This is from the estate of my late father in law, who was an avid gun collector. No this is not in pristine museum quality condition. He actually used most of the guns in his gun safe. Prices reflect condition. Offers may be considered, but low ballers will be ignored or told to F off. If you don't like the price keep scrolling. This rifle stock has been hand built. Serial # 630791 which means it was built in 1942. Comes with 56 rounds of ammunition. Clean bore. In very nice condition.

categories:GunsSporting Goods

12383 impressions

683 views

1) Husqvarna Rear Sight Ramp & Elevator - $145.00 2) Husqvarna Elevator - $45.00 3) Husqvarna Front Sight Hood - SOLD 5) 6-48 Filler Screws (4) - Blue $20.00 6) 6-48 Pan Head Filler Screws (4) - Blue $20.00 7) 6-48 Filler Screws (4) - Stainless $20.00 8) 8-40 Pan Head Filler Screws (2) $20.00 9) 3/8" DT Filler - Curved Top - $45.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

56935 impressions

2952 views

01.UTG Accushot 1-4X28 30mm Mill-dot Long Eye Relief Scope, 36-Color Circle Dot by AccuShot.With rings.-$160.00 02.Hakko Marksman 3-9X40,made in Japan, 1" tube-$130.00 Japan (used,good condition,some scrathes and marks) 03.Grizzly 3-9—32 -$50.00(used,good condition,only little rings marks) 04.Pursuit 6x24x44 with Side focus.Tactical Rifle Scope Adjustable Objective Mil-Dot Reticle Matte.-SOLD 05.NcSTAR Vism Sniper 1.1-4—24 Evolution Series Rifle Scope, Matte Black Finish with Illuminated P4 Sniper Reticle, 30mm Tube.-$200.00 brand new. 06.NcStar Shooter II 3-9x40mm Riflescope w/ Dual Illuminated P4 Sniper Reticle-Sold 07.Husqvarna Jaktoptik 4x32.Duplex type reticle.Rifle scope in matte black.-$80.00(made in Japan). 08.Weaver 3-10x40 Grand Slam Rifle Scope, Matte, Dual-X,Shows Some Wear From Use-$150.00 (Japan). 09.Cabela AR Rifle Scope 3X-12X44 with Side focus.223,Cabela's AR .223 Reticle,30mm Tube,4" - 3.7" Eye Relief,FOV36.7" - 9.2" @ 100 Yards,Matte Black,Red/green illumination with 5 intensity levels-SOLD 01.BSA Sweet 22-3-9X40 AO 3-9X40 Hunting Rifle Scope With Compensation,Duplex Reticle.-$120.00 02.NCStar 4×20 11mm mount-$30.00(used,excellent condition,some little marks) 03.Bushnell 4X Banner 22,11mm mount-$40.00 Japan(used,excellent condition,some marks) 04.BSA Red/Green dot,11mm mount-$50.00 Excellent. Local is preferred, but will ship at buyers expense. Further Lost insurance can be purchased by the buyer. Please send message to: medal1958@gmail.com

categories:GunsSporting Goods

51449 impressions

1865 views

Selling/trading a Husqvarna A.B. in 9.3x57. Overall it's in nice shape. 24" barrel, controlled round feed Mauser action. Bluing is in very nice shape with great colour throughout. Woo stock looks to have been refinished and shows well, one filler repair at the tang which is holding well. Bore is in very nice shape. Comes topped with its original iron sights. A very nice rifle overall. Looking for $375 shipped. Insurance by request on buyer. I've got dies that can be sold with it for extra as well. Open to all trades. Can send more pictures upon request. Pm or text/call 204 795 2850 for more info.

categories:GunsSporting Goods

6867 impressions

544 views

2) Ithaca High Standard Elevator - .850" W x 1.00" L - $30 3) Elevator X - .104" W x 0.89" L - OAL = 1.65" - $35 4) Cooey Elevator - .075" x 1.21" - $15 5) Husqvarna Elevator - $45 6) Marble Double Step - Rifle Elevator - $35 7) Marble Double Step - Carbine Elevator - $35 8) Marlin Elevator M1 - Marlin S-25 Sight - .046" W x 1.60" L - $35 9) Marlin Elevator M2 - Marlin S-25 Sight - .055" W x 1.60" L - $35 10) Marlin Elevator (336 - 1894 - 1895) - .115"W x 1.43"L - SOLD 11) Marlin Early Fishhook Elevator- .075" W x 1.22" L - $35 12) Marlin Elevator - Marlin S-27 Sight - .095" W x 1.15" L - SOLD 14) Remington 98 1/2 Sight - 105 Elevator - Round Barrel Model 12 Rifles - $45 15) Remington "R" Elevator (701 1/2) - .057" W x 1.11" L - SOLD 16) Savage Folding Sight Elevator - .061" W x 1.13" L - $40 17) Savage Fishhook Elevator - $40 18) Savage 1899 Elevator - .095" W x 1.05" L - OAL = 1.27" - SOLD 19) Savage 99 Elevator - .095" W x 1.15" Lo - $40 21) Savage 24 Elevator (Replacement Style) - $25 22) Win Early Elevator - $40 23) Winchester 1A Elevator - dated (.207") - $60 24) Winchester 1B Elevator - dated (.162") - $60 25) Winchester 1C Elevator - no date (.175") - $60 28) Win 2C Elevator - .60"W x 1.625"L - $35 29) Winchester 3C - 6S Elevator - $50 - 31) 6-48 Filler Screws (4) - Blue $20.00 32) 6-48 Pan Head Filler Screws (4) - Blue $20.00 33) 6-48 Filler Screws (4) - Stainless $20.00 34) 8-40 Pan Head Filler Screws (2) $20.00 35) DT-1 - 3/8" DT Filler - Blue - Curved Top - $45.00 36) DT-2 - 3/8" DT Filler - Stainless - Curved Top - $50.00 - 40) Husqvarna Front Sight Hood - $85 41) Marlin pre 72 Round Front Sight Hood - $45 42) Marlin post 72 Front Sight Hood - $60 43) Sako - Finnwolf Hood - $85 44) Browning (Japan) BLR - BAR Front Sight Hood - SOLD 45) Parker Hale Front Sight Hood - $85 46) Browning (Belgium) Safari Front Sight Hood - $85 47) Winchester Model 9422 Front Sight Hood - $40 48) Winchester post 64 Model 94 Front Sight Hood - $40 49) Winchester pre 64 Model 94 Front Sight Hood - $40 50) Winchester Model 70-88-100-64-65 Front Sight Hood - $40 51) Winchester post 64 Model 70 Front Sight Hood - $75 52) Winchester post 64 Model 70 Front Sight Hood (Long) - $85 53) Winchester (97 Sight - Model 69) Front Sight Hood - $75 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

175724 impressions

2613 views

Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.

categories:GunsSporting Goods

11686 impressions

522 views

Lyman 48 HVA Receiver Sight w/ screws Husqvarna and Mauser Rifles $375.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:GunsSporting Goods

33338 impressions

726 views

Husqvarna Vapenpabriks A.B Svenskt Nickedstal 1310 12 gauge 1310 Spec 12 gauge x 70mm or 2 3/4” chambers, full choke right and extra full choke left, side by side. Swivels front and back, double trigger fires right to left. Barrels are 27 1/2 inches. It has a solid concave matted rib and a single front bead. The rib has a cross bolt extension. Stocks are in very good condition Very good condition. Made in Sweden. CFP/RCMP courtesy of Bill C-71 require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Sections 99 & 101 of the Criminal code.

categories:GunsSporting Goods

28596 impressions

1368 views

Husqvarna m1896 Mauser Sporter 9.3 x 5.7mm 5+1 Internal hinge plate mag. Some ammo is available for an additional cost. BLADE FRONT SIGHT WITH RAMP. U NOTCH REAR SIGHT. RECEIVER IS DRILLED AND TAPPED FOR SCOPE BASES. ONE PIECE WOOD STOCK. CHECKERED PISTOL GRIP. BLACK VENTED RUBBER RECOIL PAD. SLING SWIVELS. CFP/RCMP courtesy of Bill C-71 require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Sections 99 & 101 of the Criminal code.

categories:GunsSporting Goods

28313 impressions

1278 views

Swedish Mauser action with Husqvarna barrel in 30.06, Sporter stock in good condition with butt pad cushion, swivel mounts, semi pistol grip with base cap. Knurling is in good condition. Adjustable rear sight for elevation. Overall good condition. Receiver is tapped for scope mount bases. All Swedish Mausers other than trials rifles were chambered for the 6.5×55mm Swedish cartridge, and all Swedish-made actions were proof-tested with a single 6.5×55mm proof round developing approximately 455 MPa (65,992 psi) piezo pressure (55,000 CUP).[4][5] Swedish Mausers were manufactured by Waffenfabrik Mauser AG in Oberndorf a/N in Germany and in Sweden by Carl Gustafs Stads Gevärsfaktori and Husqvarna Vapenfabriks Aktiebolag. All Swedish Mausers, whether built in Germany or Sweden, were fabricated using a Swedish-supplied high grade tool steel alloyed with nickel, copper, and vanadium, a product then noted for its strength and corrosion resistance. These rifles, like other pre-M 98 system Mauser rifles, lack the third safety locking lug at the rear of the bolt and feature "cock-on-closing" (similar to the contemporary Lee–Enfield rifle). CFP/RCMP courtesy of Bill C-71 require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Sections 99 & 101 of the Criminal code.

categories:GunsSporting Goods

35641 impressions

2110 views

Husqvarna m1896 Mauser Sporter 9.3 x 5.7mm 5+1 Internal hinge plate mag. Some ammo is available. 23 5/8" barrel length. BLADE FRONT SIGHT WITH RAMP. U NOTCH REAR SIGHT. RECEIVER IS DRILLED AND TAPPED WITH WEAVER TYPE BASES. ONE PIECE WOOD STOCK. CHECKERED PISTOL GRIP. BLACK VENTED RUBBER RECOIL PAD. SLING SWIVELS. CFP/RCMP courtesy of Bill C-71 require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Sections 99 & 101 of the Criminal code.

categories:GunsSporting Goods

26667 impressions

1151 views

Action Serial number is 1424 and the gun is chambered for 40 - 90 Sharps. 20 once-fired brass are included with the sale. The gun was Restored / Customized in February, March, 2017 and features: ·         African BUBINGA wood stock with Mun ebony fore-end ·         Glass bedded at all pressure points ·         Action re-finished and re-polished (left in the white) ·         New Green Mountain Barrel is trimmed to 28 inches and has been re-crowned ·         Lyman hooded front sight with 7 inserts installed ·         Pedersoli – Creedmoor rear tang sight installed ·         Metal, checkered butt plate and barrel finished with Arma-coat

categories:GunsSporting Goods

21567 impressions

513 views

Husqvarna 243 with rare mannlicher stock cw scope and sling looks like new. Ammo available. Delivery between vanderhoof and Kamloops. Pal required. PHONE calls only . 250-395-4890. Don

categories:GunsSporting Goods

4880 impressions

269 views

Selling/trading a Husqvarna 98 Mauser in 30-06. Overall it's in excellent shape. 24" barrel, controlled round feed, Swedish crest on the receiver. Bluing is in very nice shape throughout with only light imperfections to note here or there. Sitting in a Ramline stock which is also very nice, has very few blemishes. Bore is very nice, bright and crisp. Has a Timney trigger. Front sight is present, rear sight has a filler slot in it. Overall a very nice rifle. Looking for $550 shipped. Insurance by request on buyer. Open to all trades. Can send more pictures upon request. Pm or text/call 204 795 2850 for more info.

categories:GunsSporting Goods

2093 impressions

177 views

Type : Rifle Action : Bolt Barrel length : 21 INCH Stock is cracked 475 $ The delivery service made by Canada Post is available for purchase for 50 $ . The delivery address must absolutely be the same as on the firearm license. A signature and an identity document will be requested at the reception at the post office. Before shipment, this information will be requested: - Name - Address - PAL Number - Date of birth - Telephone number - Email Address - two photos from a government identity card or a conference video that will prove the buyer's identity (RCMP regulations since 2022) The PAL will be checked and an RCMP reference number will be requested

categories:GunsSporting Goods

932 impressions

162 views

Selling/trading a few barrelled actions. These came in with a bulk deal, I do not know the history on them. as follows from top to bottom: 1. Swedish Nitro proofed action, Husqvarna 30-06 barrel. Bluing is in nice shape, shows normal marks and some sort of braze mark on the underside of the barrel. Bore is excellent. Bolt doesn't seem to move forward or back. 3 holes filled on the side of the receiver. Front sight still present and rear base. Bolt is not complete, missing firing pin, safety and cocking mechanism. 2. 1902 Carl Gustaf action, numbers matching barrel assumed to be 6.5x55. Bluing is in nice shape throughout. Front sight present and rear sight base, elevator/ladder is not. Bolt is stuck in place and looks to have a chip out of the rear section. Has a weld on the underside of the action. 3. Swedish Nitro proofed action, Husqvarna 30-06 barrel. Bluing is in nice shape, shows normal marks. Bore is in very nice shape. No bolt. Front sight still present. These will be sold as is with no warranty or guarantees. Looking for $195 shipped each, or $525 shipped for the 3 of them. Insurance by request on buyer. Open to all trades. Can send more pictures upon request. Pm or text/call 204 795 2850 for more info.

categories:GunsSporting Goods

3909 impressions

406 views

Selling/trading a Husqvarna A.B. in 9.3x57. Overall it's in very nice shape. Bluing is in nice shape throughout with light wear here and there. Wood stock shows very well, a few normal marks here or there. Bore is in very nice shape. Comes topped with its original iron sights and bases for a quick detach scope mount. Looking for $375 shipped. Insurance by request on buyer. Open to all trades. Can send more pictures upon request. Pm or text/call 204 795 2850 for more info.

categories:GunsSporting Goods

3173 impressions

407 views

M98 9.3x62 Husqvarna mauser. Blueing in decent shape Custom walnut stock with bedded action. Cheaper 3-9x40 weaver scope but it does and did do the job! Leupold rings. Bore is in excellent shape. Very shiny. Timney trigger. 24" barrel Asking $900 OBO M96 6.5x55 Husqvarna mauser. Worn bluing Excellent bore. 24" barrel Asking $400 OBO Two side mounts with screws for the M96 but I never used them Preferred the irons. Asking $150 each. Both rifles work very well its just time to clear the safe out a bit.

categories:GunsSporting Goods

7610 impressions

929 views

Ad Title: Husqvarna, Model 1100, Cal. 9,3X57mm Mauser Make : Husqvarna Vapenfabriks Model: 1100 Serial Number: 1162 Type of action: Bolt Action Barrel length: 24 inches Caliber: 9,3 X 57mm Mauser Note: Mauser Action Condition: Very good condition. Blue on barrel is over 80%. The stock has several small scratches from handling. The barrel has nice and strong rifling. Price: 435.00 Cdn Ref: 24A071 Shipping: $30 (Stock separated from the action for shipping) Payment: By E Transfer

categories:GunsSporting Goods

17575 impressions

1226 views

Ad Title: Husqvarna, Model 1640, Cal. 8x57 Swedish Mauser Make : Husqvarna Vapenfabriks A.B. Model: 1640 Serial No: 53963 Type of action: Bolt Action Barrel length: 24 inches Caliber: 8X57 Swedish Mauser Note: With a Mauser Action Condition: Very good. The blue on metal is about 90%. The wood is very nice. The barrel is excellent with very strong rifling. Permit: PAL required Price: $395.00 Cdn Ref: 24A014 Shipping with Canada Post: $30 in Canada with Tracking No. provided. (Barrel and action separated from the stock for shipping) Basic Insurance: $100 included with all purchases Full insurance: Add 2% of the value of your purchase to get full coverage Payment: By E Transfer

categories:GunsSporting Goods

22763 impressions

1795 views

Great gun and tack driver. Just cleaning out some duplicates. Gun is complete and stick is A1 with no cracks or blemishes.

categories:GunsSporting Goods

3695 impressions

557 views