Sako 85M Bavarian 308 Win. Bolt action with detachable magazine.22″ barrel. Satin blue finished barrel and receiver. Single set trigger. Checkered walnut stock with factory recoil pad, Bavarian cheek piece, satin oil finish, rosewood grip caps, palm swell, double steel recoil lugs and sling swivel studs. Provides both functionality and traditional looks. Brand new, unfired. Local is preferred, but will ship at buyers expense. Valid Pal a Must. Please send message to: medal1958@gmail.com

categories:Sporting GoodsGuns

8135 impressions

276 views

Please text anytime 6476871484. Fully functional double action revolver in perfect like new condition. Tasted with modern smokeless powder ammo shown on the last picture. No PAL required. Ammo is available but sold separately. Comes with FRT paperwork. Nagant M1887 Swedish Service Revolver, 7.5mm Nagant or .32 S&W long/short It is in excellent like new condition. This is an early, pre-1893, Belgian-made Swedish model, before Nagant transferred production to Husqvarna. It is in excellent condition throughout, with the original blue intact. The nitre-blue colors on the loading gate spring, hammer and trigger are excellent. The action is crisp and strong, and the cylinder indexes and locks properly, without play. The bore of the 4 1/2 inch barrel is excellent and mirror bright, with sharp rifling and no signs of pitting or wear. The walnut grips are excellent and undamaged, and show only a little wear on the right side. Pre-1893 Belgian proofs, SN 1827, rated excellent overall.

categories:Sporting GoodsGuns

9096 impressions

552 views

Please text anytime 6476871484. Fully functional antique revolver in perfect and ready to shoot condition ,very good single and double action. Reloadable ammo is available but sold separately No PAL required. Comes with FRT RCMP paperwork. Tested fired with smokeless powder ammo. Smith & Wesson 44New Model No. 3 Top Break, .44 Russian Revolver. This one is in perfect condition with 100% of the finish intact. The serial numbers match . The action is strong and accurate, and the cylinder indexes and locks properly. The bore of the 5-inch barrel is quite good, with strong and sharp rifling. Mechanically in excellent condition with proper timing and lockup. The latch is also solid with zero play. Extractor works as it should. SN 17793, very good overall. History & Background Smith and Wesson's first double action design dates back to at least 1872 - years before Colt ever attempted a double action cartridge revolver. It was mentioned in a letter to the Russian envoy General Orlof, and although the sale to Russia never materialized, it served to pave the way for the very popular and successful line of double action top break revolvers. The .44 Russian model was actually the first to be produced as a prototype, and the last to be released for sale to the public. For this reason there exists a degree of confusion over the proper terminology: the first one to be manufactured for sale was the .38 caliber model, followed by the .32. The .44 caliber model was not released until 1881, and is variably known as the No. 3 Double Action, the Double Action "Navy" (a name Daniel Wesson wanted to keep alive to differentiate this model from the No. 3 single action, and still holding out hope to sell it to the Russian navy), and the First Model Double Action. Originally, the .44 Double Action was made with a 1 7/16 inch cylinder, however an optional .44-40 version was available as of 1886. This required a 1 9/16 inch cylinder, and a longer frame. The firm soon realized that it was too expensive and cumbersome to manufacture two different sizes of frames for what was essentially the same gun, and the shorter cylinder and frame were dropped in faivour of the longer one in the early 1890's. The No. 3 frame .44 double action top breaks were dropped from the Smith and Wesson catalogue in 1913.

categories:Sporting GoodsGuns

21043 impressions

1330 views

Please text anytime 6476871484. Fully functional double action revolver in perfect ready to shoot condition. No PAL required. Test fired with smokeless powder. Comes with FRT paperwork. Reloadable ammo is available but sold separately. Colt M1892 "New Army" Revolver has significant improvements over M1889 with better locking and indexing mechanism. This one is in excellent condition. The nitro blue on the trigger and hammer is well visible and retains 95% of original blued finish. The action is strong and accurate, and the cylinder indexes and locks properly very little play on trigger pull. The bore of the 4 1/2 inch barrel is good and bright with strong rifling. The markings are sharp and defined throughout. The assembly numbers on the cylinder, crane and frame. The original grips are good and undamaged.​​ S/N 71799 History & Background This model is an important milestone in Colt handgun development, as it is the first American revolver with a swing-out cylinder mounted on a crane, a development which would become the standard for modern revolvers to this day. The 1889 cylinder mechanism was already "on the books" as early as 1880, based on designs of Colt engineers William Mason, C.J Ehbets and Horace Lord. It would take almost ten years for Colt executives to give the green light to manufacture this gun, and once it was available, the US government quickly took notice and ordered several thousand for the Navy. Colt adopted the name "New Navy" in honor of this order. The gun has an interesting counter-clockwise cylinder rotation and a locking mechanism which relies entirely on the two-pronged hand. The 1889 model would remain in production for 18 years, with significant improvements in 1892, 94, 95, 96, 1901 and 1903. When it was first introduced in 1889, it met with no competition from the other major makers - Smith & Wesson were still heavily engaged in manufacturing top-break revolvers, and Remington only had their solid frame revolvers with removable cylinders to offer. It would take S&W another ten years before they had a viable alternative to Colt's design.

categories:Sporting GoodsGuns

27328 impressions

1800 views

Please text anytime 6476871484. Fully functional antique revolver in ready to shoot like new condition. Very smooth action. No PAL required. Comes with RCMP FRT paperwork. Reloadable ammo is available but sold separately. Tested with smokeless powder. This is conversion to British .455 Webley ammo. (available for sale online). but still can shoot original 11mm ammo. It is very interesting example of rarely blued 1873 French Service Revolver that was imported to United Kingdom and converted to .455 Webley caliber which was readily available in England of that time and was considerably more powerful than original 11mm ammo. This one is in excellent original condition, all the markings are sharp and complete. The serial numbers are repeated on all components: the barrel, cylinder, frame, grips, internal mechanism parts and even the screw heads and escutcheons. Everything matches. The bore of the 4 1/2 inch barrel is as perfect and it is mirror bright and the rifling is sharp. The action is excellent and accurate and very smooth, the cylinder indexes and locks properly with no play at all. The walnut grips are excellent and show no damage this one looks like new. SN H48478, this one is made in 1881, rated excellent overall. MAS Mle 1873 French Service Revolver, 11mm French Ordnance The Mle 1873 was France's first double action cartridge revolver. After the disastrous loss to Prussia in the war of 1870, the French military closely examined its armaments and small arms, and they came to the conclusion that a new, more rugged and powerful side arm for their infantry was required. The result was the Mle 1873, designed by the famous partners of Chamelot & Delvigne, whose genius ideas would dominate much of the European military (and commercial) small arms market for decades to come. Many European countries adopted their designs, including Switzerland, Italy, Sweden, Russia and Belgium. Only the Brits and Germans would continue to develop their own side arms.

categories:Sporting GoodsGuns

26121 impressions

2013 views

Please text anytime 6476871484. Fully functional double action revolver in ready to shoot perfect like new condition. No PAL required. Ammo is available but sold separately. (original ammo also can be bought in stores) Comes with FRT paperwork. Tested with smokeless powder and modern ammo. Swiss M1882 Service Revolver, 7.5mm Swiss Ordnance This is a very well made revolver, based on the Chamelot & Devigne and Nagant designs, modified by Swiss firearms designer Rudolf Schmidt. The gun utilized George Abatis' unique safety which disconnects the hammer from the trigger when the loading gate is open. This allows the shooter to advance the cylinder using the trigger to quickly load or unload the chambers. The gun is in excellent condition, with 99% of the blue intact. The straw colors on the hammer and trigger are still well visible. The action is crisp and accurate, and the cylinder indexes and locks properly with zero play. The bore of the 4 1/2inch barrel is good with sharp rifling. The barrel was replaced by arsenal with newer one dated 1902 but it doesn't affect antique status of the gun. Matching serial numbers and assembly numbers. The gun is chambered for the 7.5mm Swiss Ordnance cartridge, but shooters in Switzerland frequently use the .32 S&W Long cartridge instead. Excellent overall. History & Background Swiss M1882 military revolvers are fairly scarce on the Canadian antique market. Although the arsenal at Bern produced over 37,000 pieces between 1883 and 1937, only those with a serial number below 7508 are considered antique in Canada. The M1882 was produced by both the SIG Neuhausen and the Bern factories for military use and private sale. Specimens with a serial number below approximately 20,000 were fitted with plastic grips bearing the Swiss cross. Later models would be fitted with plain wooden grips. The M1882 saw a slight re-design in the 1920’s and was re-named the model 82/29. The M1882 was in service from 1883 until the 1970’s and was carried by military, police, border patrol and home guard forces. These Swiss revolvers are usually in extremely fine condition when sold on the antique market. This can be attributed to the following two facts: firstly, Switzerland has not been involved in a war since 1847, its last armed conflict, a short-lived civil war. The second reason for the fine condition is the Swiss government’s policy to allow soldiers leaving the service to keep their side arms. Given this opportunity, most soldiers were careful to maintain and protect their guns more diligently than if it had been just an issued piece to be returned to the arsenal. The Swiss Ordonanzrevolver of 1882 is chambered for the 7.5 Swiss Ordnance cartridge, but in Switzerland the .32 S&W Long is commonly used, as it is more readily available. ​

categories:Sporting GoodsGuns

15030 impressions

1264 views

Please text anytime 6476871484. Fully functional double action revolver in perfect restored like new condition. No PAL required. Ammo is available but sold separately. This one can soot 3 factory loaded modern types of ammo including original 8mm, 7.5mm Nagant and 32S&W Tested with smokeless powder. Comes with FRT paperwork. French Model 1892 Service Revolver in 8mm lebel caliber, 4.5" barrel, 6 shot. Very well built and robust . Fiocchi manufacturers modern 8mm ammo as well. The action functions excellent in single and double action. Timing and lockup are good. Bore and cylinder walls are very good . Exterior is professionally nickeled . Grips are replaced with new weather resistant ones , lanyard ring is undamaged. Made in 1897. S/N 2167 The Model 1892 revolver (also known as the "Lebel revolver" and the "St. Etienne 8mm") is a French service revolver produced by Manufacture d'armes de Saint-Étienne as a replacement for the MAS 1873 revolver. It was the standard issue sidearm for officers in the French military during the First World War. The Modèle 1892 revolver is a solid frame revolver with the cylinder on a separate frame swinging right for manual reloading. The Modèle 1892 was first fielded in 1893 and was prominent among French military officers during First World War, and later the French police until the mid-1960s.

categories:Sporting GoodsGuns

26446 impressions

1686 views

Sako 85M Bavarian 300 Win.Mag. Bolt action with Stainless steel detachable magazine.24.5″ barrel with Muzzle Brake. Satin blue finished barrel and receiver. Single set trigger. Checkered walnut stock with factory recoil pad, Bavarian cheek piece, satin oil finish, rosewood grip caps, palm swell, double steel recoil lugs and sling swivel studs. Provides both functionality and traditional looks. Some handling/hunting marks. Gun excellent plus condition. Local is preferred, but will ship at buyers expense. Valid Pal a Must.Please send messages to: medal1958@gmail.com

categories:Sporting GoodsGuns

15551 impressions

807 views

Please text anytime 6476871484. Brand new. Made in USA high quality adapter. about 4 inches long. 12GA to 410GA Shotgun Adapter This will allow 12GA shotgun to shoot .410ga ammo. Designed for break-open style guns Precision machined made in USA This adapter gives your 12 Gauge single or double shot break open shotgun the ability to fire a .410ga ammunition. This adapter is precision machined to the OD specifications of a 2 3/4 12GA shell plus and extra one and a half inch in front to make this adapter 4 inches long in total. It will easily fit into your break open shotgun barrel and accept any 410ga ammunition. After firing simply remove the adapter and tip upside down to remove the spent shell. This is a smooth bore adapter. The cartridge side is precision CNC machined to the exact chamber dimensions (SAAMI chamber specifications). Adapter orientation is not important and the adapter will work in any position. Will fit any break open shotgun with 2 3/4" or 3" chambers Perfect for 'Preppers' or your Bug Out Bags. Carry one gun and have the ability to shoot not only 12GA shells but also 410ga ammunition. Surprisingly accurate!

categories:Sporting GoodsGuns

12367 impressions

1269 views

Sako 85M Bavarian 30-06.Bolt action with detachable magazine.22″ barrel. Satin blue finished barrel and receiver. Single set trigger. Checkered walnut stock with factory recoil pad, Bavarian cheek piece, satin oil finish, rosewood grip caps, palm swell, double steel recoil lugs and sling swivel studs. Provides both functionality and traditional looks. Excellent plus,like new condition. Local is preferred, but will ship at buyers expense.Further Lost insurance can be purchased by the buyer. Valid Pal a Must. Please send message to: medal1958@gmail.com

categories:Sporting GoodsGuns

26866 impressions

1709 views

$700 Shipped. 30" Full Choke (TRAP) and rare rib that apparently has a great barrel. Wood Stock that is solid with no cracks but could not be re-finished well so sprayed with black paint. Shot a round of trap today, Light loads does not eject rounds but does with regular shot loads. Action spring could be cut down if wanted for doubles in trap. Not chambered for magnums. Located near UofW, can take more photos on request. Lenght of pull is 14" (thin butt pad) pwc@rogers.com

categories:Sporting GoodsGuns

9730 impressions

1087 views

Please text anytime 6476871484. Brand new adapters for 12gauge guns. $110 each. Here is the list of adapters currently in stock. 410GA to 22LR smooth bore Adapter 12GA to 357 Magnum & 38 Special - RIFLED Shotgun Adapter 12GA to 44 MAGNUM RIFLED Shotgun Adapter 12GA to 9MM RIFLED Shotgun Adapter 12GA to 45ACP RIFLED Shotgun Adapter 12GA to 22LR rifled or smooth bore Adapter 12GA to 22WMR Magnum rifled/smooth bore Adapter 12GA to 410GA Adapter 12GA to 40S&W rifled 12GA to 45LC rifled 12GA to 10mm rifled 12GA to .380ACP rifled Designed for break-open style guns Precision machined from stainless steel made in USA This is a 3 inch long adapter This adapters give your 12 Gauge single or double shot break open shotgun the ability to fire subcaliber ammunition. They will easily fit into your break open shotgun barrel. The cartridge side is precision CNC machined to the exact chamber dimensions (SAAMI chamber specifications). Adapter orientation is not important and the adapter will work in any position. Will fit any break open shotgun with 2 3/4" or 3" chambers Carry one gun and have the ability to shoot not only 12GA shells but also 357 Magnum or 38 Special ammunition. Surprisingly accurate!

categories:Sporting GoodsGuns

79920 impressions

6734 views

Please text anytime 6476871484. Brand new 12GA to 9MM RIFLED Shotgun Adapter - Chamber Reducer - Stainless 12GA to 9MM Luger - RIFLED Shotgun Adapter Designed for break-open style shotguns Precision machined from stainless steel This is a 3 inch long RIFLED adapter This adapter gives your 12 Gauge single or double shot break open shotgun the ability to fire a 9MM bullet (standard 9mm Luger - 9x19). This adapter is precision machined from high quality stainless steel to the OD specifications of a 2 3/4 12GA shell plus and extra half inch in front to make this adapter three inches long in total. It will easily fit into your break open shotgun barrel and accept any 9mm Luger ammunition. After firing simply remove the adapter and tip upside down to remove the spent 9mm shell. This adapter has a rifled bore to increase accuracy, this in NOT a smooth bore adapter, again this adapter has a rifled bore. The 9mm bullet side is precision CNC machined to the exact chamber dimensions to accept 9mm ammunition (SAAMI chamber specifications). Adapter orientation is not important and the adapter will work in any position. Made in the USA on American machines Will fit any break open shotgun with 2 3/4" or 3" chambers Perfect for 'Preppers' or your Bug Out Bags. Carry one gun and have the ability to shoot not only 12GA shells but also 9mm ammunition. Surprisingly accurate!

categories:Sporting GoodsGuns

44842 impressions

3883 views

Please text anytime 6476871484. Brand new. 12GA to 45LC - RIFLED Shotgun Adapter Designed for break-open style guns Precision machined from stainless steel made in USA This is a 3 inch long RIFLED adapter This adapter gives your 12 Gauge single or double shot break open shotgun the ability to fire a 45LC ammunition. This adapter is precision machined from high quality stainless steel to the OD specifications of a 2 3/4 12GA shell plus and extra half inch in front to make this adapter three inches long in total. It will easily fit into your break open shotgun barrel and accept any 45LC ammunition. After firing simply remove the adapter and tip upside down to remove the spent shell. This adapter has a rifled bore to increase accuracy, this in NOT a smooth bore adapter, again this adapter has a rifled bore. The cartridge side is precision CNC machined to the exact chamber dimensions to accept 45LC ammunition (SAAMI chamber specifications). Adapter orientation is not important and the adapter will work in any position. Will fit any break open shotgun with 2 3/4" or 3" chambers Perfect for 'Preppers' or your Bug Out Bags. Carry one gun and have the ability to shoot not only 12GA shells but also 45LC ammunition. Surprisingly accurate! DO NOT use in pump action or semi-auto shotguns. Designed for use with break-open style guns only. The risk is that the cartridge could fall out of the adapter causing a dangerous situation. Also, it could damage the adapter upon ejection.

categories:Sporting GoodsGuns

18746 impressions

1333 views

Please text anytime 6476871484. Brand new 12GA to 22 MAGNUM Shotgun Adapter Designed for break-open shotguns Precision machined from stainless steel made in the USA This adapter has a SMOOTH BORE This adapter gives your 12 Gauge single or double shot break open shotgun the ability to fire a 22Magnum bullet. This adapter is precision machined from high quality stainless steel to the OD specifications of a 2 3/4 12GA shell. It will easily fit into your break open shotgun barrel and accept any 22 Magnum ammunition. After firing simply remove the adapter and tip upside down to remove the spent 22 shell, or use your finger nail to grab and remove the shell while the adapter stays in your gun. The wide groove cut in the face will not only allow you to easily remove a spent shell but also provides a recessed clearance area for your firing pin. Adapters that don't have this recessed area (or recessed area in the wrong spot) do not provide the proper clearance for your firing pin and may damage your shotgun. A smooth bore is gently reamed through the adapter for the bullet (no rifling). Adapter orientation is not important and the adapter will work in any position. Will fit any break open shotgun with 2 3/4" or 3" chambers Carry one gun and have the ability to shoot not only 12GA shells but also 22 Magnum bullets Surprisingly accurate! Not recommended for pump action or semi-auto shotguns. Designed for use with break open style shotguns. This chamber / caliber reducer will NOT work with 22LR/22 long/22 short ammunition.

categories:Sporting GoodsGuns

30819 impressions

2478 views

Winchester Model 21 Heavy Duck 12 Gauge 3 Inch Magnum. 30 inch double bore with bright shiny tubes. Modified and full fixed chokes. Single selective trigger, auto ejectors. Gun appears to be all original finish and blue with all matching serial #298XX's. The gun has original solid rib, metal bead front and middle sights, 3" Magnum chamber, pistol grip, beavertail forearm, high figure wood, auto safety, ejectors, single trigger with barrel selector. Recoil pad a bit dry. There are some handling marks on the stock and forearm. The checkering is really nice. The guns condition is just excellent for its age.Pal is a must. No trades. Thanks. Call or email only,as I don't use townpost messager. Please call me or text,before you send EMT!!!! Please send message,payment to: medal1958@gmail.com

categories:Sporting GoodsGuns

32908 impressions

3001 views

Please text anytime 6476871484. Brand new. 12GA to 357 Magnum & 38 Special - RIFLED Shotgun Adapter Designed for break-open style guns Precision machined from stainless steel made in USA This is a 3 inch long RIFLED adapter This adapter gives your 12 Gauge single or double shot break open shotgun the ability to fire a 40S&W ammunition. This adapter is precision machined from high quality stainless steel to the OD specifications of a 2 3/4 12GA shell plus and extra half inch in front to make this adapter three inches long in total. It will easily fit into your break open shotgun barrel and accept any 357 Magnum or 38 Special ammunition. After firing simply remove the adapter and tip upside down to remove the spent shell. This adapter has a rifled bore to increase accuracy, this in NOT a smooth bore adapter, again this adapter has a rifled bore. The cartridge side is precision CNC machined to the exact chamber dimensions (SAAMI chamber specifications). Adapter orientation is not important and the adapter will work in any position. Will fit any break open shotgun with 2 3/4" or 3" chambers Perfect for 'Preppers' or your Bug Out Bags. Carry one gun and have the ability to shoot not only 12GA shells but also 40S&W ammunition. Surprisingly accurate! DO NOT use in pump action or semi-auto shotguns. Designed for use with break-open style guns only. The risk is that the cartridge could fall out of the adapter causing a dangerous situation. Also, it could damage the adapter upon ejection.

categories:Sporting GoodsGuns

22507 impressions

1473 views

Please text anytime 6476871484. Brand new $100-110 12GA to 22 LR or 22 Short Adapter - SMOOTH BORE OR RIFLED!!! Precision machined from stainless steel Made in USA. This adapter has a SMOOTH Bore (rifled) This adapter gives your 12 Gauge single or double shot break open shotgun the ability to fire a 22lr bullet. This adapter is precision machined from high quality stainless steel to the OD specifications of a 2 3/4 12GA shell. It will easily fit into your break open shotgun barrel and accept any 22LR or 22 Short ammunition. After firing simply remove the adapter and tip upside down to remove the spent 22 shell, or use your finger nail to grab and remove the shell while the adapter stays in your gun. The wide groove cut in the face will not only allow you to easily remove a spent shell but also provides a recessed clearance area for your firing pin. Adapters that don't have this recessed area (or recessed area in the wrong spot) do not provide the proper clearance for your firing pin and may damage your shotgun. A SMOOTH bore is reamed through the adapter for the bullet. Adapter orientation is not important and the adapter will work in any position. Will fit any break open gun with 2 3/4" or 3" chambers. Perfect for 'Preppers' or your Bug Out Bags. Carry one gun and have the ability to shoot not only 12GA shells but also 22LR / 22 Short bullets. Surprisingly accurate! Not recommended for pump action or semi-auto shotguns. Designed for use with break open shotguns. This chamber / caliber reducer will not work with 22 magnum ammunition. Any ammunition pictured is for representation purposes and is not included with this purchase.

categories:Sporting GoodsGuns

40992 impressions

3205 views

Please text anytime 6476871484. Brand new. 12GA to 357 Magnum & 38 Special - RIFLED Shotgun Adapter Designed for break-open style guns Precision machined from stainless steel made in USA This is a 3 inch long RIFLED adapter This adapter gives your 12 Gauge single or double shot break open shotgun the ability to fire a 357 Magnum or 38 Special ammunition. This adapter is precision machined from high quality stainless steel to the OD specifications of a 2 3/4 12GA shell plus and extra half inch in front to make this adapter three inches long in total. It will easily fit into your break open shotgun barrel and accept any 357 Magnum or 38 Special ammunition. After firing simply remove the adapter and tip upside down to remove the spent shell. This adapter has a rifled bore to increase accuracy, this in NOT a smooth bore adapter, again this adapter has a rifled bore. The cartridge side is precision CNC machined to the exact chamber dimensions to accept 357 Magnum or 38 Special ammunition (SAAMI chamber specifications). Adapter orientation is not important and the adapter will work in any position. Will fit any break open shotgun with 2 3/4" or 3" chambers Perfect for 'Preppers' or your Bug Out Bags. Carry one gun and have the ability to shoot not only 12GA shells but also 357 Magnum or 38 Special ammunition. Surprisingly accurate! DO NOT use in pump action or semi-auto shotguns. Designed for use with break-open style guns only. The risk is that the cartridge could fall out of the adapter causing a dangerous situation. Also, it could damage the adapter upon ejection.

categories:Sporting GoodsGuns

31001 impressions

2477 views

Please text anytime 6476871484. Brand new 12GA to 45ACP - RIFLED Shotgun Adapter Designed for break-open style shotguns Precision machined from stainless steel This is a 3 inch long RIFLED adapter This adapter gives your 12 Gauge single or double shot break open shotgun the ability to fire a 45ACP bullet (standard 45 Auto). This adapter is precision machined from high quality stainless steel to the OD specifications of a 2 3/4 12GA shell plus and extra half inch in front to make this adapter three inches long in total. It will easily fit into your break open shotgun barrel and accept any 45ACP ammunition. After firing simply remove the adapter and tip upside down to remove the spent 45 ACP shell. This adapter has a rifled bore to increase accuracy, this in NOT a smooth bore adapter, again this adapter has a rifled bore. The 45ACP bullet side is precision CNC machined to the exact chamber dimensions to accept 45ACP ammunition (SAAMI chamber specifications). Adapter orientation is not important and the adapter will work in any position. Made in the USA on American machines Will fit any break open gun with 2 3/4" or 3" chambers Perfect for 'Preppers' or your Bug Out Bags. Carry one gun and have the ability to shoot not only 12GA shells but also 45ACP ammunition. Surprisingly accurate! DO NOT use in pump action or semi-auto shotguns. Designed for use with break-open style shotguns only. The risk is that the bullet could fall out of the adapter causing a dangerous result. Also, it could damage the adapter upon ejection.

categories:Sporting GoodsGuns

24940 impressions

1899 views

Please text anytime 6476871484. Brand new 12GA to 410GA - Adapter Precision machined from stainless steel made in the USA This adapter gives your 12 Gauge single or double shot break open shotgun the ability to fire 410GA ammunition. This adapter is precision machined from high quality stainless steel to the OD specifications of a 2 3/4 12GA shell. It will easily fit into your break open shotgun barrel and will accept any 410GA ammunition up to 3" (three inches). After firing simply remove the adapter and tip upside down to remove the spent shell. A smooth bore is gently bored through the adapter. The 410GA cartridge side is precision CNC machined to the exact chamber dimensions to accept 410GA ammunition (SAAMI chamber specifications). Every adapter is laser engraved for easy caliber conversion identification. Adapter orientation is not important and the adapter will work in any position. Will fit any 12GA break open gun with 2 3/4" or 3" chambers Perfect for 'Preppers' or your Bug Out Bags. Carry one gun and have the ability to shoot not only 12GA shells but also 410GA ammunition. Surprisingly accurate! Not recommended for pump action or semi-auto shotguns. Designed for use with break open style guns only. Any ammunition pictured is for representation purposes only and is not included with this purchase.

categories:Sporting GoodsGuns

23663 impressions

1769 views