2 bricks of Federal Large Rifle 215 Magnum Primers in Box 160.00 4 bricks CCI #250 Large Rifle Magnum Primers. 140.00 NO SHIPPING , Local,P/U in Camrose . $140.00- 160.00 Brick TEXT is best method to contact , thanks

categories:GunsSporting Goods

985 impressions

95 views

I got a unfired brand new savage 110 classic in 300 winmag with a threaded barrel. I had impulse purchased the rifle just before Christmas. It went from the box into my gun safe and has never been fired. It comes with a vortex viper 6.5-20x44 scope. Also a box of Barnes TTSX 165 grain bullets. Id be interested in a 243, 6.5 creedmoor, 25-06, or other larger coyote guns. Looking for around 1500 value (paid $1350 for rifle and 500 for the scope)

categories:GunsSporting Goods

868 impressions

66 views

1) Remington 700 - 742 Rear Sight w/screws $125.00 2) Remington 700 Front Sight Ramp, Sight Insert, Hood & Screws $135.00 3) Remington 700 742 760 Early Front Sight Ramp, Sight Insert, Screws (no Hood Slot) $120.00 4) Remington 700 742 760 Early Rear Sight $125.00 5) Remington 701 Rear Sight $75.00 6) Remington 721 Rear Sight - $110.00 9) Remington Dovetailed Front Sights $75 - $85 12) Leopold Stainless Base and Rings - Remington 700 SA $95.00 14) 6-48 Filler Screws (4) - Blue - $20.00 15) 6-48 Pan Head Filler Screws (4) - Blue - $20.00 16) 6-48 Filler Screws (4) - Stainless - $20.00 17) 8-40 Pan Head Filler Screws (2) - $20.00 18) 3/8" DT Filler - Curved Top - $45.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

99286 impressions

5289 views

Lee Enfield No: 1 Mark III 1938 GR1 Singapore SMTLE . 303 BRITISH 10 round Mag, full wood, swivels, bayonet lug with pig sticker bayonet included, rear brass butt plate with tool kit compartment, 2000m rear adjustable iron sight. Frame and butt stock medallion match. Mag number unreadable. Length: SMLE No. 1 Mk III: 44.57 in (1,132 mm) Barrel length: SMLE No. 1 Mk III: 25.2 in (640 mm) In late 1915 the Mk III* was introduced incorporating several changes, the most prominent of which were the deletion of the magazine cut-off mechanism, which when engaged permits the feeding and extraction of single cartridges only while keeping the cartridges in the magazine in reserve, and the long-range volley sights. The windage adjustment of the rear sight was also dispensed with, and the cocking piece was changed from a round knob to a serrated slab. Rifles with some or all of these features present are found, as the changes were implemented at different times in different factories and as stocks of parts were depleted. The magazine cut-off was reinstated after the First World War ended, and not entirely dispensed with in manufacturing until 1933. The SMLE Mk III* (renamed Rifle No.1 Mk III* in 1926) saw extensive service throughout the Second World War, especially in the North African, Italian, Pacific and Burmese theatres in the hands of British and Commonwealth forces. Australia and India retained and manufactured the SMLE Mk III* as their standard rifle during the conflict, and the rifle remained in Australian military service through the Korean War, until it was replaced by the L1A1 SLR in the late 1950s.The Lithgow Small Arms Factory finally ceased production of the SMLE Mk III* in 1953.

categories:GunsSporting Goods

39428 impressions

1530 views

Howa 1500 .223 Rem Heavy Barrel Blackhawk Talon stock Internal 5*1 with adjustable grip inserts. manual, picatinny rail. Very low round count. Excellent condition. Howa 1500 barreled action Tool-less Firing Pin Removal Machined Receiver and Forged Bolt Large Internal Bolt handle and pressure vent holes One of the safest actions on the market Reliable M-16 Style Extractor/Ejector Stringent and Exacting Headspace specs Bolt Faces are True and Square to Chamber Two Stage Match Trigger 3 Position Safety SUB MOA – 3 Shot Group @ 100 yds with premium factory ammo The Synthetic BlackHawk Talon Rifle Stock comes with a durable, rubber recoil pad and sling swivel studs already mounted. The Talon Thumbhole Stock is the engineered fusion of the patented Knoxx recoil-reducing technology, ergonomic control of a pistol grip and time-tested elements of a traditional thumbhole stock. Reliable and built to last, this stock will help improve accuracy, target re-acquisition times and firearm control. Strategically placed texture and grooves on the pistol type grip and for-end ensures a positive grip when handling your rifle. The stock has aluminium pillars for increased stability when tightening down your actions screws giving you a solid point and preventing compression of the fiberglass reinforced polymer skeleton. The BlackHawk Talon stock has a dual recoil-compensation system to reduce the harsh recoil of bigger calibers. The stock is also completely ambidextrous benefiting both right and left handed shooters. Guaranteed to look great, feel great, and shoot straight! The tactical looking yet attractive durable finish on the stock together with the rubber recoil pad make for a comfortable shooting experience. The Howa Blackhawk Talon rifle stock represents excellent value and combines Howa’s famous prowess in manufacturing with a sleek high quality finish to compliment any rifle that will outlast the adventures that lie ahead. CFP/RCMP courtesy of Bill C-71 require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Sections 99 & 101 of the Criminal code

categories:GunsSporting Goods

50375 impressions

1744 views

Thompson Center Arms .50 caliber Thunder Hawk In-line rifle has a tapered round 1" to 7/8" x 21" stainless steel barrel with light handling marks to the finish. The bore is shiny and the rifling overall is good and sharp. It has a 1:38 twist and a mounted weaver rail. Bullet loads up to 150grn There are factory mount holes to install a ring-type set up. The Rynite stock has a checkered wrist and forend. The stock has a rubber recoil reducing pad and sling swivel studs. The firing mechanism is set up for the #11 percussion cap or 209 primer and has an outside manual bolt position safety. Length of pull is 14", the overall length is 39", weight is 5.4 lbs. CFP/RCMP courtesy of Bill C-71 and JT will require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Private sales do not require any information about the firearm. Private sales do not require any information about the firearm. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Sections 99 & 101 of the Criminal code. Valid PAL required. Will ship on your dime. ANY ATTEMPT TO INQUIRE IF A PURCHASE CAN BE MADE WITHOUT A VALID AND CONFIRMED PAL WILL RESULT IN AN AUTOMATIC POLICE AND CFP CENTER REPORT. DON'T WASTE MY TIME WHICH MAY GET YOU TIME!

categories:GunsSporting Goods

106646 impressions

9083 views

$150 Often Specter Arms gets asked for a good scope for a light rifle; a 22 or a 223. With the budget friendly X4 scope, people now have a inexpensive low power variable optic packed with a variety of useful features. Its compact size and weight don't add much in terms of bulk keeping your favorite plinker light and easy to carry. In fact the X4 measures only 9.1" long. Its 1-4 magnification is plenty to shoot out comfortably to 200 meters placing this optic as a viable contender as an entry level 3 gun scope. It uses 1" rings which makes its compatible with a lot of older rifles designed with only 1" rings in mind. Picatinny rings are included. Finally, an illuminated reticle gives a nice contrast when shooting at dark backgrounds or in low light. Caliber Max: 762x39, 223 Appropriate For: Wk180C, WS-MCR, Wk181, Ar-15, Su-16, tm-22, Crypto, Raven, Henry Homesteader, Ruger 10/22 _____________ Specter Arms is a dealer for Victoptics is the sub-brand of Vector Optics. SA has more in stock then just S6s and X4s; red dots, scopes and micro reflex sights are all available on the website. Send a text to 7809079585 for more info. If Canada post is not on strike, shipping is available at actual cost or pick up in SE Edmonton. Please click on my user name for other ads and shipping policies. WARNING: messages sent through townpost are not getting through. Please email me directly or text me directly.

categories:GunsSporting Goods

80649 impressions

2745 views

For sale — complete rifle package (or available separately): Ruger American “Go Wild” — chambered in 7mm-08 installed in an MDT LSS-XL Gen2 chassis with a full set of upgrades. Excellent condition — <100 rounds through the barrel. Price includes shipping (domestic). Package price: $4,284 + tax (itemized below) Willing to sell rifle and scope separately: Rifle (complete) — $2,400; Scope — $1,250. Included / Itemized components & prices Ruger American 7mm-08 “Go Wild” (Bronze Cerakote) — $1,000 Bushnell Yardage Pro 4–12×42 with integrated rangefinder — $1,450 MDT LSS-XL Gen2 chassis — $620 MDT NV bridge — $150 MDT Pistol Grip Elite — $35 MDT 12-rd .308/7mm-08 magazines ×3 — $285 MDT +2 magazine baseplates ×3 — $54 MDT Carbine-to-Fixed-Stock Adapter — $60 MDT Oversized Bolt Knob — $35 Magpul PRS-Lite stock — $175 Magpul aluminum M-LOK Picatinny rail section — $30 Picatinny → Arca-Swiss adapter with integrated QD stud — $70 Vortex 20 MOA top rail — $170 3-chamber muzzle brake — ~$150 Upgraded trigger spring — ~2.0–2.5 lb pull (installed) Notes Rifle has been professionally maintained and is in excellent mechanical condition. Less than 100 rounds fired through the barrel. Photos and serial-number verification available on request for serious buyers. Shipping cost is included Open to reasonable trades with a F-class set up (prefer similar value) or offers of partial trade + cash (300wm, 308, 65cm, 65prc). 

categories:GunsSporting Goods

28901 impressions

1413 views

Brand new Non-restricted  Caliber: 223 REM Capacity: 5+1 Action: Bolt Action Barrel Length: 24"  Stock: Synthetic Weight: 3 kg M15x1 threaded muzzle Semi-heavy cold hammer forged barrel Adjustable Single-stage trigger Full Length: 1096 mm L.O.P. : 355 mm Twist Rate/Grooves: 1:7 / 6 Made in CZ

categories:GunsSporting Goods

4268 impressions

309 views

Steel gas block, non-adjustable, .750" gas journal $20 * Luth Steel ar15 adjustable gas block .750" gas journal $50 Mid length gas tube $20 Rifle length gas tube $5 (silver) Rifle length gas tube $8 (melonite/black) Anderson Charging Handle $20 H carbine weight buffer $30 H2 carbine weight buffer $40 H3 carbine weight buffer $50 LBE 223/556 Bolt, firing pin, cam pin kit $125 Hammer/trigger pins $5 (for a set of 2) Magazine catch and spring $5 Bolt catch (includes spring, roll pin and detent) $5 Buffer detent $1 (no I do not have detent springs) Takdown/pivot pin spring $2 Trigger guard $2 Faxon 18.6" barrel w/ adj gas block and gas tube (installed but not used) $300 Crush washer for 1/2" diameter threaded muzzle devices $2 1/4x28 3/4" length bolt $2 Anti-walk pin kit $20 15" mlock handguard $120 Vism mid length triangular aluminum handguard $40 _____________________________ With the exception of the barrel, all parts will be shipped in a canada post pre paid box for $19. Unless noted, all parts are new. Pick up available in SE Edmonton; minimum value for pick up order is $20 *can be installed sideways to block the gas port for renegade builds

categories:GunsSporting Goods

9823 impressions

374 views

1) Cooey Front Sight - $60.00 2) Cooey Rear Sight (99%) - $60.00 . 3) Cooey Early Rear Sight (99%) - $60.00 4) Cooey Swivels - $30.00 5) Cooey Elevator - $15.00 each 7) 6-48 Filler Screws (4) - Blue $20.00 8) 6-48 Pan Head Filler Screws (4) - Blue $20.00 9) 6-48 Filler Screws (4) - Stainless $20.00 10) 8-40 Pan Head Filler Screws (2) $30.00 11) 3/8" DT Filler - Curved Top - $45.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

101368 impressions

6576 views

WW1 French M1886 bayonet for the Lebel rifle. This is the war time simplified version without the quillion (hook) and with the brass handle. This version with the brass handle is of a type produced during the First World War, from the 25th of October 1914 until July of 1917.   The left side of the blade has the initials SG stamped just in front of the guard to identify the Maker.  The "S.G." mark on a French bayonet from the World War I era stands for Sutterlin Lippmann & Cie., a manufacturer located in Saint Étienne. The base of the guard has a stylized letter P with the number 45979 stamped into it. The scabbard has this matching serial number. The base of the grip has the number 11 stamped into it. The release button works as designed.   Overall Length – with blade in scabbard  - 25 3/4” Length of Bayonet – 25 1/8” Length of Grip including the Guard – 4 5/8” Blade Length – 20 1/4”   $250.00   Thanks, Phil

categories:GunsSporting Goods

2456 impressions

79 views

1) Browning Belgium BAR - BLR Folding Rear Sight (3/8" DT) - $195.00 2) Browning Belgium HP Rear Sight - 285.00 3) Browning Belgium Safari Folding Rear Sight with Base (2 screws - 7/8" C-C) - $285.00 4) Browning BLR Rear Sight - 2 screw - 9/16" C-C - $275.00 6) Browning - Sako Front Sight Base w/ Screws (0.75" C-C) - $75.00 7) 8) 6-48 Filler Screws (4) - Blue $20.00 9) 3/8" DT Filler - Curved Top - $45.00 10) Pachmayr 1" QD (Push & Turn - T Shaped) Swivels (2) - $150.00 per Set --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

97684 impressions

3660 views

Same action as Howa 1500. Excellent condition Excellent bore Comes with Weaver bases Push feed action with 2 position safety Hinged floorplate magazine Open sights Sling swivels The rifle weighs 7.6 pounds PAL will be verified Scope and rings not included No trades $600 + shipping

categories:GunsSporting Goods

1833 impressions

121 views

Beautiful smith and Wesson bolt action rifle in 30 06. Hard to find quality built rifle. Therse a rare. 4x12 hawke optics endurance scope mounted on. Beautiful optic. Ask for more details excellent condition, no marks on wood or metals. Immaculate. Can ship after pal clearance on your dime

categories:GunsSporting Goods

211 impressions

26 views

*Please leave your phone number or email me directly, not through Townpost. There's an issue with Townpost relaying my reply emails. Can hold for a non-refundable deposit. Can also do a payment plan. This is the very hard to get, Gen 4 (latest generation) Ruger Precision Rifle in 338 Lapua Mag. Brand new in box, unfired. Comes with everything it does from factory. Will ship at buyer's expense but priority will be given to local sale in Calgary. Stock: Folding, Adjustable Finish: Smoked Bronze Cerakote Grip: Magpul MOE-K2-XL Trigger: Ruger Marksman Adjustable (2.25-5 lbs) Capacity: 5 Barrel Length: 26" Weight: 15lbs Overall Length: 49.25" Length of Pull: 12"-15.50" Folded Length: 37.60"

categories:GunsSporting Goods

15556 impressions

652 views

2) Browning Safari Folding Rear Sight & Base, 2 Screws (7/8" C-C) - $275.00 3) Browning Belgium HP Rear Sight - $275.00 4) Browning BLR Rear Sight - 2 screw - 9/16" C-C -  $195.00 5) Browning BLR Rear Sight -  1 Screw - $160.00 7) Browning (Pachmayr) QD 1" Swivels - (BBR - 1885 - High Grade Rifles)  -  $150.00 8) Browning Front Sight Base w/ Screws (0.75" C-C)  -  $95.00 9) Gold Bead Front Sight   -  $85.00 11) 6-48 Filler Screws (4) - Blue   $20.00 12) 3/8" DT Filler - Curved Top - $45.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

70996 impressions

2539 views

Savage Model 110 LH 6.5 CM with stainless barrel and adjustable stock Vortex Razor LHT 3-15x42 scope Vortex precision bases Rifle has at most 200 rounds through it. Complete kit new is $3800 Looking to sell for $3300

categories:GunsSporting Goods

934 impressions

74 views

Winchester Model 06 caliber 22short, 22 long, 22 Long rifle, Pump, Barrel 20inch, Take-Down, Nice rifle, Collector Item, Barrel 98% blue, nice wood a bit some small dig, This model B, is semi-nickle, Only the barrel is blue,all other metal parts are nickle, In this model there are 3 options, Standard = all metal blue, second (B) semi-nickle only barrel blue and 3e All nickle, $1595.00 + shipping

categories:GunsSporting Goods

17472 impressions

866 views

2) Ithaca High Standard Elevator - .850" W x 1.00" L - $30 3) Elevator X - .104" W x 0.89" L - OAL = 1.65" - $35 4) Cooey Elevator - .075" x 1.21" - $15 5) Husqvarna Elevator - $45 6) Marble Double Step - Rifle Elevator - $35 7) Marble Double Step - Carbine Elevator - $35 8) Marlin Elevator M1 - Marlin S-25 Sight - .046" W x 1.60" L - $35 9) Marlin Elevator M2 - Marlin S-25 Sight - .055" W x 1.60" L - $35 10) Marlin Elevator (336 - 1894 - 1895) - .115"W x 1.43"L - SOLD 11) Marlin Early Fishhook Elevator- .075" W x 1.22" L - $35 12) Marlin Elevator - Marlin S-27 Sight - .095" W x 1.15" L - SOLD 14) Remington 98 1/2 Sight - 105 Elevator - Round Barrel Model 12 Rifles - $45 15) Remington "R" Elevator (701 1/2) - .057" W x 1.11" L - SOLD 16) Savage Folding Sight Elevator - .061" W x 1.13" L - $40 17) Savage Fishhook Elevator - $40 18) Savage 1899 Elevator - .095" W x 1.05" L - OAL = 1.27" - SOLD 19) Savage 99 Elevator - .095" W x 1.15" Lo - $40 21) Savage 24 Elevator (Replacement Style) - $25 22) Win Early Elevator - $40 23) Winchester 1A Elevator - dated (.207") - $60 24) Winchester 1B Elevator - dated (.162") - $60 25) Winchester 1C Elevator - no date (.175") - $60 28) Win 2C Elevator - .60"W x 1.625"L - $35 29) Winchester 3C - 6S Elevator - $50 - 31) 6-48 Filler Screws (4) - Blue $20.00 32) 6-48 Pan Head Filler Screws (4) - Blue $20.00 33) 6-48 Filler Screws (4) - Stainless $20.00 34) 8-40 Pan Head Filler Screws (2) $20.00 35) DT-1 - 3/8" DT Filler - Blue - Curved Top - $45.00 36) DT-2 - 3/8" DT Filler - Stainless - Curved Top - $50.00 - 40) Husqvarna Front Sight Hood - $85 41) Marlin pre 72 Round Front Sight Hood - $45 42) Marlin post 72 Front Sight Hood - $60 43) Sako - Finnwolf Hood - $85 44) Browning (Japan) BLR - BAR Front Sight Hood - SOLD 45) Parker Hale Front Sight Hood - $85 46) Browning (Belgium) Safari Front Sight Hood - $85 47) Winchester Model 9422 Front Sight Hood - $40 48) Winchester post 64 Model 94 Front Sight Hood - $40 49) Winchester pre 64 Model 94 Front Sight Hood - $40 50) Winchester Model 70-88-100-64-65 Front Sight Hood - $40 51) Winchester post 64 Model 70 Front Sight Hood - $75 52) Winchester post 64 Model 70 Front Sight Hood (Long) - $85 53) Winchester (97 Sight - Model 69) Front Sight Hood - $75 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

207372 impressions

2865 views

Brand new Non-restricted Caliber:  .30-30 Win. Capacity: 5 Rounds Action: Lever Action Safety: Transfer Bar Receiver Finish: Blued Steel Barrel: 20" Round Blued Steel Front Sight: Brass Bead Rear Sight: Fully Adj. Semi-Buckhorn w/ Diamond Insert Scopeability: Drilled and Tapped Scope Mount Type: Weaver 63B Stock Material: American Walnut Buttplate: Black Solid Rubber Recoil Pad Length of Pull: 14" Rate of Twist: 1:12 Overall Length: 39" Weight: 7.00 lbs. Made in USA

categories:GunsSporting Goods

10449 impressions

573 views