Selling a post WW2 Canadian Highpower Holster and Belt. Will work well with any similar sized gun. Overall decent condition, regular wear from use. Selling for $25. Shipping available in flat-rate box at buyers expense. Disclaimer: this item is sold as is and the description is given to the best of my ability and knowledge. Feel free to ask any questions and I will do my best to assist in any way possible. Do not buy this item if you are not sure about it as no refunds will be given.

categories:GunsSporting Goods

15720 impressions

660 views

Black Commercial Universal Pistol Holster Nylon Construction, One SIze Fits all, $25 Buyer pays shipping

categories:GunsSporting Goods

378 impressions

22 views

Siderlock Safety Trigger Kit. Designed to fit Glock Gen 1-4 Models: G17, G17L, G18, G19, G29, G29SF, G20, G20SF, G21, G21SF, G22, G23, G24, G25, G26, G27, G28, G30, G30S, G30SF, G31, G32, G33, G34, G35, G36, G37, G38, G39, G40, G41, G42, G43X, G47, G48. Does Not Fit: Gen 5 Models. Siderlock Safety Trigger's Help Prevent Accidental Discharge!! The Glock pistol has a combination of three automatic safety features (trigger safety, firing pin safety and drop safety), which are sequentially disengaged when the trigger is pulled. The central pivot of the trigger is the first safety mechanism to disengage when the trigger is pulled and therefore the most important. The safety pin of the Siderlock trigger is a precise positioning system and when engaged blocks the movement of the central pivot avoiding an accidental discharge of the weapon. The Siderlock trigger offers the option of keeping the pistol in its original firing configuration simply by not engaging the lock. The Siderlock concept is simple: With a push on the safety pin a sliding pin acts to block or release the movement of the central pivot of the trigger, where by avoiding an accidental discharge when the slide is in the block position, and behaves exactly as the original Glock trigger when in the release position, all the while maintaining the original manufacture specifications. Once the Siderlock trigger is installed on the pistol, firing is accomplished by sliding the safety pin to the left prior to pulling the trigger. Preventing firing is obtained by simply sliding the safety pin to the right (Right hand Shooter assumed). For left-handed shooters, simply remove and invert the safety pin using the tools and instructions provided with the Siderlock trigger. No matter which position the slide is in it never extends beyond the trigger guard, avoiding any accidental contact with the holster ether inserted or withdrawn. Siderlock adheres to the same high manufacturing standards as Glock, using only high quality materials, a simple design and construction process, and therefore is guaranteed for life. Features: Replaces factory trigger. Adds an extra measure of safety. Avoids an accidental discharge. Maintains Glock original specifications, and fits all Glock Gen 1-4 models. Easy installation, includes detailed instructions and images. Ambidextrous and dismantled. High quality materials. Does NOT fit Gen 5 Models. See our complete line of Glock Products here Note: NDZ always recommends any part be installed by a qualified and trained gunsmith. NDZ promotes the use of safety practices and gear when working on any firearm. DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. Proposition 65: Click for Proposition 65 Warning Product Features Manufacturer: Siderlock Type: Trigger Safety Accessory Model: Safety Trigger Country/Region Of Manufacture: Made in USA Color: Black For Gun Make: Glock For Gun Generation: Gen 1-4 For Gun Model: G17, G17L, G18, G19, G29, G29SF, G20, G20SF, G21, G21SF, G22, G23, G24, G25, G26, G27, G28, G30, G30S, G30SF, G31, G32, G33, G34, G35, G36, G37, G38, G39, G40, G41, G42, G43X, G47, G48 Does Not Fit: Gen 5 Models

categories:GunsSporting Goods

18657 impressions

497 views

Brand new Multi holster 2 in 1. IWB and OWB Smith & Wesson M&P Shield 9/40 w/LG489 G Style: Multi 2in1 OWB/IWB Pancake Color: Black CalcuttaMulti Right Hand with 1.75" Belt loop

categories:GunsSporting Goods

42509 impressions

1990 views

Everything for 50

categories:GunsSporting Goods

5386 impressions

623 views

Howdy Townpost! I've got a nice little uncommon and good condition subcompact Remington for sale now! This started its life as a Remington Model 1865 New Model Police as a cap and ball percussion revolver in .36 caliber. Many of these were never percussion guns as they existed in a weird transition period. And Remington made some of them from the ground up as cartridge guns. This one most likely was in inventory as a percussion revolver and was turned into a .38 rimfire cartridge revolver based on the serial number, in my opinion. These are one of the more rare and lesser known Remington cap and ball guns that were made. Remington only made 18,000 between 1865 and 1873. So they are relatively uncommon and scarce gun today. This is actually my personal favorite model of Remington percussion revolver they're a very handy subcompact-sized gun by today's standards they're bigger and much more comfortable in the hand in the grip than the pocket models but nice and light unlike the full size military .44s and they point very naturally. This particular example is in very good condition the nickel is a very high percentage of coverage some of the original silver plate is still visible on the trigger guard and some of the low areas. The color case hardening is still very colorful and defined on the hammer (pictured). The grips have been refinished but they are the originals. The wood grain is very interesting and beautiful in my opinion. The bore is in excellent condition especially for a Civil War era black powder firearm. This was likely carried in a police officer's holster and not fired much. It was well taken care of and the clean and good condition bore and chambres are reflection of that. The the mechanical function of this firearm is excellent as well. When I got the firearm it was actually in amazing condition to begin with and the mechanical function was perfect. It locks up and times perfectly. The hammer and the trigger pull are very crisp, light and smooth. And didn't require any adjustment, Remington did the job and they did it right the first time. The entire revolver has been taken apart and given a gunsmith's cleaning and was reassembled and lightly oiled. I came across a nice little Hunter leather holster at a gun show and found that it fit this gun very well so it's included as a freebie with the gun (pictured). The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:GunsSporting Goods

15483 impressions

867 views

Here is a Canadian/British origin and the C broad arrow marking), and cross-referencing the images (including the faint stamping that reads “Z.L.&T. LTD 1940” along with the C broad arrow symbol), this is an original Canadian WWII Pattern 1937 (P37) web pistol holster. Features •  Khaki/tan heavy cotton canvas construction, typical of British/Commonwealth web gear from the era to save on leather due to wartime shortages. •  Flap closure with brass snap (often called a “lift-the-dot” fastener in some variants). •  Brass or metal belt hanger and loops on the back for attachment to P37 web belts or pistol belts. •  Angled design for right-side hip carry, with a reinforced muzzle end. •  Markings: “Z.L.&T. LTD 1940” refers to the manufacturer Zephyr Looms & Textiles Ltd. (Toronto, Canada), a known WWII contractor for Canadian military gear. The “C broad arrow” (often stylized as C↑ or C with an arrow inside) is the Canadian government property/acceptance mark, indicating it was issued for Canadian forces (part of the British Commonwealth system, where the broad arrow denotes ordnance property, and the “C” specifies Canada). This holster was designed primarily for revolvers like the Webley Mk IV .455 or Enfield No. 2 .38, which were standard for Canadian troops early in WWII. However, similar P37 holsters were also used or adapted for the Canadian-made Inglis Browning Hi-Power 9mm pistol (produced from 1944 onward). Original Canadian WWII P37 canvas holsters in good used condition (like this one, with intact hardware and no major tears) typically sell for $150–$350 on sites like eBay, GunsInternational, or militaria forums/auctions. Factors influencing price include: Rarity of the early 1940 date (pre-U.S. entry into the war, during the British Commonwealth’s initial buildup). Clear markings (the C broad arrow and manufacturer stamp add provenance). Condition: This appears solid but field-used, so more toward the $200–$300 range. Recent comparable sales include similar Z.L.&T. Ltd.-made holsters from 1943–1945 fetching $200–$300. Can ship anywhere in Canada Please see my other ads for collectable military accessories.

categories:GunsSporting Goods

9195 impressions

165 views

This is an original U.S. military M1916 hip holster designed for the Colt M1911 or M1911A1 .45 ACP pistol, widely issued during World War II (and earlier in WWI). Key Identifying Features •  Embossed “US” in an oval on the flap (standard for U.S. Army-issue holsters). •  Brown leather construction. •  Brass flap stud. •  Belt hook on the reverse. •  Leg tie-down thong (the rawhide or leather lanyard loop at the bottom). This shows honest wear (scuffs, dryness, some cracking, and patina), which is consistent with wartime use rather than a modern reproduction (repros are usually cleaner and often explicitly marked as such). Original WWII M1916 holsters in good to very good used condition typically sell for $150–$300 on sites like eBay, GunBroker, or militaria dealers. I am happy to ship this Anywhere. Please see my other ads for rent and collectable military items.

categories:GunsSporting Goods

6391 impressions

155 views

This S&W No 2 .32 RF tip up barrel revolver is in VG-EX condition,both mechanically and cosmetically. It has a 5” barrel with light scattered pitting in the bore and 8/10 rifling VG+ shiny bore. The barrel/receiver break hinge is undamaged with no play,lock up is tight. No pitting on the frame,blueing is an honest 50%,grips in VG shape with no visible damage,no chips,gouges etc,just normal wear possibly revarnished if anything. Cylinder retains sharp teeth and Pitt free chambers,index & timing are perfect and hammer holds full cock strongly. Cylinder spins freely between hammer rest and full cock. This also comes with a period correct leather holster which is in VG+ shape,no tears,original stitching still in VG shape,it has been treated with Neatsfoot oil by myself to retain the leather’s suppleness as well as conditioning the stitching. Historically this type of mid size waist coat revolver was carried by Wild Bill Hickok as a gambling gun and a back up to his pair of Colt Navy .36 cap & ball revolvers. FRT VERIFICATION PAPERS INCLUDED NO PAL REQUIRED/ SHIPPING INCLUDED/ NO TRADES /PRICE FIRM / PROOF OF AGE (18) REQUIRED

categories:GunsSporting Goods

1015 impressions

85 views

Antique status Swiss 1882 manufacturered by Waffen Bern. One of the most sought after antiques, this revolver is chambered in 7.5 Swiss ordnance which is still available from Fiocchi. This revolver is commonly used with .32 sw longs, although the cases may bulge. S&B .32 longs is not recommended as the case rims are smaller than normal and may cause light strikes, all other brands are functional. The revolver itself is in very good condition, lockup and timing are tight. The bore is shiny as most of these revolvers are. Bluing is in good shape. The gun comes with a custom western quick draw holster that is formed to the gun, with the standard right hand attachment point or the holster can be swapped to the left side for a reverse draw set up. Pick up available, shipping included with insurance on buyer. Good pistol for bushwhacking and ranch carry. The gun will also come with a copy of the frt and a hard case. Please inquire if you need more pictures. Cash or etrasfer only. No pal required, just proof of over 18 Please check with a gunsmith before firing any antique firearm for the first time

categories:GunsSporting Goods

1832 impressions

119 views

Quality leather custom-made Mares Leg holsters. Stock cover/cartridge holder. Different colors, styles, and options. Add custom tooling, Initials, or brands. Prices start at $200

categories:GunsSporting Goods

75690 impressions

6319 views

Custom leather holsters. Left or right hand. Initials, brands, logos. See my other ads for more pictures. If you have an idea for something original let me know.

categories:GunsSporting Goods

35549 impressions

1897 views

Hi there patriotic Canadians, just a brief rundown of what kind of person I am and what I am after; fully understanding our constitutional rights is important as it completely contradicts any or most current thug like bans or officials ways of lying and trying to convince society we have no rights to own firearms responsibly it has been a right under God or a Born unto by every good Canadian who has earned the ability to responsibly use and or own any firearm within reason and certainly if we have paid our dues as those who have spent most of our lives protecting other Canadians where firearms are not used to defuse situations as it is a known fact this almost always makes things worse and more dangerous which is exactly why people like that who are responsible and understand that responsibility don’t need some bureaucrat who has never handled a firearm dictate to me or you if it’s some privilege that mommy and daddy are letting us maybe have sometimes a little; it utter nonsense we are better people and not criminals like the ones who pass these archaic “laws” and criminals making laws clearly don’t make them legal. All of this out of the way I hope I can find and deal with the right people potentially an old timer who has an older collection of my favorites like the antique 6 shooters single & double action, I have been searching for a good condition grandfathered type short barrel 38/22/44/ namely but not strictly I simply require or would like to meet or find a like minded person who is willing to part with a nice potentially original out of their collection to hand down ideally I am after makes and models like the Smith & Wesson/colt single army/Ruger and Taurus model types if we are speaking strictly collectors deep history antiques, Wanting ideally, a good .38 short revolver action that is either already no longer reg. traced or an updated 1930s-1960s model whether it a detective issue snub or a regular issue short barrel 6 shooter that still has a speed loader option or preferably a modified reconstruction and has a side gate loader for single rounds as these are the most utilitarian and essential esthetics. Good or some worn condition I’d expect in fact I prefer a good harms arm to have some wear showing it has reliability and is still fully calibrated and comes as is no need for bells and whistles just a feel good reliable piece that will out last another generation to come. If anyone is a serious owner and collector discreetness is also a right and key in this or any trade and I would hope to keep any dealings private as possible as is our God given rights as RPAL lifetime holders, my offers for a good piece and especially with its holster/belt and any extras I am open to trading some rare estate solid gold signet and precious gem men’s rings which from recent informal appraisals were multiple times the gold values even though the contents and purity are already above any nonsense from a sissy jewelry store chain. My items and rarities are very old well kept and made for a man who wants something of value for example one is a full set Blue Boulder Opal from a small family owned mine in the Australian Outback it’s one of a kind in the world and I am auctioning this one for sure again as last time it had a fins of traction I just did not get enough eyes on it and the auction slot paid for was too short otherwise I was very close to getting an extremely generous offer, but was unable to locate the bidder before it finalized such as are all silent “A”s I also have Solid gold bullion cuff that exceeds 2 ounces of 999.9 of the purest gold which can be shaped, clipped for divided uses even turned into other pieces with its content. I also have constitutional USA silver 90% dimes, and more bullion silver and some very old antique pieces going back hundreds of years. of course Cash talks and I am willing to do a straight cash deal split or show what other great items I have and own including prepper gear wonderful older leather 1800s style jackets and other small priceless artifacts such as meteor fragments and the likes. I’m sure based on my listing of potential items to trade for a decent .38 antique form revolver or something of similar greatness we can come to a more than fair even mutually beneficial trade again I respect peoples privacy and in any deals as long as it’s within our constitutional rights as the Law Abiding Canadians we are and shall always be allowed to do business at our hearts content going far back into our own heritage when trades like these were common place and no jackboot ever had a place nor legal grounds to meddle in our affairs: Remember nothing has changed we have just been told to forget. I’m not going to forget my God given rights and I hope you don’t either we all deserve them as freeborn People’s of Canada and Beyond. Please contact me as soon as you feel like throwing fisticuffs lol or just making some offers

categories:GunsSporting Goods

1695 impressions

116 views

This is an excellent single action Smith & Wesson New. Model 3 in .44 Russian. This is an early production pistol as noted by the 4 digit serial number. This pistol is in superior condition given its age. The mechanics are excellent and the bore and chamber, though showing the typical evidence of black powder use, are in extremely good condition with strong rifling. Some original blue remains in protected areas with the balance faded to a very nice patina. It comes with a rare and highly collectible H.H. Heiser 3 loop antique holster which is probably not as old as the pistol itself. Overall, a highly collectible and desirable pistol. As with all antiques, no PAL or registration is required.

categories:GunsSporting Goods

3080 impressions

233 views

This is from the estate of my late father in law, who was an avid gun collector. No this is not in pristine museum quality condition. Prices reflect condition. Offers may be considered, but low ballers will be ignored or told to F off. If you don't like the price keep scrolling. This is filled by bulk C02 not the disposable canisters.. comes with home made leather holster ser# 320546

categories:GunsSporting Goods

11530 impressions

629 views

Classic DeSantis “Cozy Partner” inside-the-waistband (IWB) leather holster in tan — molded to fit full-size Glock footprints (commonly fits Glock 17 and Glock 22). Clean, comfortable option for drawing your firearm from the concealed carry setup. No trades. Will ship on buyers dime.

categories:GunsSporting Goods

6146 impressions

310 views

Right handed shoulder holsters. Fits most automatics. 2 mags holders on other side. Also ankle holsters and leg drops. Just in, new old stock detective left handed holster. 0ne only. Plus 3 shaped brown leather snub nose 38's. Just in ... new standard style for left hands.

categories:GunsSporting Goods

60904 impressions

2501 views

This is a NEW Right Hand holster for a GLOCK 21. Text please. Buyer pays postage.

categories:GunsSporting Goods

9411 impressions

329 views

G-code. SOC RTI holster and extra cowling for the X-300 light attachment Looking for $100 for each one. One Fits glock 17/19 the other fits glock 34/35. Shipping if needed will be $15 extra.

categories:GunsSporting Goods

14520 impressions

650 views

Glock adjustable shoulder holster with 9mm double mag holders. I take custom orders. Left hand, Initials, brands, fancy tooling. A phone call is best at 780-523-7722

categories:GunsSporting Goods

56052 impressions

3758 views

1911 Shoulder Holster with double mag holder. I can also do custom orders. Left hand, scoped and red dot, custom tooling with initials, brands, etc...

categories:GunsSporting Goods

55593 impressions

4073 views