Selling/trading a Thompson Center Impact Stainless 50 cal muzzleloader. Overall it's in good shape. 26" barrel, 209 ignition. Steel is in nice shape, shows some light marks here and there - nothing major. Camo stocks show some normal hunting marks/wear but are also in nice shape. The bore does have some rust from not being kept clean, would most likely clean up a bit better with some elbow grease but some of the pits are fairly decent near the breach. Comes topped with its original iron sights as well as a Bushnell Banner 4x32 with 1" Weaver rings and a Weaver rail. Looking for $395 shipped. Insurance by request on buyer. Open to all trades. Can send more pictures upon request. Pm or text/call 204 795 2850 for more info.

categories:Sporting GoodsGuns

1822 impressions

179 views

i have 2 butcher beefs for sale .grain fed AAA about 840 to 925 carcass weight will sell a half also .sold on the rail 5$ plus butcher fee and cut and wrap to the butcher of your choice . also have a cull cow for hamburger 1400 $$live about 1300p also grain fed

categories:Pets and AnimalsLivestock

1714 impressions

549 views

Custom Savage Model 110 7mm rem mag Bell & Carlson stock (black with red spiderwed) JC custom barrel Custom muzzle break Timney trigger Burris 25 MOA rail Oversized bolt knob 2 clips Overall good shape and cared for, aprox 4 boxes down the pipe, A few nicks from use. This gun is a tack driver! PAL required for purchase, will ship at buyers expense in Canada.

categories:Sporting GoodsGuns

4442 impressions

212 views

2018-2024 Jeep Wrangler JL Unlimited Mopar Rock Rails like new less than 6 months old. 1000.00$ OBO.

categories:Auto and Trailers

3075 impressions

416 views

CO2 powered BB guns are great fun for plinking and target shooting. Check out the Umarex® HK USP BB Air Pistol. It holds 22 rounds in a heavyweight magazine that also houses the CO2 cylinder that powers this BB pistol. It has an ambidextrous magazine release, integrated accessory rail and realistic hammer movement. This is a great practice pistol for 9mm USP owners. For just pennies a shot you can shoot for hours. CalibreBarrel LengthOverall LengthVelocityMagazine Capacity.1774-1/2"7-1/2"400 fps22 rounds including CO2 Cylinders - 5-Pack and Steel BBs

categories:Sporting GoodsGuns

1881 impressions

118 views

Brand new Tikka T1x, Right hand, 20" rifle has been modified to further increase the accuracy. Right hand, 19.5" barrel. Fully Ceracoted (barrel and action) Graphite Black, recessed target crown, match chamber (barrel removed and set back slightly, in order to re-chamber). Comes with 15 min Picatinny rail. Unfired before or after modifications!

categories:Sporting GoodsGuns

58208 impressions

3880 views

Brand new in box. Only ever took it out when I first got it and then now to take the photos. My original setup didn’t have an arca rail so I got this but my new one does so this is surplus to my needs. Paid $250+shipping, willing to let it go for $200 shipped via purolator or alike due to the Canada post strike.

categories:Sporting GoodsGuns

1888 impressions

210 views

Ruger American rimfire in 22lr with a cold hammer forged heavy target barrel The action and barrel are in really good condition with this rifle and appears to not have been cycled a lot I purchased it for the hardwood stock that was previously on it for another rifle and put this synthetic stock on it, the stock does have some minor blemishes. I also added a mdt 20moa optics rail to the rifle Face to face deal only, must have pal May trade for a pump action .410

categories:Sporting GoodsGuns

8742 impressions

369 views

First Gen weatherby vanguard badlands edition in 270 win. Bought it thinking id like the internal magazine and Im just not a fan. Bought for 1300 plus the scope rail was 100. Has 24 inch barrel, full cerakote bronze everything. Asking 1000 for it. Willing to consider trades for a 6.5 cm Just received a 10 round detachable magazine kit for it, currently installed. With the magazine kit id ask 1100. Without, would be the listed 1000

categories:Sporting GoodsGuns

4489 impressions

301 views

Hi,  I am offering for sale my excellent scout rifle . Rifle like new, was few times shot for the demonstration and night time. This rifles sale now from $1700 to $1900 CAD without scope, rings, sling and with 1 magazine plus HST.  This is very good price for this package. Rifle super accurate and reliable.  Also 7 years warranty.   Franchi sets a new standard for everyday use rifles with the Momentum All-Terrain Elite. It has all the accuracy-enhancing, recoil-mitigating features found in other Momentum firearms, but is  optimized for carry in a truck or ATV as your constant companion. The  .308 models can shoot their 7.62 NATO counterparts. The sleek, modular stock has a low-rise comb and is equipped with M-LOK and QD sling attachment points. It's topped with a long, free-floated Picatinny rail so you can mount optics traditionally, or in a scout rifle configuration. Flip-up  adjustable sights give you multiple sightpicture options. The threaded, free-floating 18-inch barrel comes with a muzzle brake and is ready to accept your suppressor. A 10-round Magpul AICS magazine is included, and a number of aftermarket options are available to customize the fit  and feel of your rifle. INCLUDING IN THIS OFFER: RIFLE MOMENTUM ALL-TERRAIN ELITE .308 x 1 10-round Magpul AICS magazine x 3 5-round Magpul AICS magazine x 1 Vector Optics Taurus 3-18x50mm First Focal Plane (FFP) 1/10 MIL Tactical Riflescope with Red Illuminated Reticle,  Lens Covers and KillFlash honeycomb QD quality tactical scope rings x 1   Condor tactical suspended sling x 1 Muzzle brake x 1 Please text me if you want to possess this awesome package, to begin your target shooting or big game hunting, please tex me: 6479095408

categories:Sporting GoodsGuns

3146 impressions

211 views

2 X 6000 lbs axles, Manual hydraulic tilt, (works every time) Automatic tilt up/down or manual tilt up/down. Has ramps to for easy low riding car loading. 2-5/16 hitch and break away switch. Frame all HD 6" channel. Rub rail and stake pockets. Extra HD tool boxes for chains and boomers. Real HD custom 3/16 fenders. Anti slip rear beaver tail. Bulldog jack. 80 inch between fenders. Good tires 80%, Good new brakes, Good lights. Needs nothing/no fixing. AB reg/vin. No online offers, come and look. If u se it I have it. In Stony Plain area.

categories:Auto and Trailers

1145 impressions

184 views

EGE Arms E40T, 12 gauge, over under short tactical M-lok shotgun, black, E40TBLK Condition : new Tax rates shipping into your province NB, PEI, NS, NL, all pay 15% Ont, pays 13% Everybody else pays 5% GST only contact john at Doctor Deals 506-855-5377 e-transfer only Shipping through Canada Post, 18+ Signature Warranty available Specifications Non restricted Caliber: 12 Gauge Chamber: 3″ Capacity: 2 Choke: Cylinder, Modified, Full Break-Action Full Length: 26″ Sights: Fiber optic Barrel Length: 30 cm — 11 & 7/8″ LOP : 12″ Overall Length : 26.5″ Weight : 2.6 kg Made in Turkey Features Solid with A slick look ! M-lok slots bottom left & right ! Soft rubber butt pad 12 Gauge, 2 & 3/4 to 3″ 2 shot capacity Picatinny Accessory Rail ready to mount your favorite red dot Also acts as v-grove rear sight Break action with extractor Ambidextrous Safety/Selector Red fiber optic front sight Chokes : Cylinder, Modified, Full, case included (no key included) 2 side picatinny accessory rails already mounted and ready to rock! Rails also seems to have A QD mount slot on each side.

categories:Sporting GoodsGuns

7689 impressions

791 views

Rifle is in new condition , Monte Carlo stock, machined pic rail on reciever,when they still built them right, low round count , muzzle break included, Swaro Z5 3.5-18x44 optic with ballistic turret. Shoots very small groups,with factory ammo, has become a safe queen. Also I found acuople of boxes of the factory ammo which would be included.Pelican case included

categories:Sporting GoodsGuns

59469 impressions

2877 views

Text or call - preferred communication. I do not check messages on Townpost and e-mail is checked only once daily. Howa 1500 Mini Action 6.5 Grendel. 20" Heavy Barrel, Green HTI Pillar Bedded stock. 5rd Detachable Mag. Warne Scope rail. This is 6.5 Grendel - not Creedmoor. Fun low recoil intermediate cartridge good for target, varmint and small game up to a deer-size. Like new both cosmetically and function. Asking $900.00 In original box, Manual, receipt. Scope rail is included with riflr. Excellent accuracy 0.5 - 0.75" with Hornady 120gr reloads. If interested will sell dies and ~50 used brass which were shot 2-3 times. Local sale in Calgary; prefer not to ship. Or the cost of shipping and the risks are on the buyer. PAL is a must and will be verified online as per currrent legislation prior to pick-up. Will ask for the picture of your PAL and the e-mail that you have on file with RCMP. Please no PMs on townppost as I am away from the computer most of the time.

categories:Sporting GoodsGuns

16802 impressions

900 views

Brand new Non-restricted Caliber: .44 Mag Capacity: 8 Rounds Action: Lever Action Safety: Thumb Safety Front Sight: Drift Adjustable Rear Sight: Peep Hole Sight on picatinny rail Barrel Length: 16.5" Threaded Barrel / Frame Finish: Black Cerakote Barrel / Frame Material: Alloy Steel Twist Rate: 1:30" RH Stock: Walnut (Black Cerakote) Overall Length: 33.7" Overall Height: 7.8" Overall Width: 1.5" Weight: 6.0 lbs. Made in Brazil

categories:Sporting GoodsGuns

5475 impressions

507 views

Brand new, PAL Required Non-restricted .50 calibre Precharged pneumatic (PCP) German made Barrel with .510 diameter grooves 2-round chamber magazine (includes 2) Rifled barrel Straight pull speed-bolt with 2 lbs cocking effort 3-lb trigger weight Regulated to 3,000 psi per shot 4,500 fill pressure (24 cubic inch carbon fiber tank) Built-in manometer (pressure gauge) Weaver/Picatinny optics rail PolyOne designed and manufactured stock AR Magpul style grip Integrated rear sling stud 3 slots in forearm grip to accept M-LOK attachments Quick Disconnect Foster fitting 43.75-inch overall length 8.5 pound overall weight unloaded without scope 29.5-inch barrel length Made in the USA

categories:Sporting GoodsGuns

4863 impressions

291 views

Selling/trading a Thompson Center Encore 209x50 cal barrel. Overall it's in excellent shape. 28" fluted barrel, takes 209 primers, with quarter turn breech plug. bluing is in excellent shape with no real notable imperfections. Bore is excellent. Forend is also very nice with only light handing marks here or there. Has its original iron sights and a Weaver rail with Weaver V9-B 3-9x40mm scope and 1" Weaver rings. ram rod doesn't look to be original. Looking for $575 shipped. Insurance by request on buyer. Open to all trades. Can send more pictures upon request. Pm or text/call 204 795 2850 for more info.

categories:Sporting GoodsGuns

3808 impressions

403 views

Selling/trading CZ 584-03 Model 2 combo gun in 12 gauge over 22 Hi Power (5.6x52R). Overall it's in nice shape. 24" barrels. Steel is all in nice shape, shows normal bluing fading here and there. Wood stocks are also in nice shape, a few normal bumps and marks here or there - relatively minor. Bores are excellent, lockup is tight. Factory grooved rail and come with its original iron sights. Will come as seen with Butler Creek sling. Looking for $950 shipped. Insurance by request on buyer. Open to all trades. Can send more pictures upon request. Pm or text/call 204 795 2850 for more info.

categories:Sporting GoodsGuns

6720 impressions

540 views

Brand new Compatible with 34mm Maintube 2″ Forward Cantilever Offset Height: 1.46″/37mm Quick Release Mechanism Mount on Picatinny/Weaver Rails Aluminum Construction Type III Anodized Finish Give your riflescope solid support using the EOtech 34mm PRS QD Cantilever Ring Mount. This cantilever adapter is compatible with 34mm maintubes and mounts on Picatinny or Weaver rails. It provides a 2″ forward offset for tailoring eye relief and head placement, and has a quick release mechanism for fast and easy attachment. The mount is made of aluminum with a Type III hard anodized finish and provides precision, stability, and strength when you attach your riflescope to your firearm.

categories:Sporting GoodsGuns

3180 impressions

525 views

This Tikka T1X MTR is in excellent condition and comes with two stocks. The original polymer stock has been upgraded with an adjustable Mathews cheek riser, a Tikka vertical grip and a bi-pod mounting rail. The AT-ONE Thumbhole Boyd stock features an adjustable check riser, adjustable LOP butt stock with rubber pad, a Target Overmold forearm and a bi-pod mounting rail. The action has been epoxy bedded and the 16 1/2" barrel is free floating. The included custom made bracket for unsupported shooting stages, easily and securely attaches to the stock, allowing the shooter to support the rifle at the correct balance point. The rifle features Tikka's smooth action and clean breaking, adjustable, single stage trigger. Ships with two 10-round magazines. The Bushnell Engage scope is mounted on top of a MDT 20 MOA rail using Burris XTR Signature 10 MOA rings for a total elevation gain of 30 MOAs. The scope features locking turrets, the Deploy MOA (SFP) reticle, a 30 mm tube, 50 MOA windage and elevation adjustment & parallax side adjustment (10 yds to infinity) and has been fitted with a bubble level. Elevation adjusts at 15 MOA per rotation and tracks accurately. Bushnell's life time warranty is transferable. The Atlas type bi-pod attaches securely to either stock. The legs extend from 4 1/2" to 8" and have rubber tips. Shipping available at Buyer's Expense. Ships with scope unmounted. Valid PAL Required. Seller's Rating: I am new to selling on this platform, but have conducted business on E-bay for 25 years. To check my E-bay rating go to ebay.ca, click on the “Advanced” button right of “Search”. Then click on “by seller” on the left and select “only show transaction from”. Type in “andreascb”. Now click on any of my listings to see my rating on the right side. For details of feedback received, click on “100% Positive”.

categories:Sporting GoodsGuns

6996 impressions

323 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Sporting GoodsGuns

2553 impressions

398 views