J. Stevens Model Springfield 85 semi-auto rifle in .22 Short, Long or Long Rifle Cal. Long Rifle Only as Automatic. This model has the ability to fire semi-auto with the bolt handle pulled out, or single shot with the handle pushed in. It has a 24 inch barrel adjustable, a blade front sight and an adjustable elevator notch middle sight. The hard wood stock is a smooth grip with a black fore end and black ribbed buttpad, . It has a sharp/ clean bore and is in excellent working order. Period correct Weaver 4X scope, with sling. Comes with one magazine. $475.00

categories:Sporting Goods

5802 impressions

818 views

SWISS SCHMIDT RUBIN, MODEL: 1896/11 INFANTRY RIFLE, CALIBER: 7.5 X 55 Very good original condition 1911-1920 conversion date to M191 action.. SWISS SCHMIDT RUBIN, MODEL: 1896/11 INFANTRY RIFLE, CALIBER: 7.5 X 55, COMES WITH MUZZLE COVER, BORE IS VERY GOOD. VISIBLE NUMBERS MATCH. BARLEY CORN FRONT SIGHT WITH RAMP, ADJUSTABLE U NOTCHED REAR SIGHT, SILVER BOLT WITH RED POLYMER BOLT KNOBS. TWO PIECE FULL MILITARY WOOD STOCKS, FINGER GROOVED FOREND, MILITARY MODIFIED PISTOL GRIP, SMOOTH STEEL BUTT PLATE, SLING SWIVELS, STACKING HOOK, BAYONET LUG. METAL FINISH TURNING SILVER GREY WITH LIGHT PITTING, SCRATCHES, HANDLING MARKS AND WEAR. STOCKS SHOW DINGS, MARKS AND WEAR. ACTION: STRAIGHT PULL RIFLE, BARREL LENGTH: 30.75", CLASS: CANADIAN NON RESTRICTED. The Schmidt–Rubin rifles were a series of Swiss Army service rifles in use between 1889 and 1958. They are distinguished by the straight-pull bolt action invented by Rudolf Schmidt and use Eduard Rubin's GP90 7.5×53.5 and GP11 7.5×55 Schmidt–Rubin rifle cartridge. The Schmidt–Rubin 1896/11 rifle, or the Model 96/11, was a Swiss upgrade to the 89/96 rifles they had, to use the more powerful cartridge adopted as the GP11. The GP11 cartridge operated at a higher chamber pressure, which the 89/96 action could easily handle. The model 89/96 rifles were modernized by changing the three-groove rifled barrel to a new 4-groove type, adding a pistol grip to the stock, changing the magazine to the 6-round type used in the 1900 short rifle, and modernizing the sights. This also streamlined the appearance of the rifles. Because more rifles were needed than were available, the model 1911 rifle, with slight changes, was put into production. Almost all of the 127,000-plus model 89/96 rifles were converted to the 96/11 specifications. An improvement over the original 1889 version of the Schmidt–Rubin rifle, the Swiss M1911 placed the locking lugs in the middle of the bolt, rather than at the rear, strengthening the action and allowing a more powerful cartridge, the Gewehrpatrone 11 or GP 11 to be used. It is distinguished from the 96/11 rifle by a curved butt plate and by a stock with an integral semi-pistol grip. It uses a graduated tangent sight which begins at 300 meters. The 1911 and 96/11 rifles were made with excellent craftsmanship, and were exceptionally accurate. As Switzerland remained neutral through both world wars, remaining rifles are typically in far better condition than other European rifles of the time. CFP/RCMP courtesy of Bill C-71 require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Sections 99 & 101 of the Criminal code.

categories:Sporting GoodsGuns

28220 impressions

1224 views

SWISS SCHMIDT RUBIN K11 MODEL: 1911 Action CARBINE CALIBER: 7.5 X 55, COMES WITH MAGAZINE, BORE IS VERY GOOD, SHINY. MADE IN 1931, VISIBLE NUMBERS MATCH. BLADE FRONT SIGHT WITH EARS, ADJUSTABLE U NOTCHED REAR SIGHT, BROWN POLYMER BOLT KNOBS, SILVER BOLT. TWO PIECE FULL MILITARY WOOD STOCKS, FINGER GROOVED FOREND, PISTOL GRIP, SMOOTH STEEL BUTT PLATE, SWIVELS WITH METAL HOOK FROM SLING ON ONE OF THEM, STACKING HOOK, BAYONET LUG. METAL FINISH SHOWS SOME NORMAL SCRATCHES, HANDLING MARKS AND WEAR. STOCKS SHOW SOME NORMAL SMALL MARKS, SCRATCHES AND WEAR. ACTION: STRAIGHT PULL RIFLE, BARREL LENGTH: 23.25" CLASS: CANADIAN NON RESTRICTED. Excellent Overall Condition An improvement over the original 1889 version of the Schmidt–Rubin rifle, the Swiss M1911 placed the locking lugs in the middle of the bolt, rather than at the rear, strengthening the action and allowing a more powerful cartridge, the Gewehrpatrone 11 or GP 11 to be used. It is distinguished from the 96/11 rifle by a curved butt plate and by a stock with an integral semi-pistol grip. It uses a graduated tangent sight which begins at 300 meters. The 1911 and 96/11 rifles were made with excellent craftsmanship, and were exceptionally accurate. As Switzerland remained neutral through both world wars, remaining rifles are typically in far better condition than other European rifles of the time. CFP/RCMP courtesy of Bill C-71 require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Sections 99 & 101 of the Criminal code.

categories:Sporting GoodsGuns

30218 impressions

1279 views

Brand new The Mini-Clip 2.0 was better than the original but the opportunity presented itself to go further using new highly efficient mold/manufacturing partners right here in Texas. The Mini-Clip 2.0 Flex has the flexibility to accommodate a wider range of short shell lengths, should Aguila ever want to make an even shorter (or longer) Minishell. Re-loaders were very interested in this accommodation as are buyers of Exotic Products Shorty shells in varying lengths. The 2.0 Flex will feed all but the longest in their line, the 3 Buck. Allows use of 12ga 1.75” Birdshot, Buckshot, and Slug shells                  Fits: 12ga Mossberg 500, 590, 590A1, and Maverick 88 models Use with Aguila Birdshot, Buckshot and Slug offerings in Mossberg 12ga 500, 590 and Maverick 88 models Easily installs and uninstalls in seconds to allow use of 1.75", 2.75" or 3" shells as desired by user Practice with less expensive Aguila birdshot as the recoil response vs. Aguila buckshot is slight Low recoil of buckshot allows for safe, easy and comfortable aiming and discharge with pistol grip configurations (with proper grip/face clearance, of course). Not confined to hip and laser shooting Mini-Clip stays in well, but may want to tape in with electrical or Gorilla tape for close contact or heavy foliage environment applications

categories:Sporting GoodsGuns

7955 impressions

495 views

PLEASE READ CAREFULLY: You must obtain a letter of exemption from the CFO of your province in order to buy a handgun in Canada as of October 21, 2022. - SMITH & WESSON Model 2206 /22 lr caliber has a solid stainless steel frame, ss slide and barrel - MINT CONDITION /like new in original box / A TRULY SUPERB TARGET PISTOL! - 6 inch /152mm long barrel with Target-Crowned Muzzle - The barrel is milled into the bottom of the pistol's frame, giving it an EXTREMELY low bore axis, thus, creating virtually no muzzle-rise with each shot fired - Very light, short and crisp trigger pull with adjustable over-travel set-screw behind the trigger - Barrel and front sight do not move when the slide reciprocates, making it very accurate with fast follow-up shots - Fully adjustable rear sight for windage and elevation with LONG sight radius, for better accuracy - 4 (10 rnd) steel, extremely reliable S&W magazines - Takedown tool, Rear sight adjustment S&W screwdriver - Spare extractor, springs and retainer pin (included) from the factory - Instruction Manual - Weight 39 oz /1106 g unloaded UPGRADES: 1- Trigger Job by Gunsmith to lighten the trigger pull 2- Professionally dehorned edges by Gunsmith (all sharp edges have been slightly rounded) 3- Modified 1/8 inch grip inserts (installed) to improve the overall grip and feel 4- Stainless steel allen head GRIP screws (lengthened & installed) 5- Grip tape (installed) Note: Serial Number has been blacked out in all photos

categories:Guns

34078 impressions

3429 views

PLEASE READ CAREFULLY: You must obtain a letter of exemption from the CFO of your province in order to buy a handgun in Canada as of October 21, 2022. - Smith & Wesson 'MASTER' Model 52-2 (38 special wadcutter) Target/Competition pistol - Beautifully engineered and crafted For COLLECTION and TARGET SHOOTING - All parts are carefully hand-fitted to extremely high tolerances at the S&W Performance Center, USA - Date and place of Manufacturing of this pistol: Oct.19,1991, Springfield, Mass. USA - Extremely RARE /Never seen BRAND NEW 'PRISTINE' in original box, (NEVER FIRED!!) - 5 inch /127mm barrel with integrally milled lock-up bushing as part of the muzzle for SUPER ACCURACY - Semi-auto, Single action trigger, manufactured with an IMPROVED EXTRACTOR compared to the original (model 52) - Truly Excellent, fully adjustable rear sights - Hammer-block safety /slide-mounted (when engaged, the hammer-block safety rotates the firing pin so that it is not in line with the hammer when dry-firing. - Astonishingly-short, crisp, light TRIGGER PULL and reset! - Solid wood, aggressively checkered panel-style S&W grips - Highly POLISHED feed ramp. - Beautifully blued high-gloss finish on slide and frame. - Cleaning and takedown tools,...still in SEALED plastic bag. - Two (5 round) S&W 38 special wadcutter steel magazines - Owner's manual. - Weight 40 oz / 1134 g unloaded Note: Serial number has been blacked out in all photos.

categories:Guns

26556 impressions

2946 views

Winchester model 101 Diamond Grade Trap with 2 barrels set.30" O/U ported barrel with vent rib, top bbl fixed Mod/bottom barrel has screw in Winchoke. Single 34" barrel with high trap target ventilated rib and screw in Winchoke. Fully engraved nickel receiver, checkered walnut forearm, pistol grip adjustable comb stock, Gun locks up tight and has bright bores, wood still solid, with no cracks, some minor handling marks, as usual. All Barrels market " Winchester Diamond Garde" Trap -"East Alton.IL.USA".Gun still in a very good condition. M/F DG477XXX.Come with four chokes and case. Local is preferred, but will ship at buyers expense.Further Lost insurance can be purchased by the buyer. Valid Pal a Must. Please send message to: medal1958@gmail.com

categories:Sporting GoodsGuns

55780 impressions

5451 views

Winchester Model 21 Heavy Duck 12 Gauge 3 Inch Magnum. 30 inch double bore with bright shiny tubes. Modified and full fixed chokes. Single selective trigger, auto ejectors. Gun appears to be all original finish and blue with all matching serial #298XX's. The gun has original solid rib, metal bead front and middle sights, 3" Magnum chamber, pistol grip, beavertail forearm, high figure wood, auto safety, ejectors, single trigger with barrel selector. Recoil pad a bit dry. There are some handling marks on the stock and forearm. The checkering is really nice. The guns condition is just excellent for its age.Pal is a must. No trades. Thanks. Call or email only,as I don't use townpost messager. Please call me or text,before you send EMT!!!! Please send message,payment to: medal1958@gmail.com

categories:Sporting GoodsGuns

31243 impressions

2812 views

Italian made Tikka model 512S Combo 12 GA./308 Win. Caliber.20" barrels with sights,3 inch chamber, black engraved receiver, checkered pistol grip walnut stock, single select trigger and tang safety. Brand new, unfired. M/F Marocchi/Sako. Please call or text me before you send EMT!!!! Please send message,payment to: medal1958@gmail.com

categories:Sporting GoodsGuns

71219 impressions

6219 views

Eibar Armas EGO Model JANCNES CROMADOS Sidelock 12 GA. SxS Shotgun,28" barel,fixed MOD/IC.,2 3/4-3"(76MM) chamber, Fully engraved nickel receiver,Holland and Holland style sidelock action, Filed concave rib, Articulated double triggers, Automatic ejectors, Automatic safety,Splinter forearm with Anson & Deeley pushbutton latch, Highly figured exhibition grade straight grip stock w/ Pachmayr 1" Decelerator Rubber Recoil Pad, Splinter forearm with Anson & Deeley pushbutton latch,L.O.P.: 14 1/2", Weight: 6 lb. 15 oz.All numbers matched.Some handling/hunting marks. Good condition. Made in Eibar, Spain.Local is preferred, but will ship at buyers expense. Valid Pal a Must. Please send message to: medal1958@gmail.com

categories:Sporting GoodsGuns

21396 impressions

2205 views

Very rare Remington model 1875 SAA in 44 Remington caliber. This revolver still retains about 75% of the original nickel two piece wood grips show typical ware but no chips or cracks. The action is very crisp and functions correctly with excellent timing and lock up., the bore shows typical black powder pitting, but lots of strong visible rifling This is an antique and you do not require a PAL to purchase this firearm. RCMP, FRT document included.

categories:Sporting GoodsGuns

53676 impressions

3631 views

Extremely rare Smith & Wesson double action favourite model.  approximately 1000 of these produced this one was sent to Berlin in 1887. This revolver still retains over 90% of the original nickel finish comes with a very nice set of pearl grips, the action functions perfect both in single and double action with excellent lock up and timing. Don’t miss an opportunity to own this extremely rare Smith & Wesson Antique. It comes with the RCMP, FRT document and the Smith & Wesson history letter. 

categories:Sporting GoodsGuns

8274 impressions

452 views

Smith & Wesson new model double action no 3 .This revolver still retains about 75% of the original nickel finish comes with a very nice set of pearl grips showing a little bit of were but no chips or cracks. The action functions very well in single or double action with good timing and lock up  still  lots of strong visible rifle but minor typical black powder pitting, it has a 6 inch barrel chambered in 44 Russian caliber  as well as a long cylinder , 1-9/16” This is an  revolver and you do not require PAL to purchase it. RCMP, FRT documents included.

categories:Sporting GoodsGuns

9113 impressions

490 views

**Still available if posted** Please include phone # and your email with communications as messaging replies don’t always get through. For quickest replies use text, use TownPost messaging with TownPost account or request my email. I have a brand new Sako 85 Finnlight II Rifle, 30-06 SPRG, in a Cerakote Tungsten treated stainless steel action with an elastomer grip/black composite stock. It’s got a 22.4” fluted barrel, adjustable trigger (2-4lbs), 5rd magazine, and adjustable cheekpiece. SAKO Model #SBW3114A1930B4 I am the first owner of this brand new rifle but have not fired the rifle. **SEE MY OTHER RIFLE, RIFLE/SCOPE COMBO, SHOOTING AND HUNTING GEAR ADS** Valid PAL required, will come with transfer # as per new laws. First Paid, First Served.
 Holds only with deposit. Delivery Negotiable.
 Buyer pays for shipping costs and makes arrangements for payment. DESCRIPTION Building on the famous Finnlight name, the Sako 85 Finnlight II is an icon reborn. The lightweight RTM fiberglass stock makes the rifle light to carry and the barrel has been treated with a weather resistant Cerakote® coating, which makes this rifle the perfect choice for all conditions. The fully adjustable cheek piece also makes the rifle perfectly customizable for your preferences. SPECIAL FEATURES * HIGH QUALITY RTM FIBERGLASS STOCK 
The composite stock is manufactured with aerospace grade RTM technology. All Finnlight II stocks have carbon fiber bedding to ensure maximum accuracy and stability in all temperatures.
 * BARRELED ACTION 
Cerakote® treated stainless steel action for maximum weather resistance.
 * SECURE GRIP 
The grip surfaces and the cheek piece are made from robust elastomer.
 * ADJUSTABLE CHEEK PIECE 
Maximum precision and unique comfort for each shot. STANDARD FEATURES * ACTION 
Sako 85 actions come in six different sizes (CSA), providing reliable functioning for each caliber. All Sako 85 models feature controlled cartridge feed (RCS) to eliminate double feed or cartridge jams. The turn-bolt handle places the hand in a natural position during bolt operation, which allows for rapid repeated firing.
 * BARREL 
Sako 85 barrels are manufactured with a passion for craftsmanship and the very best knowledge of Sako. Barrel blanks are drilled, honed, cold- hammer forged, finished and finally individually inspected by an optical fine-tuning instrument: the human eye. Twist rates are chosen for each caliber to optimize accuracy and bullet performance. Sako 85 barrels, blued or stainless, have a non-reflecting, satin-like surface – with the exception of the Sako 85 Deluxe and Safari models that have a highly polished finish.
 * MAGAZINE 
The staggered, two-row magazine of the Sako 85 is made of stainless steel. The detachable magazine can also be loaded through the ejection port. The Total Control Latch (patent pending) of the Sako 85 prevents accidental magazine release.
 * SAFETY 
The special two-way Sako safety locks both the trigger and the bolt handle. The unique bolt release button of the Sako Safety System allows you to load or remove a cartridge from the chamber while the safety is engaged.
 * SIGHTS 
Most of the Sako 85 models with a blued finish on the barrel are available with either standard or optional adjustable iron sights. The front bead is adjustable in elevation and the rear blade in windage.
 * STOCK 
The ergonomics of Sako 85’s walnut and synthetic stocks are built for an optimal shooting posture. The excellent balance and smooth bolt operation of Sako 85 rifles enable fast, straight and accurate operation.
 * TRIGGER 
The weight of pull of the single- stage Sako 85 trigger unit is adjustable from 1 to 2 kg (2–4 lbs). An optional single-set trigger is available for most Sako 85 models. All Sako 85 rifles have an extremely durable, all-steel trigger guard that protects the trigger. An exception to this are the Finnlight and Carbonlight models, which have a lightweight hard-anodized aluminium trigger guard. SPECIFICATIONS MPN - SBW3114A1930B4 Caliber - 30-06 Sprg Receiver Size - M Handedness - Right Weight - 2.8 kg / 6.17 lbs Total Length - 1090 mm / 42.9 in Barrel Length - 570 mm / 22.4 in Rate of Twist - 1:11" Magazine - Detachable Magazine Capacity - 5 + 1 Trigger - Single Stage Trigger Stock Material - Composite Stock Finish - Black Material - Cerakote Tungsten Muzzle Thread - No Cheek Piece - Adjustable Open Sights - No

categories:Sporting GoodsGuns

26851 impressions

828 views

**Still available if posted** Please include phone # and your email with communications as messaging replies don’t always get through. For quickest replies use text, use TownPost messaging with TownPost account or request my email. I have a brand new Browning X-Bolt Target McMillan A3-5 Ambush Rifle in 6.5 Creedmoor for sale. It’s a precision bolt-action target rifle in a Carbon Fiber McMillan A3-5 stock w/adjustable comb and with a stainless steel 26" fluted bull barrel with muzzle brake. Featured in Urban Carbon Ambush camouflage it’s got an 60 degrees bolt throw with an extended bolt handle, an adjustable feather trigger, 4 rd detachable clip, Pachmayr Decelerator recoil pad, 20 MOA Picatinny optics rail and bipod rail. I am the first owner of this new rifle but have not fired the rifle. **SEE MY OTHER RIFLE, RIFLE/SCOPE COMBO, SHOOTING AND HUNTING GEAR ADS** Valid PAL required, will come with transfer # as per new laws. First Paid, First Served. 
Holds only with deposit. Delivery Negotiable.
 Buyer pays for shipping costs and makes arrangements for payment. DESCRIPTION Browning X-Bolt Target McMillan A3-5 Ambush Rifle, 6.5 Creedmoor. Made to the high standards you expect from Browning, this quality X-Bolt Target McMillan A3-5 Ambush Rifle is chambered in 6.5 Creedmoor and comes equiped with numerous features. These features include the Carbon Fiber McMillan A3-5 stock with an ajustable comb, a free-floating fluted barrel with a muzzle brake on 5/8-24 suppressor threads, picatinny rail for bipod mounting, a gray stainless steel 26" bull barrel, an adjustable feather trigger, detachable rotary magazine, a urban carbon ambush finish and more. Included with this bolt action rifle is two quick detach swivel cups, a 20 MOA picatinny rail, and a glass bedded receiver with a matte blued finish. The McMillan A3-5 stocks are US Marine proven tough, and are proudly featured on these X-Bolt models. PRODUCT FEATURES - Carbon Fiber McMillan A3-5 Stock Marine proven tough, this premium Carbon Fiber stock comes with an installed adjustable comb, textured gripping surfaces, palm swell, a Pachmayr Decelerator recoil pad, and finished in an Urban Carbon Ambush. This stock is a variation of McMillan's famous A-3 stock but with the addition of an A-5 type butt hook on the bottom of the butt. The flat on the bottom of the hook is about 3/4" wide. This stock comes with a thumbwheel elevator system which allows for precise vertical adjustments. With the adjustable comb you can adjust and align your sight plane to match the scope - Decked out 26" Long Bull Barrel Manufactured from gray stainless steel, this free-floating fluted barrel includes a muzzle brake on 5/8-24 suppressor threads, a thread protector, and an embedded target crown - Extended Bolt Handle, Feather Trigger, and 20 MOA Picatinny Rail This ambush rifle includes a steel constructed, glass bedded receiver that features a matte blued finish, a 60 degrees bolt lift with an extended bolt handle, an adjustable feather trigger, detachable rotary magazine, top tang safety, and bolt unlock button. The X-Bolt's three-lever gold plated Feather Trigger provides a clean, crisp pull with no take-up or creep and minimal overtravel. Attaching the ideal scope or accessory is easy with the aluminum manufactured 20 MOA Picatinny rail as well attaching a bipod or light to the included bottom rail SPECIFICATIONS Model Code - 035451282 Action Length - Short Action Barrel Length - 26" Overall Length - 46" Length of Pull - 13 5/8" Weight - 10 lbs 0 oz Magazine Capacity - 4 Twist Rate - 7" Barrel Finish - Satin Gray Stock Finish - Urban Carbon Ambush Receiver Finish - Matte Blued Chamber Finish - Polished Barrel Material - Stainless Barrel Contour - Bull Stock Material - Carbon Fiber Recoil Pad - Pachmayr Decelerator Checkering - Textured Grip Panels Sling Swivel Studs - 2 QD Cups Receiver Material - Steel Trigger Finish - Gold Plated Bolt Slide Finish - High Gloss Magazine Type - Detachable Trigger Material - Alloy

categories:Sporting GoodsGuns

22143 impressions

845 views

Howdy Townpost. This is a nice little and fair conditioned pocket tip-up revolver, in .30 Rimfire. In the 19th century, XXX was used denote very strong malt liquor. So I think marlin was trying to market in the name that this is a stout little gun. Similarly done by Hopkins & Allen with the naming of their "XL" series of pocket revolvers. These were made by Marlin from 1873-1887 with a total of roughly 26,000 being made. They are essentially copies of the Smith and Wesson Model 1 1/2's and 2's. The mechanical condition of this firearm is excellent. The hammer and cylinder function reliably and as intended. Timing and lock up are excellent. The barrel is tight on the frame. This revolver was tuned by my gunsmith too. The bore is worn but there's some life left in it. There's frosting at the front of the cylinder and the forcing cone. The nickel is mostly present on the frame and the beautiful original rosewood grips are in excellent shape. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:Sporting GoodsGuns

12400 impressions

437 views

Howdy Townpost! I've got a nice little uncommon and good condition subcompact Remington for sale now! This started its life as a Remington Model 1865 New Model Police as a cap and ball percussion revolver in .36 caliber. Many of these were never percussion guns as they existed in a weird transition period. And Remington made some of them from the ground up as cartridge guns. This one most likely was in inventory as a percussion revolver and was turned into a .38 rimfire cartridge revolver based on the serial number, in my opinion. These are one of the more rare and lesser known Remington cap and ball guns that were made. Remington only made 18,000 between 1865 and 1873. So they are relatively uncommon and scarce gun today. This is actually my personal favorite model of Remington percussion revolver they're a very handy subcompact-sized gun by today's standards they're bigger and much more comfortable in the hand in the grip than the pocket models but nice and light unlike the full size military .44s and they point very naturally. This particular example is in very good condition the nickel is a very high percentage of coverage some of the original silver plate is still visible on the trigger guard and some of the low areas. The color case hardening is still very colorful and defined on the hammer (pictured). The grips have been refinished but they are the originals. The wood grain is very interesting and beautiful in my opinion. The bore is in excellent condition especially for a Civil War era black powder firearm. This was likely carried in a police officer's holster and not fired much. It was well taken care of and the clean and good condition bore and chambres are reflection of that. The the mechanical function of this firearm is excellent as well. When I got the firearm it was actually in amazing condition to begin with and the mechanical function was perfect. It locks up and times perfectly. The hammer and the trigger pull are very crisp, light and smooth. And didn't require any adjustment, Remington did the job and they did it right the first time. The entire revolver has been taken apart and given a gunsmith's cleaning and was reassembled and lightly oiled. I came across a nice little Hunter leather holster at a gun show and found that it fit this gun very well so it's included as a freebie with the gun (pictured). The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:Sporting GoodsGuns

11619 impressions

667 views

Howdy Townpost! I've got an Italian jewel for you to take a look at here. This is an Italian Bodeo model 1889. These guns are among my favorite antique revolvers. They are a very simple rugged and easy to maintain and repair Military revolvers with one of the coolest safety/loading systems as part of its design. These revolvers are very well designed, and feature the safety, loading/unloading system called the "Abadie System". This system was designed in Portugal, but many European late 19th century designs incorporated it. This particular example is an 1897 production by Glisenti at Brescia. Glisenti made Bodeos from 1891 to 1906. This is considered a tipo (type) A or an enlisted model. The type A had a folding trigger which was considered safer and was issued to enlisted men and the type B was the officer's model and had a trigger guard. This particular gun is considered a late model because it has an internal hammer block safety, which is dovetailed into the hand (pictured). The early model had a external hammer block safety that was prone to breakage. I've personally seen multiple antique examples with broken external hammer block safeties. So it was a good move from a design standpoint to change. The early models also were finished in the white in a similar manner to the French model 1873 Chamelot-Delvignes were. This example is of course blued like the overwhelming majority of the late models. This revolver is in excellent condition mechanically and has minimal wear overall. The grips are in excellent condition and we're refinished professionally. The chambres and bore are in excellent & minty condition as well. And the bore itself is one of the best I've ever seen on a Bodeo, with clean, sharp and shiny lands and grooves. This revolver chambres the 10.35mm Italian ordinance cartridge. This cartridge is very similar to .44 Russian but has a smaller diameter bullet (.422) and a slightly tapered chambre. I have seen these shot with .44-40 bullets that are .427 in diameter. These revolvers were loaded with smokeless from the get-go in 1890 using ballastite, a smokeless propellant. For an additional fee on top of the price I can have the chambres slightly reamed so that they will accept .44 Russian cartridges. That way you can buy an off-the-shelf ammunition without the need to hand load. However these are quite easy to hand load and source components for. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:Sporting GoodsGuns

12324 impressions

375 views

Description The Sako 85 Finnlight rifle is for those who foray deep into the wild to reach their goal. Hunters on mountain trails or on long-distance treks prefer high-performance rifles that are full-sized, yet still lightweight. The fluted barrel of the Finnlight is just one of the many features that make it ideal for the hunter seeking a perfectly trimmed light rifle. The Sako 85 Finnlight is also an excellent choice for women and younger shooters. SPECIAL FEATURES BARREL The specially engineered fluted barrel of the Sako 85 Finnlight reduces rifle weight and also accelerates the barrel cooling. STOCK Sako 85 Finnlight has a reinforced black polymer stock with a soft grey pattern on its grip surfaces and a Soft Touch surface treatment. ACTION Sako 85 actions come in six different sizes (CSA), providing reliable functioning for each caliber. All Sako 85 models feature controlled cartridge feed (RCS) to eliminate double feed or cartridge jams. The turn-bolt handle places the hand in a natural position during bolt operation, which allows for rapid repeated firing. BARREL Sako 85 barrels are manufactured with a passion for craftsmanship and the very best knowledge of Sako. Barrel blanks are drilled, honed, cold- hammer forged, finished and finally individually inspected by an optical fine-tuning instrument: the human eye. Twist rates are chosen for each caliber to optimize accuracy and bullet performance. Sako 85 barrels, blued or stainless, have a non-reflecting, satin-like surface – with the exception of the Sako 85 Deluxe and Safari models that have a highly polished finish. MAGAZINE The staggered, two-row magazine of the Sako 85 is made of stainless steel. The detachable magazine can also be loaded through the ejection port. The Total Control Latch (patent pending) of the Sako 85 prevents accidental magazine release. SAFETY The special two-way Sako safety locks both the trigger and the bolt handle. The unique bolt release button of the Sako Safety System allows you to load or remove a cartridge from the chamber while the safety is engaged. SIGHTS Most of the Sako 85 models with a blued finish on the barrel are available with either standard or optional adjustable iron sights. The front bead is adjustable in elevation and the rear blade in windage. STOCK The ergonomics of Sako 85’s walnut and synthetic stocks are built for an optimal shooting posture. The excellent balance and smooth bolt operation of Sako 85 rifles enable fast, straight and accurate operation. TRIGGER The weight of pull of the single- stage Sako 85 trigger unit is adjustable from 1 to 2 kg (2–4 lbs). An optional single-set trigger is available for most Sako 85 models. All Sako 85 rifles have an extremely durable, all-steel trigger guard that protects the trigger. An exception to this are the Finnlight and Carbonlight models, which have a lightweight hard-anodized aluminium trigger guard. *NO HOLDS **Accepted method via Email transfer & cash *** gently USED hunting firearm from my safe. I've used this firearm on a number of hunts in the last two years. It is a well maintained firearm that equipped Sako opilok rings and a Vortex Viper 3-9x40 scope plus a Sako sling. I can deliver to Saskatoon area ONLY

categories:Sporting GoodsGuns

10679 impressions

327 views

Some minor damage around one barrel & the orange bit is loose but otherwise no issues Please txt or email only Pick up in NE Community of Temple Will ship at buyers expense

categories:Sporting GoodsPaintball and Airsoft

7774 impressions

730 views

Please text anytime 6476871484. Fully functional comes with 3 dummy rounds and display stand. "This model is excellent. Great quality, ejects rounds, grip safety, slide lock... it all works and fits together like a real 1911 Removable Magazine Mag release in action. Comes with 3 dummy .45 acp rounds Ejectable Dummy Rounds Chambers little dummy rounds. Slide & thumb safety function

categories:Sporting GoodsGuns

13136 impressions

1698 views