Thompson Center Arms .50 caliber Thunder Hawk In-line rifle has a tapered round 1" to 7/8" x 21" stainless steel barrel with light handling marks to the finish. The bore is shiny and the rifling overall is good and sharp. It has a 1:38 twist and a mounted weaver rail. Bullet loads up to 150grn There are factory mount holes to install a ring-type set up. The Rynite stock has a checkered wrist and forend. The stock has a rubber recoil reducing pad and sling swivel studs. The firing mechanism is set up for the #11 percussion cap or 209 primer and has an outside manual bolt position safety. Length of pull is 14", the overall length is 39", weight is 5.4 lbs. CFP/RCMP courtesy of Bill C-71 and JT will require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Private sales do not require any information about the firearm. Private sales do not require any information about the firearm. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Sections 99 & 101 of the Criminal code. Valid PAL required. Will ship on your dime. ANY ATTEMPT TO INQUIRE IF A PURCHASE CAN BE MADE WITHOUT A VALID AND CONFIRMED PAL WILL RESULT IN AN AUTOMATIC POLICE AND CFP CENTER REPORT. DON'T WASTE MY TIME WHICH MAY GET YOU TIME!

categories:GunsSporting Goods

101596 impressions

8853 views

Made in Finland M22000 Valmet Jyvaskyla Standard . 22LR Competition single shot bolt action. 27.5" heavy competition barrel. Adjustable butt plate and set trigger. Friction T channel sling slot. Profiled competition heavy stock for right handed use. Bushnell 3-9 x 20 scope with dovetail rails on receiver. Drilled and tapped for rear sight with front sight mount. VKT (Valmet), or the State Rifle Factory became operational September 9, 1928. Since 1930 Valmet's factory rifle club was active as well, having their hand in the design of the Finnish Lion, together with Aimo Lahti, the chief designer. 2. The Finnish Lion has the longest manufacturing time of all Finnish guns, from 1930 to 1979. Models are: M30 (prototype), M31 mod I, mod IIa, IIb, IVb, IVc, M35, M45, M52, M55, M59, M62, M65, M70, M200002 (Finnish Lion Standard) and wild boar version. Heavier models were the Finnish Lion Match and Champion. Two lighter version were also made, Junior and Pikku Leijona (Little Lion). 3. Serial numbers start from #1 (1932), and end into # 14,358 (1979). 4. The bolt and trigger are said to have been ahead of their time. The lock time is fast. Also the barrels were accurate. Champion models should have a set trigger, which makes lock time longer, but reduces pull weight. 5. Some of Vlamet's success in competition: WORLD RECORDS: -Lucerne 1939, 40 shots prone -400 points, Toivo Mänttäri -Buenos Aires 1949, 3x40 team contest 5770, finnish team, 40 shots standing, 380 points, Pauli Janhonen WORLD CHAMPINSHIPS -Buenos Aires 1949, 3x40 shots, 1165 points, P. Janhonen -Stockholm 1947, 40 shots standing, 377, H. Erben 6. The Helsinki Olympics in 1952 was the prime time of the Lion. A quarter of all shooters shot the Lion, prone gold was won by a Romanian - a Mr. Sirbu, score 400. CFP/RCMP courtesy of Bill C-71 require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Sections 99 & 101 of the Criminal code.

categories:GunsSporting Goods

28411 impressions

1131 views

Howa 1500 .223 Rem Heavy Barrel Blackhawk Talon stock Internal 5*1 with adjustable grip inserts. manual, picatinny rail. Very low round count. Excellent condition. Howa 1500 barreled action Tool-less Firing Pin Removal Machined Receiver and Forged Bolt Large Internal Bolt handle and pressure vent holes One of the safest actions on the market Reliable M-16 Style Extractor/Ejector Stringent and Exacting Headspace specs Bolt Faces are True and Square to Chamber Two Stage Match Trigger 3 Position Safety SUB MOA – 3 Shot Group @ 100 yds with premium factory ammo The Synthetic BlackHawk Talon Rifle Stock comes with a durable, rubber recoil pad and sling swivel studs already mounted. The Talon Thumbhole Stock is the engineered fusion of the patented Knoxx recoil-reducing technology, ergonomic control of a pistol grip and time-tested elements of a traditional thumbhole stock. Reliable and built to last, this stock will help improve accuracy, target re-acquisition times and firearm control. Strategically placed texture and grooves on the pistol type grip and for-end ensures a positive grip when handling your rifle. The stock has aluminium pillars for increased stability when tightening down your actions screws giving you a solid point and preventing compression of the fiberglass reinforced polymer skeleton. The BlackHawk Talon stock has a dual recoil-compensation system to reduce the harsh recoil of bigger calibers. The stock is also completely ambidextrous benefiting both right and left handed shooters. Guaranteed to look great, feel great, and shoot straight! The tactical looking yet attractive durable finish on the stock together with the rubber recoil pad make for a comfortable shooting experience. The Howa Blackhawk Talon rifle stock represents excellent value and combines Howa’s famous prowess in manufacturing with a sleek high quality finish to compliment any rifle that will outlast the adventures that lie ahead. CFP/RCMP courtesy of Bill C-71 require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Sections 99 & 101 of the Criminal code

categories:GunsSporting Goods

41022 impressions

1479 views

Swedish Mauser action with Husqvarna barrel in 30.06, Sporter stock in good condition with butt pad cushion, swivel mounts, semi pistol grip with base cap. Knurling is in good condition. Adjustable rear sight for elevation. Overall good condition. Receiver is tapped for scope mount bases. All Swedish Mausers other than trials rifles were chambered for the 6.5×55mm Swedish cartridge, and all Swedish-made actions were proof-tested with a single 6.5×55mm proof round developing approximately 455 MPa (65,992 psi) piezo pressure (55,000 CUP).[4][5] Swedish Mausers were manufactured by Waffenfabrik Mauser AG in Oberndorf a/N in Germany and in Sweden by Carl Gustafs Stads Gevärsfaktori and Husqvarna Vapenfabriks Aktiebolag. All Swedish Mausers, whether built in Germany or Sweden, were fabricated using a Swedish-supplied high grade tool steel alloyed with nickel, copper, and vanadium, a product then noted for its strength and corrosion resistance. These rifles, like other pre-M 98 system Mauser rifles, lack the third safety locking lug at the rear of the bolt and feature "cock-on-closing" (similar to the contemporary Lee–Enfield rifle). CFP/RCMP courtesy of Bill C-71 require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Sections 99 & 101 of the Criminal code.

categories:GunsSporting Goods

35616 impressions

2107 views

• Savage factory blueprinted action • MDT ACC aluminum chassis with fully adjustable stock • ARCA Rail along the entire length of the chassis • Stainless steel, flash nitride target receiver • Titanium Nitride bolt body • 1.5 4 lb user adjustable AccuTrigger • MDT Vertical Grip and AICS magazine From Savage website. The 110 Elite Precision is the pinnacle of the Savage’s 110 designs. We’ve begun with the time tested Model 110 action and then rethought every aspect of the rifle. The overhaul includes all of the upgrades demanding shooters make to their long range tack drivers. The 110 Elite Precision has an Adjustable Core Competition chassis from Modular Driven Technologies (MDT). From its full length ARCA rail to its titanium nitride coatings, this is a rifle built for a lifetime of Elite Precision. Note: muzzle brake not included with long-action calibres (.300 Win Mag., 300 PRC, 338 Lap.). Included Extras; Forend mounted bipod. (Cost was $400) 3 mags (cost was $125 each) Muzzle brake (cost was $400) CFP/RCMP courtesy of Bill C-71 require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Sections 99 & 101 of the Criminal code.

categories:GunsSporting Goods

23171 impressions

1372 views

Non-Restricted rifle Remington model P17, .30-06 bolt action, w/ bbl length 24" [Blued barrel and receiver. Fixed front, no rear sight. Fitted with Universal 4X32 scope. Sporterized wooden Monte Carlo stock with aluminum butt plate. Fitted with sling mounts. Marked NOT ENGLISH MAKE, logo with crown and BM on left side of receiver. Other markings include .30/06 NITRO PROOF etc. on barrel, BM logo on bolt but no serial number seen. Parts gun as receiver has a crack by the nitro proof marks. Bluing worn in use and handling areas. Two drilled and tapped holes on right side of receiver with corresponding notch removed on stock, presumably from once attached rear peep sight. Handling and storage marks on wood and metal. CFP/RCMP courtesy of Bill C-71 require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Sections 99 & 101 of the Criminal code

categories:GunsSporting Goods

33992 impressions

2441 views

TIKKA M70 Combination 12 Gauge & .222 Rem O/U 25" barrels SHOTGUN BORE IS VERY GOOD & SHINY. REMOVABLE FULL CHOKE. RIFLE BORE IS VERY GOOD & SHINY WITH SHARP RIFLING. BLADE FRONT SIGHT, ADJUSTABLE FOLDING U NOTCHED REAR SIGHT, POLISH BLUED FINISH, VENT RIB BARREL, INTEGRAL SCOPE RAIL ABOVE CHAMBER, GROOVED WIDE SPUR HAMMER, EXTRACTOR, BARREL SELECTOR ON LEFT SIDE OF RECEIVER. TWO PIECE WOOD STOCKS, CHECKERED FOREARM AND PISTOL GRIP, GROOVED BLACK POLYMER BUTT PLATE, CHEEK REST, GRIP CAP, SLING SWIVELS. VERY NICE CONDITION. CFP/RCMP courtesy of Bill C-71 require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Sections 99 & 101 of the Criminal code.

categories:GunsSporting Goods

38056 impressions

1267 views

BSA Model P17 30-06 23" barrel internal 5+1 Hinge Plate Mag. Monte Carlo right handed stock, Adjustable rear sight with protected front hooded blade sight. Front and rear swivel mounts. Receiver is drilled and tapped for scope base mounts Made in England. Blueing is solid and the stock is in very good condition. Bore is shinny with good rifling. Canadian Non-restricted The M1917 Enfield, the "American Enfield", formally named "United States Rifle, cal .30, Model of 1917" is an American modification and production of the .303-inch (7.7 mm) Pattern 1914 Enfield (P14) rifle (listed in British Service as Rifle No. 3), which was developed and manufactured during the period 1917–1918. Numerically, it was the main rifle used by the American Expeditionary Forces in Europe during World War I.Thisbmodel was known as the P17 and chambered in 30-06 Springfield . The Danish Sirius Dog Sled Patrol in Greenland still use the M1917, which performs reliably in Arctic conditions, as their service weapon. CFP/RCMP courtesy of Bill C-71 require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Sections 99 & 101 of the Criminal code.

categories:GunsSporting Goods

33845 impressions

1593 views

Carcano Mannlicher 6.5×52mm Mod 91 Bolt Action with two 6 round Italian enbloc clips for each rifle. Condition as pictured which is average for the era. The rifle on top is older with. On adjustable iron sights. Bluing is mostly worn off and the stock has some wear and tear. Comes with 2 clips. 220$ The rifle on the bottom of the picture is in ok condition. The rear slide sight is adjustable to 1000m. Comes with 2 clips. 260$ No trades. CFP/RCMP courtesy of Bill C-71 require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Private sales do not require any information about the firearm. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Section 99 & 101 of the Criminal code. ANY ATTEMPT TO INQUIRE IF A PURCHASE CAN BE MADE WITHOUT A VALID AND CONFIRMED PAL WILL RESULT IN AN AUTOMATIC POLICE AND CFP CENTER REPORT. DON'T WASTE MY TIME WHICH MAY GET YOU TIME!

categories:GunsSporting Goods

30862 impressions

1078 views

Lee Enfield No: 1 Mark III 1938 GR1 Singapore SMTLE . 303 BRITISH 10 round Mag, full wood, swivels, bayonet lug with pig sticker bayonet included, rear brass butt plate with tool kit compartment, 2000m rear adjustable iron sight. Frame and butt stock medallion match. Mag number unreadable. Length: SMLE No. 1 Mk III: 44.57 in (1,132 mm) Barrel length: SMLE No. 1 Mk III: 25.2 in (640 mm) In late 1915 the Mk III* was introduced incorporating several changes, the most prominent of which were the deletion of the magazine cut-off mechanism, which when engaged permits the feeding and extraction of single cartridges only while keeping the cartridges in the magazine in reserve, and the long-range volley sights. The windage adjustment of the rear sight was also dispensed with, and the cocking piece was changed from a round knob to a serrated slab. Rifles with some or all of these features present are found, as the changes were implemented at different times in different factories and as stocks of parts were depleted. The magazine cut-off was reinstated after the First World War ended, and not entirely dispensed with in manufacturing until 1933. The SMLE Mk III* (renamed Rifle No.1 Mk III* in 1926) saw extensive service throughout the Second World War, especially in the North African, Italian, Pacific and Burmese theatres in the hands of British and Commonwealth forces. Australia and India retained and manufactured the SMLE Mk III* as their standard rifle during the conflict, and the rifle remained in Australian military service through the Korean War, until it was replaced by the L1A1 SLR in the late 1950s.The Lithgow Small Arms Factory finally ceased production of the SMLE Mk III* in 1953.

categories:GunsSporting Goods

31903 impressions

1292 views

NAACO Grizzly Manufactured in Canada, Model 30 Target single shot .22lr bolt action. 22" barrel,Lyman target sights aperture sights and Walnut stock. Thia rifle is in excellent shape. A rare piece of Canadain Firearms history. $600.00

categories:GunsSporting Goods

2281 impressions

133 views

Savage 11FCXP3 .243 bolt action rifle with clip and Bushnell scope. New Never fired.

categories:GunsSporting Goods

2089 impressions

210 views

Looking for something reliable, accurate, and beautiful? Or maybe a rare piece to add to your collection? Well, here it is! Very good condition, 7mm Rem Mag TIKKA M695. This rifle is the predecessor to the Tikka T3. They’re quite rare, and those who own or use them know just how beautiful and well-built they are. It features an exceptionally smooth bolt action, a longer action opening than the T3, and an overall robust design. It has been sighted in and has taken a few animals. There are some minor marks from field use, but for its age it has notbeen shot very much. The bore is clean and shiny, and this rifle is easily capable of serving several more generations of hunters. It’s accurate, reliable, and never lets you down. Includes a two-piece base. PAL will need to be verified. Local transaction preferred. Price is firm. Thank you.

categories:GunsSporting Goods

1758 impressions

166 views

$175 takes all 3. Take a good look at the pictures. I fired the bottom one , but not the other two. Yorkton area but possibly meet up elsewhere. Just ask.

categories:GunsSporting Goods

7357 impressions

459 views

New in box, Kel-tec RFB 18.5" in .308, never fired. Pictures of actual rifle available upon request.

categories:GunsSporting Goods

6598 impressions

749 views

Brno Model 2  22 LR ('76) 25″ BarreL with Excellent bore, with open sights. Comes with new Scorpion 3x9 scope, three magazine's.Checkered walnut stock with some minor handling marks. Detachable Sling swivels and sling. This rifle is in Very good plus condition.  $900.00

categories:GunsSporting Goods

1540 impressions

207 views

I am thinking about selling my Howa Mini chambered in 6arc to buy a bow. It's in excellent shape and I have around 60 rounds through it. I upgraded the stock to a Bell&Carlson and I replaced the plastic floorplate with a metal one from Jefferson Outdoors. I will sell it with or without the scope, the scope is a Burris Signature HD 2-10x40 with a exposed elevation turret for dialing ranges. It also comes with an extra magazine and if the scope is not purchased with the rifle it'll come with a set of medium height rings. I also kept all the brass and have one almost full box of bullets left. I have just over $2000 into the rifle and I am looking for $1500 with the scope or $1100 without. It is located in Lloydminster and the buyer must have a valid PAL.

categories:GunsSporting Goods

1663 impressions

138 views

Hand made leather slings, can custom stamp lettering on them, might be able to work out a deal for multiple slings. Can also make rifle scabbards, knife sheaths, belts, sunglasses cases, and much more. Will ship anywhere in Canada. Call or text Cole at 1 (306) 549-7503

categories:GunsSporting Goods

10967 impressions

850 views

Original Browning Model 81 lever action rifle box. Do you have the rifle but not the original box? Shipping at buyers expense.

categories:GunsSporting Goods

8004 impressions

407 views

i have for sale a vortex venom ar-bdc3 1-6x24 rifle scope. asking $450 for best response please text 306-304-0580

categories:GunsSporting Goods

1899 impressions

129 views

Savage Axis 25/06 REM Caliber Bolt action rifle Synthetic stock Have a box of Winchester rounds I can throw in

categories:GunsSporting Goods

2458 impressions

231 views