Left handed Savage, comes with Calibre Specific Cabelas scope installed. Most accurate gun I’ve owned, I’m just getting old and have a lot of pain in my elbows and looking to get an ultra light gun which I’m hoping will be easier on me. Shoots best with the Remington Core-Lokt 130 grain ammo, but I haven’t tried a higher grain with it. Located in Lacombe, AB. I could possibly meet you in Red Deer, Calgary or Edmonton at some point if need be.

categories:Sporting GoodsGuns

1613 impressions

322 views

REMINGTON 740 CHAMBERED IN 308 WIN, NICE NEW FINISH ON WOOD, MECHANISM CLEANED AND READY TO SHOOT, NO RUST OR PITTING.  SLING SWIVELS. NIKON PROSTAF 3X9X50 RECENT SCOPE  ( OVER $350 VALUE ), NO OPEN SIGHTS ON GUN. NEW RECOIL PAD. ONE CHIP REPAIRED AT TOE OF STOCK , WELL DONE PROFESSIONAL REPAIR, SEE PIC.   SHIPPING IS $75 ANYWHERE IN CANADA.  CONTACT RENÉ AT 514 713 2310  OR ADCRENE65@GMAIL.COM

categories:Sporting GoodsGuns

2136 impressions

159 views

This is an interesting piece of Eastern Bloc history. A Polish Circle ⑪ FB Radom produced flare pistol. This flare gun is as new, I think it never shoots anything. These flare pistols feature all steel construction with synthetic grips. These are built tough to last thru years of rugged service. This 1966 pistol is a 26.5mm.   The flare gun ⑪ has an exposed hammer and a release trigger built under the actual trigger, this trigger opens up the flare pistol to remove spent shells or insert a new flare. There are flares made for 26.5mm flare pistols, but you can also use 12 Gage flares with the 12 G insert that is included. A black leather holster is included as well. No PAL needed, but You must be 18 years old or over to buy this flare gun. Price: $425 including FREE shipping Canada wide.   EMT is the best way to pay me.

categories:Sporting GoodsGuns

484 impressions

56 views

The Chiappa Rhino 60DS 4.5mm Black, The newest addition to the Rhino family developed by Chiappa themselves and manufactured by Wingun. This ultra realistic imitation firearm comes in black, nickel and limited edition gold. The realistic feel isn't the only thing going for the gun, a single CO2 cartridge fires approximately 34 shots with adjustable iron sights makes this a perfect plinking pistol. The 60DS stays true to the Rhino system, with the iconic barrel placement and sleek futuristic design, there is no doubt you're shooting a Chiappa! The Specs: Full Metal body and barrel Imitation wood grips with integrated CO2 key Single and double action Works on a single CO2 Capsule Picatinny mounting rail 6 shots Weighs 1080g

categories:Sporting GoodsPaintball and Airsoft

4344 impressions

550 views

NOT for SALE - LILJA Warranty reference only. MAY 7, 2024 - Fifth anniversary. News Update; By acquiring a quality bore scope, I was able to see the problem with barrel. The rifling lands in front of the chamber had separated from barrel for about 1.25" and 1 land was protruding into bore. Cut off 2" of barrel chamber end. Machined new barrel end to fit receiver tighter by .002" and rechambered for 22 short only. At range gun shot 1/4" - 5 shot group at 50 yds. shooting CCI 22 short - 27 gr. HP. Seems the rifling is not shot out but can not understand rifling land separation. UNIQUE -- NO WARRANTY or REFUND from LILJA. Call phone or e-mail only. No messages. Aug. 27/24: Over the past 3 years I just added 3817 rds. of CCI 22 shorts to round count. Still shooting 1/4" groups at 50 yds.

categories:Sporting GoodsGuns

212381 impressions

17635 views

Remington model 700 7mm08 Detachable magazine Leupold Rifleman3-9x40 scope 22” barrel Wood shows some use but gun is in great shape, shoots excellent 3/4 moa Also have a spare detachable magazine Can include 130gr load details if wanted.

categories:Sporting GoodsGuns

7963 impressions

858 views

Savage Model 24V combination gun chambered in .30-30 (rifle) over 20-gauge (shotgun). Solid, dependable hunting/survival platform — shoots well and gives you the flexibility of two calibres in one compact package. Comes with original iron sights and scope rail. Condition & repair: stock was professionally repaired by Proline Shooters (Calgary) for a hairline crack near the tang; repair is stable and cosmetically tidy (see picture). Metalwork and action are clean and function smoothly; barrels are true, extractor/cocking functions work reliably. Great choice for someone who wants a rugged, no-nonsense two-in-one rifle/shotgun. Why it’s useful: compact, simple break-action design that’s easy to maintain in the field — ideal as a survivalist or camp rifle, small-to-medium game hunting, or a dependable back-up. Two calibres cover a wide range of scenarios without carrying multiple long guns. Notes for buyers: Buyer must comply with all provincial/federal firearms transfer laws and present a valid firearms licence. Please text or email for additional information/pictures. No Trades. Rifle is located in North Battleford. I regularly travel between Calgary, Edmonton, Red Deer and Saskatoon and can meet at a mutually convenient midpoint. If any of those cities work for you I can arrange to meet there or somewhere in between along the route. Please suggest a location and time and I’ll do my best to accommodate.

categories:Sporting GoodsGuns

6972 impressions

407 views

Classic single-shot Ruger No.1 in .45-70 Government. Excellent overall condition. Mechanically tight, clean bore, and a crisp, predictable falling-block action. Shoots very well: accurate from bench or standing, with a smooth, light trigger and rock-solid lockup that makes it a reliable choice for big-game hunting or precision single-shot range work. Stock and metal finish are well cared for with only minor handling marks consistent with careful use. Comes as pictured (no accessories included). Notes for buyers: Buyer must comply with all provincial/federal firearms transfer laws and present a valid firearms licence. Please text or email for additional information/pictures. No Trades. Rifle is located in North Battleford. I regularly travel between Calgary, Edmonton, Red Deer and Saskatoon and can meet at a mutually convenient midpoint. If any of those cities work for you I can arrange to meet there or somewhere in between along the route. Please suggest a location and time and I’ll do my best to accommodate.

categories:Sporting GoodsGuns

6722 impressions

430 views

Ruger No1 in 30-06. Excellent condition. Bore and crown are pristine. A few scratches and dings on the stock from use. This one is a beauty to shoot and was my go to gun on the farm. Very accurate and indeed a must have for collectors of Ruger No 1's. This gun was made in 1990 according to the serial number. Comes with distressed leather sling and heavy duty uncle mikes sling swivels. The gun is currently located in North Battleford but I make frequent trips to Edmonton, Red Deer and Calgary area and can meet you in one of those locations. Will ship on buyer's dime. Please contact for more pictures. Serious inquiries only please.

categories:Sporting GoodsGuns

12810 impressions

1180 views

Howdy Townpost. This is a fine English pocket or coat pistol made by Hollis and Sheath company which is the precursor to Hollis and Sons or Isaac Hollis and Sons. Wallace and sheath became Hollis and Sons in 1861 when Isaac Brentnall Sheath left the company to immigrate to Canterbury, Australia and raised sheep and owned coal mines in an area that is now a suburb of Melbourne. His gun making days were behind him, he'd become an industrialist down undah. Sheath & Hollis co-founded the company in 1849 and Sheath stayed with the company until as previously stated, 1861. That dates this firearm between 1849 and 1861. This is a single shot side hammer lock percussion pistol. It's a screw-barrel meaning you unthread the barrel, fill the powder chamber and place a ball on top it. You then use the barrel itself and the threads to seat the ball inside of the breach. Then a percussion cap on the nipple, put it at half cock put it in your dapper overcoat and pull it out should you meet any Scallywags on your travels. The gun is mechanically excellent. The bore condition is very good, there is some minor shallow pitting but overall the rifling is very sharp and clean and shiny. The overall exterior condition of the metal and wood is in excellent shape the diamond checkering are sharp and defined. The powder chamber has only minor pitting as pictured and was cleaned out internally. For a defensive coat pistol, the sights are excellent and easy to pick up and with a rifled bore in good condition I expect this pistol could be fired very accurately. To shoot this gun I would use 3F powder. Both number 10 and 11 caps fit the nipple reasonably well. A 40 caliber lead ball would be ideal as a projectile but you could definitely use .375 caliber balls with a patch no problem in my opinion. I haven't tried it myself though. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:Sporting GoodsGuns

5144 impressions

172 views

Howdy Townpost! I have a unique one for you this time. You there sir or madam! You wouldn't want to travel these dangerous streets without some form of protection under your coat! Have a look at this and turn off barrel pistol with a switchblade bayonet for backup, made by Mr. Nock. You may need it should you encounter any rowdies! This is a single shot box lock percussion pistol. It's a screw-barrel meaning you unthread the barrel, fill the powder chamber and place a ball on top it. You then use the barrel itself and the threads to seat the ball inside of the breach. Then a percussion cap on the nipple, put it at half cock put it in your dapper overcoat and pull it out should you meet any Scallywags on your travels. In my opinion this is an early Samuel Nock made Circa 1840s pistol. Based on comparable examples I've seen and the style of Engraving and construction of the pistol this appears to be an early production Samuel Nock made pistol. Samuel Nock was the nephew and an apprentice of of the more famous Henry Nock. Samuel knock became a very skilled and renowned gun maker in his own right. Most of his guns would be marked S. Nock but some of his earlier stuff had only his last name. I suspect he was trying to trade on his more famous uncle's name at the time. Overall the pistol is in pretty good condition except for a small hairline crack in the frame (pictured). There is some moderate pitting in the bore however it looks worse in the photo than it actually is. This is a smooth bore pistol and is breech loading so the pitting shouldn't make it difficult to load or shoot. This pistol was intended for point blank range shooting by virtue of the fact that has a stubby little bayonet to use in case you missed your target. The pistol mechanically fine. The trigger and lockwork are all in good working order and the spring loaded bayonet mechanism works perfectly. They are often broken because of the small springs and the daily carry type use of these firearms. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:Sporting GoodsGuns

5243 impressions

147 views

Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.

categories:Sporting GoodsGuns

11651 impressions

520 views

Many Czech produced post-war Mausers were made with mostly late war and some newly produced parts. These were sold to various different militaries and on the commercial market many and of these were sold to the Israelis as well. The rifle features many late war stamped parts including the oversized winter trigger guard but does include a half size cleaning rod unlike the Kriegsmodell K98's produced by the Germans. It does not have a stock disk, as it just has a hole drilled in the butt cap for disassembly of the bolt. This particular example has a low serial number, but the serial number ranges are all over because of different contracts. The whole gun matches with the new forced match serial number. It has a scrubbed receiver, and has a beech wood stock and handguard in a nice brown color. The rifle bore is actually in very good shape, but there is some stubborn fouling stuck in there and I don't have a 32 Caliber cleaning brush to remove it but I'm sure if you use the proper brush it should come out pretty easy since it's not rust. Just shooting the rifle might even remove it. The muzzle crown is an excellent condition as pictured. The rifle does have minor some stock damage. It looks like a vice dent or some sort of hammering pattern, but it's only on the one side (pictured). Overall the gun is in very good original condition and the action is nice and smooth and it is unfired by me. This is a nice unique example of a k98 made by Brno, who is very well known for their quality produced firearms. The rifle is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. If you live in Alberta I do get around the province a fair bit throughout the year, so if I happen to be heading to your area maybe we can do a meet up along the way on my travels to save you the shipping costs. PAL will be verified as per C-71.

categories:Sporting GoodsGuns

9893 impressions

640 views

SAVAGE MODEL 99C SERIES A , CHAMBERED IN 308 WIN, CLEAN SHINY RIFLING, EXCELLENT BLUE, NO RUST OR PITTING , NO CRACKS ON WOOD ( SMALL CHIP AT BUTTPLATE TOE ( NOT A SHOOTING ISSUE. DETACHABLE MAGAZINE, ( ONE EXTRA MAG AVAILABLE FOR $150 IF PURCHASED WITH THE GUN ) LEATHER SLING, BUSHNELL CLEAR 3X9X40 SPORTSVIEW SCOPE WITH SEE TRU MOUNTS. SHIPPING IS $75 ANYWHERE IN CANADA. CONTACT RENÉ AT 514 713 2310 OR ADCRENE65@GMAIL.COM

categories:Sporting GoodsGuns

3967 impressions

283 views

The S8 wraps backwards over the barrel and makes the barrel look like a shorter barreled, suppressed firearm without doing either of those things. It is made out of a corrosion resistant stainless steel, nitrided black, for years of hard professional use. Although the linear compensator does not decrease the sound the firearm makes, it does direct that sound away from the shooter making the shooting experience a bit easier on the ears. The S8 compensator comes in 3 threading patterns: 1/2x28TPI (the .223 standard). 5/8x24TPI 1/2x36TPI The compensator requires a barrel diameter less than 1” with an unobstructed 2” of barrel behind the threads (before thing like gas blocks, front sight towers or bayonet lugs). If you have things like front sight posts that prevent a wrap around comp, consider the S9. The S9 was developed when customers running the ruger PC or the RDB couldn't use the S8 due to its wrap back design. The S9 is threaded in 1/2x28tpi Also shown is the S8 with a few barrel lengths combined with our HG handguards. WARNING: messages sent through townpost are not getting through. Please email me directly or text me directly.

categories:Sporting GoodsGuns

70115 impressions

3179 views

$150 Often Specter Arms gets asked for a good scope for a light rifle; a 22 or a 223. With the budget friendly X4 scope, people now have a inexpensive low power variable optic packed with a variety of useful features. Its compact size and weight don't add much in terms of bulk keeping your favorite plinker light and easy to carry. In fact the X4 measures only 9.1" long. Its 1-4 magnification is plenty to shoot out comfortably to 200 meters placing this optic as a viable contender as an entry level 3 gun scope. It uses 1" rings which makes its compatible with a lot of older rifles designed with only 1" rings in mind. Picatinny rings are included. Finally, an illuminated reticle gives a nice contrast when shooting at dark backgrounds or in low light. Caliber Max: 762x39, 223 Appropriate For: Wk180C, WS-MCR, Wk181, Ar-15, Su-16, tm-22, Crypto, Raven, Henry Homesteader, Ruger 10/22 _____________ Specter Arms is a dealer for Victoptics is the sub-brand of Vector Optics. SA has more in stock then just S6s and X4s; red dots, scopes and micro reflex sights are all available on the website. Send a text to 7809079585 for more info. If Canada post is not on strike, shipping is available at actual cost or pick up in SE Edmonton. Please click on my user name for other ads and shipping policies. WARNING: messages sent through townpost are not getting through. Please email me directly or text me directly.

categories:Sporting GoodsGuns

70287 impressions

2485 views

Winchester Model 1894 38-55, Ref #1040 Winchester lever action, sporting rifle, octagon barrel, full length magazine. Dated app. 1895. Comes with Winchester letter. Barrel is 26” long with sights intact. Bore shows black powder use. Bluing throughout at about 50%. Screws have seen use. Functionally everything seems very good, follower works, saety is good, hammer drops when trigger pulled. Issues:  Tang has been repaired and there is no firing pin, forend has a crack in it.  Only reasonable offers will be considered. No trades please.   Standard Disclaimer, some items may not apply.  The firearms and accessories I sell may be new or used, and are usually acquired through estate liquidations. I visually inspect them and check basic operation only, and share what I know or find in the description and photos. They are not live test fired. I provide full disclosure on what I find, but can not be held responsible for what I may miss.  It is your responsibility to have your  firearm inspected by a competant gunsmith before firing, shoot at your own risk. I am not a gunsmith. I do not warrantee these guns or any associated accessories, nor do I accept returns. They are, as is, where is, and all sales are final. On final purchase you have accepted full responsibility for the item. E-transfer or cash only. S/H & insurance are extra. Tracking number will be provided. I require your full name, PAL #, date of birth and email address for licence verification for firearms and ammuntion.  Thanks,  Darcy Darcy's Estate Liquidations

categories:Sporting Goods

849 impressions

88 views

DEPRIMED AND TUMBLED - About 20 or so were fired twice while developing a load.......offered for sale ( case-gards included ) as I no longer shoot 9mm.    I am willing to ship at buyer’s expense, or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery. ***   Please note that I will be attending the Edmonton Gun Show in Stoney Plain on Dec. 6th & 7th and would be able to deliver any completed purchases at the gun show ,  during show hours.   ***

categories:Sporting GoodsGuns

1211 impressions

66 views

Type : Shotgun Action : Single Shot Chamber : 2 3/4 Inches Choke : Full Barrel Lenght : 30 Inches Made in Canada Shoots very well Inv : 932 The delivery service made by Canada Post is available for purchase over 50$.  The delivery address must absolutely be the same as on the firearm license. A signature and an identity document will be requested at the reception at the post office. Before shipment, this information will be requested : Name Address PAL Number Date of birth Telephone number Email Address Two photos from a government identity card or a conference video that will prove the buyer's identity (RCMP regulations since 2022). The PAL will be checked and an RCMP reference number will be requested.

categories:Sporting GoodsGuns

3903 impressions

406 views

Type : Shotgun Action : Single Chamber : 2 3/4 Inches Choke : Full Barrel Lenght : 30 Inches Shoots very well * Small crack on the rear stock (solidity not affected) Inv : 934 The delivery service made by Canada Post is available for purchase over 50$.  The delivery address must absolutely be the same as on the firearm license. A signature and an identity document will be requested at the reception at the post office. Before shipment, this information will be requested : Name Address PAL Number Date of birth Telephone number Email Address Two photos from a government identity card or a conference video that will prove the buyer's identity (RCMP regulations since 2022). The PAL will be checked and an RCMP reference number will be requested.

categories:Sporting GoodsGuns

2383 impressions

380 views

Type : Rifle Action : Muzzle loader Barrel Lenght : 44 Inches Bayonet included * Does not shoot Inv : 1028 The delivery service with Canada Post is available for a fee of 50$.  The delivery address must absolutely be the same as on the firearm license. A signature and an identity document will be requested at the reception at the post office. Before shipment, this information will be requested : - Name - Address - PAL Number - Date of birth - Telephone number - Email Address Two photos from a government identity card or a conference video that will prove the buyer's identity (RCMP regulations since 2022). The PAL will be checked and an RCMP reference number will be requested.

categories:Sporting GoodsGuns

2307 impressions

375 views