Weatherby Mark V Accumark 30-06 Spr. Cerakote Tan Rifle.24 inch threaded fluted #3 contour barrel,ready for muzzle brake, Fluted Bolt, hand-laid fiberglass stock with aluminum bedding blocks. All Mark V® rifles are guaranteed to shoot a 3-shot group of .99” or less at 100 yards (SUB-MOA) from a cold barrel when used with Weatherby® factory or premium ammunition.Cerakote is the industry leading thin-film ceramic coating. The Cerakote unique formula enhances physical properties including wear, corrosion, and chemical resistance while improving impact strengths, and hardness.As new, unfired. Please send message to: medal1958@gmail.com

categories:Sporting GoodsGuns

22477 impressions

1814 views

Savage B17 FVSS 17 HMR Varmint Bolt Action Rifle, 21" Heavy Barrel,User-adjustable AccuTrigger,10 Rounds Rotary Magazine, Black Modern, ergonomic composite stock.Brand new in box. Local is preferred, but will ship at buyers expense. Further Lost insurance can be purchased by the buyer. Valid Pal a Must and will be verified for reference number. Please send message to: medal1958@gmail.com

categories:Sporting GoodsGuns

6757 impressions

479 views

01.Benelli Lupo 300 Win.Mag.Best Bolt action rifle.24 inch mazzle ready treaded barrel,scope bases installed. Excellent condition.-$1550.00 02.Benelli Lupo 30-06 Win.Mag.Best Bolt action rifle.22.5 inch mazzle ready treaded barrel,scope bases installed.Excellent condition.-$1550.00 Sub-MOA accuracy, advanced ergonomics, and shooting comfort have been carefully engineered into this chassis-style hunting rifle that allows for exclusive fit and customization out of the box. Lupo is Italian for wolf and the Benelli LUPO is destined to dominate the land the way Benelli’s Super Black Eagle dominates the skies. Local is preferred, but will ship at buyers expense. Valid Pal a Must. Please send message to: medal1958@gmail.com

categories:Sporting GoodsGuns

23533 impressions

1732 views

01.UTG Accushot 1-4X28 30mm Mill-dot Long Eye Relief Scope, 36-Color Circle Dot by AccuShot.With rings.-$160.00 02.Hakko Marksman 3-9X40,made in Japan, 1" tube-$130.00 Japan (used,good condition,some scrathes and marks) 03.Grizzly 3-9—32 -$50.00(used,good condition,only little rings marks) 04.Pursuit 6x24x44 with Side focus.Tactical Rifle Scope Adjustable Objective Mil-Dot Reticle Matte.-SOLD 05.NcSTAR Vism Sniper 1.1-4—24 Evolution Series Rifle Scope, Matte Black Finish with Illuminated P4 Sniper Reticle, 30mm Tube.-$200.00 brand new. 06.NcStar Shooter II 3-9x40mm Riflescope w/ Dual Illuminated P4 Sniper Reticle-Sold 07.Husqvarna Jaktoptik 4x32.Duplex type reticle.Rifle scope in matte black.-$80.00(made in Japan). 08.Weaver 3-10x40 Grand Slam Rifle Scope, Matte, Dual-X,Shows Some Wear From Use-$150.00 (Japan). 09.Cabela AR Rifle Scope 3X-12X44 with Side focus.223,Cabela's AR .223 Reticle,30mm Tube,4" - 3.7" Eye Relief,FOV36.7" - 9.2" @ 100 Yards,Matte Black,Red/green illumination with 5 intensity levels-SOLD 01.BSA Sweet 22-3-9X40 AO 3-9X40 Hunting Rifle Scope With Compensation,Duplex Reticle.-$120.00 02.NCStar 4×20 11mm mount-$30.00(used,excellent condition,some little marks) 03.Bushnell 4X Banner 22,11mm mount-$40.00 Japan(used,excellent condition,some marks) 04.BSA Red/Green dot,11mm mount-$50.00 Excellent. Local is preferred, but will ship at buyers expense. Further Lost insurance can be purchased by the buyer. Please send message to: medal1958@gmail.com

categories:Sporting GoodsGuns

56127 impressions

2025 views

Plano 1532 Pro-Max PillarLock Double Gun Case. The Plano Model 1532 Pro-Max PillarLock Double Gun Case is a large hardshell carrier for two rifles, and is capable of accommodating riflescopes with large objective lenses. The hardshell design is built to last, with thickened walls and patented PillarLock construction for additional crush resistance. Internal foam padding protects the contents from impacts, while tough tie-down straps prevent them from moving around during transport. The molded-in handle makes the case easy to carry, and it is both lockable and airline approved for security and convenience. The case fastens using six heavy-duty latches, keeping the lid securely closed. All Features: Padlock tabs Colour: black Weight: 7520g PillarLock technology Four tie-down webbing straps External dimensions:136.8cm (L) x 48.6cm (W) x 14.3cm (H) (approx) Interior Dimensions: 132cm (L) x 43cm (W) x 10cm (H) (approx) Local is preferred, but will ship at buyers expense.Further Lost insurance can be purchased by the buyer. Please send message to: medal1958@gmail.com

categories:Guns

7011 impressions

560 views

Magnificent rifle Antonio Zoli made in Italy. 30-06. With hard case, only used at the shooting range, 2- boxes.Bolt on the left side. In perfect condition, a magnificent beautiful wood . (New Hand forged knife. Skinner knife hardness 62. Handle Mammoth tusk blade Austrian steel Bohler. This is a bonus for those who buy AZ.).Browning carbon limited edition 7mm. Browning cenergy CX 12 gage. I would preferably want to sell everything together if the price would be higher separately. Super condition!!!! 9.9 from 10. All with boxes.

categories:Sporting GoodsGuns

148782 impressions

11543 views

For the collector is a 1871 Mauser DRESS bayonet. used in parades & ???. Not made to fit the rifle. Verry good condition. $ 285.00 plus shipping. could accept reasonable offer. See pics . email if you want more pics.

categories:Sporting GoodsGuns

3694 impressions

186 views

Non restricted revolver rifle with 9.8 inch barrel and 26.5 in overall length. Accepting both .45LC .45 ACP with moonclips, as well as .410 shot shells. The barrel is rifled, NOT smoothbore. Yes, this is new in box, never fired. Price is firm at $1200. Please text only. Thanks.

categories:Sporting GoodsGuns

3616 impressions

582 views

New gun slings asking $30 each

categories:Sporting GoodsGuns

23772 impressions

756 views

For sale brand new , X- Caliber Gauge Adapter made by Chiappa firearms. From 20 Ga to .357 Mag, 45 ACP, 9mm Luger and 410. All four are 7 " long and rifled. e-Transfer Shipping included.

categories:Other

12894 impressions

703 views

Howdy Townpost. I've got a number of these brand new Allen slings for sale. The slings I have here are an improvement over the regular Allen Endura. This batch of slings has cam buckles (sometimes called toggle clips) instead of tri-glides. They're easier to use and make attaching the webbing loops to sling swivels really quick and easy. The sling loop sections are longer and could even be used as a carry strap for small logs or something heavy in a pinch. The slings can be adjusted from 28" to 52" so they're quite versatile. The slings are $10 each. I'm currently offering a buy 3 get 1 free deal. The slings are located in SW Calgary and can be picked up almost anytime. I am also happy to ship nationwide, this is of course at the buyer's expense. Shipping these as regular or expedited parcels should be fairly cheap since I can roll up the sling into a little roll and put it into a very small box or mailer. I may be able to ship this as an oversized lettermail if I fold one or two slings flat and get them into a large envelope too. So I expect shipping to be $5-19 depending on what option you go with, where the is the package destination and how many slings you want.

categories:Sporting GoodsGuns

16681 impressions

447 views

Howdy Townpost. This is a fine English pocket or coat pistol made by Hollis and Sheath company which is the precursor to Hollis and Sons or Isaac Hollis and Sons. Wallace and sheath became Hollis and Sons in 1861 when Isaac Brentnall Sheath left the company to immigrate to Canterbury, Australia and raised sheep and owned coal mines in an area that is now a suburb of Melbourne. His gun making days were behind him, he'd become an industrialist down undah. Sheath & Hollis co-founded the company in 1849 and Sheath stayed with the company until as previously stated, 1861. That dates this firearm between 1849 and 1861. This is a single shot side hammer lock percussion pistol. It's a screw-barrel meaning you unthread the barrel, fill the powder chamber and place a ball on top it. You then use the barrel itself and the threads to seat the ball inside of the breach. Then a percussion cap on the nipple, put it at half cock put it in your dapper overcoat and pull it out should you meet any Scallywags on your travels. The gun is mechanically excellent. The bore condition is very good, there is some minor shallow pitting but overall the rifling is very sharp and clean and shiny. The overall exterior condition of the metal and wood is in excellent shape the diamond checkering are sharp and defined. The powder chamber has only minor pitting as pictured and was cleaned out internally. For a defensive coat pistol, the sights are excellent and easy to pick up and with a rifled bore in good condition I expect this pistol could be fired very accurately. To shoot this gun I would use 3F powder. Both number 10 and 11 caps fit the nipple reasonably well. A 40 caliber lead ball would be ideal as a projectile but you could definitely use .375 caliber balls with a patch no problem in my opinion. I haven't tried it myself though. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:Sporting GoodsGuns

10502 impressions

271 views

Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.

categories:Sporting GoodsGuns

19818 impressions

730 views

Howdy Townpost. I have a really interesting piece for you here. This is a conversion of a conversion rifle. This is a German made Ludwig Loewe Gew 88 that was later converted by the Germans into a Gew 88/05 and most likely given to the Ottomans in WWI as war aid. Many of these were retained and later converted in the 1930's to a Mauser 1935 pattern type rifle. They converted a large portion of their arsenal to this pattern including SMLE's a plethora of their different Mausers, and Gew 88's they had in inventory. This rifle was rebarreled to shoot the modern 8mm Mauser cartridge and re-stocked into a more Mauser-esq stock. This stock features Mauser bolt disassembly disks despite them not being required for the Gew 88 action. The stock on this particular example had a fairly large wood defect that the Turks neglected to address has been fixed. It was cleaned out and filled with Brownells Acraglas epoxy so it's rock solid now. The overall condition is good. The stock was professionally refinished. The bore is excellent, very sharp and clean rifling. The rifle is located in Calgary AB for pickup or I can ship it nationwide on the buyer's dime. PAL will be verified as per C-71

categories:Sporting GoodsGuns

7873 impressions

578 views

Howdy Townpost. I have here a nicely restored Cooey Model 82. I got the gun as an oil stained and sporterized target .22. It's had the stock nicely refinished in a satin urethane finish done in the fashion to mimic an old oil finished stock. The stock has a pretty nice grain pattern on the underside of it (pictured). The bore is excellent. The stock had a chunk out of it to accomodate a Lyman peep-sight and the receiver was drilled and tapped for it as well. That has all been repaired (pictured) and is hardly noticeable now. There was a hairline crack near the middle barrel band that was filled too. It probably wasn't necessary to fill especially on a .22 , but hey she's been filled. It has all the C-broad arrow markings present. The rifle is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. If you live in Alberta I do get around the province a fair bit throughout the year, so if I happen to be heading to your area maybe we can do a meet up along the way on my travels to save you the shipping costs. PAL will be verified as per C-71.

categories:Sporting GoodsGuns

16709 impressions

635 views

Many Czech produced post-war Mausers were made with mostly late war and some newly produced parts. These were sold to various different militaries and on the commercial market many and of these were sold to the Israelis as well. The rifle features many late war stamped parts including the oversized winter trigger guard but does include a half size cleaning rod unlike the Kriegsmodell K98's produced by the Germans. It does not have a stock disk, as it just has a hole drilled in the butt cap for disassembly of the bolt. This particular example has a low serial number, but the serial number ranges are all over because of different contracts. The whole gun matches with the new forced match serial number. It has a scrubbed receiver, and has a beech wood stock and handguard in a nice brown color. The rifle bore is actually in very good shape, but there is some stubborn fouling stuck in there and I don't have a 32 Caliber cleaning brush to remove it but I'm sure if you use the proper brush it should come out pretty easy since it's not rust. Just shooting the rifle might even remove it. The muzzle crown is an excellent condition as pictured. The rifle does have minor some stock damage. It looks like a vice dent or some sort of hammering pattern, but it's only on the one side (pictured). Overall the gun is in very good original condition and the action is nice and smooth and it is unfired by me. This is a nice unique example of a k98 made by Brno, who is very well known for their quality produced firearms. The rifle is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. If you live in Alberta I do get around the province a fair bit throughout the year, so if I happen to be heading to your area maybe we can do a meet up along the way on my travels to save you the shipping costs. PAL will be verified as per C-71.

categories:Sporting GoodsGuns

15989 impressions

957 views

Red Dot mount for Win 94 lever gun. This is the cleanest and easiest way to add a red dot to your rifle. If you have the AE version use two bolts to secure via the front scope mount holes. If not, any competent gunsmith can drill/ tap two  holes easily.  fits RMR footprint,  (2) available,  $100 shipped.  *please see my other ads*  

categories:Sporting GoodsGuns

7983 impressions

201 views

For Sale - one bag of 100 pieces of new, unopened Starline 454 Casull unprimed brass. Perfect for that special pistol or rifle... WAS $125 $110 (new price) per bag - firm! No offers or trades 100 pieces per bag / 1 bags available Brand new unprimed - unfired 100 pieces / hard to find new brass anywhere EMT (shipped) or cash (at pickup) - pick up available by appointment only, house drop box or shipped at buyers expense by Canada Post within Canada only. Small package/tracked - $22 to all provinces

categories:Sporting GoodsGuns

14492 impressions

799 views

Looking to BUY Garand parts: - Receivers - Bolts - Oprods - Trigger Guards Don't need anything collectible or rare. Just assembling some rifles from parts. Can pay to ship or arrange pick up

categories:Sporting GoodsGuns

9656 impressions

332 views

Hi, selling a custom made 3 port muzzle brake for large calibre rifles. tread pitch is standard 5/8-24. brake is large enough to fit calibres up to .45cal. made of stainless steel, black nitrided, Up to 80% recoil reduction. two adjustable vertical rise screws included, and 5/8" crush washer also included. 4.5" long, 2 inch wide, and 1.25inch tall (aproxx) aprox 1lb. in weight. I shoot it with my 300PRC and 30-06, its loud as #$%#$ but almost no felt recoil! makes my 300prc feel like a 223. limited production run, 2 left of 10 price is $250-OBO

categories:Sporting GoodsGuns

24335 impressions

938 views

Old and original shape weaver rifle scope. Very good shape, and rare. Is made from steel, not aluminum. Works good, just tested it on my rifle. Scope rings not included, but could be for extra 50$( steel medium high rings Burris brand.)

categories:Sporting GoodsGuns

32773 impressions

2207 views