schmidt–Rubin rifles were a series of Swiss Army service rifles in use between 1889 and 1958. They are distinguished by the straight-pull bolt action invented by Rudolf Schmidt and use Eduard Rubin's GP90 7.5×53.5 and GP11 7.5×55 Schmidt–Rubin rifle cartridge. The Schmidt–Rubin 1896/11 rifle, or the Model 96/11, was a Swiss upgrade to the 89/96 rifles they had, to use the more powerful cartridge adopted as the GP11. The GP11 cartridge operated at a higher chamber pressure, which the 89/96 action could easily handle. The model 89/96 rifles were modernized by changing the three-groove rifled barrel to a new 4-groove type, adding a pistol grip to the stock, changing the magazine to the 6-round type used in the 1900 short rifle, and modernizing the sights. This also streamlined the appearance of the rifles. Because more rifles were needed than were available, the model 1911 rifle, with slight changes, was put into production. Almost all of the 127,000-plus model 89/96 rifles were converted to the 96/11 specifications. An improvement over the original 1889 version of the Schmidt–Rubin rifle, the Swiss M1911 placed the locking lugs in the middle of the bolt, rather than at the rear, strengthening the action and allowing a more powerful cartridge, the Gewehrpatrone 11 or GP 11 to be used. It is distinguished from the 96/11 rifle by a curved butt plate and by a stock with an integral semi-pistol grip. It uses a graduated tangent sight which begins at 300 meters. The 1911 and 96/11 rifles were made with excellent craftsmanship, and were exceptionally accurate. As Switzerland remained neutral through both world wars, remaining rifles are typically in far better condition than other European rifles of the time. CFP/RCMP courtesy of Bill C-71 require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Sections 99 & 101 of the Criminal code.
categories:GunsSporting Goods
30574 impressions
1320 views
Saskatoon, SK1 day ago
Photo of SWISS SCHMIDT RUBIN K11 M1911 CARBINE 7.5mm X 55mm  1931 Manufacture
$1400
SWISS SCHMIDT RUBIN K11 M1911 CARBINE 7.5mm X 55mm 1931 Manufacture
SWISS SCHMIDT RUBIN K11 MODEL: 1911 Action CARBINE CALIBER: 7.5 X 55, COMES WITH MAGAZINE, BORE IS VERY GOOD, SHINY. MADE IN 1931, VISIBLE NUMBERS MATCH. BLADE FRONT SIGHT WITH EARS, ADJUSTABLE U NOTCHED REAR SIGHT, BROWN POLYMER BOLT KNOBS, SILVER BOLT. TWO PIECE FULL MILITARY WOOD STOCKS, FINGER GROOVED FOREND, PISTOL GRIP, SMOOTH STEEL BUTT PLATE, SWIVELS WITH METAL HOOK FROM SLING ON ONE OF THEM, STACKING HOOK, BAYONET LUG. METAL FINISH SHOWS SOME NORMAL SCRATCHES, HANDLING MARKS AND WEAR. STOCKS SHOW SOME NORMAL SMALL MARKS, SCRATCHES AND WEAR. ACTION: STRAIGHT PULL RIFLE, BARREL LENGTH: 23.25" CLASS: CANADIAN NON RESTRICTED. Excellent Overall Condition An improvement over the original 1889 version of the Schmidt–Rubin rifle, the Swiss M1911 placed the locking lugs in the middle of the bolt, rather than at the rear, strengthening the action and allowing a more powerful cartridge, the Gewehrpatrone 11 or GP 11 to be used. It is distinguished from the 96/11 rifle by a curved butt plate and by a stock with an integral semi-pistol grip. It uses a graduated tangent sight which begins at 300 meters. The 1911 and 96/11 rifles were made with excellent craftsmanship, and were exceptionally accurate. As Switzerland remained neutral through both world wars, remaining rifles are typically in far better condition than other European rifles of the time. CFP/RCMP courtesy of Bill C-71 require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Sections 99 & 101 of the Criminal code.
categories:GunsSporting Goods
33088 impressions
1399 views
Saskatoon, SK1 day ago
Photo of British Pattern 1853 socket bayonet with leather scabbard
$125.00
British Pattern 1853 socket bayonet with leather scabbard
British Pattern 1853 socket bayonet with leather scabbard This is a British M1853 Socket Bayonet for use with the Enfield, Snider, Martini rifles. This 1853 pattern was the standard bayonet carried by nearly every British infantryman of the mid-19th century and widely used during the Crimean War, Indian Mutiny, and in numerous colonial campaigns. Production of the1853 pattern socket bayonet continued throughout the life of the Enfield Muzzleloader and the Snider rifle and was finally terminated in 1875. The blade has a slight downward curve to allow easier reloading while fixed to the muzzle-loading Enfield rifle. Measuring 44 cm (17 inches), it features a triangular cross-section with fullers on all three sides, tapering to a narrow, down-turned point. The blade is in good solid condition but is badly tarnished. The scabbard is in fair condition. The bottom brass below the frog hook is pulled free from the leather scabbard. The brass tip on the scabbard wiggles a bit but is still solidly attached. The stitching on the scabbard in the last 3 ½” above the end cap is partially missing but the scabbard is solid and not separating. The scabbard is stamped W.D. (War Department) below the frog stud with the Broad Arrow symbol above the initials. This stamping is difficult to see. The top of the blade at the base is stamped with an E over a crown over the number 25 Overall Length – with blade in scabbard - 21 3/8” Length of Bayonet – 20 3/4” Length of Grip including the Guard – 3 5/8” Blade Length – 17 1/8” $125.00 Thanks, Phil
categories:GunsSporting Goods
641 impressions
33 views
St. Albert, AB2 days ago
Photo of Smith and Wesson No. 2 "Old Model Army", Mid frame antique Revolver $2100
$2100
Smith and Wesson No. 2 "Old Model Army", Mid frame antique Revolver $2100
Please text anytime 6476871484. Fully functional antique revolver in ready to shoot condition ,very smooth action. No PAL needed. Can shoot 32rf long and short. Comes with FRT RCMP paperwork. Smith and Wesson No. 2 "Old Model Army", .32 RF Revolver This one is in very good condition. With original blue. The action is strong and accurate, and the cylinder indexes and locks properly without play. The bore of the 5-inch barrel is very good, with sharp rifling and mirror bright. The rosewood grips are very good and undamaged. They look like they may have been re-varnished once. SN 59474, very good overall. History & Background Horace Smith and Daniel Baird Wesson acquired Rollin White’s patent (1855) for the bored-through cylinder to manufacture what they originally called the No. 1 revolver in .22 rim fire. It proved to be a rather ineffective little pocket revolver but was nonetheless very popular with civilians as a personal protective weapon. In 1861, just as the civil war gained momentum, S&W decided that they needed a larger caliber revolver in order to be able to convince the buying public (many of them enlisted in the war) that their gun was a viable protective option and as a back-up gun in battle. The scaled-up design was duly named the No. 2 and was nicknamed the “Army”, as it was widely used by military personnel as a personal side arm. Smith & Wesson retained and defended the Rollin White patent aggressively throughout the civil war period, and until its expiry in 1870, and therefore the No. 2 “Army” would be the only American made cartridge revolver used during this conflict (although several “unlicensed” makers added their wares into the fray, such as Uhlinger, Pond and Moore). The model is called “Old Model” due to its frame shape – the square butt and octagonal barrel of the model 1 ½ First Issue, as compared to the bird’s head grip and round barrel of the Second Issue. There is no “New Model” Army. The "No. 2 Old Model" was a popular personal side arm of many officers in the Union forces during the American Civil War, and is also known as the "Army" model. It was first introduced in 1861, and made until about 1874. The "No. 2" refers to the frame size, "No. 1" having been the first, .22 caliber pocket revolver and the "No. 3"'s being the large-frame revolvers. The 1 1/2 was introduced after the number 2, and since it fits in between the no. 1 and no. 2, it was named the no. 1 1/2. The no. 2 was owned by such famous Americans as General George Armstrong Custer and "Wild Bill" Hickok, the marshal of Deadwood...
categories:GunsSporting Goods
17013 impressions
534 views
Mississauga, ON3 days ago
Photo of Remington New Model Police Model 1865 38 Rimfire Conversion Antique Revolver
$2250
Remington New Model Police Model 1865 38 Rimfire Conversion Antique Revolver
Howdy Townpost! I've got a nice little uncommon and good condition subcompact Remington for sale now! This started its life as a Remington Model 1865 New Model Police as a cap and ball percussion revolver in .36 caliber. Many of these were never percussion guns as they existed in a weird transition period. And Remington made some of them from the ground up as cartridge guns. This one most likely was in inventory as a percussion revolver and was turned into a .38 rimfire cartridge revolver based on the serial number, in my opinion. These are one of the more rare and lesser known Remington cap and ball guns that were made. Remington only made 18,000 between 1865 and 1873. So they are relatively uncommon and scarce gun today. This is actually my personal favorite model of Remington percussion revolver they're a very handy subcompact-sized gun by today's standards they're bigger and much more comfortable in the hand in the grip than the pocket models but nice and light unlike the full size military .44s and they point very naturally. This particular example is in very good condition the nickel is a very high percentage of coverage some of the original silver plate is still visible on the trigger guard and some of the low areas. The color case hardening is still very colorful and defined on the hammer (pictured). The grips have been refinished but they are the originals. The wood grain is very interesting and beautiful in my opinion. The bore is in excellent condition especially for a Civil War era black powder firearm. This was likely carried in a police officer's holster and not fired much. It was well taken care of and the clean and good condition bore and chambres are reflection of that. The the mechanical function of this firearm is excellent as well. When I got the firearm it was actually in amazing condition to begin with and the mechanical function was perfect. It locks up and times perfectly. The hammer and the trigger pull are very crisp, light and smooth. And didn't require any adjustment, Remington did the job and they did it right the first time. The entire revolver has been taken apart and given a gunsmith's cleaning and was reassembled and lightly oiled. I came across a nice little Hunter leather holster at a gun show and found that it fit this gun very well so it's included as a freebie with the gun (pictured). The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.
categories:GunsSporting Goods
15483 impressions
867 views
Calgary, AB4 days ago
Photo of WW2 1940 Original Canadian WWII P37 canvas holster
$80.00
WW2 1940 Original Canadian WWII P37 canvas holster
Here is a Canadian/British origin and the C broad arrow marking), and cross-referencing the images (including the faint stamping that reads “Z.L.&T. LTD 1940” along with the C broad arrow symbol), this is an original Canadian WWII Pattern 1937 (P37) web pistol holster. Features •  Khaki/tan heavy cotton canvas construction, typical of British/Commonwealth web gear from the era to save on leather due to wartime shortages. •  Flap closure with brass snap (often called a “lift-the-dot” fastener in some variants). •  Brass or metal belt hanger and loops on the back for attachment to P37 web belts or pistol belts. •  Angled design for right-side hip carry, with a reinforced muzzle end. •  Markings: “Z.L.&T. LTD 1940” refers to the manufacturer Zephyr Looms & Textiles Ltd. (Toronto, Canada), a known WWII contractor for Canadian military gear. The “C broad arrow” (often stylized as C↑ or C with an arrow inside) is the Canadian government property/acceptance mark, indicating it was issued for Canadian forces (part of the British Commonwealth system, where the broad arrow denotes ordnance property, and the “C” specifies Canada). This holster was designed primarily for revolvers like the Webley Mk IV .455 or Enfield No. 2 .38, which were standard for Canadian troops early in WWII. However, similar P37 holsters were also used or adapted for the Canadian-made Inglis Browning Hi-Power 9mm pistol (produced from 1944 onward). Original Canadian WWII P37 canvas holsters in good used condition (like this one, with intact hardware and no major tears) typically sell for $150–$350 on sites like eBay, GunsInternational, or militaria forums/auctions. Factors influencing price include: Rarity of the early 1940 date (pre-U.S. entry into the war, during the British Commonwealth’s initial buildup). Clear markings (the C broad arrow and manufacturer stamp add provenance). Condition: This appears solid but field-used, so more toward the $200–$300 range. Recent comparable sales include similar Z.L.&T. Ltd.-made holsters from 1943–1945 fetching $200–$300. Can ship anywhere in Canada Please see my other ads for collectable military accessories.
categories:GunsSporting Goods
9194 impressions
165 views
Chestermere, AB4 days ago
Showing 21 of 63 records
Location
Search within
of
auction, garage sale, or moving sale

Having a garage, estate, or yard sale?

Create an ad event to promote an auction, garage sale, or moving sale.

Item Type
Firearms54Parts4Ammunition4
Gun Type
Rifle17Handgun13Muzzleloader7Shotgun3Replica-or-Deactivated1Other1
Action
Bolt25Single-shot13Revolver7Semi-automatic6Pump2Double-barreled1Triple-barreled1
Caliber