0.430" Lee Bullet Lubricating and Sizing Kits

This is the easiest and cheapest way to size and lube the bullets as there is no nose punch needed and no special separate press.  You can use your standard single stage press.  Note that Lee no longer includes the ALOX lube in their kits.  Mine have the ALOX lube included.  From the Lee Precision website I stole the following quote:

• Fastest and easiest way to size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container.

• Intended for use on single stage presses only. The push through punch is used in place of a shell holder in the ram.

• To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox (sold separately), push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on.

• For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter.

Ebay has these for $60 + $40 shipping.  

Amazon: w/o lube for $40 - $90  and lube is $25 extra. 

Located in Radisson Heights, Calgary 

Or ship by Canada Post Flat Rate boxes.  

Fill them up as much as possible up to 5kg.:

• 24.1 x 16.5 x 8.9cm.   $20

• 35 x 26 x 5cm.              $23

• 39 x 26 x 12cm.            $26

• 40 x 30 x 19cm.            $35

Will combine as much as possible to minimize shipping costs, including other classifieds I have posted.

Cheers, Cody