If this ad is still up, then item is available! For Sale - 1894 Winchester rifle in 38-55 cal. with round 26” barrel. Started out at $1200 Now $950 (as of Dec 15th) According to the serial number 161XXX, it puts the date of manufacturing to 1902, crescent butt plate, semi-buckhorn rear sight, all original except rear sight elevator is a replacement. Round 26" barrel, dark bore, good rifling, approx. 20% plum finish remains with lacquering on some of the metal. Dark walnut forend & stock (original) with the stock having a small piece missing from the left side and about a 1.25" old crack on the wood right side both near the bottom of the tang/guard (pictures are attached) but stock is still mounted solid to the tang. Action is still quite tight for it's age and old sling swivels had been added to the rifle at some point in it's younger years. Must have valid PAL to purchase and will be verified. EMT (shipped) or cash(pickup) - Shipping and/or insurance available at buyers expense thru Canada Post or a courier. Rear stock can be removed for transport. No trades or offers

categories:Sporting GoodsGuns

12010 impressions

836 views

1. 1947 COLEMAN LANTERN BRASS FUEL TANK POSSIBLY FOR MDL. 242 Used Coleman fuel tank dated 1947. Brass upper tank & fittings with steel bottom. Bare tank with no fuel caps or pump assembly. I believe this font is for a model 242 lantern but may fit others. Tank "Sunshine of the Night" trademark is below the filler hole and reads Coleman Canada 1947. I can not read the model number on the bottom. Bottom diameter to outer rim = 5" Height to top of fitting = 4" Original green, dents left of the filler hole & right of trademark, inside appears clean. $20 2. 1973 & 1974 COLEMAN CANADA FUEL TANKS Used Coleman Canada steel fuel tanks dated 1973 & 1974. Bare tank with no fuel caps or pump assembly. I'm not sure what model they fits but I believe it is for a model 335 Lantern and may fit others. Bottom diameter to outer rim = 5-3/8" Height to top of fitting = 4" Condition as shown ~ Coleman stickers are good; chipped original paint, metal is not dented. $15 Each 3. USED COLEMAN LANTERN BURNER FRAME & VALVE ASSEMBLIES - Two COLEMAN Brass Lantern Burner Assemblies I am not sure what they fit but I believe it is for a model 242 from the late 40's. Base is a metal, upper structure appears to be brass. Bottom diameter = 3¾"" Height = 6¼" $20 each - 3 COLEMAN Lantern Burner Frame & Valve assemblies Mdl 321, 335 & Maybe others Used pressed steel burner frames which I believe are for model 321, 335 Coleman lanterns and it may fit others models. Bottom diameter = 4-5/8" Height = 6¾" $10 each

categories:Sporting Goods

2125 impressions

370 views

Stock and bottom metal (hinge plate) are in great shape. Willing to ship at buyers expense. Message me if you have any questions. Not willing to separate as I have a new stock for the gun. Thanks! Fits all short action Remington 700

categories:Sporting GoodsGuns

4388 impressions

266 views

Hey, all! I am in search of a Remington 700, preferably chambered in: 7mm08, 6.5x55 or .30-06. Really anything less powerful than a .300 wm or 7mm mag. I would also prefer it to be pre-bankruptcy, (around 2006), and it needs to have a bottom metal, which the adl model lacks. If anyone has what im looking for, or very similar, like in .243 or something, we might be able to work something out. Please message me on either this website or my phone, 587 926 7510 . I am in Edmonton/devon area and am likely willing to make the drive. Also prefer to pay less than $1100. Thanks!

categories:Sporting GoodsGuns

11938 impressions

503 views

New H-S Precision Detachable Magazine trigger guard assembly (DBM) - Stainless finished in black. Upgrade your Remington 700 Short action BDL (Hinged floor plate system) with this aftermarket tough bottom metal. works with aftermarket clones (remington copy - bergera, christension arms etc.) but the stock inlet has to be patterned after the original Rem. 700 BDL hinged system to drop in. Shipping optional but at extra cost. Price is firm.

categories:Sporting GoodsGuns

4019 impressions

266 views

Weatherby Vanguard Synthetic 2 (was $900) -7mm Rem Mag -less than 40 rounds through the barrel, very accurate rifle for the price, just upgraded -26" Barrel, 1:9.5 twist -7.5lbs -polymer detachable mag conversion kit, holds five rounds instead of standard three round hinged floorplate (was $155) (have the original bottom metal with hinged floorplate to go along with) Ammo -33 rounds of 165gr Norma Bondstrike (20 was $99 -> $170 value) -29 rounds of 155gr Federal Terminal Ascent (20 was $80 -> $120 value) Rings -30mm Talley Rings on the Rifle (was $120) -Have 1" Talley Rings to go along with (was $110) Will sell with mounted and zeroed optic, or can remove optic: Vortex Diamondback Tactical FFP 4-16x (was $650) -44mm objective -30mm tube -FFP, EBR-2C reticle -adjustable parallax -exposed elevation and windage turrets

categories:Sporting GoodsGuns

5616 impressions

489 views

Howa Super Lite in 6.5 Creedmoor (was $1699) -approx 140 rounds through barrel -20" barrel, 1:8 twist -rifle is ONLY 4lb 7oz, with rings and scope 6lb! and 38-3/4" OAL -light and short, great for a bush gun -aftermarket aluminum bottom metal that uses factory polymer mag (factory bottom metal was plastic) (was $250) -aftermarket Backfire recoil pad (was $110) -picatinny adapter for use with bipod while still using sling stud -detachable 3 round polymer magazine Will separate optic: Burris Fullfield IV 3-12x42mm (was $450) -illuminated C4 Wind MOA reticle -1" talley rings (were $85)

categories:Sporting GoodsGuns

2326 impressions

369 views

Very nice condition Winchester m70 300wsm with crf action back up for your consideration after buyer flaked out. Would be $1700 plus tax new. This is a baco model meaning it was made by F.N in south Carolina making it one of the last U.S produced and highest quality Winchester m70's. You can have the best big game rifle ever developed for only $1050 Now $950 Or buy a new ruger American or similar disposable rifle. Seems like a no brainer to me ? SATIN FINISH GRADE I WALNUT STOCK WITH CUT CHECKERING and DELUXE CHEEKPIECE places your eye in perfect alignment with scope POLISHED METAL SURFACES add style and elegance STEEL SLING SWIVEL STUDS allow you to attach your favorite sling ALLOY ONE-PIECE BOTTOM METAL adds rigidity for better accuracy FORGED STEEL RECEIVER WITH INTEGRAL RECOIL LUG IS BEDDED FRONT AND REAR to eliminate shifts in zero for exceptional long-range accuracy PRE-’64 STYLE CONTROLLED ROUND FEED WITH CLAW EXTRACTOR fully controls the cartridge from magazine, to chamber, to ejection Three-Position Safety shows safety status at a glance RECESSED TARGET CROWN enhances accuracy and protects the rifling M.O.A. Trigger SYSTEM with zero take-up, zero creep and zero overtravel gives you outstanding accuracy Blade-Type Ejector for full control of ejection force PACHMAYR® DECELERATOR® RECOIL PAD for optimal protection against felt recoil I also have some ammo which I can include for half of retail prices if you would like it. Rifle comes with bases but not rings. Prefer text due to work schedule. 780-690-1037. May consider a partial trades on a decent but lower valued hunting optic and/or range finder.(sub $300) Located in valleyview but willing to travel a bit for a serious buyer or ship when thats a option again. Yes as much as I agree it's total b.s I will be verifying your pal which requires you to provide me with your pal #,name,d.o.b, and email or mailing address. Thank you.

categories:Sporting GoodsGuns

13231 impressions

923 views

Brand New In Box Hard to find and get your hands on one of these! • Calibre: .223 Wylde (5.56 NATO) • Action: Bolt • Barrel Length: 19" • Barrel Twist Rate: 1:8 • Barrel Profile: Full Profile Non-Fluted Barrel • Barrel Finish: Black Nitride • Handguard Length: 17" • Handguard Profile: V1 M-LOK Handguard • Receiver and Bottom Metal Material:  High quality, domestically sourced 6061-T6 alloy • Receiver and Bottom Metal Finish:  Hard Black Anodizing • Bolt Carrier Material:  HTSR 4140 steel • Bolt Carrier Finish:  QPQ Black Nitride • Muzzle Device: Threaded Muzzle Protector • Trigger: Mil-Spec Trigger Assembly • Furniture: • A2 polymer grip • Canuck 6-Position sliding buttstock • Weight: (Without Magazine) • 19" Barrel: 6lbs 12 oz • Overall Length Fully Assembled: (Collapsed Stock) • 19" Barrel: 34.75" $1800

categories:Sporting GoodsGuns

6411 impressions

781 views

Brand new Compatible with short action AICS (Accuracy International Chassis Systems) pattern bottom metal and cartridges built on a 0.470" case head such as 7.62x51/.308 Winchester, 7mm-08 Remington, 6.5mm Creedmoor, .260 Remington, .243 Winchester, and others Accepts a cartridge overall length of up to 2.86" Next-generation impact and crush resistant polymer construction Self-lubricating follower for increased reliability Long life stainless steel spring Paint pen dot matrix panels on the bottom of the body to allow for identification marking Flared floorplate aids magazine handling and is easy to disassemble for maintenance NOTE:  Not compatible with smaller base diameter cartridges such as .220 Swift, .223 Remington, .300 AAC Blackout, etc. or larger short action magnums. In addition, due to the wide variety and potential combinations of aftermarket receivers, stocks, chassis, and bottom metal that accept AICS pattern mags, minor fitting may be required. Not compatible with Accuracy International AE rifles or semi-auto platforms utilizing SR25/M110 pattern magazines.

categories:Sporting GoodsGuns

30062 impressions

663 views

338 Norma Magnum XXL High Country Hunter Rifle. Built By Blue Mountain Precision. Action: BMP ELRX by Defiance Machine, RH Barrel: Benchmark Cut-Rifled Carbon Fiber Sendero 9.5 Twist 27” Stock: Manners Composite Stocks EH1 Stock Hardware: Front Picatinny Rail Stock Color: Elite Tactical Moss Camo Trigger: TriggerTech Set @ 2.0 Lbs Muzzle Brake: BMP 4 Port Seamless Bottom Metals: Hawkins Precision Hunter DBM With 3 RD Magazine Finish: Cerakote Black Price Is For Rifle Only, Rifle Is Brand New, Has 30 Rounds Through It. Scope Is Zeiss Conquest V6 5-30X50 And Can Be Included For Additional Cost. Comes With 70 Loaded Rounds Of 300 Grain Berger Elite Hunters With Lapua Brass. Comes With 29 Pieces Of Once Fired Lapua Brass. Ph: (780) 404-9776

categories:Sporting GoodsGuns

4855 impressions

651 views

Tikka T3x compact stock with spacer and bottom metal. $250 plus actual shipping

categories:Sporting GoodsGuns

7006 impressions

396 views

M92 airsoft pistol is a replica of the beretta m92. This KWC M92 has a improved gas system. Pistol has full metal construction with a blowback system to make it 100% realistic. The pistol features a non slip horizontal strip trigger guard, and inclined stripe slide, and a non slip grip. Lanyard mount ring at bottom with attachment at bottom for a light / lazar. (Just want gone as have no use for it anymore. Am keen on discussing price) Gun Action: Semi / Full automatic FPS: 350-400 Magazine capacity: 22-rds Pros: Weight 1300g Length 210mm Hop up adjustable Construction metal slide / metal frame Powered by co2 Cons: Has a stripped magazine so will need a new magazine.

categories:Sporting GoodsPaintball and Airsoft

4006 impressions

455 views

One of a kind! Custom 300winmag. Took 5 years waiting on parts. Only 60 rounds through it. Stiller tac 300 action, 28” heavy profile fluted barrel by jury barrels. Big brake 2 turned and tuned for seamless look. Jewel trigger set at 4oz. (Crazy light and crisp) atlas bottom metal with 5round mag. Bell and Carlson adjustable cheek target stock (full length aluminum block ) stock has been bedded to the action. 20moa rail with a viper vortex pst gen 2 5-25x50. Total package costed valued at $6500. Will take 5000 or trade on a Mustang or Camaro. Messages only no calls

categories:Sporting GoodsGuns

4605 impressions

446 views

Bell & Carlson Tikka M40 heavy barrel inlet stock with adjustable cheekrest brown w black webbing and Tikka bottom metal plastic .Asking $ 325

categories:Sporting Goods

2431 impressions

447 views

Bergara B14 300 win mag, 24” medium weight barrel, Grayboe bottom metal, 2 metal mdt mags, 1 magpul mag, mdt rail and rings, mdt brake, timney trigger, vortex venom scope and caps, Hornady cheek rest Caldwell bipod, and around 250 rounds 208 eld-m hand loads that I got a buddy to load for it, looking to build a new long range rifle in 7mm PRC so this one’s on the chopping block, shoot me a message with offers, questions, or if you want more pictures. 403-317-4168

categories:Sporting GoodsGuns

20696 impressions

1303 views

New never fired, 338 Lapua Ackley Improved, Defiance rebel action, 40 moa rail, 30 inch Lija barrel, custom muzzle brake, Jewel trigger, Badger bottom metal with 2 five round mags, $4000 firm!, would defiantly prefer local meet up, will travel to you within reason, will not ship without prior payment. Claresholm AB, call or text 403-682-7788

categories:Sporting Goods

4520 impressions

595 views

HS-precision short action bottom metal

categories:Sporting Goods

1111 impressions

243 views

This is an Atlasworx bottom metal for Tikka T3X, and it is made out of actual metal. It is a drop in replacement (two screws to undo) for the factory plastic. This set up takes the factory Tikka mags flawlessly. I had it mounted on my .308 but I'm changing set-ups again. $140.00 plus shipping, or pick it up in person in Red Deer.

categories:Sporting GoodsGuns

15918 impressions

576 views

Winchester Model 1895 30-40 Krag Ref #1047 This Winchester is a lever action, sporting rifle, round barrel, shotgun style rear stock. Dated 1903. Stock is in good shape, forend has a few chips missing next to metal, the rear stock is excellent, finish is period correct. Original metal recoil pad fits well. Barrel is 28” long with period sights intact. Bore is nice and clean with minimal to no corrosion, excellent rifling top to bottom. Bluing appears original and app. 20% throughout. There are very few minor scratches on metal. Screws are mostly unused, one does appear to have seen a screwdriver but is in very good shape. The lever functions well, safety checks out and the trigger pull, and drop are good. Firing pin is evident. Ejector is intact and tight, and magazine follower is correct. Overall, I grade this firearm as very good and should be fully functional. I did not test with snap caps or fire. Only reasonable offers are considered. Low ball offers will not be responded to. Trades in person only. The firearms and accessories I sell may be new or used and are usually acquired through estate liquidations. I visually inspect them and check basic operation only and share what I know or find in the description and photos. They are not live test fired. I provide full disclosure on what I find but can not be held responsible for what I may miss. It is your responsibility to have your firearm inspected by a competent gunsmith before firing, shoot at your own risk. I am not a gunsmith. I do not warrantee these guns or any associated accessories, nor do I accept returns. They are, as is, where is, and all sales are final. On final purchase you have accepted full responsibility for the item. E-transfer or cash only. S/H & insurance are extra. Tracking number will be provided. I require your full name, PAL #, date of birth and email address for licence verification for firearms and ammunition. Thanks, Darcy Darcy's Estate Liquidations

categories:Sporting GoodsGuns

17567 impressions

662 views

Winchester Model 1894 38-55 Ref #1040 This Winchester is a lever action, sporting rifle, octagon barrel, full mag. Dated 1895 Stock is very good – good. Small tang crack 1” long, and a minor chip gone at tang. Forearm has an app. 2” crack and a few very minor cracks. The stock has typical bang marks. Finish appears original or period correct. Original metal recoil pad fits well. Barrel is 26” long with sights intact, rear sight may have been replaced at one time, again period correct. Bore has black powder corrosion but it’s clean now and has rifling top to bottom. Bluing appears original and app. 75-85% throughout. There are bumps and scratches on metal and evidence of minor surface rusting. Screws have been used, but in very good shape. The lever functions well, safety checks out and the trigger pull, and drop are good. Firing pin is evident and protrudes when pushed on. Ejector is intact and tight, and magazine follower functions correctly. Overall, I grade this firearm as very good and should be fully functional. I did not test with snap caps or fire. Only reasonable offers are considered. Low ball offers will not be responded to. Trades in person only. The firearms and accessories I sell may be new or used and are usually acquired through estate liquidations. I visually inspect them and check basic operation only and share what I know or find in the description and photos. They are not live test fired. I provide full disclosure on what I find but can not be held responsible for what I may miss. It is your responsibility to have your firearm inspected by a competent gunsmith before firing, shoot at your own risk. I am not a gunsmith. I do not warrantee these guns or any associated accessories, nor do I accept returns. They are, as is, where is, and all sales are final. On final purchase you have accepted full responsibility for the item. E-transfer or cash only. S/H & insurance are extra. Tracking number will be provided. I require your full name, PAL #, date of birth and email address for licence verification for firearms and ammunition. Thanks, Darcy Darcy's Estate Liquidations

categories:Sporting GoodsGuns

21607 impressions

733 views