Mint Howa 1500 30-06 Stainless in a MDT Field Chasis that is CNC machined aluminum. It has a Leupold 20 MOA rail, Arken EPL4 4-16x44mm, Arken rings, MDT 3.715” AICS steel 7 round magazine , sling, ARCA rail and the gunsmith lengthened the factory freebore to accept longer bullets and be able fit more powder in the case as you can seat them out farther. Bipod and tripod are not included. This gun has been cleaned and oiled each time I’ve taken it shooting. I’ll include the original stock and magazine aswell. $1900 no trades 

categories:Sporting GoodsGuns

1694 impressions

125 views

I have a mint Pedersoli 1804 Potsdam Musket (smooth bore) in .75 (calibre)It is in immaculate condition with no rust or pitting. As it is a flintlock, it is listed as an antique so, no PAL is needed to own or possess this musket. Asking $1,500.00. Offers welcome. Local deals are preferred as shipping will be quite expensive for the buyer. So, I've had several comments that Antique firearms DO require a PAL and that I'm crazy. Well I am crazy but not about this subject. FYI Criminal Code of Canada Section 84(1) antique firearm means (a) any firearm manufactured before 1898 that was not designed to discharge rim-fire or centre-fire ammunition and that has not been redesigned to discharge such ammunition, or (b) any firearm that is prescribed to be an antique firearm; (arme à feu historique) Regulations Prescribing Antique Firearms Prescription 1 The firearms listed in the schedule are antique firearms for the purposes of paragraph (b) of the definition antique firearm in subsection 84(1) of the Criminal Code. SCHEDULE (Section 1) Black Powder Reproductions 1 A reproduction of a flintlock, wheel-lock or matchlock firearm, other than a handgun, manufactured after 1897. Section 84(3) Certain weapons deemed not to be firearms ·         (3) For the purposes of sections 91 to 95, 99 to 101, 103 to 107 and 117.03 of this Act and the provisions of the Firearms Act, the following weapons are deemed not to be firearms: ·         (a) any antique firearm;

categories:Sporting GoodsGuns

3913 impressions

180 views

Please text anytime 6476871484. Fully functional double action revolver in perfect ready to shoot condition. No PAL required. Test fired with smokeless powder. Comes with FRT paperwork. Reloadable ammo is available but sold separately. Colt M1889 "Navy" Double Action Revolver, .41 Long Colt, SCARCE 3-Inch Barrel​ This model is a marked departure from previous Colt revolver designs, and would be produced in a few variants from 1889 until 1907, with some 330,000 made. Many were sold to the US military. It has a counter-clockwise rotating cylinder with locking slots on the back. This one is in very fine condition with a scarce 3-inch barrel. It retains 100% of the nickel. Excellent, sharp markings, matching assembly numbers on all parts. Nice nitre-blue on the hammer and trigger. The action is crisp and strong, and the cylinder indexes and locks properly with no play on trigger pull. The bore is very fine and bright, with sharp rifling. The grips are very fine with no wear . SN 25842. History & Background This model is an important milestone in Colt handgun development, as it is the first American revolver with a swing-out cylinder mounted on a crane, a development which would become the standard for modern revolvers to this day. The 1889 cylinder mechanism was already "on the books" as early as 1880, based on designs of Colt engineers William Mason, C.J Ehbets and Horace Lord. It would take almost ten years for Colt executives to give the green light to manufacture this gun, and once it was available, the US government quickly took notice and ordered several thousand for the Navy. Colt adopted the name "New Navy" in honor of this order. The gun has an interesting counter-clockwise cylinder rotation and a locking mechanism which relies entirely on the two-pronged hand. The 1889 model would remain in production for 18 years. When it was first introduced in 1889, it met with no competition from the other major makers - Smith & Wesson were still heavily engaged in manufacturing top-break revolvers, and Remington only had their solid frame revolvers with removable cylinders to offer. It would take S&W another ten years before they had a viable alternative to Colt's design.

categories:Sporting GoodsGuns

6116 impressions

507 views

  I am downsizing my antique gun and militaria collection to move into a much smaller house with a much smaller gunroom.......offering an original 1880's Mills pattern , woven ammo belt with a rare 1881 Patent Mills/Orndorff brass " OLD RELIABLE " buckle and retainer. The loops hold .40 to .45 caliber rounds and included are twenty .44-90 Sharps bottleneck cartridges. Please view the photos closely as the belt has been well used and has some damaged loops and earlier field repairs.....I have always refrained from doing any repairs or "enhancements" to my original antiques as the wear and tear is a natural part of its history and character. The cartridges are not original but are repro brass which was purchased about 45 years ago and which I loaded with black powder and some very old primers which were purchased about 50 years ago ( used for display purposes only ). The belt and attached buckle were purchased by me in 1967 at an Ohio gun show. The brass buckle has that beautiful patina which only time can create and it does have a few dents from honest wear and tear.....contact me if you interested and need more photos, or different angles, as the website only allows 10 photos. This is a rarely encountered ensemble.    I am willing to ship at "BUYER'S EXPENSE" but it will need to be by a trackable and insured method, or I offer local pick up --- OF COURSE I CANNOT SHIP THE BLACK POWDER CARTRIDGES WITHOUT REMOVING THE POWDER AS THEY ARE CLASSED AS EXPLOSIVES.......THIS COULD BE POSSIBLE AS I HAVE NEVER CRIMPED MY SHARPS CARTRIDGE RELOADS WITH PAPER PATCHED BULLETS. I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery.            

categories:Sporting GoodsGuns

8356 impressions

373 views

I have a collection of drilling jigs, tools and parts for the building of black powder muzzleloaders: a left hand L & R flintlock lock, L & R single set trigger, tang bolts, lock bolts, eschutceon pins, tang bolts, inlays, slotted wood screws, brass and German silver inlay wire, brass side plates and castings, pistol trigger guard, trade gun buttplate, and other numerous small items. Priced out; everything would cost over $800.00

categories:Sporting GoodsGuns

3944 impressions

208 views

Howdy Townpost! I've got a nice little uncommon and good condition subcompact Remington for sale now! This started its life as a Remington Model 1865 New Model Police as a cap and ball percussion revolver in .36 caliber. Many of these were never percussion guns as they existed in a weird transition period. And Remington made some of them from the ground up as cartridge guns. This one most likely was in inventory as a percussion revolver and was turned into a .38 rimfire cartridge revolver based on the serial number, in my opinion. These are one of the more rare and lesser known Remington cap and ball guns that were made. Remington only made 18,000 between 1865 and 1873. So they are relatively uncommon and scarce gun today. This is actually my personal favorite model of Remington percussion revolver they're a very handy subcompact-sized gun by today's standards they're bigger and much more comfortable in the hand in the grip than the pocket models but nice and light unlike the full size military .44s and they point very naturally. This particular example is in very good condition the nickel is a very high percentage of coverage some of the original silver plate is still visible on the trigger guard and some of the low areas. The color case hardening is still very colorful and defined on the hammer (pictured). The grips have been refinished but they are the originals. The wood grain is very interesting and beautiful in my opinion. The bore is in excellent condition especially for a Civil War era black powder firearm. This was likely carried in a police officer's holster and not fired much. It was well taken care of and the clean and good condition bore and chambres are reflection of that. The the mechanical function of this firearm is excellent as well. When I got the firearm it was actually in amazing condition to begin with and the mechanical function was perfect. It locks up and times perfectly. The hammer and the trigger pull are very crisp, light and smooth. And didn't require any adjustment, Remington did the job and they did it right the first time. The entire revolver has been taken apart and given a gunsmith's cleaning and was reassembled and lightly oiled. I came across a nice little Hunter leather holster at a gun show and found that it fit this gun very well so it's included as a freebie with the gun (pictured). The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:Sporting GoodsGuns

20772 impressions

1211 views

Please text anytime 6476871484. Fully functional antique revolver in perfect and ready to shoot condition ,very good single and double action. Reloadable ammo is available but sold separately No PAL required. Comes with FRT RCMP paperwork. Tested fired with smokeless powder ammo. Smith & Wesson 44New Model No. 3 Top Break, .44 Russian Revolver. This one is in perfect condition with 100% of the finish intact. The serial numbers match . The action is strong and accurate, and the cylinder indexes and locks properly. The bore of the 5-inch barrel is quite good, with strong and sharp rifling. Mechanically in excellent condition with proper timing and lockup. The latch is also solid with zero play. Extractor works as it should. SN 17793, very good overall. History & Background Smith and Wesson's first double action design dates back to at least 1872 - years before Colt ever attempted a double action cartridge revolver. It was mentioned in a letter to the Russian envoy General Orlof, and although the sale to Russia never materialized, it served to pave the way for the very popular and successful line of double action top break revolvers. The .44 Russian model was actually the first to be produced as a prototype, and the last to be released for sale to the public. For this reason there exists a degree of confusion over the proper terminology: the first one to be manufactured for sale was the .38 caliber model, followed by the .32. The .44 caliber model was not released until 1881, and is variably known as the No. 3 Double Action, the Double Action "Navy" (a name Daniel Wesson wanted to keep alive to differentiate this model from the No. 3 single action, and still holding out hope to sell it to the Russian navy), and the First Model Double Action. Originally, the .44 Double Action was made with a 1 7/16 inch cylinder, however an optional .44-40 version was available as of 1886. This required a 1 9/16 inch cylinder, and a longer frame. The firm soon realized that it was too expensive and cumbersome to manufacture two different sizes of frames for what was essentially the same gun, and the shorter cylinder and frame were dropped in faivour of the longer one in the early 1890's. The No. 3 frame .44 double action top breaks were dropped from the Smith and Wesson catalogue in 1913.

categories:Sporting GoodsGuns

21263 impressions

1374 views

Please text anytime 6476871484. Fully functional double action revolver in perfect ready to shoot condition. No PAL required. Test fired with smokeless powder. Comes with FRT paperwork. Reloadable ammo is available but sold separately. Colt M1892 "New Army" Revolver has significant improvements over M1889 with better locking and indexing mechanism. This one is in excellent condition. The nitro blue on the trigger and hammer is well visible and retains 95% of original blued finish. The action is strong and accurate, and the cylinder indexes and locks properly very little play on trigger pull. The bore of the 4 1/2 inch barrel is good and bright with strong rifling. The markings are sharp and defined throughout. The assembly numbers on the cylinder, crane and frame. The original grips are good and undamaged.​​ S/N 71799 History & Background This model is an important milestone in Colt handgun development, as it is the first American revolver with a swing-out cylinder mounted on a crane, a development which would become the standard for modern revolvers to this day. The 1889 cylinder mechanism was already "on the books" as early as 1880, based on designs of Colt engineers William Mason, C.J Ehbets and Horace Lord. It would take almost ten years for Colt executives to give the green light to manufacture this gun, and once it was available, the US government quickly took notice and ordered several thousand for the Navy. Colt adopted the name "New Navy" in honor of this order. The gun has an interesting counter-clockwise cylinder rotation and a locking mechanism which relies entirely on the two-pronged hand. The 1889 model would remain in production for 18 years, with significant improvements in 1892, 94, 95, 96, 1901 and 1903. When it was first introduced in 1889, it met with no competition from the other major makers - Smith & Wesson were still heavily engaged in manufacturing top-break revolvers, and Remington only had their solid frame revolvers with removable cylinders to offer. It would take S&W another ten years before they had a viable alternative to Colt's design.

categories:Sporting GoodsGuns

27560 impressions

1837 views

Please text anytime 6476871484. Fully functional double action revolver in ready to shoot perfect like new condition. No PAL required. Ammo is available but sold separately. (original ammo also can be bought in stores) Comes with FRT paperwork. Tested with smokeless powder and modern ammo. Swiss M1882 Service Revolver, 7.5mm Swiss Ordnance This is a very well made revolver, based on the Chamelot & Devigne and Nagant designs, modified by Swiss firearms designer Rudolf Schmidt. The gun utilized George Abatis' unique safety which disconnects the hammer from the trigger when the loading gate is open. This allows the shooter to advance the cylinder using the trigger to quickly load or unload the chambers. The gun is in excellent condition, with 99% of the blue intact. The straw colors on the hammer and trigger are still well visible. The action is crisp and accurate, and the cylinder indexes and locks properly with zero play. The bore of the 4 1/2inch barrel is good with sharp rifling. The barrel was replaced by arsenal with newer one dated 1902 but it doesn't affect antique status of the gun. Matching serial numbers and assembly numbers. The gun is chambered for the 7.5mm Swiss Ordnance cartridge, but shooters in Switzerland frequently use the .32 S&W Long cartridge instead. Excellent overall. History & Background Swiss M1882 military revolvers are fairly scarce on the Canadian antique market. Although the arsenal at Bern produced over 37,000 pieces between 1883 and 1937, only those with a serial number below 7508 are considered antique in Canada. The M1882 was produced by both the SIG Neuhausen and the Bern factories for military use and private sale. Specimens with a serial number below approximately 20,000 were fitted with plastic grips bearing the Swiss cross. Later models would be fitted with plain wooden grips. The M1882 saw a slight re-design in the 1920’s and was re-named the model 82/29. The M1882 was in service from 1883 until the 1970’s and was carried by military, police, border patrol and home guard forces. These Swiss revolvers are usually in extremely fine condition when sold on the antique market. This can be attributed to the following two facts: firstly, Switzerland has not been involved in a war since 1847, its last armed conflict, a short-lived civil war. The second reason for the fine condition is the Swiss government’s policy to allow soldiers leaving the service to keep their side arms. Given this opportunity, most soldiers were careful to maintain and protect their guns more diligently than if it had been just an issued piece to be returned to the arsenal. The Swiss Ordonanzrevolver of 1882 is chambered for the 7.5 Swiss Ordnance cartridge, but in Switzerland the .32 S&W Long is commonly used, as it is more readily available. ​

categories:Sporting GoodsGuns

15167 impressions

1283 views

For sale is my a mechanically great, all matching, 1880 production short barrel "Shopkeeper" Colt Thunderer in .41 LC. Selling because cash is tight. As an Antique, this handgun is exempt from Canadian licensing and registration requirements, and can be used anywhere a nonrestricted firearm would be legal. Black powder or light load smokeless .41 Long Colt rounds can be purchased online or worked into deal. The 1877 line of revolvers was Colt's first double action model ever produced. They made almost 170,000 from 1877 to 1909 with three main designations: the Colt "Lightning" in .38 LC, the "Thunderer" in .41 LC, and the "Rainmaker" in .32. However, due to Canada's laws, only the .41 caliber ones are designated as "antique". This is luckily one of those guns, and it needs no registration or licensing to own. These models are highly collectible handguns, particularly the short barrelled "Shopkeeper" model due to its easy to stow nature. Arizona Wild West gunslinger Doc Holiday carried one of these. This particular example, SN 22261, was produced rather early in 1880 and has a short but accurate 3.5" barrel. All parts match, and the exterior retains an excellent 85% of the original nickel. The internal mechanics are incredibly clean and original. The bore is fair with strong defined rifling. Grips are nice like-new repros with rampaging Colt medallions. All hammer clicks are present, lockup is rock solid, and the trigger pull is pleasant in both SA and DA. The barrel is stamped with the Hartford Connecticut Colt address and the acid etched "COLT D.A. 41" is still visible. The left side of the frame displays the 3 line 1871, 1874, and 1875 patents. It reads "41 CAL" on the trigger guard. Can work ammo into deal with PAL No PAL required for revolver Must be 18 Comes with FRT page Ships within Canada Check out my profile for more antique handguns! I make no claims about the safety of firing ANY Antique firearm. Consult with a gunsmith first.

categories:Sporting GoodsGuns

23933 impressions

1748 views

This coming weekend Aug 1-3 CAMROSE DAYS INN - “ old Norseman hotel “ Hunt Mania Gun & Sportsman Show 2025 G-U-N -S AUG 1 -3 (FRI, SAT AND SUN) Show Hours FRI 10am - 8 PM SAT 9 AM - 6 PM SUN 10 AM - 4 PM G. /U. /N & Sportsman Show *****Buy -Sell -Trade ***** Everything under one roof Hunting, Fishing, Camping, Hiking, Archery, Track Chairs, Outdoorsy stuff, jerky, military surplus, bang stix bang powder, Knowledgeable vendors and so much more ! Best deals, Silent Auction , plus so much more !! 🦌 🎣 🏕️ 🖼️ Admission at the Door * Kids 13 & under are FREE admission Family rates , weekend rates available So don’t stay home, 🏠 Bring the family WHERE ? Days Inn Camrose Aug 1-3rd 2025 See you there ⭐️ ⬇️⬇️⬇️⬇️⬇️⬇️⬇️

categories:Sporting GoodsGuns

5472 impressions

736 views

I have 150 rounds of super rare 25-20 ammunition that I formed from 32-20 cases. They are loaded with 60 grain Hornady soft points, 11.0 grains of Accurate 1680 powder and CCI-400 primers which yields a velocity of 1621 FPS. Reason I’m selling, my Winchester model 92 likes a slightly larger diameter bullet. This load and bullet did shoot really well out of my old Marlin lever gun. PAL is a must, text works best, no shipping, pick up or meet FTF.

categories:Sporting GoodsGuns

12728 impressions

864 views

Winchester Model 1894 Ref #1041. Early five digit serial number. Dated 1897. This Winchester is a lever action, sporting rifle, octagon barrel, full mag. Dated 1897 Stock is excellent, appears original. A few marks. Original metal recoil pad fits well. Barrel is 26” long with sights intact. The read sights are intact and appear original. Bore is very nice, no obvious corrosion, does not appear to have ever seen black powder. Rifling throughout. Bluing is 40-50%. There are bumps and scratches on metal expected on a plus 125-year-old firearm. The drivers side receiver has a few light scratches and bangs. Screws have been used but are still usable. There is one on the loading port side that may have been a replacement. The lever functions well, safety checks out and the trigger pull, and drop are good. Firing pin is evident and protrudes when pushed on. Ejector is intact and tight, and magazine follower functions correctly.  Overall, I grade this firearm as good and should be fully functional. I don’t see many from this time frame with bores looking this good. I did not test with snap caps or fire. Only reasonable offers are considered. Low ball offers will not be responded to. Trades in person only. The firearms and accessories I sell may be new or used and are usually acquired through estate liquidations. I visually inspect them and check basic operation only and share what I know or find in the description and photos. They are not live test fired. I provide full disclosure on what I find but can not be held responsible for what I may miss. It is your responsibility to have your firearm inspected by a competent gunsmith before firing, shoot at your own risk. I am not a gunsmith. I do not warrantee these guns or any associated accessories, nor do I accept returns. They are, as is, where is, and all sales are final. On final purchase you have accepted full responsibility for the item. E-transfer or cash only. S/H & insurance are extra. Tracking number will be provided. I require your full name, PAL #, date of birth and email address for licence verification for firearms and ammunition. Thanks, Darcy Darcy's Estate Liquidations

categories:Sporting GoodsGuns

17748 impressions

1297 views

belgium made sxs , very nice wall hanger or collectable, laminated barrels double trigger,walnut stock, name on sideplate crescent belgium ,external hammers ,30 in barrels, was built as a black powder gun and has 2 1/2 chamber if memory serves .

categories:Sporting Goods

2016 impressions

462 views

Winchester Model 1894 38-55 Ref #1040 This Winchester is a lever action, sporting rifle, octagon barrel, full mag. Dated 1895 Stock is very good – good. Small tang crack 1” long, and a minor chip gone at tang. Forearm has an app. 2” crack and a few very minor cracks. The stock has typical bang marks. Finish appears original or period correct. Original metal recoil pad fits well. Barrel is 26” long with sights intact, rear sight may have been replaced at one time, again period correct. Bore has black powder corrosion but it’s clean now and has rifling top to bottom. Bluing appears original and app. 75-85% throughout. There are bumps and scratches on metal and evidence of minor surface rusting. Screws have been used, but in very good shape. The lever functions well, safety checks out and the trigger pull, and drop are good. Firing pin is evident and protrudes when pushed on. Ejector is intact and tight, and magazine follower functions correctly. Overall, I grade this firearm as very good and should be fully functional. I did not test with snap caps or fire. Only reasonable offers are considered. Low ball offers will not be responded to. Trades in person only. The firearms and accessories I sell may be new or used and are usually acquired through estate liquidations. I visually inspect them and check basic operation only and share what I know or find in the description and photos. They are not live test fired. I provide full disclosure on what I find but can not be held responsible for what I may miss. It is your responsibility to have your firearm inspected by a competent gunsmith before firing, shoot at your own risk. I am not a gunsmith. I do not warrantee these guns or any associated accessories, nor do I accept returns. They are, as is, where is, and all sales are final. On final purchase you have accepted full responsibility for the item. E-transfer or cash only. S/H & insurance are extra. Tracking number will be provided. I require your full name, PAL #, date of birth and email address for licence verification for firearms and ammunition. Thanks, Darcy Darcy's Estate Liquidations

categories:Sporting GoodsGuns

23819 impressions

846 views

I have a single stage RCBS press, twin beam powder scale , powder measure hopper, powder measure scoop set, case trimmer, ,deburing tool, unloading hammer, primers, powder, projectiles and dies for 6mm, 243 , 257 roberts, 25-06 , 270, 7mm mag, 303 British, 308, 30-06. I also have 5 loading manuals, 1 gun service book , 1 casting manual.

categories:Sporting Goods

14358 impressions

1399 views

Looking for a good last minute Christmas gift for your wife? Look no further. This 32 rimfire is in great condition other than some minor pitting in the bore and few blemishes in the nickel. Works great, timing and action is on point. All matching serial numbers. Will come with case, 22 cal blanks (primers), 28 rounds of already hand packed rounds, 24 additional reusable brass cartridges (long and short), some lead balls and healed lead, a pound of 3F black powder with powder tray and spoon, and a scale. No press required to reload bullets. **PAL not required to purchase or possess the gun** however PAL is required for the ammunition and I will only sell in a package. Will not ship, must be local sale or pickup. Text if interested 7095713300

categories:Sporting GoodsGuns

13979 impressions

1338 views

Selling my Ruger American Predator 22-250 with 6-24x50 Diamondback Scope, Bipod and Scope Sock. Gun has been fired around 150 times. The scope is excellent, and it is next to new conditions. Price: $800 Location: Prince George Also selling a complete reloading setup that works with 22-250 for $1200. Reloading equipment is valued at over $3500 new. Comes with Primers, Powders, Brass, Tools, Press, Dies Etc.

categories:Sporting GoodsGuns

20776 impressions

1559 views

Ever think about trying a wildcat cartridge? I have 20 Extreme dies available as well as the reamer. Wth is a 20 Extreme? It is a fast, accurate, fun shooting little 20 caliber cartridge based off the 222 Remington case that is easy on the shoulder and barrel, cheap to load for too. It was designed by my late friend and fellow gun enthusiast. No fire forming required, run the case thru the dies, trim, load and shoot. These days when components are so expensive it's nice to be able to go to the range and shoot more than a couple rounds and actually have some fun. One load I have uses only 18.6 grains of powder, that's somewhere around 375 loads to a pound of powder! Great for gopher, coyotes, fox and other small game or just target shooting for fun. These are brand new still sealed from factory

categories:Sporting GoodsGuns

15812 impressions

900 views

Price drop from 3650 Dec 1! This is an incredibly rare antique Unwin & Rodgers NON-XLL folding knife pistol from the mid-1800s, chambered in a 28 caliber rimfire. Based on dimensions it should accept 25 Stevens rimfire. This is a pocket knife to put all Swiss Army knives to shame, packing a big punch with a folding trigger single action handgun. It is a very collectible piece, and hard to come by in this condition. It would have probably been owned or given as a gift to a relatively wealthy businessman as an elegant approach to utility and self defense. In the 1841 Sheffield trade directory, Unwin and Rodgers advertised themselves as “manufacturers of spring knife cutlery, including lancets, scissor knives and pen machines, pistol knives, American and Indian hunting and self-defense knives.” The theory is that the NON*XLL markings, when read aloud, translate into the phrase “Non-excel,” signifying that the Unwin and Rodgers knife pistol had no peers. Read more here: http://www.johnbhenry.com/store/p152/UNWIN_%26_RODGERS_NON-XLL_KNIFE_PISTOL_%281170%29.html As a pre-1898 Antique collectible, this can be owned by anyone over the age of 18 without any registration or paperwork, and can be fired pretty much anywhere a non-restricted gun would be acceptable. This British made knife pistol is in beautiful condition, with the steel in amazing condition on both the blades and the barrel also. It has carved horn grips, a beautiful shiny barrel, and an even sheen on the knives with no rust. Where many old knives have been sharpened and worn down over the decades, the blade profiles are still original and incredibly sharp. The left grip has a small crack where the rivets are, but it is still very stable and solid. It has multiple Birmingham proofs, and is signed on both blades. The trigger and both knives fold and unfold very cleanly. It is about 10 inches long when the knives are opened. The mainspring is very strong, and all functions correctly in the action and ejector. It has a storage compartment for keeping shells, cleaning patches, and spent casings. The blades are in fantastic shape, especially at over 160 years old. No PAL required, 18+ Ships anywhere in Canada I make no claims about the safety of ANY antique firearm. Check with a gunsmith if you have concerns! Check my ads for more awesome antique handguns! (Tags: British, English, Belgian, German, French, revolver, rifle, RF, CF, .22, .32, .38, .44, .45, .455, black powder, boxer, eley, webley, vintage, william, sheffield)

categories:Sporting GoodsGuns

55371 impressions

2954 views

I'm selling my Shilen Select match barrel for a savage small shank action. The barrel is an S7 sendero contour, 26" 1:8 twist, 4 groove with a .274 no turn neck. The barrel has seen exactly 725 rounds through it with slow burning powders, every round is documented and recorded along with load data for each round fired. Lots of barrel life left,This was not a comp barrel, no prolonged strings of fire. It was a deer,coyote gun. Very accurate and liked multiple different bullets. Only reason for selling is I had a new barrel done in 6 Rem AI in an IBI carbon fiber barrel for a lighter weight rig. The barrel new almost $700 plus shipping. It is an easy 1/2" MOA barrel. Asking $330 Firm I also have 100 pieces of Lapua 30-06 brass that have been formed and neck turned with one firing for this barrel, better than any brass you can find for the 6mm Rem. These can be had for $80 additional. Plum

categories:Sporting GoodsGuns

13389 impressions

927 views