Brand new 5-20x50mm 30mm Tube Second Focal Plane Trijicon produces battle-proven aiming systems that deliver rapid target acquisition and increased hit potential under any lighting conditions. Their self-luminous aiming systems empower you to execute any shot with complete confidence in bright light, low light or no light at all. With a stunning magnification range, a 30mm tube, and an impressive objective, the AccuPoint 5-20x50 looks mighty serious while delivering the power needed to get on target across long distances. This fine optic is also graced with a very handy third turret that re-focuses the reticle to eliminate parallax error. Sighting during twilight conditions is enhanced considerably by the remarkable 50mm objective, while the dual tritium/fiber optic reticle illumination system provides a vibrant aiming point under any conditions. A mounting base and rings are used to attach a riflescope to a firearm. A comfortable sight picture is contingent upon the height of the rings. A comfortable cheek-weld is the result of properly positioning the scope over the receiver. Mounting the scope close to the receiver is preferable, yet scopes with larger objectives need higher rings so the front bell can clear the barrel. It should be noted that in many mounting applications, a professional gunsmith's skills will be needed for proper installation. 30mm Main-Tube 6061-T6 Aluminum main-tube is waterproof to 10' Mil-Spec Finish Type III hard anodized per MIL-A-8625 , Class 2 dull & non reflective Multi-Layer Coated Lenses Provide superior clarity, zero distortion, flare/glare reduction Side-Focus Parallax Correction Third turret on saddle actuates parallax correction for long-range accuracy Fiber Optics and Tritium Illumination Proprietary battery-free technology provides a vivid aiming point without the need for failure-prone batteries Dual-Illuminated Standard Crosshair w/Green Dot Reticle A series of dots upon the cross hairs gives the shooter the ability to judge bullet drop and the proper hold over for accurate long range shot placement. Trijicon's proprietary tritium/fiber-optic illumination technology places a brilliant green dot at the intersection of the stadia. This scope has the reticle positioned in the rear or second focal plane so it will not magnify when the scope is zoomed to high power. This leaves the sight picture unobstructed for a clear view at all times. Reticle: Standard Crosshair w/Green Dot Main-Tube Diameter: 30mm Linear Field of View: 5x: 19.1' @ 100 yd / 6.3 m @ 100 m 20x: 5.1' @ 100 yd / 1.7 m @ 100 mExit Pupil Diameter5x: 10mm 20x: 2.5mmEye Relief5x: 3.8" / 96.5mm 20x: 4.1" / 104 mm Impact Point Correction: 1/4 MOA Maximum Windage/Elevation Adjustment Windage: 34 MOA Elevation: 34 MOA Weatherproofing: Waterproof to 10.0' Length: 13.6"/345mm w/o sunshade Weight: 29.4 oz / 0.83 kg w/ sunshade Coming with: Weatherproof Logo Sticker 3.0" Sunshade Pair of Lens Caps Limited Lifetime Warranty (15 Year Warranty on Tritium)

categories:Sporting GoodsGuns

6643 impressions

439 views

Non-Restricted rifle Remington model P17, .30-06 bolt action, w/ bbl length 24" [Blued barrel and receiver. Fixed front, no rear sight. Fitted with Universal 4X32 scope. Sporterized wooden Monte Carlo stock with aluminum butt plate. Fitted with sling mounts. Marked NOT ENGLISH MAKE, logo with crown and BM on left side of receiver. Other markings include .30/06 NITRO PROOF etc. on barrel, BM logo on bolt but no serial number seen. Parts gun as receiver has a crack by the nitro proof marks. Bluing worn in use and handling areas. Two drilled and tapped holes on right side of receiver with corresponding notch removed on stock, presumably from once attached rear peep sight. Handling and storage marks on wood and metal. CFP/RCMP courtesy of Bill C-71 require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Sections 99 & 101 of the Criminal code

categories:Sporting GoodsGuns

36099 impressions

2566 views

Steel gas block, non-adjustable, .750" gas journal $20 * Luth Steel ar15 adjustable gas block .750" gas journal $50 Mid length gas tube $20 Rifle length gas tube $5 (silver) Rifle length gas tube $8 (melonite/black) Anderson Charging Handle $20 H carbine weight buffer $30 H2 carbine weight buffer $40 H3 carbine weight buffer $50 LBE 223/556 Bolt, firing pin, cam pin kit $125 Hammer/trigger pins $5 (for a set of 2) Magazine catch and spring $5 Bolt catch (includes spring, roll pin and detent) $5 Buffer detent $1 (no I do not have detent springs) Takdown/pivot pin spring $2 Trigger guard $2 Faxon 18.6" barrel w/ adj gas block and gas tube (installed but not used) $300 Crush washer for 1/2" diameter threaded muzzle devices $2 1/4x28 3/4" length bolt $2 Anti-walk pin kit $20 15" mlock handguard $120 Vism mid length triangular aluminum handguard $40 _____________________________ With the exception of the barrel, all parts will be shipped in a canada post pre paid box for $19. Unless noted, all parts are new. Pick up available in SE Edmonton; minimum value for pick up order is $20 *can be installed sideways to block the gas port for renegade builds

categories:Sporting GoodsGuns

5728 impressions

239 views

Charles Daly 601 12 Gauge Black Synthetic Semi-automatic Field Shotgun 930.204 Condition : new Tax rates shipping into your province NB, PEI, NS, NL, all pay 15% Ont, pays 13% Everybody else pays 5% GST only contact john at Doctor Deals 506-855-5377 e-transfer only Shipping through Canada Post, 18+ Signature Warranty available Feature & Specification SKU: 930.204 UPC: 8053800941099 Type of Gun: Shotgun Caliber: 12GA-3″ Action: Semi-Auto Barrel Length: 28″ (711 mm) Chokes: Beretta/Benelli® Mobil Choke Thread MC-3 (IC,M,F) Capacity: 4+1 Feed In: Magazine Tube Bolt: Gas Operated Trigger System: Single Stock: Checkered Synthetic LOP: 14.125″ DAH: 2.5″ DAC: 1.25″ Forend: Checkered Synthetic Front Sight: Brass Bead Safety: Manual Weight: 7.2 lbs Length: 48.5″ (216 mm) Material: Aluminum, Steel Barrel Finish: Black Anodized w/ Blued Barrel Extraction: Auto Ejection

categories:Sporting GoodsGuns

11976 impressions

773 views

2006 Kawasaki Brute force 750i Camo - New iTP Mud Lite XR 2 Tires less than 50km on them - Brand New Battery - Aluminum Rims - Low Low Kms under 2400kms - Synthetic Winch line - 2 up seat with storage - 7' Aluminum light weight ATV ramp - Spare Jerry Can - Gun Boot still in original box w bracket kit - Never been in the muck - Spare Gallon fuel can - Oil Filter & Spare Belt - Always stored indoors - Lots of power, would like someone to enjoy it

categories:Auto and TrailersQuads

4802 impressions

566 views

Selling like new Mesa Tactical Aluminum SureShell Carrier w/ Rail - Benelli M4, 6-Shell Mesa Tactical SureShell Aluminum Shotshell Carriers with Rail combine a shell carrier with a MIL-STD-1913 (NATO STANAG 4694) Picatinny rail that accepts optical, sights, lasers or accessories. These shotshell carrier/rail systems mount via a “saddle” style method (Remington shotguns) or by using the drilled and tapped holes on top of the shotgun’s receiver. SureShell Aluminum Shotshell Carriers with Rail are machined from 6061-T6 aluminum and use Mesa Tactical’s innovative rubber friction retention system to firmly and reliable hold shells in place until needed. Four, six and eight shell configurations and multiple rail lengths available. The Integrated Rail SureShell shotshell carrier design for the Benelli M2 Tactical, Benelli M4/M1014, Benelli SuperNova and Mossberg 500/590 platforms is radically different from the side mount designs. Instead of a stamped backing plate, the shell carrier yoke is attached to a machined bracket with an integral Picatinny (MIL-STD 1913) sight rail. The design allows the ShotShell assembly to be installed on the top of the shotgun by taking advantage of the factory tapped Picatinny (MIL-STD 1913) rail holes. With the Benelli shotguns, the shell carrier assembly is mounted directly onto the shotgun receiver. With the Mossberg platforms, a steel mounting cleat is first installed and the shell carrier is fastened to the cleat. Forend Compatibility: Factory shotgun forends, except “tactical” forends, often feature significant receiver overlap when the bolt is pulled back. These forends will need to be cut down or replaced with aftermarket “tactical” forends to be used with some SureShell shotshell carriers. Before you install a SureShell shotshell carrier, measure your forend’s receiver overlap and compare it to the furthest forward point of the shotshell carrier. Then cut any potential overlap or interference off the end of the forend with a miter saw or a rotary arm saw for a perfect fit.

categories:Sporting GoodsGuns

12221 impressions

654 views