*Please leave your phone number or email me directly, not through Townpost. There's an issue with Townpost relaying my reply emails. Can hold for a non-refundable deposit. Can also do a payment plan. This is the very hard to get, Gen 4 (latest generation) Ruger Precision Rifle in 338 Lapua Mag. Brand new in box, unfired. Comes with everything it does from factory. Will ship at buyer's expense but priority will be given to local sale in Calgary. Stock: Folding, Adjustable Finish: Smoked Bronze Cerakote Grip: Magpul MOE-K2-XL Trigger: Ruger Marksman Adjustable (2.25-5 lbs) Capacity: 5 Barrel Length: 26" Weight: 15lbs Overall Length: 49.25" Length of Pull: 12"-15.50" Folded Length: 37.60"

categories:GunsSporting Goods

14485 impressions

615 views

*Please leave your phone number or email me directly, not through Townpost. There's an issue with Townpost relaying my reply emails. Only 1 remaining. Can hold for a non-refundable deposit. Can also do a payment plan. Popular and hard to find Marlin Dark Series. Brand new in box. I only took it out of the box to inspect. It has only been function fired by Marlin before leaving the factory as with all Marlin rifles. Comes with everything it does from factory. I also have a new in box Marlin Dark in 30-30 ($3250) and 44 Mag ($3500 - extremely hard to find). - 16” threaded barrel + thread protector - Durable graphite black cerakote - Radial muzzle brake - MLOK butt stock with cheek riser and flush cups - Hammer spur - MLOK & QD handguard - Extended length pic rail - Fiberoptic sights - Cable lock - Mid-sized finger lever for added comfort Will ship at buyer's expense but priority will be given to local sale in Calgary. No trades. If you contacted me via email, check your junk/spam folder for my reply email. Some people have notified me that it was going to that folder.

categories:GunsSporting Goods

97054 impressions

2642 views

*Please leave your phone number or email me directly, not through Townpost. There's an issue with Townpost relaying my reply emails. Can hold for a non-refundable deposit. Can also do a payment plan.  Popular and hard to find Marlin 1895 SBL (45-70) 1 also have 336 SBL (30-30) available. Fit and finish is excellent on these Ruger mades. Don'1 settle for a Remlin. Tariffs and poor exchange rate have increased the cost significantly for these rifles. Then add sales tax on top of that. You get a brand new in box rifle. Comes with evervthing it does from factory including hammer spur, manual and cable lock. Price is $3,250 for one rifle. Your choice of either 45-70 or 30-30. I also have a Limited Edition SBL with green laminate furniture in 45-70 ($3,800). • Grey laminate stock with polished stainless finish • 19” cold hammer-forged stainless steel threaded barrel • High-visibility tritium fibre optic front sight, adjustable ghost ring rear sight Will ship at buyer's expense but priority will be given to local sale in Calgary. No trades. If you contacted me via email, check your junk/spam folder for my reply email. Some people have notified me that it was going to that folder.

categories:GunsSporting Goods

79081 impressions

3637 views

For Sale: Sako 85 Finnlight: a .30-06 Springfield Selling a Sako 85 Finnlight chambered in .30-06 Springfield. This rifle has had less than 20 rounds fired and is in excellent, near-new condition. Model: Sako 85 Finnlight Caliber: .30-06 Springfield Action: Bolt-action Condition: Excellent / like new Round count: Fewer than 20 rounds Lightweight synthetic stock Stainless fluted barrel Smooth Sako action with crisp factory trigger Made in Finland, known for outstanding accuracy and reliability. Scope and sling are NOT included. Rifle has been well cared for, stored properly, and functions flawlessly. An ideal lightweight hunting rifle in a proven caliber. A VALID PAL IS REQUIRED. CASH & EMAIL TRANSFER is accepted as payment. Delivery ONLY around Saskatoon area. Serious inquiries only ABSOLUTELY no holds

categories:GunsSporting Goods

14237 impressions

434 views

*Please leave your phone number or email me directly, not through Townpost. There's an issue with Townpost relaying my reply emails. Can hold for a non-refundable deposit. Can also do a payment plan. Popular and hard to find Marlin Dark Series. Brand new in box. I only took it out of the box to inspect. It has only been function fired by Marlin before leaving the factory as with all Marlin rifles. Comes with everything it does from factory. I also have a new in box Marlin Dark in 45-70 ($3250) and 44 Mag ($3500 - extremely hard to find). - 16” threaded barrel + thread protector - Durable graphite black cerakote - Radial muzzle brake - MLOK butt stock with cheek riser and flush cups - Hammer spur - MLOK & QD handguard - Extended length pic rail - Fiberoptic sights - Cable lock - Mid-sized finger lever for added comfort Will ship at buyer's expense but priority will be given to local sale in Calgary. No trades. If you contacted me via email, check your junk/spam folder for my reply email. Some people have notified me that it was going to that folder.

categories:GunsSporting Goods

4139 impressions

126 views

*Still available if posted* Please include phone # with communications. Best to use text, TownPost messaging with an account works best or request my email. NEW! Savage AXIS II XP 243 Win Bolt Action Rifle w/Bushnell Banner 3-9x40mm scope combo package for sale. All ready to go for target shooting and hunting seasons. I am the first owner of this rifle combo and never fired the rifle. It has a 22” button-rifled barrel, 4 round detachable clip and a user-adjustable AccuTrigger. *SEE MY OTHER RIFLE, RIFLE/SCOPE COMBO, SHOOTING AND HUNTING GEAR ADS* Valid PAL required, will come with transfer # as per new laws. First Paid, First Served.
 Holds only with deposit. Delivery Negotiable.
 Buyer pays for shipping costs and makes arrangements for payment. DESCRIPTION The AXIS II XP offers hunters even better out-of-the-box performance at the same affordable price. This package rifle is loaded with features that deliver tack-driving accuracy on every shot, including the user-adjustable AccuTrigger, thread-in headspacing, and a factory-mounted, bore-sighted 3-9x40mm scope. The button-rifled barrel is well-balanced with the tough composite stock. FEATURES • Rugged synthetic stock • User-adjustable AccuTrigger • Improved ergonomics • Button-rifled barrel • 3-9x40mm scope • Detachable box magazine • Thread-in barrel headspacing SPECIFICATIONS AXIS II XP SKU - 57092 Calibre - 243 Win Barrel Length - 22" (55.88 cm) Rate of Twist - 1:9.25" Mag. Cap. - 4 Magazine - Detach. Box Stock Pull Length - 13.75" (34.93 cm) Stock QD Studs - 2 AccuTrigger - Yes Trigger Adjustable - Yes Trigger Pull Force - Min.2.5 lbs Trigger Pull Force - Max. 6 lbs Length - 42.5" (107.95 cm) Weight - 7.38 lbs (3.35 kg)

categories:GunsSporting Goods

3086 impressions

159 views

Please text anytime 6476871484. Fully functional antique revolver in perfect and ready to shoot condition ,very good action, no PAL needed. Reloadable ammo is available but sold separately Comes with FRT RCMP paperwork. Smith & Wesson 44 Double Action "First Model", .44 Russian This one is in very good condition. With original finish remains, the markings are well visible. The action is strong and accurate, and the cylinder indexes and locks properly. There is minimal side-to-side movement. The bore of the 6 inch barrel is very good, with strong rifling and little signs of wear and use. The original wooden grips are very good and undamaged. There is no wear visible. The front sight has been upgraded with a German silver blade for better accuracy. SN 12499, very good overall.​ History & Background Smith and Wesson's first double action design dates back to at least 1872 - years before Colt ever attempted a double action cartridge revolver. It was mentioned in a letter to the Russian envoy General Orlof, and although the sale to Russia never materialized, it served to pave the way for the very popular and successful line of double action top break revolvers. The .44 Russian model was actually the first to be produced as a prototype, and the last to be released for sale to the public. For this reason there exists a degree of confusion over the proper terminology: the first one to be manufactured for sale was the .38 caliber model, followed by the .32. The .44 caliber model was not released until 1881, and is variably known as the No. 3 Double Action, the Double Action "Navy" (a name Daniel Wesson wanted to keep alive to differentiate this model from the No. 3 single action, and still holding out hope to sell it to the Russian navy), and the First Model Double Action. Originally, the .44 Double Action was made with a 1 7/16 inch cylinder, however an optional .44-40 version was available as of 1886. This required a 1 9/16 inch cylinder, and a longer frame. The firm soon realized that it was too expensive and cumbersome to manufacture two different sizes of frames for what was essentially the same gun, and the shorter cylinder and frame were dropped for the longer one in the early 1890's. The No. 3 frame .44 double action top breaks were dropped from the Smith and Wesson catalogue in 1913.

categories:GunsSporting Goods

7883 impressions

371 views

Specifications - Caliber: .17 WSM   - Heavy stainless barrel - Action: Savage bolt action   - Stock: Boyds Featherweight Thumbhole  - Included magazine: One 8‑round magazine   - Included ammo: One box (50 rounds) Winchester .17 WSM, 25‑grain   - Optics: Scope not included - Condition: Excellent — clean bore, smooth action, well cared for.   “Reason for selling: i don't have anywhere to shoot past 50 yards, and this rifle is built for much more. It’s a waste to keep such a capable setup under‑used, so I’m redirecting the funds into something better suited to my local range.” - Preferred sale: Local sale in Calgary; shipping could be arranged to experience buyer who will arrange shipping at their own cost - Proof required: Valid PAL must be shown at time of transfer; no exceptions.  

categories:GunsSporting Goods

819 impressions

51 views

Howdy Townpost. I've got a number of these brand new Allen slings for sale. The slings I have here are an improvement over the regular Allen Endura. This batch of slings has cam buckles (sometimes called toggle clips) instead of tri-glides. They're easier to use and make attaching the webbing loops to sling swivels really quick and easy. The sling loop sections are longer and could even be used as a carry strap for small logs or something heavy in a pinch. The slings can be adjusted from 28" to 52" so they're quite versatile. The slings are $10 each. I'm currently offering a buy 3 get 1 free deal. The slings are located in SW Calgary and can be picked up almost anytime. I am also happy to ship nationwide, this is of course at the buyer's expense. Shipping these as regular or expedited parcels should be fairly cheap since I can roll up the sling into a little roll and put it into a very small box or mailer. I may be able to ship this as an oversized lettermail if I fold one or two slings flat and get them into a large envelope too. So I expect shipping to be $5-19 depending on what option you go with, where the is the package destination and how many slings you want.

categories:GunsSporting Goods

18324 impressions

469 views

Howdy Townpost! I have a truly amazing one of a kind piece here for sale. I bought this for myself in the US over a year ago and I had it professionally restored and fully repaired. I am now looking to sell it. John Forbes, of Liverpool, was gunmaker to His Royal Highness, the Prince of Wales, later King George IV. And according to my research made mostly dueling and target pistols, and some small pocket pistols for only 5 years. Those years being 1805-1810. He spelt his name with I or Iohn and later switched the spelling to a J or John based on public records and some of the other examples of his dueling pistols that have sold at auction. That makes this a very rare and finely made pistol. This pistol would have cost a small fortune at the time it was made. Oftentimes dueling pistols come in pairs but it was cheaper to buy just one if they were offered as a single, and should you encounter someone who has insulted your honor and you demand satisfaction from them, they can bring their own pistol to the duel. The engraving is extremely fine, intricate and skilled. It would have taken many dozens of hours to complete and it was all done by hand. The engraving features drums, banners and spears, floral patterns, sunbursts on the base plate and lock, and a pineapple in the front of the trigger guard, which symbolizes wealth and status. Because this gun is a percussion conversion of the original flintlock mechanism the percussion hammer is engraved in a different style by a different engraver in a more simple floral and fish mouth style of engraving with gold inlay. Every screw is engraved to look like a flower and the escutcheons are also each engraved like a wreath. Overall there is a lot of fine detail with some simpler and less detailed later additions on the percussion mechanism and one spot on the side plate. The gun features gold inlay on the hammer which largely worn away. There is silver inlay on the outside of the breach, and a sterling silver wreath styled band wrapped around the base of the grip and a sliver bead front sight. The ramrod tip (which is a replacement) is silver plated brass, so too are the front stock cap near the muzzle, the rod pipe, cross key, and escutcheon around it are too. The grip baseplate is silver plated steel. The workmanship of this pistol is certainly of a quality of gunmaker worthy enough of being the gun maker of the Prince of Wales. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it too.

categories:GunsSporting Goods

15573 impressions

465 views

Howdy Townpost! I've got a nice little uncommon and good condition subcompact Remington for sale now! This started its life as a Remington Model 1865 New Model Police as a cap and ball percussion revolver in .36 caliber. Many of these were never percussion guns as they existed in a weird transition period. And Remington made some of them from the ground up as cartridge guns. This one most likely was in inventory as a percussion revolver and was turned into a .38 rimfire cartridge revolver based on the serial number, in my opinion. These are one of the more rare and lesser known Remington cap and ball guns that were made. Remington only made 18,000 between 1865 and 1873. So they are relatively uncommon and scarce gun today. This is actually my personal favorite model of Remington percussion revolver they're a very handy subcompact-sized gun by today's standards they're bigger and much more comfortable in the hand in the grip than the pocket models but nice and light unlike the full size military .44s and they point very naturally. This particular example is in very good condition the nickel is a very high percentage of coverage some of the original silver plate is still visible on the trigger guard and some of the low areas. The color case hardening is still very colorful and defined on the hammer (pictured). The grips have been refinished but they are the originals. The wood grain is very interesting and beautiful in my opinion. The bore is in excellent condition especially for a Civil War era black powder firearm. This was likely carried in a police officer's holster and not fired much. It was well taken care of and the clean and good condition bore and chambres are reflection of that. The the mechanical function of this firearm is excellent as well. When I got the firearm it was actually in amazing condition to begin with and the mechanical function was perfect. It locks up and times perfectly. The hammer and the trigger pull are very crisp, light and smooth. And didn't require any adjustment, Remington did the job and they did it right the first time. The entire revolver has been taken apart and given a gunsmith's cleaning and was reassembled and lightly oiled. I came across a nice little Hunter leather holster at a gun show and found that it fit this gun very well so it's included as a freebie with the gun (pictured). The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

14872 impressions

823 views

Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.

categories:GunsSporting Goods

24510 impressions

857 views

Here is a Canadian/British origin and the C broad arrow marking), and cross-referencing the images (including the faint stamping that reads “Z.L.&T. LTD 1940” along with the C broad arrow symbol), this is an original Canadian WWII Pattern 1937 (P37) web pistol holster. Features •  Khaki/tan heavy cotton canvas construction, typical of British/Commonwealth web gear from the era to save on leather due to wartime shortages. •  Flap closure with brass snap (often called a “lift-the-dot” fastener in some variants). •  Brass or metal belt hanger and loops on the back for attachment to P37 web belts or pistol belts. •  Angled design for right-side hip carry, with a reinforced muzzle end. •  Markings: “Z.L.&T. LTD 1940” refers to the manufacturer Zephyr Looms & Textiles Ltd. (Toronto, Canada), a known WWII contractor for Canadian military gear. The “C broad arrow” (often stylized as C↑ or C with an arrow inside) is the Canadian government property/acceptance mark, indicating it was issued for Canadian forces (part of the British Commonwealth system, where the broad arrow denotes ordnance property, and the “C” specifies Canada). This holster was designed primarily for revolvers like the Webley Mk IV .455 or Enfield No. 2 .38, which were standard for Canadian troops early in WWII. However, similar P37 holsters were also used or adapted for the Canadian-made Inglis Browning Hi-Power 9mm pistol (produced from 1944 onward). Original Canadian WWII P37 canvas holsters in good used condition (like this one, with intact hardware and no major tears) typically sell for $150–$350 on sites like eBay, GunsInternational, or militaria forums/auctions. Factors influencing price include: Rarity of the early 1940 date (pre-U.S. entry into the war, during the British Commonwealth’s initial buildup). Clear markings (the C broad arrow and manufacturer stamp add provenance). Condition: This appears solid but field-used, so more toward the $200–$300 range. Recent comparable sales include similar Z.L.&T. Ltd.-made holsters from 1943–1945 fetching $200–$300. Can ship anywhere in Canada Please see my other ads for collectable military accessories.

categories:GunsSporting Goods

8670 impressions

154 views

*Please leave your phone number or email me directly, not through Townpost. There's an issue with Townpost relaying my reply emails. Can hold for a non-refundable deposit. May be able to do a payment plan. Features: • Black Magpul ELG stock • Cheek riser • Storage compartment with 6rd quiver • Stainless steel construction • Satin stainless finish • 16.1” threaded barrel • Large lever loop • Match-polished thread cap • Adjustable skinner sights • 3 spacers to adjust length of pull • 7 round capacity • Crossbolt-style safety • Hammer spur extension Will ship at buyer's expense but priority will be given to local sale in Calgary.

categories:GunsSporting Goods

851 impressions

52 views

Superb French flintlock pistol, typical of the handguns used in the 18th century by officers and travelers. This model features a solid wood stock with a natural patina, as well as a well-preserved steel flintlock. The short, flared barrel, combined with its robust mechanism, makes it an iconic piece of close-range defense weaponry from the period. Features: • Type: Flintlock pistol • Origin: France • Materials: Wood and steel • Approximate length: 20 cm / 8 inches • Condition: Good overall condition for its age, mechanism present, authentic signs of wear • Authenticity: Original piece, not a replica Highlights: • Ideal for collectors, museums, or military history enthusiasts • Beautiful patina and period details • Rare and sought after by antique weapon enthusiasts Price: $1,295 Delivery: Secure packaging, shipping available See our other weapons for sale! Contact us for more information or additional photos!

categories:GunsSporting Goods

312 impressions

30 views

*Please leave your phone number or email me directly, not through Townpost. There's an issue with Townpost relaying my reply emails. Can hold for a non-refundable deposit. Can also do a payment plan. Popular and hard to find Marlin Dark Series, especially in this caliber. Very few of these 44 Mag in Canada. Brand new in box. I only took it out of the box to inspect. It has only been function fired by Marlin before leaving the factory as with all Marlin rifles. Comes with everything it does from factory. I also have a new in box Marlin Dark in 30-30 ($3250) and 45-70 ($3250). - 16” threaded barrel + thread protector - Durable graphite black cerakote - Radial muzzle brake - MLOK butt stock with cheek riser and flush cups - Hammer spur - MLOK & QD handguard - Extended length pic rail - Fiberoptic sights - Cable lock - Mid-sized finger lever for added comfort Will ship at buyer's expense but priority will be given to local sale in Calgary. No trades. If you contacted me via email, check your junk/spam folder for my reply email. Some people have notified me that it was going to that folder.

categories:GunsSporting Goods

6500 impressions

176 views

Superb flintlock blunderbuss from Syria, an iconic weapon of the 18th and 19th centuries, used for close-range defense and naval combat. This model is distinguished by its flared barrel, typical of blunderbusses, allowing for a wide dispersion of projectiles. The wooden stock features handcrafted engraved motifs, and the brass fittings add a touch of oriental elegance. The flintlock is well preserved, with hammered metal details that attest to its authenticity. Features: • Type: Flintlock blunderbuss • Origin: Syria • Materials: Wood, steel, and brass • Approximate length: 24 inches • Condition: Good overall condition for its age, with a beautiful patina and functioning mechanism • Authenticity: Original piece, not a replica Highlights: • Rare and sought after by collectors of oriental weapons • Decorations and finishes typical of the Syrian style • Ideal for collection, exhibition, or historical reenactment Price: $2,995 Delivery: Secure packaging, shipping available See our other weapons for sale! Contact us for more information or additional photos!

categories:GunsSporting Goods

226 impressions

40 views

01.Benelli M1/M2/Super 90 20 GA, 24 inch Fully Rifled Barrel, Realtree Advantage Timber HD camo pattern with Rifled sights-$850.00 02.Benelli M1/M2/Super 90 12 Gauge Matte 24" Rifled Slug Barrel,with Rifled sights.-$750.00 03.Benelli M1/M2/Super 90 "E.R Shaw Custom" 12 Gauge Matte 24" Rifled Slug Barrel,with Rifled sights.-$700.00 04.Benelli M1/M2/Super 90 12GA. Camo MAX-5 24" Fully rifled Crio barrel with sights. Rear sight adjustable.-$750.00 05.Benelli SBE 1 or 2 (Super Black Eagle) 12 GA. 24 inch fully rifled Crio barrel with sights. Rear sight adjustable. Black.-$850.00 06.Beretta Vitoria Pintail (ES100) 28 inch barrel, 3 inch chamber, threaded for screw in Beretta Mobile chokes.-$550.00 07.Browning Maxus 12 GA. 22" Fully Barrel with Cantilever. Black, Matte.-$580.00 08.Beretta 680 series O/U 32" ,2 3/4",12 gauge unsingle Trap barrel with HI vent rib (Beretta mobile chokes).-$1500.00 09.Beretta 680 series O/U 34" Fixed Full,ported,2 3/4",12 gauge unsingle Trap barrel with HI vent rib.-$1500.00 10.Beretta DT-10 (DT11) 12ga.34” ventilated rib Mono Top XTrap OptimaBore barrel with a bright excellent bore.-$2500.00 11.Henry AR-7 US Survival Semi-Automatic Rifle 22lr barrel Assembly-$150.00 12.Remington 870 Wingmaster 26 inch barrel, fixed Skeet choke for 2-3/4 shells.-SOLD 13.Hatsan Escort pump Camo 12 GA 22-inch,3″ slug/turkey Fixed CYl choke cantilever smooth bore barrel(not a rifled)-$150.00 Brand New. 14.Hatsan Escort Semi Auto Camo 12 GA 24-inch vent rib,3″ slug/turkey smooth bore barrel with screw in chokes(not a rifled)-$150.00 15.Zastawa 22 WMR barrel with sights removed-$100.00 16.Marlin-30″ round 12 GA fixed Mod.choke-$60.00 (Model 1898 made in the period 1898-1905). 17.Remington 1100 26″ Simmons vent rib, 28 ga fixed choke skeet barrel. Convert your Remington 1100 12 gauge to 28 gauge.-$250.00 18.Beretta Model 425 12 GA Side by Side.30" barrels choked Mod/Full-$1200.00 19.Sako Quad Varmint Barrel .22 Magnum 22 Inch with magazine. Brand new.-SOLD 20.Sako Quad Varmint Barrel .17 Mach-2 22 Inch with magazine. Brand new.-SOLD 21.Mossberg 500 Max 5 camo 24"/12GA/3" Fully Rifled Canteliver Barrel. Brand new.-$300.00 22.Mossberg 500 Max 5 camo 24"/12GA/3" Rifled Turkey Barrel wit X-Full choke.-$275.00 Local is preferred, but will ship at buyers expense.Further Lost insurance can be purchased by the buyer. Sold as is, no returns.ALL SALES FINAL. Please send message to: medal1958@gmail.com

categories:GunsSporting Goods

152482 impressions

8943 views

Brand new never fired gun in original box. Just out of box for taking pictures. Features Caliber: 7mm Remington Magnum Action: Bolt Capacity: 3+1 Finish: High Polished Blued Barrel: 24” Carbon Steel 1:9 25” Twist Length of Pull 13.5" Overall Length 44.5" Blind Internal Magazine X-Mark Pro Externally Adjustable Trigger Drilled and Tapped Receiver The rock-solid receiver is drilled and tapped for scope mounts and houses the externally adjustable X-Mark Pro Trigger 2 Position Safety Weight: 6.5 pounds C-Grade Walnut stock with Fleur de Lis Checkering & Hi-Gloss Finish Classic American Style Engraving and Gold Inlay Bronze Inlayed Commemorative Medallion Grip Cap Sling Swivel Studs Steel Floorplate Limited to Quantity of 2016 Special Serial Number New England Custom Sights Gun Custom Box Shipping and insurance available and on buyer. Open to trades with the same value

categories:GunsSporting Goods

60543 impressions

2611 views

Up for sale is a premium-condition Factory 26 NORINCO SKS Type 56, one of the most desirable and collectible Chinese SKS variants. This rifle has all matching numbers, an excellent shiny bore, and comes with its original accessories, making it superior to the standard surplus SKS offerings including  original box. Sling and two more clippers included in the package.  If local pickup then one box of non corrosive amo (7.62×39) included. Caliber: 7.62×39 Barrel: 20.5” chrome-line                                           Class: Non-Restricted (PAL required) ALL visible serial numbers match including magazine. Up for sale is a premium-condition Factory 26 SKS Type 56, one of the most desirable and collectible Chinese SKS variants. This rifle has all matching numbers, an excellent shiny bore, and comes with its original accessories, making it superior to the standard surplus SKS offerings. The rifle features: Semi-automatic, gas-operated action Blued finish with silver bolt & carrier Hooded post front sight, U-notch adjustable rear sight Two-piece military wood stock with finger-grooved forearm Checkered brown polymer handguard Cleaning rod, sling swivels, smooth steel buttplate with trapdoor cleaning kit Attached cruciform folding bayonet (correct for Factory 26 rifles) This is not your average SKS — it’s a well-preserved, early-pattern military example with collector appeal. Condition Bore: Excellent, bright & shiny Metal: Only slight handling marks and tiny scratches — no rust or pitting Wood: Only mild storage marks, no cracks Fully functional, smooth action, strong lockup Bayonet fully intact and operates properly Stored carefully and handled minimally. This is a rifle that will stand out in any SKS collection. Comes With (Complete Kit) Original box Oiler bottle Stripper clip Cleaning rod Cleaning kit in buttplate Bayonet (installed) For a serious buyer  included are a SKS original sling and additional clipper. Hard to find SKS examples that are this complete — most rifles are missing at least one or two items. Price $950 (Price reflects matching numbers, Factory 26 production, excellent bore, and full accessory kit. Serious buyers only.) PAL Required. PAL will be verified. FTF meetup and cash or EMT payment options considered. Can ship, we can discuss options. Valid Canadian PAL required. Local meet preferred. Other options will be considered.

categories:GunsSporting Goods

5690 impressions

439 views

HAVE THE FOLLOWING RIFLE & PISTOL RELOADING DIE SETS FOR SALE: PRICES ARE IN THE AD / SHIPPING IS AT CANADA POST ACTUAL COST TO THE BUYER ALL DIES ARE IN VERY GOOD GENTLY USED CONDITION WITH NO DAMAGE OR MISSING PARTS A FEW HAVE VERY MINOR SURFACE RUST AND ALL COULD USE A THOROUGH CLEANING BONANZA: - 25.06 BENCH REST 3 DIE SET + BENCH REST SEATER & HORNADY NECK DIE $60 HORNADY: - 7MM STW FL 2 DIE SET #54440 SERIES IV CUSTOM NEW DIMENSION $50 LYMAN: - .243 / 2 DIE SET WITH INSTRUCTIONS IN A RED PLASTIC BOX $50 RCBS: -. 30/30 - 2 Die FL SET #14601 VGC W/INSTRUCTIONS $50 - .17 REM - 2 Die SET #32001 (SPECIAL ORDER) VGC W/SHELLHOLDER $40 - .41 MAGNUM - 4 DIE SET WITH LYMAN TC 41 MAG FL DIE + INSTRUCTIONS + LYMAN X30 SHELLHOLDER & XTRA SEATER PLUG $60 ADDITIONAL PICTURES ARE AVAILABLE UPON REQUEST. DIES WILL BE SHIPPED WITH FULL INSURANCE & TRACKING WILL COMBINE SHIPPING ON MULTIPLE PURCHASES LOCAL PICK-UP IS AVAILABLE IN THE ST. THOMAS AREA PLEASE SEE MY OTHER ADS FOR ADDITIONAL RELOADING EQUIPMENT

categories:GunsSporting Goods

42585 impressions

1938 views