This is all once fired range brass which has been deprimed, cleaned and polished and looks very good. It can be used to reload for either 223 or 556 ammo. I have several head stamps available ( IVI, LC, PSD ). You will have to swage or ream the primer pockets to remove the factory crimp which is a very easy process. I will sell these in lots of 300 for $75 or 400 for $100 per lot. I will ship up to 600 cases (two lots) anywhere in Canada for $20 shipping. Pay by cash or EMT Phone 780-532-0330 (Land line) Text 780-876-5050 Email jdwill1951@gmail.com

categories:Sporting GoodsGuns

71507 impressions

2172 views

HAVE THE FOLLOWING RIFLE & PISTOL RELOADING DIE SETS FOR SALE: PRICES ARE IN THE AD / SHIPPING IS AT CANADA POST ACTUAL COST TO THE BUYER ALL DIES ARE IN VERY GOOD GENTLY USED CONDITION WITH NO DAMAGE OR MISSING PARTS A FEW HAVE VERY MINOR SURFACE RUST AND ALL COULD USE A THOROUGH CLEANING BONANZA: - 25.06 BENCH REST 3 DIE SET + BENCH REST SEATER & HORNADY NECK DIE $60 HORNADY: - 7MM STW FL 2 DIE SET #54440 SERIES IV CUSTOM NEW DIMENSION $50 LYMAN: - .243 / 2 DIE SET WITH INSTRUCTIONS IN A RED PLASTIC BOX $50 RCBS: -. 30/30 - 2 Die FL SET #14601 VGC W/INSTRUCTIONS $50 - .17 REM - 2 Die SET #32001 (SPECIAL ORDER) VGC W/SHELLHOLDER $40 - .41 MAGNUM - 4 DIE SET WITH LYMAN TC 41 MAG FL DIE + INSTRUCTIONS + LYMAN X30 SHELLHOLDER & XTRA SEATER PLUG $60 ADDITIONAL PICTURES ARE AVAILABLE UPON REQUEST. DIES WILL BE SHIPPED WITH FULL INSURANCE & TRACKING WILL COMBINE SHIPPING ON MULTIPLE PURCHASES LOCAL PICK-UP IS AVAILABLE IN THE ST. THOMAS AREA PLEASE SEE MY OTHER ADS FOR ADDITIONAL RELOADING EQUIPMENT

categories:Sporting GoodsGuns

40025 impressions

1830 views

I will purchase your unwanted firearms that are collecting rusty dust or that are in need of repair or restoration. Also interested in your unwanted ammunition, reloading equipment, tools and supplies. Have PAL including restricted & prohibited status. Willing to pay fair market value. Email, text or call to make arrangements. Willing to travel to your location for the right offering, no lot too large or too small. Estate lots are our specialty. WHY give the auction houses 25% / 35% or more? Thank you in advance for your consideration.

categories:Sporting GoodsGuns

22095 impressions

2359 views

Brand new The Mini-Clip 2.0 was better than the original but the opportunity presented itself to go further using new highly efficient mold/manufacturing partners right here in Texas. The Mini-Clip 2.0 Flex has the flexibility to accommodate a wider range of short shell lengths, should Aguila ever want to make an even shorter (or longer) Minishell. Re-loaders were very interested in this accommodation as are buyers of Exotic Products Shorty shells in varying lengths. The 2.0 Flex will feed all but the longest in their line, the 3 Buck. Allows use of 12ga 1.75” Birdshot, Buckshot, and Slug shells                  Fits: 12ga Mossberg 500, 590, 590A1, and Maverick 88 models Use with Aguila Birdshot, Buckshot and Slug offerings in Mossberg 12ga 500, 590 and Maverick 88 models Easily installs and uninstalls in seconds to allow use of 1.75", 2.75" or 3" shells as desired by user Practice with less expensive Aguila birdshot as the recoil response vs. Aguila buckshot is slight Low recoil of buckshot allows for safe, easy and comfortable aiming and discharge with pistol grip configurations (with proper grip/face clearance, of course). Not confined to hip and laser shooting Mini-Clip stays in well, but may want to tape in with electrical or Gorilla tape for close contact or heavy foliage environment applications

categories:Sporting GoodsGuns

7934 impressions

493 views

I am selling some 1 lb cans of powder each can is $95 4 cans 1 lb each varget 1 cans 1 lb each imr 4350 5 cans 1 lb each H 4831 1 jug 8 pounds Imr 4350 for $700 1 jug opened 71/4 pounds varget $600 At this price they will not last long fcfs Thanks text 587-337-7340 Buy 3 cans or more for $90 a can !!

categories:Sporting GoodsGuns

5154 impressions

632 views

Properly sized to fit standard SKS chest rig pockets. Consistent reloads every time. Simple, lightweight, and easy to use. Makes a real difference for very little cost. See it in action in the link below https://youtube.com/shorts/kWRs6mGWjx8?si=sGBKLfwlzI0qFIU5 What it does Stabilizes the stripper clip Keeps rounds aligned during loading Reduces binding, tilting, and slipped rounds Why SKS owners like it Makes reloading noticeably easier and quicker No permanent modification Installs and removes in seconds Fully legal, non-regulated accessory Lightweight and durable Details Designed specifically for the SKS Made from tough plastic Compact — keep it in your range bag Works with standard SKS stripper clips Price $20 each 20pk  2 versions with different shaped holes.  Shipping available across Canada $5 , E-Transfer  Located in Aurora, ON Full Disclaimer: This is not my invention, it was sourced from https://www.thingiverse.com/thing:4141412 Under https://creativecommons.org/licenses/by/4.0/ I am able to commercially produce this product.  

categories:Sporting GoodsGuns

348 impressions

52 views

Lee Ultra .30.06 $70 All 2 die sets $40 Forster UltraMicrometer in 7mm rem mag $75 SOLD. Text is best 780 978 0172. Buyer pays shipping. .280 RCBS SOLD. .308 win SOLD.

categories:Sporting GoodsGuns

13599 impressions

896 views

Hi big hole reloader, excellent bullet for 45-70, sizing .459, weight 415gr triple lube + Gas check, box of 100 for 60$. Shipping on your dime. Up to 175 bullets for 22$ shipped.

categories:Sporting GoodsGuns

30898 impressions

1628 views

Unfired, BNIB Henry Big Boy Brass (H006G) – chambered in .44 Magnum/.44 Special and rockin’ a 10+1‑round tube capacity. This polished‑brass receiver lever gun features a 20″ octagonal blued steel barrel, American walnut straight‑grip stock, and side‑loading gate for fast reloads. Sights are a fully adjustable semi‑buckhorn rear with diamond insert and a brass bead up front. It’s also drilled and tapped for easy optic mounting. Weighing 8.68 lbs, it’s the ideal blend of classic styling and modern usability. PAL required for the transfer and will be validated. No trades please and price is firm.

categories:Sporting GoodsGuns

34638 impressions

1622 views

Warrior Assault Systems Polymer 5.56 Mag Pouch x 2 ===== $38 each TAKE BOTH for $75~!! MOLLE/PALS Compatible Rotates 360° to desired orientation Locks out to 12 different positions Strong, durable construction with adjustable tension Pull to release Mags, No catches or clips Allows faster reload times Pick up around GTA Ship on buyer

categories:Sporting GoodsGuns

3438 impressions

391 views

Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.

categories:Sporting GoodsGuns

19814 impressions

729 views

If this ad is still up then item is available For Sale -  Lee Precision 45-70 Govt full length steel reloading 3-die set - complete set (no crimp die included) $85 firm 1 set available Brand new in box - new manufacture -full length sizing die -bullet seating die -expanding die -powder scoop -shell holder -data, load chart, and instructions -handy red box & lubricant If you want a crimp die also, contact me as one is available for sale... EMT (shipped) or cash(F2F pickup) - Remote pick up available by appointment only, house drop box or shipped at buyers expense. Small package/tracked, all provinces - $22 (small box) via Canada Post Text or email only / unable to answer calls in remote areas No trades or offers

categories:Sporting GoodsGuns

4695 impressions

152 views

For Sale - Lee Precision BNIB .303 British Lee Classic Loader Full Length Sizing Die set $80 1 set available Brand new in box - only opened to take pictures, Contains: -full length body sizing die -de-capping chamber & decapper -bullet seater -powder scoop -priming rod -data, load chart, and instructions -handy red box EMT or cash - pick up available by appointment only, house drop box or shipped at buyers expense via Canada Post within Canada only. Small package/tracked, all provinces - $22 No trades or offers If this ad is up then item is still available.

categories:Sporting GoodsGuns

23298 impressions

1112 views

30 calibre. Comes with two boxes of factory ammunition, 20 brass and reloading dies. Phone only. No texts please.

categories:Sporting GoodsGuns

30304 impressions

1930 views

Please text anytime 6476871484. Brand new. This is a well-made kit including all 11mm adjustable dies and tools you need to make your own 11mm reloadable ammo. Comes with manual and instructions.

categories:Sporting GoodsGuns

14338 impressions

1372 views

Please text anytime 6476871484. Fully functional antique revolver in mechanically perfect and ready to shoot condition ,very good action, no PAL needed. Reloadable ammo is available but sold separately Comes with FRT RCMP paperwork. Smith & Wesson 44New Model No. 3 Top Break, .44 Russian Revolver This one is in very good condition. The the serial numbers match . The action is strong and accurate, and the cylinder indexes and locks properly. The bore of the 6-inch barrel is quite good, with strong rifling. The black hard rubber grips are good and undamaged. Mechanically in excellent condition with proper timing and lockup. The latch is also solid with zero play. Extractor works as it should. SN 5819, very good overall. History & Background Smith and Wesson's first double action design dates back to at least 1872 - years before Colt ever attempted a double action cartridge revolver. It was mentioned in a letter to the Russian envoy General Orlof, and although the sale to Russia never materialized, it served to pave the way for the very popular and successful line of double action top break revolvers. The .44 Russian model was actually the first to be produced as a prototype, and the last to be released for sale to the public. For this reason there exists a degree of confusion over the proper terminology: the first one to be manufactured for sale was the .38 caliber model, followed by the .32. The .44 caliber model was not released until 1881, and is variably known as the No. 3 Double Action, the Double Action "Navy" (a name Daniel Wesson wanted to keep alive to differentiate this model from the No. 3 single action, and still holding out hope to sell it to the Russian navy), and the First Model Double Action. Originally, the .44 Double Action was made with a 1 7/16 inch cylinder, however an optional .44-40 version was available as of 1886. This required a 1 9/16 inch cylinder, and a longer frame. The firm soon realized that it was too expensive and cumbersome to manufacture two different sizes of frames for what was essentially the same gun, and the shorter cylinder and frame were dropped in favour of the longer one in the early 1890's. The No. 3 frame .44 double action top breaks were dropped from the Smith and Wesson catalogue in 1913.

categories:Sporting GoodsGuns

10788 impressions

429 views

Please text anytime 6476871484. New. No PAL required for unassembled cartridges. 32RF long and short reloadable rim fire cartridges ammo new production $10 each. Those are new production reloadable cartridges especially made for antique firearms. Each set comes with Bullet, Brass/Case and .27cal blank cartridge as primer. $10 unassembled. Those are improved version of modern 32rf ammo and they do not require to be loaded in a special way to work properly. Brass is twice as thick compared to regular to provide additional durability and safety for pocket revolvers with thinner cylinder walls. They come with polymer coated bullets weighting 100grn, 95grn, or 75grn of your choice and do not require to be lubed. Power of .27 blanks is enough to shoot bullets with speed up to 500-600fps without any additional powder needed.

categories:Sporting GoodsGuns

16205 impressions

705 views

Please text anytime 6476871484. Fully functional revolver in perfect ready to shoot condition. No PAL required. Reloadable ammo is available and sold separately. Remington-Smoot New Model No. 4, .38 Rim Fire Pocket Revolver. The design of the "New Model" Line of Remington revolvers is based on a patent issued to William S. Smoot in 1873. The four types, No. 1 through 4, are all similar in their use of a two-part frame which is joined just above the grip. This one is the No. 4, which resembles the popular "Bulldogs" of the day. It is in excellent condition with original nickel . The action is strong and accurate, and the cylinder indexes and locks properly with no play. The bore of the 2 1/2 inch barrel is excellent and bright, with sharp rifling. The black hard-rubber grips are very fine and undamaged. SN 21108, excellent overall.​​ History & Background Like Colt, Remington had to get into the cartridge pocket revolver market by sheer public pressure. They, too, like Colt, experienced difficulties trying to compete with the cheap "suicide specials" which were available at that same time. Although sales were brisk at first, and the guns enjoyed great popularity due to their excellent quality, in the long run the public opted for cheap over quality, and by the mid 1880's production of the smaller models was halted. The Smoot patent refers to the spring-loaded cylinder pin / extractor found on the New Model No. 1, 2 and 3. Remington was well known to acquire the patents of other designers and incorporating them into their own line of products, and into the name of the models. Inventors such as Beals, Elliot, Rider and Smoot all contributed to the success of Remington handguns.

categories:Sporting GoodsGuns

28653 impressions

2477 views

Please text anytime 6476871484. Brand new. .38 RF Long Reloadable Ammo loaded $10 each Comes in 2 power levels : regular and P+ for larger frame guns in good condition.

categories:Sporting GoodsGuns

25708 impressions

2305 views

Please text anytime 6476871484. Brand new. .38 RF Short Reloadable Cartridges Ammo $10 each

categories:Sporting GoodsGuns

18012 impressions

1536 views

Please text anytime 6476871484. Fully functional double action revolver in perfect condition. No PAL required. Comes with FRT paperwork. Reloadable ammo is available but sold separately. Colt M1889 "Navy", .41 Long Colt Revolver This one is in excellent condition. It bears about o 99% of its original nickel plating. The nitre blue on the trigger, hammer and screw heads is well visible. The action is smooth and accurate, and the cylinder indexes and locks properly. The bore of the 4.5 inch barrel is fine and bright, with sharp rifling. The markings are sharp and defined throughout. The assembly numbers match on the cylinder, crane, barrel and frame. The grips are excellent and undamaged, showing no wear.SN 20959, rated excellent overall.​​ History & Background This model is an important milestone in Colt handgun development, as it is the first American revolver with a swing-out cylinder mounted on a crane, a development which would become the standard for modern revolvers to this day. The 1889 cylinder mechanism was already "on the books" as early as 1880, based on designs of Colt engineers William Mason, C.J Ehbets and Horace Lord. It would take almost ten years for Colt executives to give the green light to manufacture this gun, and once it was available, the US government quickly took notice and ordered several thousand for the Navy. Colt adopted the name "New Navy" in honor of this order. The gun has an interesting counter-clockwise cylinder rotation and a locking mechanism which relies entirely on the two-pronged hand. This would prove to be a weakness in the design, and by 1892 locking lugs on the outside of the cylinder were introduced. The 1889 model would remain in production for 18 years, with significant improvements in 1892, 94, 95, 96, 1901 and 1903. When it was first introduced in 1889, it met with no competition from the other major makers - Smith & Wesson were still heavily engaged in manufacturing top-break revolvers, and Remington only had their solid frame revolvers with removable cylinders to offer. It would take S&W another ten years before they had a viable alternative to Colt's design.

categories:Sporting GoodsGuns

15929 impressions

874 views