338 Caliber SWIFT 250 Grain semi spitzer A Frame - 65.00 Bx 338 Caliber Nosler/Winchester Ballistic Silvertip 200 grain - 50.00 Bx 338 Caliber Barnes Tipped TTSX 225 Grain Boattail - 50.00 Bx 338 Barnes triple shock X  225 Grain flat base - 50.00 Bx  338 Hornady 250 Grain Spire Point - 40.00 Bx  Text is the best , shipping available 20.00 , 11 lb Maximum in Canada Post Bulk Box

categories:Sporting GoodsGuns

1073 impressions

41 views

Lee Enfield No.4 Mk1 .303 British 10 round Mag Bolt Action Rear Adjustable 1300yds Peep Ladder Sight with a fixed distance folded down aperture battle sight calibrated for 300yd/274m. The No.4 Mk1 has a heavier barrel than the previous version No.1 MkIII. VERY GOOD CONDITION. Marks and Numbers: Matching numbers on bolt and frame. 18.5 TONS Proof, 22.25 Inch Barrel, 2.222" F19, Made in England, BNP with Crowns (BNP is the Birmingham Nitro Proof, means it was tested for the civilian market when it was sold from service, .303 calibre, 2.222 cartridge/chamber length). Left Side Receiver engraving: No.4 Mk1 F 2/49 PF8.259 = REBUILT 1949 February BY FAZAKERLEY. Solid blueing, Monte Carlo CHECKERED FOREARM AND PISTOL GRIP W/ CAP & CHEEK REST. BROWN VENTED RUBBER RECOIL PAD. SLING SWIVELS. Very good bore. CFP/RCMP courtesy of Bill C-71 require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Sections 99 & 101 of the Criminal code.

categories:Sporting GoodsGuns

56228 impressions

2719 views

Please text anytime 6476871484. Fully functional antique revolver in ready to shoot condition ,very good action, no PAL needed. Reloadable ammo is available but sold separately Comes with FRT RCMP paperwork. Smith & Wesson 44 Double Action "First Model", .44 Russian, SCARCE 4-Inch Barrel making it suitable for self defense and concealed carry. This one is in very good condition. With the original finish remains, the markings are sharp and crisp. The action is strong and crisp, and the cylinder indexes and locks properly. The bore of the 4-inch barrel is very good with sharp rifling all the way trough. Matching numbers on the barrel, latch, cylinder and frame. The black plastic grips are very good and undamaged. SN 17122.​ History & Background Smith and Wesson's first double action design dates back to at least 1872 - years before Colt ever attempted a double action cartridge revolver. It was mentioned in a letter to the Russian envoy General Orlof, and although the sale to Russia never materialized, it served to pave the way for the very popular and successful line of double action top break revolvers. The .44 Russian model was actually the first to be produced as a prototype, and the last to be released for sale to the public. For this reason there exists a degree of confusion over the proper terminology: the first one to be manufactured for sale was the .38 caliber model, followed by the .32. The .44 caliber model was not released until 1881, and is variably known as the No. 3 Double Action, the Double Action "Navy" (a name Daniel Wesson wanted to keep alive to differentiate this model from the No. 3 single action, and still holding out hope to sell it to the Russian navy), and the First Model Double Action. Originally, the .44 Double Action was made with a 1 7/16 inch cylinder, however an optional .44-40 version was available as of 1886. This required a 1 9/16 inch cylinder, and a longer frame. The firm soon realized that it was too expensive and cumbersome to manufacture two different sizes of frames for what was essentially the same gun, and the shorter cylinder and frame were dropped in favor of the longer one in the early 1890's. The No. 3 frame .44 double action top breaks were dropped from the Smith and Wesson catalogue in 1913.

categories:Sporting GoodsGuns

8304 impressions

830 views

Hi wondering if anyone has a partial box kicking around in their loading room? Looking for either 100 or 120 grains.

categories:Sporting GoodsGuns

666 impressions

51 views

PLEASE READ CAREFULLY: You must obtain a letter of exemption from the CFO of your province in order to buy a handgun in Canada as of October 21, 2022. This will be the most precise and accurate pistol, with the best trigger you will ever own!! - Smith & Wesson 'MASTER' Model 52-2 (38 special wadcutter) Target/Competition pistol - Beautifully engineered and crafted For COLLECTION and TARGET SHOOTING - All parts are carefully hand-fitted to extremely high tolerances at the S&W Performance Center, USA - Date and place of Manufacturing of this pistol: Oct.19,1991, Springfield, Mass. USA - Extremely RARE /Never seen BRAND NEW 'PRISTINE' in original box, (NEVER FIRED!!) - 5 inch /127mm barrel with integrally milled lock-up bushing as part of the muzzle for SUPER ACCURACY - Semi-auto, Single action trigger, manufactured with an IMPROVED EXTRACTOR compared to the original (model 52) - Truly Excellent, fully adjustable rear sights - Hammer-block safety /slide-mounted (when engaged, the hammer-block safety rotates the firing pin so that it is not in line with the hammer when dry-firing. - Astonishingly-short, crisp, light TRIGGER PULL and reset! - Solid wood, aggressively checkered panel-style S&W grips - Highly POLISHED feed ramp. - Beautifully blued high-gloss finish on slide and frame. - Cleaning and takedown tools,...still in SEALED plastic bag. - Two (5 round) S&W 38 special wadcutter steel magazines - Owner's manual. - Weight 40 oz / 1134 g unloaded Note: Serial number has been blacked out in all photos.

categories:Guns

26959 impressions

3022 views

PLEASE READ CAREFULLY: You must obtain a letter of exemption from the CFO of your province in order to buy a handgun in Canada as of October 21, 2022. - CZ 75 SP-01 SHADOW 'ORANGE' 9mm caliber - NEW in black polymer carry case - 4.5 inch /114.3 mm long match grade burnished barrel - `ORANGE` meaning: On this pistol; all parts are HAND-FITTED to extemely tight tolerances by a master-gunsmith at the CZ Custom factory at the time of production for outstanding accuracy compared to the standard CZ 75 SP-01 - 3x 10 round steel magazines - THIS PISTOL IS IN IT`S ORIGINAL FORMAT and has not been altered in any way! - Full steel frame and slide... - Spare parts; recoil springs and shock-buffers in pictures (are all included) from the factory - Oil bottle (with oil), cleaning brush and patch puller (included) - Instruction manual (paper) and instructional DVD (included) - Extended Ambidextrous Safety - Extended magazine release - Extended beavertail - Checkered front and back straps and trigger guard - Super smooth polished trigger in single and double action - Skeletonized hammer - Accessory rail under the barrel shroud - Novak-style fixed rear sights and red fiber optic front sights - Integrally flared magwell - Front and rear slide serrations - Stainless steel guide rod and spring with shock buffer - 'Orange' aluminum, agressively-checkered CZ grip panels - Weight 40.7 oz / 1153 g unloaded Note* Serial number has been blacked out in all photos

categories:Guns

32039 impressions

3432 views

PLEASE READ CAREFULLY: You must obtain a letter of exemption from the CFO of your province in order to buy a handgun in Canada as of October 21, 2022. - SMITH & WESSON Model 2206 /22 lr caliber has a solid stainless steel frame, ss slide and barrel - MINT CONDITION /like new in original box / A TRULY SUPERB TARGET PISTOL! - 6 inch /152mm long barrel with Target-Crowned Muzzle - The barrel is milled into the bottom of the pistol's frame, giving it an EXTREMELY low bore axis, thus, creating virtually no muzzle-rise with each shot fired - Very light, short and crisp trigger pull with adjustable over-travel set-screw behind the trigger - Barrel and front sight do not move when the slide reciprocates, making it very accurate with fast follow-up shots - Fully adjustable rear sight for windage and elevation with LONG sight radius, for better accuracy - 4 (10 rnd) steel, extremely reliable S&W magazines - Takedown tool, Rear sight adjustment S&W screwdriver - Spare extractor, springs and retainer pin (included) from the factory - Instruction Manual - Weight 39 oz /1106 g unloaded UPGRADES: 1- Trigger Job by Gunsmith to lighten the trigger pull 2- Professionally dehorned edges by Gunsmith (all sharp edges have been slightly rounded) 3- Modified 1/8 inch grip inserts (installed) to improve the overall grip and feel 4- Stainless steel allen head GRIP screws (lengthened & installed) 5- Grip tape (installed) Note: Serial Number has been blacked out in all photos

categories:Guns

34643 impressions

3500 views

Selling my KRG Bravo 10/22 Chassis in beautiful stealth grey. Had my Ruger 10/22 in it for a short time and lightly used it. All accessories complete with box. Asking 500.00 obo. Introducing the 10/22 Bravo Chassis. Designed to fit your favorite Ruger 10/22 for that dream build you’ve always wanted. Featuring the same great ergos as the standard Bravo but with a slightly shorter minimal LOP (~11") for shooters of all sizes. For those of you over thinkers out there, don’t worry, the cheek piece position is still the same as our standard Bravo. The 10/22 Bravo ships standard with a .75" spacer, so for anything over a 11.25-12" LOP you will need to add the 10/22 LOP Extension Kit. The Bravo is one of the most comfortable stocks available but that's just the beginning.The full length stiff aluminum backbone will not allow the forend to flex on you but does allow design modularity with loads of accessories like our popular Spigot Mount and ARCA Rail system. The ergonomic adjustments on the 10/22 Bravo Chassis are just what you need to fit your frame so you can pull off the difficult shots. Comes standard with tool-less cheek height and a spacer LOP system.

categories:Sporting GoodsGuns

525 impressions

42 views

The Browning Buck Mark URX Pellet Pistol air gun from Umarex Airguns utilizes a single stroke break barrel cocking mechanism that’s easy to operate even for smaller framed shooters..177 Caliber Pellet, Break Barrel Action, Spring Powered,320 FPS. Brand new. Local is preferred, but will ship at buyers expense. Further Lost insurance can be purchased by the buyer. Must be 16+. Please send message to: medal1958@gmail.com

categories:Sporting GoodsGuns

21223 impressions

1081 views

Selling/trading a New York Pistol Co. Mohegan .32 rf revolver. Overall it's in fair shape but will need some parts to be functional. Antique status, no PAL required to purchase - just proof of age. 3" octagonal barrel, 5 shot. Frame, barrel and cylinder all have factory engraving which shows well. Finish has turned to a lighter patina throughout. Grips aren't original and are ill fitted. Bore is starting to darken but still had distinct rifling. Hammer does not cock, will need some internals to be functional (springs, cocking mechanism). Will be sold as is with no warranty or guarantees. Looking for $395 shipped. Insurance by request on buyer. Open to all trades. Can send more pictures upon request. Pm or text/call 204 795 2850 for more info.

categories:Sporting GoodsGuns

1133 impressions

122 views

Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.

categories:Sporting GoodsGuns

23427 impressions

828 views

Howdy Townpost! I have a unique one for you this time. You there sir or madam! You wouldn't want to travel these dangerous streets without some form of protection under your coat! Have a look at this and turn off barrel pistol with a switchblade bayonet for backup, made by Mr. Nock. You may need it should you encounter any rowdies! This is a single shot box lock percussion pistol. It's a screw-barrel meaning you unthread the barrel, fill the powder chamber and place a ball on top it. You then use the barrel itself and the threads to seat the ball inside of the breach. Then a percussion cap on the nipple, put it at half cock put it in your dapper overcoat and pull it out should you meet any Scallywags on your travels. In my opinion this is an early Samuel Nock made Circa 1840s pistol. Based on comparable examples I've seen and the style of Engraving and construction of the pistol this appears to be an early production Samuel Nock made pistol. Samuel Nock was the nephew and an apprentice of of the more famous Henry Nock. Samuel knock became a very skilled and renowned gun maker in his own right. Most of his guns would be marked S. Nock but some of his earlier stuff had only his last name. I suspect he was trying to trade on his more famous uncle's name at the time. Overall the pistol is in pretty good condition except for a small hairline crack in the frame (pictured). There is some moderate pitting in the bore however it looks worse in the photo than it actually is. This is a smooth bore pistol and is breech loading so the pitting shouldn't make it difficult to load or shoot. This pistol was intended for point blank range shooting by virtue of the fact that has a stubby little bayonet to use in case you missed your target. The pistol mechanically fine. The trigger and lockwork are all in good working order and the spring loaded bayonet mechanism works perfectly. They are often broken because of the small springs and the daily carry type use of these firearms. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:Sporting GoodsGuns

13073 impressions

269 views

Howdy Townpost. This is a nice little and fair conditioned pocket tip-up revolver, in .30 Rimfire. In the 19th century, XXX was used denote very strong malt liquor. So I think marlin was trying to market in the name that this is a stout little gun. Similarly done by Hopkins & Allen with the naming of their "XL" series of pocket revolvers. These were made by Marlin from 1873-1887 with a total of roughly 26,000 being made. They are essentially copies of the Smith and Wesson Model 1 1/2's and 2's. The mechanical condition of this firearm is excellent. The hammer and cylinder function reliably and as intended. Timing and lock up are excellent. The barrel is tight on the frame. This revolver was tuned by my gunsmith too. The bore is worn but there's some life left in it. There's frosting at the front of the cylinder and the forcing cone. The nickel is mostly present on the frame and the beautiful original rosewood grips are in excellent shape. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:Sporting GoodsGuns

14415 impressions

486 views

Please text anytime 6476871484. Fully functional antique revolver in mechanically perfect and ready to shoot condition ,very good action, no PAL needed. Reloadable ammo is available but sold separately Comes with FRT RCMP paperwork. Smith & Wesson 44New Model No. 3 Top Break, .44 Russian Revolver This one is in very good condition. The the serial numbers match . The action is strong and accurate, and the cylinder indexes and locks properly. The bore of the 6-inch barrel is quite good, with strong rifling. The black hard rubber grips are good and undamaged. Mechanically in excellent condition with proper timing and lockup. The latch is also solid with zero play. Extractor works as it should. SN 5819, very good overall. History & Background Smith and Wesson's first double action design dates back to at least 1872 - years before Colt ever attempted a double action cartridge revolver. It was mentioned in a letter to the Russian envoy General Orlof, and although the sale to Russia never materialized, it served to pave the way for the very popular and successful line of double action top break revolvers. The .44 Russian model was actually the first to be produced as a prototype, and the last to be released for sale to the public. For this reason there exists a degree of confusion over the proper terminology: the first one to be manufactured for sale was the .38 caliber model, followed by the .32. The .44 caliber model was not released until 1881, and is variably known as the No. 3 Double Action, the Double Action "Navy" (a name Daniel Wesson wanted to keep alive to differentiate this model from the No. 3 single action, and still holding out hope to sell it to the Russian navy), and the First Model Double Action. Originally, the .44 Double Action was made with a 1 7/16 inch cylinder, however an optional .44-40 version was available as of 1886. This required a 1 9/16 inch cylinder, and a longer frame. The firm soon realized that it was too expensive and cumbersome to manufacture two different sizes of frames for what was essentially the same gun, and the shorter cylinder and frame were dropped in favour of the longer one in the early 1890's. The No. 3 frame .44 double action top breaks were dropped from the Smith and Wesson catalogue in 1913.

categories:Sporting GoodsGuns

13243 impressions

528 views

Please text anytime 6476871484. Fully functional antique revolver in ready to shoot like new condition. No PAL required. Comes with RCMP FRT paperwork. This is conversion to 45ACP /45 Auto also compatible with .455 Webley As well as original 11mm ammo. This one is in excellent original condition. it is "in the white", meaning it has never been blued or plated. It is not pitted, and all the markings are sharp and complete. The serial numbers are repeated on all components: the barrel, cylinder, frame, grips, internal mechanism parts and even the screw heads and escutcheons. Everything matches. The bore of the 4 1/2 inch barrel is as perfect and it is mirror bright and the rifling is sharp. The action is excellent and accurate, and the cylinder indexes and locks properly. The walnut grips are excellent and show no damage this one looks like new. SN G47715, manufactured in 1886, rated excellent overall. MAS Mle 1873 French Service Revolver, 11mm French Ordnance The Mle 1873 was France's first double action cartridge revolver. After the disastrous loss to Prussia in the war of 1870, the French military closely examined its armaments and small arms, and they came to the conclusion that a new, more rugged and powerful side arm for their infantry was required. The result was the Mle 1873, designed by the famous partners of Chamelot & Delvigne, whose genius ideas would dominate much of the European military (and commercial) small arms market for decades to come. Many European countries adopted their designs, including Switzerland, Italy, Sweden, Russia and Belgium. Only the Brits and Germans would continue to develop their own side arms.

categories:Sporting GoodsGuns

19961 impressions

1437 views

Please text anytime 6476871484. Brand new in original box. Multifunctional one of the kind pocket flare gun 70% steel construction. Upgraded special edition. This was a unique design made to be small, lightweight yet very sturdy. The barrel and handles are constructed of DuPont Zytel reinforced with fiberglass strands. The frame is heavy steel construction and coated to prevent corrosion. Just 6” in length. Made in the early 70’s to be far superior to the Orion models. Keep Handy For Emergencies . This special edition gun unlike regular model has many significant improvements it is compatible with all 12ga flares, bangers and adapters for different subcaliber blanks from .22 to 9mm etc. it has front sight and horrendous safety system from previous model has been removed.

categories:Sporting GoodsGuns

57603 impressions

5334 views

Please text anytime 6476871484. Fully functional double action revolver in perfect ready to shoot condition. No PAL required. Test fired with smokeless powder. Comes with FRT paperwork. Reloadable ammo is available but sold separately. Colt M1892 "New Army" Revolver has significant improvements over M1889 with better locking and indexing mechanism. This one is in excellent condition. The nitre blue on the trigger and hammer is well visible and retains 95% of original blued finish. The action is strong and accurate, and the cylinder indexes and locks properly with zero play on trigger pull. The bore of the 4 1/2 inch barrel is excellent and mirror bright with perfect strong rifling. The markings are sharp and defined throughout. Extractor working as it should. The assembly numbers on the cylinder, crane and frame. The original grips are good and undamaged.​​ S/N 13345 History & Background This model is an important milestone in Colt handgun development, as it is the first American revolver with a swing-out cylinder mounted on a crane, a development which would become the standard for modern revolvers to this day. The 1889 cylinder mechanism was already "on the books" as early as 1880, based on designs of Colt engineers William Mason, C.J Ehbets and Horace Lord. It would take almost ten years for Colt executives to give the green light to manufacture this gun, and once it was available, the US government quickly took notice and ordered several thousand for the Navy. Colt adopted the name "New Navy" in honor of this order. The gun has an interesting counter-clockwise cylinder rotation and a locking mechanism which relies entirely on the two-pronged hand.The 1889 model would remain in production for 18 years, with significant improvements in 1892, 94, 95, 96, 1901 and 1903. When it was first introduced in 1889, it met with no competition from the other major makers - Smith & Wesson were still heavily engaged in manufacturing top-break revolvers, and Remington only had their solid frame revolvers with removable cylinders to offer. It would take S&W another ten years before they had a viable alternative to Colt's design.

categories:Sporting GoodsGuns

18859 impressions

1078 views

Please text anytime 6476871484. Fully functional revolver in perfect ready to shoot condition. No PAL required. Reloadable ammo is available and sold separately. Hopkins & Allen "XL No. 4", .38 RF Pocket Revolver The markings are sharp and the numbers match on the frame, barrel and cylinder. The action is strong and tight, and the cylinder indexes and locks properly. The bore of the 2 1/2 inch barrel is very good, with strong rifling. The rosewood grips are excellent and undamaged, with varnish intact. SN 289, very good overall. History & Background One of the most prolific makers in America was the firm of Hopkins & Allen. Founded in 1868 by the principals Charles Converse, Charles and Samuel Hopkins, and Charles Allen, the firm assumed the assets of the Bacon Manufacturing Company. H&A used Bacon's machinery and inventory of parts, and continued at first to make Bacon's various models before switching to cartridge revolvers and later rifles and shot guns. H&A was in business until 1915, and claimed to be the "largest manufacturers of high-grade, popular priced firearms in the world". Hopkins & Allen were well known for their pocket revolvers and Merwin & Hulbert branded large-frame revolvers. H&A are generally of a better quality and workmanship than other suicide specials.

categories:Sporting GoodsGuns

7926 impressions

488 views

Please text anytime 6476871484. Fully functional pocket handgun in perfect like new condition. No PAL required. Ammo is available but sold separately. Comes with FRT paperwork. Sharps & Hankins "No. 3 C" Four-Barrel Pepperbox, .32 Caliber Rim Fire , SCARCE This one is a Sharps & Hankins four-barrel pepperbox classified as a "Model 3C". It is characterized by the button-type barrel release and ejector mounted between the barrels. It is chambered for the .32 rim fire cartridge. The gun is in excellent condition, with original blue intact and the case colors on the frame. The markings are sharp and clear. This is a unique variant with a floating, internal firing pin which rotates a quarter turn with each cocking of the hammer and these are rarely encountered. The 4 bores are good with strong rifling all the way. The black gutta percha grips are excellent and undamaged. SN 5822, excellent overall. Christian Sharps (1811-1874) was one of the best-known firearms designers and manufacturers of the 19th century. Although he never achieved the volumes of Colt, S&W and Remington, Christian Sharps was a major supplier of long arms to the Union during the civil war. His carbines are iconic among civil war collectors. Sharps sporting rifles were extremely popular at the time, and still fetch premium prices to this day. Christian Sharps had a rocky and sometimes acrimonious relationship with his managers and partners, and would leave the Hartford firm in 1853, returning to Philadelphia. There, he formed a new company in 1854, called C. Sharps & Co. He manufactured pepperboxes and single-shot pistols, while the Sharps Rifle Co. continued with long arms. In 1862, Christian Sharps formed "Sharps & Hankins", in partnership with William Hankins, who had sold his own plant to William Uhlinger. Sharps & Hankins would continue until 1866, producing their four-barrel pepperboxes, single shot pistols, and military grade long arms in competition with his former company in Hartford. Soon after the war, the partnership was dissolved, and Sharps would go back to his previous name of C. Sharps & Co. He continued to manufacture the four-barrel pepperboxes until 1874, when the firm was dissolved after his death.

categories:Sporting GoodsGuns

8181 impressions

380 views

Please text anytime 6476871484. Brand new in original box. No PAL required . Umarex AirJavelin Air Archery Rifle comes with 2 adapters for 1 and 2 Co2 12g cartridges to use instead of 88gr CO2. 300 FPS 34 FPE 27 shots Powered by (1) 88gr CO2 or (2) 12gr or (1) 12gr  with adapters included. Straight-pull, bolt action cocking Integrated picatinny rail for optics and accessories Push button safety Will accept aftermarket quivers Fixed orange fiber optic front sight Adjustable rear sight Adjustable AR style buttstock M-Lok mounting slots on right and left sides of the rifle Includes 3 arrows Umarex introduces a new tool for small game hunting and recreational arrow shooting with the AirJavelin! Powered from a single 88 gram CO2 cartridge for up to 27 shots, the AirJavelin provides easy accuracy and enjoyment for the whole family. At under 4lbs without CO2 installed, the rifle is easy to manuever and thanks to an easy adjusting AR style buttstock, can be made to fit shooters of all sizes quickly. Sending 170 grain bolts at speeds up to 300 FPS, the AirJavelin produces energies of around 34 FPE at the muzzle. While this may not seem like a powerhouse, simply unthreading the field tip and screwing on a broadhead turns this rifle into a nightmare for small game! And because the arrow is propelled from the front, there is no "archers paradox" to concern yourself with, meaning your shots will find their mark time and time again. The AirJavelin has plenty of room for accessories. With a full length picatinny optics rail, you have space to mount the optic of your choice, with room to spare for lights and lasers. In addition, there are also M-Lok mounting slots on the right and left sides of the frame allowing for even more accessories, like a quiver or a bipod. The possibility are seemingly endless.

categories:Sporting GoodsGuns

39940 impressions

3790 views

Please text anytime 6476871484. Fully functional double action revolver in perfect ready to shoot condition. No PAL required. Comes with FRT paperwork. Reloadable ammo is available but sold separately. Tested with smokeless powder. Colt M1892 "New Army" Revolver has significant improvements over M1889 with better locking and indexing mechanism. This one is in excellent condition. The nitre blue on the trigger and hammer is well visible. The action is strong and accurate, and the cylinder indexes and locks properly. The bore of the 4 1/2 inch barrel is fine with good rifling. The markings are sharp and defined throughout. Extractor working as it should. The assembly numbers on the cylinder, crane and frame. The original grips are good and undamaged.​​ History & Background This model is an important milestone in Colt handgun development, as it is the first American revolver with a swing-out cylinder mounted on a crane, a development which would become the standard for modern revolvers to this day. The 1889 cylinder mechanism was already "on the books" as early as 1880, based on designs of Colt engineers William Mason, C.J Ehbets and Horace Lord. It would take almost ten years for Colt executives to give the green light to manufacture this gun, and once it was available, the US government quickly took notice and ordered several thousand for the Navy. Colt adopted the name "New Navy" in honor of this order. The gun has an interesting counter-clockwise cylinder rotation and a locking mechanism which relies entirely on the two-pronged hand.The 1889 model would remain in production for 18 years, with significant improvements in 1892, 94, 95, 96, 1901 and 1903. When it was first introduced in 1889, it met with no competition from the other major makers - Smith & Wesson were still heavily engaged in manufacturing top-break revolvers, and Remington only had their solid frame revolvers with removable cylinders to offer. It would take S&W another ten years before they had a viable alternative to Colt's design.

categories:Sporting GoodsGuns

20512 impressions

2276 views