Photo of SWISS SCHMIDT RUBIN K11 M1911 CARBINE 7.5mm X 55mm  1931 Manufacture
$1400
SWISS SCHMIDT RUBIN K11 M1911 CARBINE 7.5mm X 55mm 1931 Manufacture
SWISS SCHMIDT RUBIN K11 MODEL: 1911 Action CARBINE CALIBER: 7.5 X 55, COMES WITH MAGAZINE, BORE IS VERY GOOD, SHINY. MADE IN 1931, VISIBLE NUMBERS MATCH. BLADE FRONT SIGHT WITH EARS, ADJUSTABLE U NOTCHED REAR SIGHT, BROWN POLYMER BOLT KNOBS, SILVER BOLT. TWO PIECE FULL MILITARY WOOD STOCKS, FINGER GROOVED FOREND, PISTOL GRIP, SMOOTH STEEL BUTT PLATE, SWIVELS WITH METAL HOOK FROM SLING ON ONE OF THEM, STACKING HOOK, BAYONET LUG. METAL FINISH SHOWS SOME NORMAL SCRATCHES, HANDLING MARKS AND WEAR. STOCKS SHOW SOME NORMAL SMALL MARKS, SCRATCHES AND WEAR. ACTION: STRAIGHT PULL RIFLE, BARREL LENGTH: 23.25" CLASS: CANADIAN NON RESTRICTED. Excellent Overall Condition An improvement over the original 1889 version of the Schmidt–Rubin rifle, the Swiss M1911 placed the locking lugs in the middle of the bolt, rather than at the rear, strengthening the action and allowing a more powerful cartridge, the Gewehrpatrone 11 or GP 11 to be used. It is distinguished from the 96/11 rifle by a curved butt plate and by a stock with an integral semi-pistol grip. It uses a graduated tangent sight which begins at 300 meters. The 1911 and 96/11 rifles were made with excellent craftsmanship, and were exceptionally accurate. As Switzerland remained neutral through both world wars, remaining rifles are typically in far better condition than other European rifles of the time. CFP/RCMP courtesy of Bill C-71 require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Sections 99 & 101 of the Criminal code.
categories:Sporting GoodsGuns
33084 impressions
1399 views
Saskatoon, SK1 day ago
Photo of Swedish Mauser 30.06 1896 Mauser Action  23" barrel 5+1 hinge plate
$425
Swedish Mauser 30.06 1896 Mauser Action 23" barrel 5+1 hinge plate
Swedish Mauser action with Husqvarna barrel in 30.06, Sporter stock in good condition with butt pad cushion, swivel mounts, semi pistol grip with base cap. Knurling is in good condition. Adjustable rear sight for elevation. Overall good condition. Receiver is tapped for scope mount bases. All Swedish Mausers other than trials rifles were chambered for the 6.5×55mm Swedish cartridge, and all Swedish-made actions were proof-tested with a single 6.5×55mm proof round developing approximately 455 MPa (65,992 psi) piezo pressure (55,000 CUP).[4][5] Swedish Mausers were manufactured by Waffenfabrik Mauser AG in Oberndorf a/N in Germany and in Sweden by Carl Gustafs Stads Gevärsfaktori and Husqvarna Vapenfabriks Aktiebolag. All Swedish Mausers, whether built in Germany or Sweden, were fabricated using a Swedish-supplied high grade tool steel alloyed with nickel, copper, and vanadium, a product then noted for its strength and corrosion resistance. These rifles, like other pre-M 98 system Mauser rifles, lack the third safety locking lug at the rear of the bolt and feature "cock-on-closing" (similar to the contemporary Lee–Enfield rifle). CFP/RCMP courtesy of Bill C-71 require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Sections 99 & 101 of the Criminal code.
categories:Sporting GoodsGuns
44218 impressions
2500 views
Saskatoon, SK1 day ago
Photo of Howa 1500 .223 Rem Heavy Barrel Blackhawk Talon Stock Internal 5+1
$1750
Howa 1500 .223 Rem Heavy Barrel Blackhawk Talon Stock Internal 5+1
Howa 1500 .223 Rem Heavy Barrel Blackhawk Talon stock Internal 5*1 with adjustable grip inserts. manual, picatinny rail. Very low round count. Excellent condition. Howa 1500 barreled action Tool-less Firing Pin Removal Machined Receiver and Forged Bolt Large Internal Bolt handle and pressure vent holes One of the safest actions on the market Reliable M-16 Style Extractor/Ejector Stringent and Exacting Headspace specs Bolt Faces are True and Square to Chamber Two Stage Match Trigger 3 Position Safety SUB MOA – 3 Shot Group @ 100 yds with premium factory ammo The Synthetic BlackHawk Talon Rifle Stock comes with a durable, rubber recoil pad and sling swivel studs already mounted. The Talon Thumbhole Stock is the engineered fusion of the patented Knoxx recoil-reducing technology, ergonomic control of a pistol grip and time-tested elements of a traditional thumbhole stock. Reliable and built to last, this stock will help improve accuracy, target re-acquisition times and firearm control. Strategically placed texture and grooves on the pistol type grip and for-end ensures a positive grip when handling your rifle. The stock has aluminium pillars for increased stability when tightening down your actions screws giving you a solid point and preventing compression of the fiberglass reinforced polymer skeleton. The BlackHawk Talon stock has a dual recoil-compensation system to reduce the harsh recoil of bigger calibers. The stock is also completely ambidextrous benefiting both right and left handed shooters. Guaranteed to look great, feel great, and shoot straight! The tactical looking yet attractive durable finish on the stock together with the rubber recoil pad make for a comfortable shooting experience. The Howa Blackhawk Talon rifle stock represents excellent value and combines Howa’s famous prowess in manufacturing with a sleek high quality finish to compliment any rifle that will outlast the adventures that lie ahead. CFP/RCMP courtesy of Bill C-71 require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Sections 99 & 101 of the Criminal code
categories:Sporting GoodsGuns
50386 impressions
1744 views
Saskatoon, SK1 day ago
Photo of Lee Enfield No: 1 Mark III 1938 GR1 Singapore SMTLE
$1600
Lee Enfield No: 1 Mark III 1938 GR1 Singapore SMTLE
Lee Enfield No: 1 Mark III 1938 GR1 Singapore SMTLE . 303 BRITISH 10 round Mag, full wood, swivels, bayonet lug with pig sticker bayonet included, rear brass butt plate with tool kit compartment, 2000m rear adjustable iron sight. Frame and butt stock medallion match. Mag number unreadable. Length: SMLE No. 1 Mk III: 44.57 in (1,132 mm) Barrel length: SMLE No. 1 Mk III: 25.2 in (640 mm) In late 1915 the Mk III* was introduced incorporating several changes, the most prominent of which were the deletion of the magazine cut-off mechanism, which when engaged permits the feeding and extraction of single cartridges only while keeping the cartridges in the magazine in reserve, and the long-range volley sights. The windage adjustment of the rear sight was also dispensed with, and the cocking piece was changed from a round knob to a serrated slab. Rifles with some or all of these features present are found, as the changes were implemented at different times in different factories and as stocks of parts were depleted. The magazine cut-off was reinstated after the First World War ended, and not entirely dispensed with in manufacturing until 1933. The SMLE Mk III* (renamed Rifle No.1 Mk III* in 1926) saw extensive service throughout the Second World War, especially in the North African, Italian, Pacific and Burmese theatres in the hands of British and Commonwealth forces. Australia and India retained and manufactured the SMLE Mk III* as their standard rifle during the conflict, and the rifle remained in Australian military service through the Korean War, until it was replaced by the L1A1 SLR in the late 1950s.The Lithgow Small Arms Factory finally ceased production of the SMLE Mk III* in 1953.
categories:Sporting GoodsGuns
39437 impressions
1530 views
Saskatoon, SK1 day ago
Photo of SWISS SCHMIDT RUBIN 1896/ K11 INFANTRY RIFLE 7.5mm X 55mm Manufactured: 1911-1920
$1160
SWISS SCHMIDT RUBIN 1896/ K11 INFANTRY RIFLE 7.5mm X 55mm Manufactured: 1911-1920
SWISS SCHMIDT RUBIN, MODEL: 1896/11 INFANTRY RIFLE, CALIBER: 7.5 X 55 Very good original condition 1911-1920 conversion date to M191 action.. SWISS SCHMIDT RUBIN, MODEL: 1896/11 INFANTRY RIFLE, CALIBER: 7.5 X 55, COMES WITH MUZZLE COVER, BORE IS VERY GOOD. VISIBLE NUMBERS MATCH. BARLEY CORN FRONT SIGHT WITH RAMP, ADJUSTABLE U NOTCHED REAR SIGHT, SILVER BOLT WITH RED POLYMER BOLT KNOBS. TWO PIECE FULL MILITARY WOOD STOCKS, FINGER GROOVED FOREND, MILITARY MODIFIED PISTOL GRIP, SMOOTH STEEL BUTT PLATE, SLING SWIVELS, STACKING HOOK, BAYONET LUG. METAL FINISH TURNING SILVER GREY WITH LIGHT PITTING, SCRATCHES, HANDLING MARKS AND WEAR. STOCKS SHOW DINGS, MARKS AND WEAR. ACTION: STRAIGHT PULL RIFLE, BARREL LENGTH: 30.75", CLASS: CANADIAN NON RESTRICTED. The Schmidt–Rubin rifles were a series of Swiss Army service rifles in use between 1889 and 1958. They are distinguished by the straight-pull bolt action invented by Rudolf Schmidt and use Eduard Rubin's GP90 7.5×53.5 and GP11 7.5×55 Schmidt–Rubin rifle cartridge. The Schmidt–Rubin 1896/11 rifle, or the Model 96/11, was a Swiss upgrade to the 89/96 rifles they had, to use the more powerful cartridge adopted as the GP11. The GP11 cartridge operated at a higher chamber pressure, which the 89/96 action could easily handle. The model 89/96 rifles were modernized by changing the three-groove rifled barrel to a new 4-groove type, adding a pistol grip to the stock, changing the magazine to the 6-round type used in the 1900 short rifle, and modernizing the sights. This also streamlined the appearance of the rifles. Because more rifles were needed than were available, the model 1911 rifle, with slight changes, was put into production. Almost all of the 127,000-plus model 89/96 rifles were converted to the 96/11 specifications. An improvement over the original 1889 version of the Schmidt–Rubin rifle, the Swiss M1911 placed the locking lugs in the middle of the bolt, rather than at the rear, strengthening the action and allowing a more powerful cartridge, the Gewehrpatrone 11 or GP 11 to be used. It is distinguished from the 96/11 rifle by a curved butt plate and by a stock with an integral semi-pistol grip. It uses a graduated tangent sight which begins at 300 meters. The 1911 and 96/11 rifles were made with excellent craftsmanship, and were exceptionally accurate. As Switzerland remained neutral through both world wars, remaining rifles are typically in far better condition than other European rifles of the time. CFP/RCMP courtesy of Bill C-71 require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Sections 99 & 101 of the Criminal code.
categories:Sporting GoodsGuns
30567 impressions
1320 views
Saskatoon, SK1 day ago
Photo of 12GA to 22 Magnum SMOOTH BORE - gun Adapter - Stainless NEW $110
$110
12GA to 22 Magnum SMOOTH BORE - gun Adapter - Stainless NEW $110
Please text anytime 6476871484. Brand new 12GA to 22 MAGNUM Shotgun Adapter Designed for break-open shotguns Precision machined from stainless steel made in the USA This adapter has a SMOOTH BORE This adapter gives your 12 Gauge single or double shot break open shotgun the ability to fire a 22Magnum bullet. This adapter is precision machined from high quality stainless steel to the OD specifications of a 2 3/4 12GA shell. It will easily fit into your break open shotgun barrel and accept any 22 Magnum ammunition. After firing simply remove the adapter and tip upside down to remove the spent 22 shell, or use your finger nail to grab and remove the shell while the adapter stays in your gun. The wide groove cut in the face will not only allow you to easily remove a spent shell but also provides a recessed clearance area for your firing pin. Adapters that don't have this recessed area (or recessed area in the wrong spot) do not provide the proper clearance for your firing pin and may damage your shotgun. A smooth bore is gently reamed through the adapter for the bullet (no rifling). Adapter orientation is not important and the adapter will work in any position. Will fit any break open shotgun with 2 3/4" or 3" chambers Carry one gun and have the ability to shoot not only 12GA shells but also 22 Magnum bullets Surprisingly accurate! Not recommended for pump action or semi-auto shotguns. Designed for use with break open style shotguns. This chamber / caliber reducer will NOT work with 22LR/22 long/22 short ammunition.
categories:Sporting GoodsGuns
29275 impressions
2352 views
Ontario3 days ago
Photo of 12GA to 22LR/22short SMOOTH/ RIFLED BORE  Adapter - Stainless steel NEW $110
$110
12GA to 22LR/22short SMOOTH/ RIFLED BORE Adapter - Stainless steel NEW $110
Please text anytime 6476871484. Brand new $100-110 12GA to 22 LR or 22 Short Adapter - SMOOTH BORE OR RIFLED!!! Precision machined from stainless steel Made in USA. This adapter has a SMOOTH Bore (rifled) This adapter gives your 12 Gauge single or double shot break open shotgun the ability to fire a 22lr bullet. This adapter is precision machined from high quality stainless steel to the OD specifications of a 2 3/4 12GA shell. It will easily fit into your break open shotgun barrel and accept any 22LR or 22 Short ammunition. After firing simply remove the adapter and tip upside down to remove the spent 22 shell, or use your finger nail to grab and remove the shell while the adapter stays in your gun. The wide groove cut in the face will not only allow you to easily remove a spent shell but also provides a recessed clearance area for your firing pin. Adapters that don't have this recessed area (or recessed area in the wrong spot) do not provide the proper clearance for your firing pin and may damage your shotgun. A SMOOTH bore is reamed through the adapter for the bullet. Adapter orientation is not important and the adapter will work in any position. Will fit any break open gun with 2 3/4" or 3" chambers. Perfect for 'Preppers' or your Bug Out Bags. Carry one gun and have the ability to shoot not only 12GA shells but also 22LR / 22 Short bullets. Surprisingly accurate! Not recommended for pump action or semi-auto shotguns. Designed for use with break open shotguns. This chamber / caliber reducer will not work with 22 magnum ammunition. Any ammunition pictured is for representation purposes and is not included with this purchase.
categories:Sporting GoodsGuns
39497 impressions
3110 views
Ontario3 days ago
Photo of Smith and Wesson No. 2 "Old Model Army", Mid frame antique Revolver $2100
$2100
Smith and Wesson No. 2 "Old Model Army", Mid frame antique Revolver $2100
Please text anytime 6476871484. Fully functional antique revolver in ready to shoot condition ,very smooth action. No PAL needed. Can shoot 32rf long and short. Comes with FRT RCMP paperwork. Smith and Wesson No. 2 "Old Model Army", .32 RF Revolver This one is in very good condition. With original blue. The action is strong and accurate, and the cylinder indexes and locks properly without play. The bore of the 5-inch barrel is very good, with sharp rifling and mirror bright. The rosewood grips are very good and undamaged. They look like they may have been re-varnished once. SN 59474, very good overall. History & Background Horace Smith and Daniel Baird Wesson acquired Rollin White’s patent (1855) for the bored-through cylinder to manufacture what they originally called the No. 1 revolver in .22 rim fire. It proved to be a rather ineffective little pocket revolver but was nonetheless very popular with civilians as a personal protective weapon. In 1861, just as the civil war gained momentum, S&W decided that they needed a larger caliber revolver in order to be able to convince the buying public (many of them enlisted in the war) that their gun was a viable protective option and as a back-up gun in battle. The scaled-up design was duly named the No. 2 and was nicknamed the “Army”, as it was widely used by military personnel as a personal side arm. Smith & Wesson retained and defended the Rollin White patent aggressively throughout the civil war period, and until its expiry in 1870, and therefore the No. 2 “Army” would be the only American made cartridge revolver used during this conflict (although several “unlicensed” makers added their wares into the fray, such as Uhlinger, Pond and Moore). The model is called “Old Model” due to its frame shape – the square butt and octagonal barrel of the model 1 ½ First Issue, as compared to the bird’s head grip and round barrel of the Second Issue. There is no “New Model” Army. The "No. 2 Old Model" was a popular personal side arm of many officers in the Union forces during the American Civil War, and is also known as the "Army" model. It was first introduced in 1861, and made until about 1874. The "No. 2" refers to the frame size, "No. 1" having been the first, .22 caliber pocket revolver and the "No. 3"'s being the large-frame revolvers. The 1 1/2 was introduced after the number 2, and since it fits in between the no. 1 and no. 2, it was named the no. 1 1/2. The no. 2 was owned by such famous Americans as General George Armstrong Custer and "Wild Bill" Hickok, the marshal of Deadwood...
categories:Sporting GoodsGuns
17009 impressions
534 views
Mississauga, ON3 days ago
Showing 21 of 1484 records
Location
Search within
of
Categories

Other6

Medical Equipment

Transportation options

Local Pickup1352Can Deliver107Can Ship409