Original Lee-Enfield No.4 Mk I top guard set, purchased from Numrich Gun Parts (USA) back when they carried original surplus parts. No visible maker stamps; includes the metal muzzle cap as shown. Structurally sound and ready for restoration or use in a parts build. Sold as pictured. No trades. Will ship on buyer's dime.

categories:Sporting GoodsGuns

8573 impressions

424 views

Not interested in trades. Lee-Enfield No. 4 Mk 1(T) Sniper (Holland & Holland Conversion): No. 32 3.5X Telescopic Sight & Transit Box w/ original US M1907 Leather Sling and Leather Telescope Lens Cover, original Binoculars, original Spotting Telescope & Leather Case, original Sniper's Veil.  All numbers matching (rare) on rifle/telescope (& even Transit Box!). The No. 32 telescope turrets both function and the bore is mirror-like. Was prized in WWII for its reliability, accuracy and high rate of fire. Museum worthy! NB: The transit box identifies not only the rifle's serial number but the telescope's serial number which I had never seen in 40 years of becoming familiar with authentic and matching numbers Mk 4 No.1(T). Here is link identifying all required stamps and locations validating authenticity, as per Mk 4 No.1(T) aficionado, Captain Colin MacGregor Stevens: "No.4 MK. I (T) Sniper Equipment Markings – www.captainstevens.com"

categories:Sporting GoodsGuns

1302 impressions

171 views

In all origial condition is a British Lee-Enfield NO 4 MK1 in 303 British. The rifle was sent back to the Fazakerley Factory for rebuild in 08/43. The bore is a bit dark but has great rifling. The wood is solid but with many dings and dents. Text or call 778-909-7110

categories:Sporting GoodsGuns

14882 impressions

694 views

Lee-Enfield No 1 Mark 3 303 British Bolt Action with Magazine

categories:Sporting GoodsGuns

72853 impressions

7332 views

Wow, here’s something that you don’t see everyday an Enfield-manufactured Lee-Enfield No. 1 Mk. III bolt-action shotgun. 25" barrel with bright bore chambered 410 Musket. Full-wood stock that comes with a detachable magazine! (Usually missing and single shot with a wooden block). Comes with period correct canvas sling. Factory open sights. Finish off your Enfield collection with this beautiful piece or add it in. This one is unique! Bayonet add $225* * I will except payments if needed Will Ship anywhere in Canada,

categories:Sporting GoodsGuns

92533 impressions

3366 views

Hello I have .303 Jungle Carbine Looking to replace complete bolt can’t seem to find replacement if anyone has spare parts laying willing to sell it I’ll buy it for right price

categories:Sporting GoodsGuns

13221 impressions

721 views

Hello I have .303 Jungle Carbine Looking to replace complete bolt can’t seem to find replacement if anyone has spare parts laying willing to sell it I’ll buy it for right price

categories:Sporting GoodsGuns

12750 impressions

508 views

Original wooden bottom stock guard / furniture for a Lee-Enfield No.4 Mk I. Purchased new-from-surplus via Numrich Gun Parts (USA), this is a genuine period-style part (not a modern reproduction), suitable for collectors restoring a No.4 Mk I or for someone looking to keep a build authentic. Stamped ‘F’ — likely Fazakerley ROF, appears to be beech. Please text or email for additional information/pictures. No Trades. Stock is located in North Battleford. I regularly travel between Calgary, Edmonton, Red Deer and Saskatoon and can meet at a mutually convenient midpoint. If any of those cities work for you I can arrange to meet there or somewhere in between along the route. Please suggest a location and time and I’ll do my best to accommodate.

categories:Sporting GoodsGuns

10350 impressions

455 views

Lee-Enfield sporter stock — wooden sporter conversion stock for Lee-Enfield No4 Mk1. The grain and colour look like birch, which would be consistent with some Long Branch conversions/parts. Metal butt plate, butt stock bolt (seen pictured inside butt stock) and sling swivels included. Vintage/service wear and handling marks present; structurally sound for fitting or restoration. Sold as pictured. Local pickup available (Calgary / Edmonton / Red Deer / Saskatoon) or I can provide shipping quotes.

categories:Sporting GoodsGuns

10819 impressions

563 views

Swedish Mauser action with Husqvarna barrel in 30.06, Sporter stock in good condition with butt pad cushion, swivel mounts, semi pistol grip with base cap. Knurling is in good condition. Adjustable rear sight for elevation. Overall good condition. Receiver is tapped for scope mount bases. All Swedish Mausers other than trials rifles were chambered for the 6.5×55mm Swedish cartridge, and all Swedish-made actions were proof-tested with a single 6.5×55mm proof round developing approximately 455 MPa (65,992 psi) piezo pressure (55,000 CUP).[4][5] Swedish Mausers were manufactured by Waffenfabrik Mauser AG in Oberndorf a/N in Germany and in Sweden by Carl Gustafs Stads Gevärsfaktori and Husqvarna Vapenfabriks Aktiebolag. All Swedish Mausers, whether built in Germany or Sweden, were fabricated using a Swedish-supplied high grade tool steel alloyed with nickel, copper, and vanadium, a product then noted for its strength and corrosion resistance. These rifles, like other pre-M 98 system Mauser rifles, lack the third safety locking lug at the rear of the bolt and feature "cock-on-closing" (similar to the contemporary Lee–Enfield rifle). CFP/RCMP courtesy of Bill C-71 require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Sections 99 & 101 of the Criminal code.

categories:Sporting GoodsGuns

51699 impressions

2933 views

The Enfield L39A1 is a British military target/match rifle developed in the late 1960s by the Royal Small Arms Factory (RSAF) Enfield. It was essentially the open-sights counterpart to the L42A1 sniper rifle (which used a telescopic sight), both built on converted Lee-Enfield No. 4 actions rechambered and rebarreled for 7.62×51mm NATO (.308 Winchester compatible). This rifles overall commission isn’t very good shape from the wood to the bore. You will not be disappointed in this precision shooting platform. Ready for your collection or the range.  Key Specifications •  Caliber: 7.62×51mm NATO (uses standard 10-round magazines, often Sterling-pattern or Enfield-specific). •  Action: Bolt-action, modified No. 4 receiver (machined for 7.62 magazine clearance, new bolt face/extractor, etc.). •  Barrel: Heavy, free-floating, 27.5 inches, hammer-forged for precision and heat resistance. •  Sights:  Fitted with adjustable aperture target sights the Parker-Hale PH5C (or PH5E4/PH4/47 variants) on the receiver— (PH·5C marking, vernier scale, knurled knobs). •  Stock: Shortened/widened fore-end, often with a standard No. 4 butt (some had high-comb target stocks in commercial versions). •  Weight/Length: Heavier than a standard No. 4 (~10–11 lbs), overall length around 44–45 inches. •  Accuracy: Excellent for its era—sub-MOA potential with good ammo (e.g., 168gr match loads). Can ship anywhere in Canada, Please see my other ads for rare and collectible, firearms and accessories. 

categories:Sporting GoodsGuns

1660 impressions

147 views

WTB Interested in finding a complete replacement wooden Monti-carlo stock set for a Lee-Enfield 303 No.1 (smle) III - date 1946. Looking to upgrade the current stock with modern wood with matching butt and forearm stocks. e.g. Parker Hale rifle stocks (wood) Any help will be appreciated - thank you in advance.

categories:Sporting GoodsGuns

3021 impressions

142 views