$4500
Antique Swedish Husqvarna Model 1887 Nagant 7.5mm Revolver, Shoots SMOKELESS .32 S&W Ammo!!!Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least.
These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same.
So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy.
The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range.
The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame.
I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered.
The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime.
I can do Alberta meetups too. It depends on the time of year though and whereabouts.
I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.
categories:GunsSporting Goods
25950 impressions
903 views
Calgary, AB5 days ago
