. Lee mold #451 R bal and #358-145 Wadcuter $30.00 + shipping, Mold RCBS like new use one time for test, Double, caliber 32, -84gr ,wadcuter and 38 - 140gr Wad Cutter, #38-158RN $95.00 each +shipping. Mould . #358195 wadcutter $95.00 +shipping , #358091 wadcutter $95,00 + shipping #358495 wadcutter single $50.00 + shipping . Lyman #454616 single Black powder MMAXI/CONICAL 360gr, $ 95.00+ shipping Saeco Mould #071- 7mm GC, 160gr, $140.00 with Handle + shipping, Add 80.00 for Sizer die and 30.00 for top punch #531. (Buy usa, 160.00+Handle 70.00+tx+shipping + custom fee + exchange money ) LEE Mold # C358-158 SWC, GC (Gaz check) Dia.358 Look like never used, $ 65.00 + shipping Small Mold cal 50 RB Brass, Made in Italy,(item collector)$50.00 + shipping JIGs 30.00 each + shipping

categories:Sporting GoodsGuns

18419 impressions

1317 views

1 mold round ball.451 no handle pick up in yorkton $40

categories:Sporting GoodsGuns

1913 impressions

167 views

These are the best out there, Lyman 4 cav. iron molds, #356637, 147gr. for the 9mm,#358665 158 gr. fp,358429 170 swc, #429421 .44 Keith swc,#429667 240gr. cowboy,#452460 200gr. swc, 452664 250gr. cowboy, #427666 200gr. 44/40 fp. This how to cast lots of great bullets, fast!! 4 cav. handles $50......all molds are $100.

categories:Sporting GoodsGuns

6273 impressions

435 views

As new 2 cav. RCBS iron bullet molds, .416-350-fn gc $150 Rare mold, .40-180 cm $100,.45-300 fn gc $100, .41-280-fn $100,.45-255-swc $100

categories:Sporting GoodsGuns

5008 impressions

328 views

Hogue stock off an rem 700 sps-acc .308 short action w/bull barrel Unmolested and still sticky

categories:Sporting GoodsGuns

9561 impressions

530 views

Prettying much any 33 WCF reloading items would be great Thanks for looking

categories:Sporting GoodsGuns

3517 impressions

407 views

 I just found a couple of boxes of old .350 caliber round balls that I used to shoot in my .36 cal. TC SENECA (which I haven't owned for the last 45 years) . One is an original box of 100 Hornady factory swaged balls and the other is a box of 125 cast pure lead round balls ( also .350 but with a sprue )......not sure which mold was used, as I sold it with the Seneca. I thought to list them for a couple of weeks, before I throw them into my melting pot and turn them int 50-70s  , in case someone wanted to buy ready cast balls. I am willing to ship at buyer’s expense or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery.  

categories:Sporting GoodsGuns

2327 impressions

76 views

Browning Maxus II Rifled Deer 12 Gauge 3 inch Mossy Oak Bottomlands Semi Automatic Shotgun,22in thick wall, fully rifled barrel for use with slugs. Cantilever, Weaver style scope mount for easy optics attachment. Composite stock with close radius pistol grip and over molded gripping surfaces. Shim-adjustable for length of pull, cast and drop. Mossy Oak Bottomland camouflage. Ideal for big game hunting. Mint,as new. Local is preferred, but will ship at buyers expense. Further Lost insurance can be purchased by the buyer. Valid Pal a Must and will be verified for reference number. Please send message to: medal1958@gmail.com

categories:Sporting GoodsGuns

2030 impressions

115 views

GAMO VARMINT FEATURES with NEW BSA AIR 3-9 X 40 AO SCOPE (Retail $100) Only used once 495 FPS AIR 3- 9x 40 AO SCOPE (see below) All weather molded synthetic stock with non-slip texturing on the pistol grip and forearm Monte Carlo cheek pad aligns your eye with the scope sight Rubber recoil pad keeps the butt stock firmly planted on the shoulder Trigger: Second stage adjustable / 3.74 lb trigger pull Cocking Effort: 30 lb Overall Length: 43” (109.22 cm) Barrel Length: 17.8” Weight: 7.15 lb (3.24 kg) Manual safety Automatic cocking safety system Brand New BSA AIR 3-9x, 40mm adjustable objective, replaced the original plastic OEM scope The new BSA OPTICS OUTLOOK series air rifle scopes were specifically designed to withstand the reverse recoil found in the most powerful air rifles. Feature rich, this series offers fully multi-coated lenses, fast focus, an adjustable objective, low profile zero-reset turrets, and a Mil-Dot reticle. This series comes standard with 2 piece dovetail rings. Matte black finish. Waterproof, Shockproof and Fogproof.

categories:Sporting GoodsGuns

3303 impressions

136 views

I am offering my rifle for sale. Upgraded with brand new optics and rings.  Franchi Momentum, upgraded to Momentum Elite and more.  Very good and accurate rifle, light, comfortable, reliable,  with all you need to start hunt or target shooting.  High end optics installed professional. BRAND NEW: TALLEY Ultralight Scope Mounts $60 + tax. Rifle: Franchi momentum in .308 caliber. like new, with superior optics. Brake in barrel done with 25 rounds, total shots.  Very accurate and smooth action.  Cold-hammer-forged chrome-molybdenum 22'' barrel is  free-floating with (muzzle brake NOW COST $125 + tax), bolt has a short 60-degree throw, adjustable single-stage trigger, TSA recoil pad, molded swivel attachment points, detachable straight-feed magazine,  7-Year Warranty. NOW COST $750 + tax. Optics: BRAND NEW: Vector Optics Paragon 3-15x50mm Second Focal Plane Gen 2 (SFP) 1/10 MIL Tactical Riflescope with Red Illuminated Reticle,  Lens Covers. Life time Warranty. NOW COST $460 + tax.  Including in this offer.  1. Rifle: Franchi Momentum  .308 black. $750 2. Ergonomic  shock resist sling. $65 3. Vector Optics Paragon 3-15x50mm Gen 2 (SFP)  4. Extra 3 round magazine polymer. $75 5. Franchi Momentum muzzle brake $125 6. Talley Scope mounts $60 7. Bonus: Eberlestock Gunrunner with Built in rifle scabbard back pack + 2 extra side pouches. Now cost about $400CAD Please text if you wish to possess this awesome rifle for your next hunting Trip.  Or best offer that you think it's may worthy. 6479095408

categories:Sporting GoodsGuns

5669 impressions

362 views

Looking for a Lee Loader in 375 H&H Mag. Don't think they've been sold for a couple of decades now. Original Lee part number was 90283 as seen in the photo back in the 1960's but that part number appears to be now repurposed to a 530 ball cavity mold. New, these sets go for about $60 but are only available in limited calibres. If this is still up I'm still on the hunt.

categories:Sporting GoodsGuns

3899 impressions

214 views

Howdy Townpost. I've a neat old single shot 12 gauge made by Savage. It has a nice and light tenite stock that was sanded at one point to give it a matte finish. The shotgun is very tight and not off the face at all. The gun is very light and handy sitting 5.73lbs. It has a 12 gauge 2 3/4in, 28in full choke barrel. The patent number is molded into the plastic stock interestingly enough. The black paint on the trigger guard is flaking of a little. The shotgun is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. It's pretty short when broken down, and is light so it should be relatively inexpensive to ship. If you live in Alberta I do get around the province a fair bit throughout the year, so if I happen to be heading to your area maybe we can do a meet up along the way on my travels to save you the shipping costs. PAL will be verified as per C-71.

categories:Sporting GoodsGuns

20291 impressions

1014 views

Classic DeSantis “Cozy Partner” inside-the-waistband (IWB) leather holster in tan — molded to fit full-size Glock footprints (commonly fits Glock 17 and Glock 22). Clean, comfortable option for drawing your firearm from the concealed carry setup. No trades. Will ship on buyers dime.

categories:Sporting GoodsGuns

7555 impressions

372 views

-Model 6088, sells for $449 on Amazon.ca -portable handle design . Beautiful and Functional Injection Molded. Durable use with the solide construction. -Customized Fit Foam -Inside:According to your size of valueds size, configure the interior foam to fit and keep from the shocks and bumps on the road. -50/50 lid-to-base ratio for easy loading and 4 portable Smooth Rolling Polyurethane Wheels:Portable Rolling Wheels provides smooth mobility.Ensure a quiet and effortless trip over a multitude of terrains and conditions. Easy To Open with Latches Design:Smarter and easier to open than traditional cases. Start the release and offers plenty of leverage to open with a light pull in just seconds. -High Performance -Waterproof:Keep your valuables dry with its high performance of watertight. Whether you're caught in rain or our at sea. -Outside Dimension: Length 44.88inches Width 25.31 inches Height 16.5inch.Inside Dimension:42"x22"x15.1".Cover Inner Depth:7.58inch.Bottom Inner Depth:7.3inch.Weight with foam:49.00 lbs

categories:Sporting GoodsGuns

2069 impressions

648 views

New, Inflatable Motor Boat, made in Ukraine, 450-Sport 14.8' Description: Built for performance and versatility, the Navigator BT-450S Inflatable Boat with Motor is designed to handle high-speed adventures, fishing expeditions, and group outings with ease. NAVIGATOR BT-450S motor boat with an inflatable keel and a rigid prefabricated flooring at the greatest length, due to the optimally adjusted proportions, has high controllability and manoeuvrability. Shows good speed with a motor up to 30hp. Movable seats facilitate optimal weight distribution and boat handling. A fender with a splash guard protects the sides from collision and excessive friction (against the berth support, reeds, etc.), and passengers and the cockpit from excessive splashing. Protective moldings on the bottom protect it from unnecessary friction when dragged ashore or transported on a trailer. The most spacious cockpit with a large capacity allows several fishermen to organize a mini-championship within the same inflatable boat. And everyone has enough room for action. The boat is very good for high-speed boat trips, even for 10 people. An awning can be installed on this boat. Canada transportation Certified Equipment: Boat, Bag for wooden book-type floor, 2 Sliding seats, Foot Pump (150 extra if electric), 2 Paddles, Repair kit, Operation manual, Small craft certificate Specifications: Brand, model Navigator BT-450S 14.8' PVC Korean PVC + 3 Year Warranty Length overall 14.8 ft / 4.5 m Width overall 5.9 ft / 1.8 m Transom type Stationary Overall weight (kg) 50+32 kg / 110.23+70.55 lbs Floor type Hard Deck Max. persons 8 Dealer: Alberta Inflatable Boats Location: Acheson by Edmonton Call for viewing: 780-245-4121

categories:Sporting GoodsBoats

7040 impressions

976 views

Looking for a great storage case? This is virtually brand new, very lightly used. Ideal protection & storage for guns, instrumentation, sales presentation packages, test equipment, photographic equipment and other delicate equipment Tough injection molded ABS outer shell will withstand a 7 foot drop to concrete Silicone rubber o-ring seal lasts for years without hardening or crazing to keep out water and corrosive gasses Dual function latches hold the lid tightly closed and equalize pressure when released for easy opening Padded fold-down handle makes for easy carrying Full length hinge, padlock loops and two front latches secure contents during transportation Optional water sealed inner flange provides support for mounting an electronics control panel Materials include UV protected ultra-high impact ABS shell, stainless steel hinge pins, silicone rubber o-ring INTERNAL DIMENSIONS: 17.8 x 12.8 x 6.8 in Available for pickup in Rocky Mountain House.

categories:Sporting Goods

5134 impressions

587 views

Please read entire ad! Prices below are not negotiable!  No trades or offers! Prices and quantities are as follows for parts: Bolt, Chinese Type 56, complete w/floating firing pin, extractor, etc - $150 Dust cover, Chinese unmarked - $40 (1 available) Long Recoil spring, complete - SOLD OUT Short spring - $15 (1 available) Short piston - $28 (1 available) Take down latch, Russian - $10 Magazine, internal 10rd pinned to 5, Chinese - $50 (2 available) Spike Bayonet, complete - $65 (3 available with spike, bolt, spring & handle – new condition). Ammo bandolero pouch, Chinese - $25 Cleaning rod, Russian - $25 Cleaning rod, Chinese/NcStar - $15 Front sight base w/bayonet lug (with sight pin & block, no mounting pins included for front sight) - $60 Tapco ODG Synthetic stock with 6 position stock (not ATI) black handguard, black molded plastic (gas tube not included) - $250 (picture to come) Gas port reamer (carbon) cleaner, gas chamber - $15 (3 available) Oil bottle, square green plastic - $3 Oil bottle, steel (round) - $6 (2 available) Oil bottle(steel), pouch - $4 Ammo pouch, Russian - $10 (2 available) 10rd stripper clips, Czech made - $3 ea (6 available) These are the only parts I have... I have no trigger groups, gas tubes, stocks, other springs, slings, barreled actions, recoil lug bolts, spring loaded bolts, rear sights or parts, muzzle brakes or bladed bayonets available. No parting out pieces of the magazines, bayonet units or receiver bolts...you purchase the whole unit. If it’s not listed above then it’s not available.  All of you know how hard it is to find SKS parts nowadays... this is it! Items and pictures will be removed once parts have been sold...items will not be “saved/on hold/held ” unless paid for in full, no exceptions! Items are sold on a first come basis w/ payment in full.  Please don’t ask about the certain serial numbers on the mags...they are either Chinese or Russian only. Shipping available – Items combined to ship / I ship within Canada only. Ship costs starts at $22 Payment by EMT (shipped) or cash (F2F pickup)

categories:Sporting GoodsGuns

43121 impressions

1517 views

The TMAG 30/5 AR/M4 GEN M3 is a highly reliable, translucent, 30-round magazine for STANAG-compatible weapons chambered in 5.56×45 NATO/.223 Remington. Molded from a durable translucent material with an olive drab hue, it provides shooters the ability to visibly verify various ammunition types and the current round count. Featuring ribbed front and rear straps for improved purchase during magazine changes, the sides are left smooth to enhance visibility. Like the rest of the GEN M3 family of magazines, the TMAG incorporates similar internal geometry which translates into unmatched reliability when firing. The four-way, anti-tilt follower is paired with a durable USGI-spec, stainless-steel spring with a painted coil, which maintains the “gas gauge” capability from the “Window” magazine product line. The magazine body is clearly marked to show approximate round counts when inserted in a magazine well, and the paint-pen dot matrix allows for custom markings to be applied by the shooter. The TMAG’s low-profile floor plate also allows for compatibility with the full line of PMAG® AR/M4 GEN M3 floor-plate accessories. The TMAG is optimized for Colt-spec AR15/M4 platforms, but modified internal and external geometry also permits operation with a range of other weapons such as the WK180C, HK® 416/MR556A1/M27 IAR, FN® SCAR™ MK 16/16S, and others. Made in the USA. Available for shipping only. Taxes will be added.

categories:Sporting GoodsGuns

22816 impressions

637 views

NANUK 910 Case with Foam (Graffite colour) * Interior: 336 mm x 234 mm x 104 mm * Exterior: 363 mm x 282 mm x 120 mm * Waterproof, Dustproof & Shockproof Case * Designed & Made in Canada * Lifetime warranty & 30-day satisfaction warranty (This is a used item. I used to keep my glock in it. I scratched my name on the back of the case but other than that it is in pristine condition) Built to organize, protect, carry and survive tough conditions, the NANUK 910 waterproof hard case is impenetrable and indestructible with a lightweight, tough NK-7 resin shell and its PowerClaw superior latching system. With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it. The NANUK 910 is built to take abuse so your gear doesn’t. Lightweight, rugged and compact, the NANUK 910 hard case adapts to every environment. It’s a favorite of photographers, videographers, outdoor enthusiasts, sportsmen, law enforcement officers, military, hunters and shooting sports enthusiasts to protect their most valuable gear. The slim profile of the NANUK 910 protective case makes it perfect for protecting small laptops, tablets, small cameras, electronics, handguns, small drones, sample kits, compact tools, and equipment of all sorts. The NANUK 910 protective case comes with a soft grip and ergonomic handle to make it easy to transport. It also features stainless steel hardware and integrated handle stay to keep the handle out of harm’s way when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight. This MIL-Spec injection molded case is backed by a lifetime warranty. 

categories:Sporting GoodsGuns

5958 impressions

459 views

ERGO Full rifle Cover Rail Covers set of 3. They clip directly onto Picatinny rails for full rail protection Molded in Santoprene Please email only.

categories:Sporting GoodsGuns

2773 impressions

492 views

Complete Glock Kit INDIVIDUAL ASKING PRICE: NANUK 910 HARD CASE (with foam interior) = $89.95 AX COMBINATION CABLE LOCK TSA (Short Cable) = $14.95 4 IN 1 TOOL FOR GLOCK = $29.95 STREAMLIGHT WEAPON LIGHT WITH LITHIUM BATTERIES = $199.95 BELLOCK KEYED TIRGGER LOCK = $9.95 TOTAL PRICE = $344.75 (LIKE NEW MOST STILL IN THE BOX) DISCOUNTED PRICE = $287.29 (LIKE NEW MOST STILL IN THE BOX) Individual Description:  NANUK 910 Case with Foam (Graffite colour) = $89.95 * Interior: 336 mm x 234 mm x 104 mm * Exterior: 363 mm x 282 mm x 120 mm * Waterproof, Dustproof & Shockproof Case * Designed & Made in Canada * Lifetime warranty & 30-day satisfaction warranty (This is a used item. I used to keep my glock in it. I scratched my name on the back of the case but other than that it is in pristine condition) Built to organize, protect, carry and survive tough conditions, the NANUK 910 waterproof hard case is impenetrable and indestructible with a lightweight, tough NK-7 resin shell and its PowerClaw superior latching system. With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it. The NANUK 910 is built to take abuse so your gear doesn’t. Lightweight, rugged and compact, the NANUK 910 hard case adapts to every environment. It’s a favorite of photographers, videographers, outdoor enthusiasts, sportsmen, law enforcement officers, military, hunters and shooting sports enthusiasts to protect their most valuable gear. The slim profile of the NANUK 910 protective case makes it perfect for protecting small laptops, tablets, small cameras, electronics, handguns, small drones, sample kits, compact tools, and equipment of all sorts. The NANUK 910 protective case comes with a soft grip and ergonomic handle to make it easy to transport. It also features stainless steel hardware and integrated handle stay to keep the handle out of harm’s way when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight. This MIL-Spec injection molded case is backed by a lifetime warranty.  4 IN 1 TOOL FOR GLOCK = $29.95 (Push Button Armorer's Multi-Tool) STILL IN THE PACKAGE. NEVER USED. Works On Every Glock. Fits in Your Pocket. Push button, snap-open tools lock in place Features 4 valuable tools: -Armorer's punch Front sight driver Flat blade drive

categories:Sporting GoodsGuns

10129 impressions

866 views