- RARE Led Zeppelin 3 III Red Label First Pressing, Excellent SOLD - Black Sabbath - Black Sabbath, Poor SOLD - Black Sabbath - Master Of Reality - Vinyl Record LP 1971, SOLD - TEN YEARS AFTER Watt DERAM LP ,Fair $10 - Van Morrison Common One Vinyl Record Album Blue Eyed Soul LP, Excellent $20 - Daryl Hall - Three Hearts In The Happy Ending Machine 1986 Vinyl LP, Good $10 - Rod Stewart Every Picture Tells A Story LP 1971 Vinyl CLASSIC ED GOLD LABEL, SOLD - Rod Stewart /Faces Live Coast To Coast Overture and Beginners (Vinyl, LP 1973), Fair $10

categories:Household Items

1375 impressions

242 views

Used but in very good condition. All you need is there to start reloading ammos. Lee reloading press RCBS 5-0-5 Reloading sale Lee zip trim case Lee auto prime Lee safety primer feed RCBS case lube pad Lee case lube, new unopend RCBS burring tool RCBS shell holder X2, #6, #3 RCBS loading Block Lee funnel RCBS primer tray 2 Stainless Steel caliper Asking price is 395$ plus shipping. Thanks to look.

categories:Sporting GoodsGuns

13357 impressions

816 views

This is the easiest and cheapest way to size and lube the bullets as there is no nose punch needed and no special separate press.  You can use your standard single stage press.  Note that Lee no longer includes the ALOX lube in their kits.  Mine have the ALOX lube included.  From the Lee Precision website I stole the following quote: Fastest and easiest way to size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Intended for use on single stage presses only. The push through punch is used in place of a shell holder in the ram. To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox (sold separately), push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on. For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter. Ebay has these for $60 + $40 shipping.   Amazon: w/o lube for $40 - $90  and lube is $25 extra.  Located in Radisson Heights, Calgary  Or ship by Canada Post Flat Rate boxes.   Fill them up as much as possible up to 5kg.: 24.1 x 16.5 x 8.9cm.   $20 35 x 26 x 5cm.              $23 39 x 26 x 12cm.            $26 40 x 30 x 19cm.            $35 Will combine as much as possible to minimize shipping costs, including other classifieds I have posted. Cheers, Cody

categories:Sporting GoodsGuns

2507 impressions

237 views

Presses and cases for sale Please see the photos

categories:Sporting GoodsGuns

7552 impressions

864 views

I’m looking for one in 410 and 20 gauge. Please reply with model number and price. Call or text is best

categories:Sporting GoodsGuns

18600 impressions

1574 views

Selling/trading a Dillon Square Deal B progressive press. Overall it's in nice shape. Appears to be complete with the exception of the small plastic trays. Has 5 primer feeders. Has been used but not abused. Will come as seen with a set of .357 mag dies. One of the top plastic pieces has a crack in it which doesn't appear to affect function. Looking for $850. Not looking to ship at this time. Open to all trades. Can send more pictures upon request. Pm or text/call 204 795 2850 for more info.

categories:Sporting GoodsGuns

3813 impressions

333 views

Brand new Patented 1st shot pull-pierce technology – CO2 not punctured until 1st shot Up to 300 feet per second average projectile speed Ergonomic honeycomb grip for better control in all conditions Improved sights for faster target acquisition Straight trigger with a 6.5 lb. trigger pull weight on the second shot and smoother press Ambidextrous safe/fire switch that allows for easy toggling for both left-handed and right-handed individuals What's Included: The Byrna SD Canada Kit comes in a protective, zippered carrying case with everything you need to get started: - (1) Byrna SD Launcher - (2) 5-Round Magazines - (7) Byrna 8-Gram CO2 Cartridges - (1) 5ct Tube of Byrna Kinetic Projectiles - (1) 5ct Tube of Byrna Eco-Kinetic Projectiles - (1) 5ct Tube of Byrna Pro-Training (Inert) Projectiles - (1) 50ct Bag of Byrna Kinetic Projectiles - (1) #byrnanation Medallion NO PAL needed but has to be 18+ old to own it.

categories:Guns

11050 impressions

977 views

1 arbor press 1- 308 neck die 1- 6x47 (222mag) neck die 1- 6x47 bullet seater die 1- 22-250 neck die 1- 22-250 sizer die 1- 22-250 bullet seater die

categories:Sporting GoodsGuns

9567 impressions

430 views

Rentals, please contact for pricing, daily or weekly rates. Message or text only. LOG SPLITTER CORDED 120V CONSTRUCTION HEATER PROPANE 120V WATER PUMP GAS 2 INCH PRESSURE WASHER GAS PRESSURE WASHER CORDED PRESSURE WASHER GUTTER CLEANING WAND SNOWBLOWER 10HP LAWN MOWER, ELECTRIC BATTERY SMALL LAWN MOWER, ELECTRIC BATTERY LARGE SELF PROPELLED ROTOTOLLER/EDGER SMALL CORDED TRIMMER, STRING GAS TRIMMER, MULTI HEAD (EDGER, STRING, GRASS PADDLE) GENERATOR 6kw GAS GENERATOR 3kw GAS 120V PURE SINE LEAF BLOWER/VACUUM CORDED TABLE SAW SAWZALL CORDED LARGE CIRCULAR SAW JIGSAW SANDER PLANER DRILL PRESS BENCH-TOP 3/8 DRILL 1/2 INCH CORDED NAILER FRAMING, AIR NAILER BRAD, AIR LADDERS: 14 FT A-FRAME FIBERGLASS ELECTRICAL RATED - 12 FOOT COMBINATION - 10 FOOT A-FRAME ALUMINUM - 6 FOOT A-FRAME ALUMINUM HAND TRUCK SOLID TIRES LIFT TABLE/CART HYDRAULIC CART, PLATFORM CART, HOUSEKEEPING RUBBERMAID ENGINE STAND BALL JOINT PRESS KIT 3/4 INCH SOCKET SET AIR HAMMER LONG STROKE AIR HAMMER SHORT STROKE IMPACT GUN CORDED 1/2 FLOOR JACK JACK STANDS PORTAPOWER HYDRAULIC 10 TON VACUUM FLUID EXTRACTOR COME ALONG PORTABLE MANUAL WINCH SERVICE CART, 2 TRAY WELDER MIG 120V WELDER ARC 240V

categories:Tools and Equipment

1220 impressions

127 views

selling everything you need to reload 45Colt, Press, Dies gunpowder dispenser, scale, primers, brass(600), lead(230gr)(950) gunpowder, Text 587-888-9240

categories:Sporting GoodsGuns

910 impressions

74 views

I have 2 presses for sale $5250 each Dillion Precision Brass Processing Press Like New, Only Used to Test Setup $5250 obo each Dillion Precision CP2000 brass casing processing machine Dillion Precision variable speed automated case feeder, comes with mounting pole, small pistol plate, small rifle plate and case feeder mirror with flexible arm Numerous die plates for mounting individual calibres, without needing to remove to change calibres, including case trimmers and sizing/shaping dies being mounted, tool head conversion kits, brings casing sizing back into SAMMI spec Mark 7 Auto 1050 Pro motorization kit to fully automate CP2000 operation, touch screen operation LED light mounted to provide better viewing of process Work bench mounting plate FW Arms auto center decappers/poppers and swagers included, with replacement pins Discharge tube for primers Discharge chute for brass and receiving container Manuals, spare parts, spare sensors, tools, machine dust cover All high quality equipment and replacement parts, no expense spared Press #1 Dies for Lyman 9 mm, Lyman .223 cal, Redding .300 cal AAC Blackout Press #2 Dies for Lyman 9 mm, Lyman .223 cal, Redding .308 cal Win 1 x 118 ml bottles of sheep Lanolin oil used for casing lube during processing Contact Mike Logan cell 587-984-5851, mikelogan33833@yahoo.ca

categories:Sporting GoodsGuns

5462 impressions

341 views

1. 1947 COLEMAN LANTERN BRASS FUEL TANK POSSIBLY FOR MDL. 242 Used Coleman fuel tank dated 1947. Brass upper tank & fittings with steel bottom. Bare tank with no fuel caps or pump assembly. I believe this font is for a model 242 lantern but may fit others. Tank "Sunshine of the Night" trademark is below the filler hole and reads Coleman Canada 1947. I can not read the model number on the bottom. Bottom diameter to outer rim = 5" Height to top of fitting = 4" Original green, dents left of the filler hole & right of trademark, inside appears clean. $20 2. 1973 & 1974 COLEMAN CANADA FUEL TANKS Used Coleman Canada steel fuel tanks dated 1973 & 1974. Bare tank with no fuel caps or pump assembly. I'm not sure what model they fits but I believe it is for a model 335 Lantern and may fit others. Bottom diameter to outer rim = 5-3/8" Height to top of fitting = 4" Condition as shown ~ Coleman stickers are good; chipped original paint, metal is not dented. $15 Each 3. USED COLEMAN LANTERN BURNER FRAME & VALVE ASSEMBLIES - Two COLEMAN Brass Lantern Burner Assemblies I am not sure what they fit but I believe it is for a model 242 from the late 40's. Base is a metal, upper structure appears to be brass. Bottom diameter = 3¾"" Height = 6¼" $20 each - 3 COLEMAN Lantern Burner Frame & Valve assemblies Mdl 321, 335 & Maybe others Used pressed steel burner frames which I believe are for model 321, 335 Coleman lanterns and it may fit others models. Bottom diameter = 4-5/8" Height = 6¾" $10 each

categories:Sporting Goods

1693 impressions

316 views

Up for sale a very bright LED light for Dillon. Three models available: 1. Dillon 650/750 2. Dillin 550 3. Hornady Lock-N-Load AP Don't reload in the dark, this light gives a lot of light and sits in the center hole of the toolhead. Comes with a 12V power supply and a very bright Mini G4 LED Bulb 12V Spotlight with an average life of 30,000 hours. $50+shipping or picked up in NW Calgary Thanks K

categories:Tools and Equipment

497 impressions

110 views

Up for sale a gently used 9mm Dillon Carbide 3-Dies Set. Came with a press I recently purchased (have not used them myself). Box contains 3 dies: Sizing/Depriming Die with a Carbide ring, Bullet Seating Die, Crimp Die. Some marks on the lock rings, noting major. Asking $200 shipped (save on shipping and taxes), or picked up in NW Calgary Thanks

categories:Sporting Goods

273 impressions

88 views

RCBS precisioneered reloading Rock chucked supreme tm Master reloading kit

categories:Other

399 impressions

124 views

Like new Dillon XL650 set up for 40 S&W and includes complete 9mm tool head with dies and caliber conversion kit. Includes machine mount, Dillon case feeder, blue Armanov free floating tool head, Redding micrometer dies (competition seating die), ergonomic machine arm, low primer alarm, and Double Alpha LED lights for better visibility. Includes Double Alpha low powder alarm, Armanov roller indexing cam block/primer stop, spent primer shoot, magnetic primer block and measure powder knob. Spare 9mm (original Dillon) tool head comes equipped with spare powered measure/dump assembly with Armanov quick release and powder measure knob. Set up and ready to go. Asking $2,300 obo

categories:Sporting GoodsGuns

2711 impressions

146 views

Like new Dillon XL650 with less than 5,000 rounds through it. Comes set up for 9mm Luger. Includes machine mount, Dillon variable speed case feeder, blue Armanov free floating tool head, Redding micrometer dies (competition seating die), ergonomic machine arm, low primer alarm, and Double Alpha LED lights for better visibility. Includes Armanov roller indexing cam block/primer stop, spent primer shoot, and measure powder knob. Includes a spare (original Dillon) tool head with carbide sizing die for depriming as well as original Allen key tool set. Set up with an Eemanntech powder measure return spring, assembled and ready to go. Asking $2,250 obo

categories:Sporting GoodsGuns

2656 impressions

154 views

2 new never used 4000 psi hoses, and 2 used Hi temp shorter hoses for pressure washer/ Hotsy steamer. Offers, plz TXT 403-321-0185

categories:Tools and Equipment

6296 impressions

725 views

Price is firm. No discounts. No trades. For pickup in northeast Edmonton off manning drive and 153 Ave NW. If shipping is required out of town, we can discuss that. If you are interested in seeing all that I have for sale please search here in townpost for "mellonRSCA". Please note that my list will be updated several times a week, so check back regularly. Thank you

categories:Sporting Goods

569 impressions

191 views

If you’ve ever fought with stuck or stubborn older-style Lee dies, this little tool makes life a lot easier. My disabled daughter and I printed these to keep at each press station, and they’ve become a staple in our reloading workflow. Designed for older-style Lee dies (non-hex lock rings) Lightweight, durable PLA Perfect for quick adjustments without marring your dies Compact enough to hang on a peg or keep by the press 👉 $5 each — Veteran printed 🇨🇦 👉 Help support a Canadian Army veteran and his disabled daughter 👉 Visit my other ads: https://townpost.ca/user/younggunscanada

categories:Sporting GoodsGuns

2148 impressions

175 views

I run three Lee 4-Hole Turret Presses for case prep and general reloading. To keep my workspace organized, my disabled daughter and I printed these wall-mounted turret racks — they turned out great, so we printed extras to share. They’re perfect for light-duty use and free up valuable bench space, keeping your turrets neatly displayed and easy to swap out. Available in red, black, and blue. Printed from durable PLA filament. Designed for the Lee 4-Hole Turret Press. 👉 $10 each or 3 for $25 — Veteran printed 🇨🇦 👉 Help support a Canadian Army veteran and his disabled daughter 👉 Check out my other ads: https://townpost.ca/user/younggunscanada

categories:Sporting GoodsGuns

1910 impressions

227 views