Located in NW Edmonton. Framed Lithograph, measures 16 1/2” wide x 19” high. Price $675. Trading Ceremony at York Factory, 1780's By ADAM SHERIFF SCOTT, R.C.A. The arrival of the main body of Indians in the early summer was one of the important events of the year at the posts along the shores of Hudson Bay. Andrew Graham, who was at York Factory for several years, has left us an eye-witness account of the elaborate ceremony that preceded the trading at York when the Indian canoe fleet arrived from the West. After they had landed at the fort and had been duly received by the governor (as the local officer in charge was known), the chief and his lieutenant were dressed up in European clothes and then escorted to the chief's lodge with much pageantry. "In front are the halberts and ensigns," writes Graham, "next to the drummer beating a march; then several of the Factory Servants bearing the bread, and prunes, pipes, brandy, tobacco, and the beaver coats of the chief, which he had on when admitted into the Factory. Then comes the Captain [chief] walking quite erect and stately, smoaking his pipe and conversing with the Governor and his officers; then follow the Lieutenant and perhaps a friend or two who was permitted to come in with the Chief." In the picture, the chief, attired in scarlet, with one red stocking and one blue, is seen walking with the governor in all his finery. The walls of the fort, rising above the palisade, are of squared logs covered with plaster. The red ensign bears the Company's coat-of-arms in the fly. Price $675. Can ship once paid. Located in NW Edmonton. Available 7 days a week. Call or text me 780-803-7501

categories:Household ItemsCollectibles

1020 impressions

137 views

Flip open eyepiece scope cover and flip open objective scope cover Eyepiece cover fits 39.40mm #11 in chart Objective cover fits 46.20 mm #26 in chart Fits Leupold VX3-X40mm scope

categories:Sporting GoodsGuns

2457 impressions

97 views

Heym SR20N Sporting in 30-06 made by FRIEDRICH WILH HEYM Germany. Krupp special steel. It has a polished blue finish, a 24 inch sportier barrel with sights, rear sight flip down, jeweled bolt, gloss finish checkered walnut stock with a cheek piece and front/pistol grip rosewood tips, sling swivel studs, and a nice pad. Some handling/hunting marks. Quality German craftsmanship! Very good condition. Please call or text me before you send EMT!!!! Please send message,payment to: medal1958@gmail.com

categories:Sporting GoodsGuns

34623 impressions

3407 views

Will BUY GUNS!!   Will buy singles, parts guns, accessories, or collections. Located in southern Alberta, but will travel if required Will pay fair prices! 403 818-0864

categories:Sporting GoodsGuns

3901 impressions

269 views

I have some gun shirts still available that I have designed and sold in gun shows past, although it has become too cost prohibitive to travel to shows now, so I'm just looking to get my money back. They're 100% cotton and machine washable, just flip inside out and wash with cold water to protect the silkscreen. I have only a couple each in black, OD green and grey. Sizes are Large, XL, Medium and 2XL. Shirts are $20 each, with Canada wide shipping available at a flat rate of $17. PM me with your choice of shirt, size and color and I'll let you know what I've got left.

categories:Sporting Goods

19150 impressions

1065 views

Hey I have a nice shape beretta model a391 extrema 2 reciver.. finding a spare or replacement reciver is near impossible for this gun and i have a beautiful one for sale for a really fair price that would definitely help someone out.. these recivers are known to crack so dont miss out on your chance to get a spare or replacement

categories:Sporting GoodsGuns

559 impressions

63 views

FINE CROSSHAIR RETICLE, 1"TUBE, ALL ADJUSTMENTS WORKING, FAIRLY RARE MODEL WITH DENT IN OBJECTIVE BELL AND NUMEROUS MARKS BUT BRIGHT AND CLEAR,

categories:Sporting GoodsGuns

4419 impressions

160 views

Please read the whole ad! FREE to good home. She is almost 2 years old, born January 2024. She is an outdoor dog with lots of energy. She's good with kids, loves people. She is not spayed. We got her breed ID test done, and she is 45% German Shepherd, 18% Belgian Malinoise, 13% Alaskan Malamute, 13% Rottweiler, 11% Border Collie. She is a nice dog in lots of ways, but she is harrassing our cows, cats, chickens and rabbits, and would be best as the only animal. She's okay with our other dog (also a female, but submissive) but she does get a bit jealous and likes to be the boss of the doghouse, food, etc. Located near Sylvan Lake. Please call or text 4O3.392*9l7O for more information.

categories:Pets and AnimalsDogs

4991 impressions

296 views

Winchester Model 1876 (1882) - 45-75 Win, 26" Half Octagon Barrel, Half Magazine, Shotgun Butt Stock. Only 11 of all 1876 Rifles (Total = 61,399) were produced with the 26" Half Octagon Barrel, with a Half Magazine, and Shotgun Butt Plate Good Wood, Bore is Fair - Dark Spots Mechanically 100% Winchester Letters Available. $5,250.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:Sporting GoodsGuns

16378 impressions

468 views

Remington Model 742 308 win Carbine Woodsmaster.18.5 inch barrel with sights, Weaver flip to the side scope mount,4X Bunner/Bushnell scope, T-post reticle. Rifle is in good working condition. Good bore with strong rifling. Finish shows some handling marks, like usual hunting rifle this age. Good solid wood furniture. -$750.00 Local is preferred, but will ship at buyers expense. Further Lost insurance can be purchased by the buyer. Valid Pal a Must and will be verified for reference number. Please send message to: medal1958@gmail.com

categories:Sporting GoodsGuns

13049 impressions

1525 views

Tikka 512S Combo 12ga/222 rem.Left hand. 24 1/2” barrel 12GA with screw in MOD. choke and 2 3/4 inch chamber,23 inch 222 Rem. barrel with Flash, select single trigger. Rear sight flip down. Receiver factory grooved 11MM for scope rings.Bores are excellent being bright and shiny and sharp pronounced rifling in the .222 rem. barrel.There are some dings & bruises on the stock & forestock. Local is preferred, but will ship at buyers expense. Valid Pal a Must.Please send message to: medal1958@gmail.com

categories:Sporting GoodsGuns

37099 impressions

3146 views

Weatherby Athena D'Italia Grade IV 12 Gauge O/U Shotgun.28 inch barrels, 3 inch chamber, ejectors, single select trigger, four-lock boxlock action with chrome plated side plates with gold game bird scenes, SST (tang operated). LOP professionally altered to 15 inch. Come with original Weatherby case and 3-Weatheby screw in choke tubes. Trigger guard features Weatherby flying "W" Mfg. by Fausti .Very good condition. Please call me or text,before you send EMT!!!! Please send message,payment to: medal1958@gmail.com Shipping on buyers dime.

categories:Sporting GoodsGuns

51522 impressions

4911 views

Selling a rare and hard to find Aimpoint comp m2. 4moa dot. NV compatible. Has rubber cover and Aimpoint flip caps. Glass is mint. Excellent shape for its age. This would be awesome for a collector. Also comes with 2 extra 30mm mount's. Price is $750 Pick up Toronto/GTA. Mississauga area. Will consider trade for new Holosun aems green dot larger optic

categories:Sporting GoodsGuns

3104 impressions

168 views

Howdy Townpost. I've got a number of these brand new Allen slings for sale. The slings I have here are an improvement over the regular Allen Endura. This batch of slings has cam buckles (sometimes called toggle clips) instead of tri-glides. They're easier to use and make attaching the webbing loops to sling swivels really quick and easy. The sling loop sections are longer and could even be used as a carry strap for small logs or something heavy in a pinch. The slings can be adjusted from 28" to 52" so they're quite versatile. The slings are $10 each. I'm currently offering a buy 3 get 1 free deal. The slings are located in SW Calgary and can be picked up almost anytime. I am also happy to ship nationwide, this is of course at the buyer's expense. Shipping these as regular or expedited parcels should be fairly cheap since I can roll up the sling into a little roll and put it into a very small box or mailer. I may be able to ship this as an oversized lettermail if I fold one or two slings flat and get them into a large envelope too. So I expect shipping to be $5-19 depending on what option you go with, where the is the package destination and how many slings you want.

categories:Sporting GoodsGuns

16684 impressions

447 views

Howdy Townpost. This is a nice little and fair conditioned pocket tip-up revolver, in .30 Rimfire. In the 19th century, XXX was used denote very strong malt liquor. So I think marlin was trying to market in the name that this is a stout little gun. Similarly done by Hopkins & Allen with the naming of their "XL" series of pocket revolvers. These were made by Marlin from 1873-1887 with a total of roughly 26,000 being made. They are essentially copies of the Smith and Wesson Model 1 1/2's and 2's. The mechanical condition of this firearm is excellent. The hammer and cylinder function reliably and as intended. Timing and lock up are excellent. The barrel is tight on the frame. This revolver was tuned by my gunsmith too. The bore is worn but there's some life left in it. There's frosting at the front of the cylinder and the forcing cone. The nickel is mostly present on the frame and the beautiful original rosewood grips are in excellent shape. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:Sporting GoodsGuns

12364 impressions

435 views

Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.

categories:Sporting GoodsGuns

19834 impressions

730 views

Howdy Townpost. I have a really interesting piece for you here. This is a conversion of a conversion rifle. This is a German made Ludwig Loewe Gew 88 that was later converted by the Germans into a Gew 88/05 and most likely given to the Ottomans in WWI as war aid. Many of these were retained and later converted in the 1930's to a Mauser 1935 pattern type rifle. They converted a large portion of their arsenal to this pattern including SMLE's a plethora of their different Mausers, and Gew 88's they had in inventory. This rifle was rebarreled to shoot the modern 8mm Mauser cartridge and re-stocked into a more Mauser-esq stock. This stock features Mauser bolt disassembly disks despite them not being required for the Gew 88 action. The stock on this particular example had a fairly large wood defect that the Turks neglected to address has been fixed. It was cleaned out and filled with Brownells Acraglas epoxy so it's rock solid now. The overall condition is good. The stock was professionally refinished. The bore is excellent, very sharp and clean rifling. The rifle is located in Calgary AB for pickup or I can ship it nationwide on the buyer's dime. PAL will be verified as per C-71

categories:Sporting GoodsGuns

7874 impressions

579 views

Howdy Townpost. I have here a nicely restored Cooey Model 82. I got the gun as an oil stained and sporterized target .22. It's had the stock nicely refinished in a satin urethane finish done in the fashion to mimic an old oil finished stock. The stock has a pretty nice grain pattern on the underside of it (pictured). The bore is excellent. The stock had a chunk out of it to accomodate a Lyman peep-sight and the receiver was drilled and tapped for it as well. That has all been repaired (pictured) and is hardly noticeable now. There was a hairline crack near the middle barrel band that was filled too. It probably wasn't necessary to fill especially on a .22 , but hey she's been filled. It has all the C-broad arrow markings present. The rifle is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. If you live in Alberta I do get around the province a fair bit throughout the year, so if I happen to be heading to your area maybe we can do a meet up along the way on my travels to save you the shipping costs. PAL will be verified as per C-71.

categories:Sporting GoodsGuns

16718 impressions

635 views

Howdy Townpost. I've a neat old single shot 12 gauge made by Savage. It has a nice and light tenite stock that was sanded at one point to give it a matte finish. The shotgun is very tight and not off the face at all. The gun is very light and handy sitting 5.73lbs. It has a 12 gauge 2 3/4in, 28in full choke barrel. The patent number is molded into the plastic stock interestingly enough. The black paint on the trigger guard is flaking of a little. The shotgun is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. It's pretty short when broken down, and is light so it should be relatively inexpensive to ship. If you live in Alberta I do get around the province a fair bit throughout the year, so if I happen to be heading to your area maybe we can do a meet up along the way on my travels to save you the shipping costs. PAL will be verified as per C-71.

categories:Sporting GoodsGuns

14032 impressions

682 views

Many Czech produced post-war Mausers were made with mostly late war and some newly produced parts. These were sold to various different militaries and on the commercial market many and of these were sold to the Israelis as well. The rifle features many late war stamped parts including the oversized winter trigger guard but does include a half size cleaning rod unlike the Kriegsmodell K98's produced by the Germans. It does not have a stock disk, as it just has a hole drilled in the butt cap for disassembly of the bolt. This particular example has a low serial number, but the serial number ranges are all over because of different contracts. The whole gun matches with the new forced match serial number. It has a scrubbed receiver, and has a beech wood stock and handguard in a nice brown color. The rifle bore is actually in very good shape, but there is some stubborn fouling stuck in there and I don't have a 32 Caliber cleaning brush to remove it but I'm sure if you use the proper brush it should come out pretty easy since it's not rust. Just shooting the rifle might even remove it. The muzzle crown is an excellent condition as pictured. The rifle does have minor some stock damage. It looks like a vice dent or some sort of hammering pattern, but it's only on the one side (pictured). Overall the gun is in very good original condition and the action is nice and smooth and it is unfired by me. This is a nice unique example of a k98 made by Brno, who is very well known for their quality produced firearms. The rifle is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. If you live in Alberta I do get around the province a fair bit throughout the year, so if I happen to be heading to your area maybe we can do a meet up along the way on my travels to save you the shipping costs. PAL will be verified as per C-71.

categories:Sporting GoodsGuns

15996 impressions

958 views

WINCHESTER Model 2200 – 12ga x 2.75″ Shotgun 30 inch barrel Fixed FULL Choke Fair to good condition – Working perfectly – fully tested and cleaned. Bright clean bore. The wood has sun/UV damage to finish and barrel has some minor light rust spots and finish wear. MADE IN CANADA EH !

categories:Sporting GoodsGuns

4059 impressions

190 views